ARM: at91: remove at91sam9g45/9m10 legacy board support

Remove legacy support for at91sam9g45/9m10 boards.
This include board files removal plus all legacy code for non DT boards
support (i.e. at91sam9g45.c and at91sam9g45_devices.c).
Use the Device Tree for running this board with newer kernels.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
[nicolas.ferre@atmel.com: Add sentence about DT, removed defconfig]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

1 files changed, 0 insertions, 1915 deletions

diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
deleted file mode 100644
index 21ab782cc8e9..000000000000
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ /dev/null
@@ -1,1915 +0,0 @@
-/*
- *  On-Chip devices setup code for the AT91SAM9G45 family
- *
- *  Copyright (C) 2009 Atmel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/i2c-gpio.h>
-#include <linux/atmel-mci.h>
-#include <linux/platform_data/crypto-atmel.h>
-
-#include <linux/platform_data/at91_adc.h>
-
-#include <linux/fb.h>
-#include <video/atmel_lcdc.h>
-
-#include <mach/at91sam9g45.h>
-#include <mach/at91sam9g45_matrix.h>
-#include <mach/at91_matrix.h>
-#include <mach/at91sam9_smc.h>
-#include <linux/platform_data/dma-atmel.h>
-#include <mach/atmel-mci.h>
-#include <mach/hardware.h>
-
-#include <media/atmel-isi.h>
-
-#include "board.h"
-#include "generic.h"
-#include "clock.h"
-#include "gpio.h"
-
-
-/* --------------------------------------------------------------------
- *  HDMAC - AHB DMA Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
-static u64 hdmac_dmamask = DMA_BIT_MASK(32);
-
-static struct resource hdmac_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_DMA,
-		.end	= AT91SAM9G45_BASE_DMA + SZ_512 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_DMA,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_DMA,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at_hdmac_device = {
-	.name		= "at91sam9g45_dma",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &hdmac_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= hdmac_resources,
-	.num_resources	= ARRAY_SIZE(hdmac_resources),
-};
-
-void __init at91_add_device_hdmac(void)
-{
-	platform_device_register(&at_hdmac_device);
-}
-#else
-void __init at91_add_device_hdmac(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  USB Host (OHCI)
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static u64 ohci_dmamask = DMA_BIT_MASK(32);
-static struct at91_usbh_data usbh_ohci_data;
-
-static struct resource usbh_ohci_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_OHCI_BASE,
-		.end	= AT91SAM9G45_OHCI_BASE + SZ_1M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_UHPHS,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_UHPHS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91_usbh_ohci_device = {
-	.name		= "at91_ohci",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &ohci_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &usbh_ohci_data,
-	},
-	.resource	= usbh_ohci_resources,
-	.num_resources	= ARRAY_SIZE(usbh_ohci_resources),
-};
-
-void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data)
-{
-	int i;
-
-	if (!data)
-		return;
-
-	/* Enable VBus control for UHP ports */
-	for (i = 0; i < data->ports; i++) {
-		if (gpio_is_valid(data->vbus_pin[i]))
-			at91_set_gpio_output(data->vbus_pin[i],
-					     data->vbus_pin_active_low[i]);
-	}
-
-	/* Enable overcurrent notification */
-	for (i = 0; i < data->ports; i++) {
-		if (gpio_is_valid(data->overcurrent_pin[i]))
-			at91_set_gpio_input(data->overcurrent_pin[i], 1);
-	}
-
-	usbh_ohci_data = *data;
-	platform_device_register(&at91_usbh_ohci_device);
-}
-#else
-void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  USB Host HS (EHCI)
- *  Needs an OHCI host for low and full speed management
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE)
-static u64 ehci_dmamask = DMA_BIT_MASK(32);
-static struct at91_usbh_data usbh_ehci_data;
-
-static struct resource usbh_ehci_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_EHCI_BASE,
-		.end	= AT91SAM9G45_EHCI_BASE + SZ_1M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_UHPHS,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_UHPHS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91_usbh_ehci_device = {
-	.name		= "atmel-ehci",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &ehci_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &usbh_ehci_data,
-	},
-	.resource	= usbh_ehci_resources,
-	.num_resources	= ARRAY_SIZE(usbh_ehci_resources),
-};
-
-void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data)
-{
-	int i;
-
-	if (!data)
-		return;
-
-	/* Enable VBus control for UHP ports */
-	for (i = 0; i < data->ports; i++) {
-		if (gpio_is_valid(data->vbus_pin[i]))
-			at91_set_gpio_output(data->vbus_pin[i],
-					     data->vbus_pin_active_low[i]);
-	}
-
-	usbh_ehci_data = *data;
-	platform_device_register(&at91_usbh_ehci_device);
-}
-#else
-void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  USB HS Device (Gadget)
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
-static struct resource usba_udc_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_UDPHS_FIFO,
-		.end	= AT91SAM9G45_UDPHS_FIFO + SZ_512K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9G45_BASE_UDPHS,
-		.end	= AT91SAM9G45_BASE_UDPHS + SZ_1K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[2] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_UDPHS,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_UDPHS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-#define EP(nam, idx, maxpkt, maxbk, dma, isoc)			\
-	[idx] = {						\
-		.name		= nam,				\
-		.index		= idx,				\
-		.fifo_size	= maxpkt,			\
-		.nr_banks	= maxbk,			\
-		.can_dma	= dma,				\
-		.can_isoc	= isoc,				\
-	}
-
-static struct usba_ep_data usba_udc_ep[] __initdata = {
-	EP("ep0", 0, 64, 1, 0, 0),
-	EP("ep1", 1, 1024, 2, 1, 1),
-	EP("ep2", 2, 1024, 2, 1, 1),
-	EP("ep3", 3, 1024, 3, 1, 0),
-	EP("ep4", 4, 1024, 3, 1, 0),
-	EP("ep5", 5, 1024, 3, 1, 1),
-	EP("ep6", 6, 1024, 3, 1, 1),
-};
-
-#undef EP
-
-/*
- * pdata doesn't have room for any endpoints, so we need to
- * append room for the ones we need right after it.
- */
-static struct {
-	struct usba_platform_data pdata;
-	struct usba_ep_data ep[7];
-} usba_udc_data;
-
-static struct platform_device at91_usba_udc_device = {
-	.name		= "atmel_usba_udc",
-	.id		= -1,
-	.dev		= {
-				.platform_data	= &usba_udc_data.pdata,
-	},
-	.resource	= usba_udc_resources,
-	.num_resources	= ARRAY_SIZE(usba_udc_resources),
-};
-
-void __init at91_add_device_usba(struct usba_platform_data *data)
-{
-	usba_udc_data.pdata.vbus_pin = -EINVAL;
-	usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
-	memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));
-
-	if (data && gpio_is_valid(data->vbus_pin)) {
-		at91_set_gpio_input(data->vbus_pin, 0);
-		at91_set_deglitch(data->vbus_pin, 1);
-		usba_udc_data.pdata.vbus_pin = data->vbus_pin;
-	}
-
-	/* Pullup pin is handled internally by USB device peripheral */
-
-	platform_device_register(&at91_usba_udc_device);
-}
-#else
-void __init at91_add_device_usba(struct usba_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  Ethernet
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
-static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct macb_platform_data eth_data;
-
-static struct resource eth_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_EMAC,
-		.end	= AT91SAM9G45_BASE_EMAC + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_EMAC,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_EMAC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_eth_device = {
-	.name		= "macb",
-	.id		= -1,
-	.dev		= {
-				.dma_mask		= &eth_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &eth_data,
-	},
-	.resource	= eth_resources,
-	.num_resources	= ARRAY_SIZE(eth_resources),
-};
-
-void __init at91_add_device_eth(struct macb_platform_data *data)
-{
-	if (!data)
-		return;
-
-	if (gpio_is_valid(data->phy_irq_pin)) {
-		at91_set_gpio_input(data->phy_irq_pin, 0);
-		at91_set_deglitch(data->phy_irq_pin, 1);
-	}
-
-	/* Pins used for MII and RMII */
-	at91_set_A_periph(AT91_PIN_PA17, 0);	/* ETXCK_EREFCK */
-	at91_set_A_periph(AT91_PIN_PA15, 0);	/* ERXDV */
-	at91_set_A_periph(AT91_PIN_PA12, 0);	/* ERX0 */
-	at91_set_A_periph(AT91_PIN_PA13, 0);	/* ERX1 */
-	at91_set_A_periph(AT91_PIN_PA16, 0);	/* ERXER */
-	at91_set_A_periph(AT91_PIN_PA14, 0);	/* ETXEN */
-	at91_set_A_periph(AT91_PIN_PA10, 0);	/* ETX0 */
-	at91_set_A_periph(AT91_PIN_PA11, 0);	/* ETX1 */
-	at91_set_A_periph(AT91_PIN_PA19, 0);	/* EMDIO */
-	at91_set_A_periph(AT91_PIN_PA18, 0);	/* EMDC */
-
-	if (!data->is_rmii) {
-		at91_set_B_periph(AT91_PIN_PA29, 0);	/* ECRS */
-		at91_set_B_periph(AT91_PIN_PA30, 0);	/* ECOL */
-		at91_set_B_periph(AT91_PIN_PA8,  0);	/* ERX2 */
-		at91_set_B_periph(AT91_PIN_PA9,  0);	/* ERX3 */
-		at91_set_B_periph(AT91_PIN_PA28, 0);	/* ERXCK */
-		at91_set_B_periph(AT91_PIN_PA6,  0);	/* ETX2 */
-		at91_set_B_periph(AT91_PIN_PA7,  0);	/* ETX3 */
-		at91_set_B_periph(AT91_PIN_PA27, 0);	/* ETXER */
-	}
-
-	eth_data = *data;
-	platform_device_register(&at91sam9g45_eth_device);
-}
-#else
-void __init at91_add_device_eth(struct macb_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  MMC / SD
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
-static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct mci_platform_data mmc0_data, mmc1_data;
-
-static struct resource mmc0_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_MCI0,
-		.end	= AT91SAM9G45_BASE_MCI0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_MCI0,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_MCI0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_mmc0_device = {
-	.name		= "atmel_mci",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &mmc_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &mmc0_data,
-	},
-	.resource	= mmc0_resources,
-	.num_resources	= ARRAY_SIZE(mmc0_resources),
-};
-
-static struct resource mmc1_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_MCI1,
-		.end	= AT91SAM9G45_BASE_MCI1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_MCI1,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_MCI1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_mmc1_device = {
-	.name		= "atmel_mci",
-	.id		= 1,
-	.dev		= {
-				.dma_mask		= &mmc_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &mmc1_data,
-	},
-	.resource	= mmc1_resources,
-	.num_resources	= ARRAY_SIZE(mmc1_resources),
-};
-
-/* Consider only one slot : slot 0 */
-void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
-{
-
-	if (!data)
-		return;
-
-	/* Must have at least one usable slot */
-	if (!data->slot[0].bus_width)
-		return;
-
-#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
-	{
-	struct at_dma_slave	*atslave;
-	struct mci_dma_data	*alt_atslave;
-
-	alt_atslave = kzalloc(sizeof(struct mci_dma_data), GFP_KERNEL);
-	atslave = &alt_atslave->sdata;
-
-	/* DMA slave channel configuration */
-	atslave->dma_dev = &at_hdmac_device.dev;
-	atslave->cfg = ATC_FIFOCFG_HALFFIFO
-			| ATC_SRC_H2SEL_HW | ATC_DST_H2SEL_HW;
-	if (mmc_id == 0)	/* MCI0 */
-		atslave->cfg |= ATC_SRC_PER(AT_DMA_ID_MCI0)
-			      | ATC_DST_PER(AT_DMA_ID_MCI0);
-
-	else			/* MCI1 */
-		atslave->cfg |= ATC_SRC_PER(AT_DMA_ID_MCI1)
-			      | ATC_DST_PER(AT_DMA_ID_MCI1);
-
-	data->dma_slave = alt_atslave;
-	}
-#endif
-
-
-	/* input/irq */
-	if (gpio_is_valid(data->slot[0].detect_pin)) {
-		at91_set_gpio_input(data->slot[0].detect_pin, 1);
-		at91_set_deglitch(data->slot[0].detect_pin, 1);
-	}
-	if (gpio_is_valid(data->slot[0].wp_pin))
-		at91_set_gpio_input(data->slot[0].wp_pin, 1);
-
-	if (mmc_id == 0) {		/* MCI0 */
-
-		/* CLK */
-		at91_set_A_periph(AT91_PIN_PA0, 0);
-
-		/* CMD */
-		at91_set_A_periph(AT91_PIN_PA1, 1);
-
-		/* DAT0, maybe DAT1..DAT3 and maybe DAT4..DAT7 */
-		at91_set_A_periph(AT91_PIN_PA2, 1);
-		if (data->slot[0].bus_width == 4) {
-			at91_set_A_periph(AT91_PIN_PA3, 1);
-			at91_set_A_periph(AT91_PIN_PA4, 1);
-			at91_set_A_periph(AT91_PIN_PA5, 1);
-			if (data->slot[0].bus_width == 8) {
-				at91_set_A_periph(AT91_PIN_PA6, 1);
-				at91_set_A_periph(AT91_PIN_PA7, 1);
-				at91_set_A_periph(AT91_PIN_PA8, 1);
-				at91_set_A_periph(AT91_PIN_PA9, 1);
-			}
-		}
-
-		mmc0_data = *data;
-		platform_device_register(&at91sam9g45_mmc0_device);
-
-	} else {			/* MCI1 */
-
-		/* CLK */
-		at91_set_A_periph(AT91_PIN_PA31, 0);
-
-		/* CMD */
-		at91_set_A_periph(AT91_PIN_PA22, 1);
-
-		/* DAT0, maybe DAT1..DAT3 and maybe DAT4..DAT7 */
-		at91_set_A_periph(AT91_PIN_PA23, 1);
-		if (data->slot[0].bus_width == 4) {
-			at91_set_A_periph(AT91_PIN_PA24, 1);
-			at91_set_A_periph(AT91_PIN_PA25, 1);
-			at91_set_A_periph(AT91_PIN_PA26, 1);
-			if (data->slot[0].bus_width == 8) {
-				at91_set_A_periph(AT91_PIN_PA27, 1);
-				at91_set_A_periph(AT91_PIN_PA28, 1);
-				at91_set_A_periph(AT91_PIN_PA29, 1);
-				at91_set_A_periph(AT91_PIN_PA30, 1);
-			}
-		}
-
-		mmc1_data = *data;
-		platform_device_register(&at91sam9g45_mmc1_device);
-
-	}
-}
-#else
-void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  NAND / SmartMedia
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
-static struct atmel_nand_data nand_data;
-
-#define NAND_BASE	AT91_CHIPSELECT_3
-
-static struct resource nand_resources[] = {
-	[0] = {
-		.start	= NAND_BASE,
-		.end	= NAND_BASE + SZ_256M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= AT91SAM9G45_BASE_ECC,
-		.end	= AT91SAM9G45_BASE_ECC + SZ_512 - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device at91sam9g45_nand_device = {
-	.name		= "atmel_nand",
-	.id		= -1,
-	.dev		= {
-				.platform_data	= &nand_data,
-	},
-	.resource	= nand_resources,
-	.num_resources	= ARRAY_SIZE(nand_resources),
-};
-
-void __init at91_add_device_nand(struct atmel_nand_data *data)
-{
-	unsigned long csa;
-
-	if (!data)
-		return;
-
-	csa = at91_matrix_read(AT91_MATRIX_EBICSA);
-	at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
-
-	/* enable pin */
-	if (gpio_is_valid(data->enable_pin))
-		at91_set_gpio_output(data->enable_pin, 1);
-
-	/* ready/busy pin */
-	if (gpio_is_valid(data->rdy_pin))
-		at91_set_gpio_input(data->rdy_pin, 1);
-
-	/* card detect pin */
-	if (gpio_is_valid(data->det_pin))
-		at91_set_gpio_input(data->det_pin, 1);
-
-	nand_data = *data;
-	platform_device_register(&at91sam9g45_nand_device);
-}
-#else
-void __init at91_add_device_nand(struct atmel_nand_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  TWI (i2c)
- * -------------------------------------------------------------------- */
-
-/*
- * Prefer the GPIO code since the TWI controller isn't robust
- * (gets overruns and underruns under load) and can only issue
- * repeated STARTs in one scenario (the driver doesn't yet handle them).
- */
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
-static struct i2c_gpio_platform_data pdata_i2c0 = {
-	.sda_pin		= AT91_PIN_PA20,
-	.sda_is_open_drain	= 1,
-	.scl_pin		= AT91_PIN_PA21,
-	.scl_is_open_drain	= 1,
-	.udelay			= 5,		/* ~100 kHz */
-};
-
-static struct platform_device at91sam9g45_twi0_device = {
-	.name			= "i2c-gpio",
-	.id			= 0,
-	.dev.platform_data	= &pdata_i2c0,
-};
-
-static struct i2c_gpio_platform_data pdata_i2c1 = {
-	.sda_pin		= AT91_PIN_PB10,
-	.sda_is_open_drain	= 1,
-	.scl_pin		= AT91_PIN_PB11,
-	.scl_is_open_drain	= 1,
-	.udelay			= 5,		/* ~100 kHz */
-};
-
-static struct platform_device at91sam9g45_twi1_device = {
-	.name			= "i2c-gpio",
-	.id			= 1,
-	.dev.platform_data	= &pdata_i2c1,
-};
-
-void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
-{
-	i2c_register_board_info(i2c_id, devices, nr_devices);
-
-	if (i2c_id == 0) {
-		at91_set_GPIO_periph(AT91_PIN_PA20, 1);		/* TWD (SDA) */
-		at91_set_multi_drive(AT91_PIN_PA20, 1);
-
-		at91_set_GPIO_periph(AT91_PIN_PA21, 1);		/* TWCK (SCL) */
-		at91_set_multi_drive(AT91_PIN_PA21, 1);
-
-		platform_device_register(&at91sam9g45_twi0_device);
-	} else {
-		at91_set_GPIO_periph(AT91_PIN_PB10, 1);		/* TWD (SDA) */
-		at91_set_multi_drive(AT91_PIN_PB10, 1);
-
-		at91_set_GPIO_periph(AT91_PIN_PB11, 1);		/* TWCK (SCL) */
-		at91_set_multi_drive(AT91_PIN_PB11, 1);
-
-		platform_device_register(&at91sam9g45_twi1_device);
-	}
-}
-
-#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
-static struct resource twi0_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_TWI0,
-		.end	= AT91SAM9G45_BASE_TWI0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_TWI0,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_TWI0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_twi0_device = {
-	.name		= "i2c-at91sam9g10",
-	.id		= 0,
-	.resource	= twi0_resources,
-	.num_resources	= ARRAY_SIZE(twi0_resources),
-};
-
-static struct resource twi1_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_TWI1,
-		.end	= AT91SAM9G45_BASE_TWI1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_TWI1,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_TWI1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_twi1_device = {
-	.name		= "i2c-at91sam9g10",
-	.id		= 1,
-	.resource	= twi1_resources,
-	.num_resources	= ARRAY_SIZE(twi1_resources),
-};
-
-void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
-{
-	i2c_register_board_info(i2c_id, devices, nr_devices);
-
-	/* pins used for TWI interface */
-	if (i2c_id == 0) {
-		at91_set_A_periph(AT91_PIN_PA20, 0);		/* TWD */
-		at91_set_A_periph(AT91_PIN_PA21, 0);		/* TWCK */
-
-		platform_device_register(&at91sam9g45_twi0_device);
-	} else {
-		at91_set_A_periph(AT91_PIN_PB10, 0);		/* TWD */
-		at91_set_A_periph(AT91_PIN_PB11, 0);		/* TWCK */
-
-		platform_device_register(&at91sam9g45_twi1_device);
-	}
-}
-#else
-void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  SPI
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-static u64 spi_dmamask = DMA_BIT_MASK(32);
-
-static struct resource spi0_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_SPI0,
-		.end	= AT91SAM9G45_BASE_SPI0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_SPI0,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_SPI0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_spi0_device = {
-	.name		= "atmel_spi",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &spi_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= spi0_resources,
-	.num_resources	= ARRAY_SIZE(spi0_resources),
-};
-
-static const unsigned spi0_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PB18, AT91_PIN_PB19, AT91_PIN_PD27 };
-
-static struct resource spi1_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_SPI1,
-		.end	= AT91SAM9G45_BASE_SPI1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_SPI1,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_SPI1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_spi1_device = {
-	.name		= "atmel_spi",
-	.id		= 1,
-	.dev		= {
-				.dma_mask		= &spi_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= spi1_resources,
-	.num_resources	= ARRAY_SIZE(spi1_resources),
-};
-
-static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB17, AT91_PIN_PD28, AT91_PIN_PD18, AT91_PIN_PD19 };
-
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
-{
-	int i;
-	unsigned long cs_pin;
-	short enable_spi0 = 0;
-	short enable_spi1 = 0;
-
-	/* Choose SPI chip-selects */
-	for (i = 0; i < nr_devices; i++) {
-		if (devices[i].controller_data)
-			cs_pin = (unsigned long) devices[i].controller_data;
-		else if (devices[i].bus_num == 0)
-			cs_pin = spi0_standard_cs[devices[i].chip_select];
-		else
-			cs_pin = spi1_standard_cs[devices[i].chip_select];
-
-		if (!gpio_is_valid(cs_pin))
-			continue;
-
-		if (devices[i].bus_num == 0)
-			enable_spi0 = 1;
-		else
-			enable_spi1 = 1;
-
-		/* enable chip-select pin */
-		at91_set_gpio_output(cs_pin, 1);
-
-		/* pass chip-select pin to driver */
-		devices[i].controller_data = (void *) cs_pin;
-	}
-
-	spi_register_board_info(devices, nr_devices);
-
-	/* Configure SPI bus(es) */
-	if (enable_spi0) {
-		at91_set_A_periph(AT91_PIN_PB0, 0);	/* SPI0_MISO */
-		at91_set_A_periph(AT91_PIN_PB1, 0);	/* SPI0_MOSI */
-		at91_set_A_periph(AT91_PIN_PB2, 0);	/* SPI0_SPCK */
-
-		platform_device_register(&at91sam9g45_spi0_device);
-	}
-	if (enable_spi1) {
-		at91_set_A_periph(AT91_PIN_PB14, 0);	/* SPI1_MISO */
-		at91_set_A_periph(AT91_PIN_PB15, 0);	/* SPI1_MOSI */
-		at91_set_A_periph(AT91_PIN_PB16, 0);	/* SPI1_SPCK */
-
-		platform_device_register(&at91sam9g45_spi1_device);
-	}
-}
-#else
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  AC97
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
-static u64 ac97_dmamask = DMA_BIT_MASK(32);
-static struct ac97c_platform_data ac97_data;
-
-static struct resource ac97_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_AC97C,
-		.end	= AT91SAM9G45_BASE_AC97C + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AC97C,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AC97C,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_ac97_device = {
-	.name		= "atmel_ac97c",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &ac97_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &ac97_data,
-	},
-	.resource	= ac97_resources,
-	.num_resources	= ARRAY_SIZE(ac97_resources),
-};
-
-void __init at91_add_device_ac97(struct ac97c_platform_data *data)
-{
-	if (!data)
-		return;
-
-	at91_set_A_periph(AT91_PIN_PD8, 0);	/* AC97FS */
-	at91_set_A_periph(AT91_PIN_PD9, 0);	/* AC97CK */
-	at91_set_A_periph(AT91_PIN_PD7, 0);	/* AC97TX */
-	at91_set_A_periph(AT91_PIN_PD6, 0);	/* AC97RX */
-
-	/* reset */
-	if (gpio_is_valid(data->reset_pin))
-		at91_set_gpio_output(data->reset_pin, 0);
-
-	ac97_data = *data;
-	platform_device_register(&at91sam9g45_ac97_device);
-}
-#else
-void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
-#endif
-
-/* --------------------------------------------------------------------
- *  Image Sensor Interface
- * -------------------------------------------------------------------- */
-#if defined(CONFIG_VIDEO_ATMEL_ISI) || defined(CONFIG_VIDEO_ATMEL_ISI_MODULE)
-static u64 isi_dmamask = DMA_BIT_MASK(32);
-static struct isi_platform_data isi_data;
-
-struct resource isi_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_ISI,
-		.end	= AT91SAM9G45_BASE_ISI + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_ISI,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_ISI,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_isi_device = {
-	.name		= "atmel_isi",
-	.id		= 0,
-	.dev		= {
-			.dma_mask		= &isi_dmamask,
-			.coherent_dma_mask	= DMA_BIT_MASK(32),
-			.platform_data		= &isi_data,
-	},
-	.resource	= isi_resources,
-	.num_resources	= ARRAY_SIZE(isi_resources),
-};
-
-static struct clk_lookup isi_mck_lookups[] = {
-	CLKDEV_CON_DEV_ID("isi_mck", "atmel_isi.0", NULL),
-};
-
-void __init at91_add_device_isi(struct isi_platform_data *data,
-		bool use_pck_as_mck)
-{
-	struct clk *pck;
-	struct clk *parent;
-
-	if (!data)
-		return;
-	isi_data = *data;
-
-	at91_set_A_periph(AT91_PIN_PB20, 0);	/* ISI_D0 */
-	at91_set_A_periph(AT91_PIN_PB21, 0);	/* ISI_D1 */
-	at91_set_A_periph(AT91_PIN_PB22, 0);	/* ISI_D2 */
-	at91_set_A_periph(AT91_PIN_PB23, 0);	/* ISI_D3 */
-	at91_set_A_periph(AT91_PIN_PB24, 0);	/* ISI_D4 */
-	at91_set_A_periph(AT91_PIN_PB25, 0);	/* ISI_D5 */
-	at91_set_A_periph(AT91_PIN_PB26, 0);	/* ISI_D6 */
-	at91_set_A_periph(AT91_PIN_PB27, 0);	/* ISI_D7 */
-	at91_set_A_periph(AT91_PIN_PB28, 0);	/* ISI_PCK */
-	at91_set_A_periph(AT91_PIN_PB30, 0);	/* ISI_HSYNC */
-	at91_set_A_periph(AT91_PIN_PB29, 0);	/* ISI_VSYNC */
-	at91_set_B_periph(AT91_PIN_PB8, 0);	/* ISI_PD8 */
-	at91_set_B_periph(AT91_PIN_PB9, 0);	/* ISI_PD9 */
-	at91_set_B_periph(AT91_PIN_PB10, 0);	/* ISI_PD10 */
-	at91_set_B_periph(AT91_PIN_PB11, 0);	/* ISI_PD11 */
-
-	platform_device_register(&at91sam9g45_isi_device);
-
-	if (use_pck_as_mck) {
-		at91_set_B_periph(AT91_PIN_PB31, 0);	/* ISI_MCK (PCK1) */
-
-		pck = clk_get(NULL, "pck1");
-		parent = clk_get(NULL, "plla");
-
-		BUG_ON(IS_ERR(pck) || IS_ERR(parent));
-
-		if (clk_set_parent(pck, parent)) {
-			pr_err("Failed to set PCK's parent\n");
-		} else {
-			/* Register PCK as ISI_MCK */
-			isi_mck_lookups[0].clk = pck;
-			clkdev_add_table(isi_mck_lookups,
-					ARRAY_SIZE(isi_mck_lookups));
-		}
-
-		clk_put(pck);
-		clk_put(parent);
-	}
-}
-#else
-void __init at91_add_device_isi(struct isi_platform_data *data,
-		bool use_pck_as_mck) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  LCD Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-static u64 lcdc_dmamask = DMA_BIT_MASK(32);
-static struct atmel_lcdfb_pdata lcdc_data;
-
-static struct resource lcdc_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_LCDC_BASE,
-		.end	= AT91SAM9G45_LCDC_BASE + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_LCDC,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_LCDC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91_lcdc_device = {
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &lcdc_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &lcdc_data,
-	},
-	.resource	= lcdc_resources,
-	.num_resources	= ARRAY_SIZE(lcdc_resources),
-};
-
-void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data)
-{
-	if (!data)
-		return;
-
-	if (cpu_is_at91sam9g45es())
-		at91_lcdc_device.name = "at91sam9g45es-lcdfb";
-	else
-		at91_lcdc_device.name = "at91sam9g45-lcdfb";
-
-	at91_set_A_periph(AT91_PIN_PE0, 0);	/* LCDDPWR */
-
-	at91_set_A_periph(AT91_PIN_PE2, 0);	/* LCDCC */
-	at91_set_A_periph(AT91_PIN_PE3, 0);	/* LCDVSYNC */
-	at91_set_A_periph(AT91_PIN_PE4, 0);	/* LCDHSYNC */
-	at91_set_A_periph(AT91_PIN_PE5, 0);	/* LCDDOTCK */
-	at91_set_A_periph(AT91_PIN_PE6, 0);	/* LCDDEN */
-	at91_set_A_periph(AT91_PIN_PE7, 0);	/* LCDD0 */
-	at91_set_A_periph(AT91_PIN_PE8, 0);	/* LCDD1 */
-	at91_set_A_periph(AT91_PIN_PE9, 0);	/* LCDD2 */
-	at91_set_A_periph(AT91_PIN_PE10, 0);	/* LCDD3 */
-	at91_set_A_periph(AT91_PIN_PE11, 0);	/* LCDD4 */
-	at91_set_A_periph(AT91_PIN_PE12, 0);	/* LCDD5 */
-	at91_set_A_periph(AT91_PIN_PE13, 0);	/* LCDD6 */
-	at91_set_A_periph(AT91_PIN_PE14, 0);	/* LCDD7 */
-	at91_set_A_periph(AT91_PIN_PE15, 0);	/* LCDD8 */
-	at91_set_A_periph(AT91_PIN_PE16, 0);	/* LCDD9 */
-	at91_set_A_periph(AT91_PIN_PE17, 0);	/* LCDD10 */
-	at91_set_A_periph(AT91_PIN_PE18, 0);	/* LCDD11 */
-	at91_set_A_periph(AT91_PIN_PE19, 0);	/* LCDD12 */
-	at91_set_A_periph(AT91_PIN_PE20, 0);	/* LCDD13 */
-	at91_set_A_periph(AT91_PIN_PE21, 0);	/* LCDD14 */
-	at91_set_A_periph(AT91_PIN_PE22, 0);	/* LCDD15 */
-	at91_set_A_periph(AT91_PIN_PE23, 0);	/* LCDD16 */
-	at91_set_A_periph(AT91_PIN_PE24, 0);	/* LCDD17 */
-	at91_set_A_periph(AT91_PIN_PE25, 0);	/* LCDD18 */
-	at91_set_A_periph(AT91_PIN_PE26, 0);	/* LCDD19 */
-	at91_set_A_periph(AT91_PIN_PE27, 0);	/* LCDD20 */
-	at91_set_A_periph(AT91_PIN_PE28, 0);	/* LCDD21 */
-	at91_set_A_periph(AT91_PIN_PE29, 0);	/* LCDD22 */
-	at91_set_A_periph(AT91_PIN_PE30, 0);	/* LCDD23 */
-
-	lcdc_data = *data;
-	platform_device_register(&at91_lcdc_device);
-}
-#else
-void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  Timer/Counter block
- * -------------------------------------------------------------------- */
-
-#ifdef CONFIG_ATMEL_TCLIB
-static struct resource tcb0_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_TCB0,
-		.end	= AT91SAM9G45_BASE_TCB0 + SZ_256 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_TCB,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_TCB,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_tcb0_device = {
-	.name		= "atmel_tcb",
-	.id		= 0,
-	.resource	= tcb0_resources,
-	.num_resources	= ARRAY_SIZE(tcb0_resources),
-};
-
-/* TCB1 begins with TC3 */
-static struct resource tcb1_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_TCB1,
-		.end	= AT91SAM9G45_BASE_TCB1 + SZ_256 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_TCB,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_TCB,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_tcb1_device = {
-	.name		= "atmel_tcb",
-	.id		= 1,
-	.resource	= tcb1_resources,
-	.num_resources	= ARRAY_SIZE(tcb1_resources),
-};
-
-static void __init at91_add_device_tc(void)
-{
-	platform_device_register(&at91sam9g45_tcb0_device);
-	platform_device_register(&at91sam9g45_tcb1_device);
-}
-#else
-static void __init at91_add_device_tc(void) { }
-#endif
-
-
-/* --------------------------------------------------------------------
- *  RTC
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
-static struct resource rtc_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_RTC,
-		.end	= AT91SAM9G45_BASE_RTC + SZ_256 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91_ID_SYS,
-		.end	= NR_IRQS_LEGACY + AT91_ID_SYS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_rtc_device = {
-	.name		= "at91_rtc",
-	.id		= -1,
-	.resource	= rtc_resources,
-	.num_resources	= ARRAY_SIZE(rtc_resources),
-};
-
-static void __init at91_add_device_rtc(void)
-{
-	platform_device_register(&at91sam9g45_rtc_device);
-}
-#else
-static void __init at91_add_device_rtc(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  ADC and touchscreen
- * -------------------------------------------------------------------- */
-
-#if IS_ENABLED(CONFIG_AT91_ADC)
-static struct at91_adc_data adc_data;
-
-static struct resource adc_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_TSC,
-		.end	= AT91SAM9G45_BASE_TSC + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC,
-		.flags	= IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device at91_adc_device = {
-	.name		= "at91sam9g45-adc",
-	.id		= -1,
-	.dev		= {
-				.platform_data	= &adc_data,
-	},
-	.resource	= adc_resources,
-	.num_resources	= ARRAY_SIZE(adc_resources),
-};
-
-static struct at91_adc_trigger at91_adc_triggers[] = {
-	[0] = {
-		.name = "external-rising",
-		.value = 1,
-		.is_external = true,
-	},
-	[1] = {
-		.name = "external-falling",
-		.value = 2,
-		.is_external = true,
-	},
-	[2] = {
-		.name = "external-any",
-		.value = 3,
-		.is_external = true,
-	},
-	[3] = {
-		.name = "continuous",
-		.value = 6,
-		.is_external = false,
-	},
-};
-
-void __init at91_add_device_adc(struct at91_adc_data *data)
-{
-	if (!data)
-		return;
-
-	if (test_bit(0, &data->channels_used))
-		at91_set_gpio_input(AT91_PIN_PD20, 0);
-	if (test_bit(1, &data->channels_used))
-		at91_set_gpio_input(AT91_PIN_PD21, 0);
-	if (test_bit(2, &data->channels_used))
-		at91_set_gpio_input(AT91_PIN_PD22, 0);
-	if (test_bit(3, &data->channels_used))
-		at91_set_gpio_input(AT91_PIN_PD23, 0);
-	if (test_bit(4, &data->channels_used))
-		at91_set_gpio_input(AT91_PIN_PD24, 0);
-	if (test_bit(5, &data->channels_used))
-		at91_set_gpio_input(AT91_PIN_PD25, 0);
-	if (test_bit(6, &data->channels_used))
-		at91_set_gpio_input(AT91_PIN_PD26, 0);
-	if (test_bit(7, &data->channels_used))
-		at91_set_gpio_input(AT91_PIN_PD27, 0);
-
-	if (data->use_external_triggers)
-		at91_set_A_periph(AT91_PIN_PD28, 0);
-
-	data->startup_time = 40;
-	data->trigger_number = 4;
-	data->trigger_list = at91_adc_triggers;
-
-	adc_data = *data;
-	platform_device_register(&at91_adc_device);
-}
-#else
-void __init at91_add_device_adc(struct at91_adc_data *data) {}
-#endif
-
-/* --------------------------------------------------------------------
- *  RTT
- * -------------------------------------------------------------------- */
-
-static struct resource rtt_resources[] = {
-	{
-		.start	= AT91SAM9G45_BASE_RTT,
-		.end	= AT91SAM9G45_BASE_RTT + SZ_16 - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.flags  = IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device at91sam9g45_rtt_device = {
-	.name		= "at91_rtt",
-	.id		= 0,
-	.resource	= rtt_resources,
-};
-
-#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9)
-static void __init at91_add_device_rtt_rtc(void)
-{
-	at91sam9g45_rtt_device.name = "rtc-at91sam9";
-	/*
-	 * The second resource is needed:
-	 * GPBR will serve as the storage for RTC time offset
-	 */
-	at91sam9g45_rtt_device.num_resources = 3;
-	rtt_resources[1].start = AT91SAM9G45_BASE_GPBR +
-				 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
-	rtt_resources[1].end = rtt_resources[1].start + 3;
-	rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
-	rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
-}
-#else
-static void __init at91_add_device_rtt_rtc(void)
-{
-	/* Only one resource is needed: RTT not used as RTC */
-	at91sam9g45_rtt_device.num_resources = 1;
-}
-#endif
-
-static void __init at91_add_device_rtt(void)
-{
-	at91_add_device_rtt_rtc();
-	platform_device_register(&at91sam9g45_rtt_device);
-}
-
-
-/* --------------------------------------------------------------------
- *  TRNG
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_HW_RANDOM_ATMEL) || defined(CONFIG_HW_RANDOM_ATMEL_MODULE)
-static struct resource trng_resources[] = {
-	{
-		.start	= AT91SAM9G45_BASE_TRNG,
-		.end	= AT91SAM9G45_BASE_TRNG + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device at91sam9g45_trng_device = {
-	.name		= "atmel-trng",
-	.id		= -1,
-	.resource	= trng_resources,
-	.num_resources	= ARRAY_SIZE(trng_resources),
-};
-
-static void __init at91_add_device_trng(void)
-{
-	platform_device_register(&at91sam9g45_trng_device);
-}
-#else
-static void __init at91_add_device_trng(void) {}
-#endif
-
-/* --------------------------------------------------------------------
- *  Watchdog
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
-static struct resource wdt_resources[] = {
-	{
-		.start	= AT91SAM9G45_BASE_WDT,
-		.end	= AT91SAM9G45_BASE_WDT + SZ_16 - 1,
-		.flags	= IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device at91sam9g45_wdt_device = {
-	.name		= "at91_wdt",
-	.id		= -1,
-	.resource	= wdt_resources,
-	.num_resources	= ARRAY_SIZE(wdt_resources),
-};
-
-static void __init at91_add_device_watchdog(void)
-{
-	platform_device_register(&at91sam9g45_wdt_device);
-}
-#else
-static void __init at91_add_device_watchdog(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  PWM
- * --------------------------------------------------------------------*/
-
-#if IS_ENABLED(CONFIG_PWM_ATMEL)
-static struct resource pwm_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_PWMC,
-		.end	= AT91SAM9G45_BASE_PWMC + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_PWMC,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_PWMC,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_pwm0_device = {
-	.name	= "at91sam9rl-pwm",
-	.id	= -1,
-	.resource	= pwm_resources,
-	.num_resources	= ARRAY_SIZE(pwm_resources),
-};
-
-void __init at91_add_device_pwm(u32 mask)
-{
-	if (mask & (1 << AT91_PWM0))
-		at91_set_B_periph(AT91_PIN_PD24, 1);	/* enable PWM0 */
-
-	if (mask & (1 << AT91_PWM1))
-		at91_set_B_periph(AT91_PIN_PD31, 1);	/* enable PWM1 */
-
-	if (mask & (1 << AT91_PWM2))
-		at91_set_B_periph(AT91_PIN_PD26, 1);	/* enable PWM2 */
-
-	if (mask & (1 << AT91_PWM3))
-		at91_set_B_periph(AT91_PIN_PD0, 1);	/* enable PWM3 */
-
-	platform_device_register(&at91sam9g45_pwm0_device);
-}
-#else
-void __init at91_add_device_pwm(u32 mask) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  SSC -- Synchronous Serial Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
-static u64 ssc0_dmamask = DMA_BIT_MASK(32);
-
-static struct resource ssc0_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_SSC0,
-		.end	= AT91SAM9G45_BASE_SSC0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_SSC0,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_SSC0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_ssc0_device = {
-	.name	= "at91sam9g45_ssc",
-	.id	= 0,
-	.dev	= {
-		.dma_mask		= &ssc0_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= ssc0_resources,
-	.num_resources	= ARRAY_SIZE(ssc0_resources),
-};
-
-static inline void configure_ssc0_pins(unsigned pins)
-{
-	if (pins & ATMEL_SSC_TF)
-		at91_set_A_periph(AT91_PIN_PD1, 1);
-	if (pins & ATMEL_SSC_TK)
-		at91_set_A_periph(AT91_PIN_PD0, 1);
-	if (pins & ATMEL_SSC_TD)
-		at91_set_A_periph(AT91_PIN_PD2, 1);
-	if (pins & ATMEL_SSC_RD)
-		at91_set_A_periph(AT91_PIN_PD3, 1);
-	if (pins & ATMEL_SSC_RK)
-		at91_set_A_periph(AT91_PIN_PD4, 1);
-	if (pins & ATMEL_SSC_RF)
-		at91_set_A_periph(AT91_PIN_PD5, 1);
-}
-
-static u64 ssc1_dmamask = DMA_BIT_MASK(32);
-
-static struct resource ssc1_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_SSC1,
-		.end	= AT91SAM9G45_BASE_SSC1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_SSC1,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_SSC1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_ssc1_device = {
-	.name	= "at91sam9g45_ssc",
-	.id	= 1,
-	.dev	= {
-		.dma_mask		= &ssc1_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-	},
-	.resource	= ssc1_resources,
-	.num_resources	= ARRAY_SIZE(ssc1_resources),
-};
-
-static inline void configure_ssc1_pins(unsigned pins)
-{
-	if (pins & ATMEL_SSC_TF)
-		at91_set_A_periph(AT91_PIN_PD14, 1);
-	if (pins & ATMEL_SSC_TK)
-		at91_set_A_periph(AT91_PIN_PD12, 1);
-	if (pins & ATMEL_SSC_TD)
-		at91_set_A_periph(AT91_PIN_PD10, 1);
-	if (pins & ATMEL_SSC_RD)
-		at91_set_A_periph(AT91_PIN_PD11, 1);
-	if (pins & ATMEL_SSC_RK)
-		at91_set_A_periph(AT91_PIN_PD13, 1);
-	if (pins & ATMEL_SSC_RF)
-		at91_set_A_periph(AT91_PIN_PD15, 1);
-}
-
-/*
- * SSC controllers are accessed through library code, instead of any
- * kind of all-singing/all-dancing driver.  For example one could be
- * used by a particular I2S audio codec's driver, while another one
- * on the same system might be used by a custom data capture driver.
- */
-void __init at91_add_device_ssc(unsigned id, unsigned pins)
-{
-	struct platform_device *pdev;
-
-	/*
-	 * NOTE: caller is responsible for passing information matching
-	 * "pins" to whatever will be using each particular controller.
-	 */
-	switch (id) {
-	case AT91SAM9G45_ID_SSC0:
-		pdev = &at91sam9g45_ssc0_device;
-		configure_ssc0_pins(pins);
-		break;
-	case AT91SAM9G45_ID_SSC1:
-		pdev = &at91sam9g45_ssc1_device;
-		configure_ssc1_pins(pins);
-		break;
-	default:
-		return;
-	}
-
-	platform_device_register(pdev);
-}
-
-#else
-void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- *  UART
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SERIAL_ATMEL)
-static struct resource dbgu_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_DBGU,
-		.end	= AT91SAM9G45_BASE_DBGU + SZ_512 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91_ID_SYS,
-		.end	= NR_IRQS_LEGACY + AT91_ID_SYS,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data dbgu_data = {
-	.use_dma_tx	= 0,
-	.use_dma_rx	= 0,
-};
-
-static u64 dbgu_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9g45_dbgu_device = {
-	.name		= "atmel_usart",
-	.id		= 0,
-	.dev		= {
-				.dma_mask		= &dbgu_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &dbgu_data,
-	},
-	.resource	= dbgu_resources,
-	.num_resources	= ARRAY_SIZE(dbgu_resources),
-};
-
-static inline void configure_dbgu_pins(void)
-{
-	at91_set_A_periph(AT91_PIN_PB12, 0);		/* DRXD */
-	at91_set_A_periph(AT91_PIN_PB13, 1);		/* DTXD */
-}
-
-static struct resource uart0_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_US0,
-		.end	= AT91SAM9G45_BASE_US0 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_US0,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_US0,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart0_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static u64 uart0_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9g45_uart0_device = {
-	.name		= "atmel_usart",
-	.id		= 1,
-	.dev		= {
-				.dma_mask		= &uart0_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &uart0_data,
-	},
-	.resource	= uart0_resources,
-	.num_resources	= ARRAY_SIZE(uart0_resources),
-};
-
-static inline void configure_usart0_pins(unsigned pins)
-{
-	at91_set_A_periph(AT91_PIN_PB19, 1);		/* TXD0 */
-	at91_set_A_periph(AT91_PIN_PB18, 0);		/* RXD0 */
-
-	if (pins & ATMEL_UART_RTS)
-		at91_set_B_periph(AT91_PIN_PB17, 0);	/* RTS0 */
-	if (pins & ATMEL_UART_CTS)
-		at91_set_B_periph(AT91_PIN_PB15, 0);	/* CTS0 */
-}
-
-static struct resource uart1_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_US1,
-		.end	= AT91SAM9G45_BASE_US1 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_US1,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_US1,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart1_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static u64 uart1_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9g45_uart1_device = {
-	.name		= "atmel_usart",
-	.id		= 2,
-	.dev		= {
-				.dma_mask		= &uart1_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &uart1_data,
-	},
-	.resource	= uart1_resources,
-	.num_resources	= ARRAY_SIZE(uart1_resources),
-};
-
-static inline void configure_usart1_pins(unsigned pins)
-{
-	at91_set_A_periph(AT91_PIN_PB4, 1);		/* TXD1 */
-	at91_set_A_periph(AT91_PIN_PB5, 0);		/* RXD1 */
-
-	if (pins & ATMEL_UART_RTS)
-		at91_set_A_periph(AT91_PIN_PD16, 0);	/* RTS1 */
-	if (pins & ATMEL_UART_CTS)
-		at91_set_A_periph(AT91_PIN_PD17, 0);	/* CTS1 */
-}
-
-static struct resource uart2_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_US2,
-		.end	= AT91SAM9G45_BASE_US2 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_US2,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_US2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart2_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static u64 uart2_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9g45_uart2_device = {
-	.name		= "atmel_usart",
-	.id		= 3,
-	.dev		= {
-				.dma_mask		= &uart2_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &uart2_data,
-	},
-	.resource	= uart2_resources,
-	.num_resources	= ARRAY_SIZE(uart2_resources),
-};
-
-static inline void configure_usart2_pins(unsigned pins)
-{
-	at91_set_A_periph(AT91_PIN_PB6, 1);		/* TXD2 */
-	at91_set_A_periph(AT91_PIN_PB7, 0);		/* RXD2 */
-
-	if (pins & ATMEL_UART_RTS)
-		at91_set_B_periph(AT91_PIN_PC9, 0);	/* RTS2 */
-	if (pins & ATMEL_UART_CTS)
-		at91_set_B_periph(AT91_PIN_PC11, 0);	/* CTS2 */
-}
-
-static struct resource uart3_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_US3,
-		.end	= AT91SAM9G45_BASE_US3 + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_US3,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_US3,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct atmel_uart_data uart3_data = {
-	.use_dma_tx	= 1,
-	.use_dma_rx	= 1,
-};
-
-static u64 uart3_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9g45_uart3_device = {
-	.name		= "atmel_usart",
-	.id		= 4,
-	.dev		= {
-				.dma_mask		= &uart3_dmamask,
-				.coherent_dma_mask	= DMA_BIT_MASK(32),
-				.platform_data		= &uart3_data,
-	},
-	.resource	= uart3_resources,
-	.num_resources	= ARRAY_SIZE(uart3_resources),
-};
-
-static inline void configure_usart3_pins(unsigned pins)
-{
-	at91_set_A_periph(AT91_PIN_PB8, 1);		/* TXD3 */
-	at91_set_A_periph(AT91_PIN_PB9, 0);		/* RXD3 */
-
-	if (pins & ATMEL_UART_RTS)
-		at91_set_B_periph(AT91_PIN_PA23, 0);	/* RTS3 */
-	if (pins & ATMEL_UART_CTS)
-		at91_set_B_periph(AT91_PIN_PA24, 0);	/* CTS3 */
-}
-
-static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART];	/* the UARTs to use */
-
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
-{
-	struct platform_device *pdev;
-	struct atmel_uart_data *pdata;
-
-	switch (id) {
-		case 0:		/* DBGU */
-			pdev = &at91sam9g45_dbgu_device;
-			configure_dbgu_pins();
-			break;
-		case AT91SAM9G45_ID_US0:
-			pdev = &at91sam9g45_uart0_device;
-			configure_usart0_pins(pins);
-			break;
-		case AT91SAM9G45_ID_US1:
-			pdev = &at91sam9g45_uart1_device;
-			configure_usart1_pins(pins);
-			break;
-		case AT91SAM9G45_ID_US2:
-			pdev = &at91sam9g45_uart2_device;
-			configure_usart2_pins(pins);
-			break;
-		case AT91SAM9G45_ID_US3:
-			pdev = &at91sam9g45_uart3_device;
-			configure_usart3_pins(pins);
-			break;
-		default:
-			return;
-	}
-	pdata = pdev->dev.platform_data;
-	pdata->num = portnr;		/* update to mapped ID */
-
-	if (portnr < ATMEL_MAX_UART)
-		at91_uarts[portnr] = pdev;
-}
-
-void __init at91_add_device_serial(void)
-{
-	int i;
-
-	for (i = 0; i < ATMEL_MAX_UART; i++) {
-		if (at91_uarts[i])
-			platform_device_register(at91_uarts[i]);
-	}
-}
-#else
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_add_device_serial(void) {}
-#endif
-
-/* --------------------------------------------------------------------
- *  SHA1/SHA256
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_CRYPTO_DEV_ATMEL_SHA) || defined(CONFIG_CRYPTO_DEV_ATMEL_SHA_MODULE)
-static struct resource sha_resources[] = {
-	{
-		.start	= AT91SAM9G45_BASE_SHA,
-		.end	= AT91SAM9G45_BASE_SHA + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_sha_device = {
-	.name	= "atmel_sha",
-	.id		= -1,
-	.resource	= sha_resources,
-	.num_resources	= ARRAY_SIZE(sha_resources),
-};
-
-static void __init at91_add_device_sha(void)
-{
-	platform_device_register(&at91sam9g45_sha_device);
-}
-#else
-static void __init at91_add_device_sha(void) {}
-#endif
-
-/* --------------------------------------------------------------------
- *  DES/TDES
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_CRYPTO_DEV_ATMEL_TDES) || defined(CONFIG_CRYPTO_DEV_ATMEL_TDES_MODULE)
-static struct resource tdes_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_TDES,
-		.end	= AT91SAM9G45_BASE_TDES + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_tdes_device = {
-	.name	= "atmel_tdes",
-	.id		= -1,
-	.resource	= tdes_resources,
-	.num_resources	= ARRAY_SIZE(tdes_resources),
-};
-
-static void __init at91_add_device_tdes(void)
-{
-	platform_device_register(&at91sam9g45_tdes_device);
-}
-#else
-static void __init at91_add_device_tdes(void) {}
-#endif
-
-/* --------------------------------------------------------------------
- *  AES
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_CRYPTO_DEV_ATMEL_AES) || defined(CONFIG_CRYPTO_DEV_ATMEL_AES_MODULE)
-static struct crypto_platform_data aes_data;
-static struct crypto_dma_data alt_atslave;
-static u64 aes_dmamask = DMA_BIT_MASK(32);
-
-static struct resource aes_resources[] = {
-	[0] = {
-		.start	= AT91SAM9G45_BASE_AES,
-		.end	= AT91SAM9G45_BASE_AES + SZ_16K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
-		.end	= NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device at91sam9g45_aes_device = {
-	.name	= "atmel_aes",
-	.id		= -1,
-	.dev	= {
-		.dma_mask		= &aes_dmamask,
-		.coherent_dma_mask	= DMA_BIT_MASK(32),
-		.platform_data		= &aes_data,
-	},
-	.resource	= aes_resources,
-	.num_resources	= ARRAY_SIZE(aes_resources),
-};
-
-static void __init at91_add_device_aes(void)
-{
-	struct at_dma_slave	*atslave;
-
-	/* DMA TX slave channel configuration */
-	atslave = &alt_atslave.txdata;
-	atslave->dma_dev = &at_hdmac_device.dev;
-	atslave->cfg = ATC_FIFOCFG_ENOUGHSPACE	| ATC_SRC_H2SEL_HW |
-						ATC_SRC_PER(AT_DMA_ID_AES_RX);
-
-	/* DMA RX slave channel configuration */
-	atslave = &alt_atslave.rxdata;
-	atslave->dma_dev = &at_hdmac_device.dev;
-	atslave->cfg = ATC_FIFOCFG_ENOUGHSPACE	| ATC_DST_H2SEL_HW |
-						ATC_DST_PER(AT_DMA_ID_AES_TX);
-
-	aes_data.dma_slave = &alt_atslave;
-	platform_device_register(&at91sam9g45_aes_device);
-}
-#else
-static void __init at91_add_device_aes(void) {}
-#endif
-
-/* -------------------------------------------------------------------- */
-/*
- * These devices are always present and don't need any board-specific
- * setup.
- */
-static int __init at91_add_standard_devices(void)
-{
-	if (of_have_populated_dt())
-		return 0;
-
-	at91_add_device_hdmac();
-	at91_add_device_rtc();
-	at91_add_device_rtt();
-	at91_add_device_trng();
-	at91_add_device_watchdog();
-	at91_add_device_tc();
-	at91_add_device_sha();
-	at91_add_device_tdes();
-	at91_add_device_aes();
-	return 0;
-}
-
-arch_initcall(at91_add_standard_devices);