summaryrefslogtreecommitdiffstats
path: root/arch/arm/lib
diff options
context:
space:
mode:
authorLennert Buytenhek <buytenh@marvell.com>2009-03-09 14:30:09 -0400
committerNicolas Pitre <nico@cam.org>2009-05-29 22:36:45 -0400
commit39ec58f3fea47c242724109cc1da999f74810bbc (patch)
tree26336395f9981e34c0ffa9cf6c61d3feb2d73894 /arch/arm/lib
parenta1f98849fdf2f2fef3ef1c260178cd5fc662b773 (diff)
downloadlinux-39ec58f3fea47c242724109cc1da999f74810bbc.tar.bz2
[ARM] alternative copy_to_user/clear_user implementation
This implements {copy_to,clear}_user() by faulting in the userland pages and then using the regular kernel mem{cpy,set}() to copy the data (while holding the page table lock). This is a win if the regular mem{cpy,set}() implementations are faster than the user copy functions, which is the case e.g. on Feroceon, where 8-word STMs (which memcpy() uses under the right conditions) give significantly higher memory write throughput than a sequence of individual 32bit stores. Here are numbers for page sized buffers on some Feroceon cores: - copy_to_user on Orion5x goes from 51 MB/s to 83 MB/s - clear_user on Orion5x goes from 89MB/s to 314MB/s - copy_to_user on Kirkwood goes from 240 MB/s to 356 MB/s - clear_user on Kirkwood goes from 367 MB/s to 1108 MB/s - copy_to_user on Disco-Duo goes from 248 MB/s to 398 MB/s - clear_user on Disco-Duo goes from 328 MB/s to 1741 MB/s Because the setup cost is non negligible, this is worthwhile only if the amount of data to copy is large enough. The operation falls back to the standard implementation when the amount of data is below a certain threshold. This threshold was determined empirically, however some targets could benefit from a lower runtime determined value for optimal results eventually. In the copy_from_user() case, this technique does not provide any worthwhile performance gain due to the fact that any kind of read access allocates the cache and subsequent 32bit loads are just as fast as the equivalent 8-word LDM. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com> Tested-by: Martin Michlmayr <tbm@cyrius.com>
Diffstat (limited to 'arch/arm/lib')
-rw-r--r--arch/arm/lib/Makefile3
-rw-r--r--arch/arm/lib/uaccess_with_memcpy.c139
2 files changed, 142 insertions, 0 deletions
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 866f84a586ff..030ba7219f48 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -29,6 +29,9 @@ else
endif
endif
+# using lib_ here won't override already available weak symbols
+obj-$(CONFIG_UACCESS_WITH_MEMCPY) += uaccess_with_memcpy.o
+
lib-$(CONFIG_MMU) += $(mmu-y)
ifeq ($(CONFIG_CPU_32v3),y)
diff --git a/arch/arm/lib/uaccess_with_memcpy.c b/arch/arm/lib/uaccess_with_memcpy.c
new file mode 100644
index 000000000000..bf987b4a2571
--- /dev/null
+++ b/arch/arm/lib/uaccess_with_memcpy.c
@@ -0,0 +1,139 @@
+/*
+ * linux/arch/arm/lib/uaccess_with_memcpy.c
+ *
+ * Written by: Lennert Buytenhek and Nicolas Pitre
+ * Copyright (C) 2009 Marvell Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/ctype.h>
+#include <linux/uaccess.h>
+#include <linux/rwsem.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/hardirq.h> /* for in_atomic() */
+#include <asm/current.h>
+#include <asm/page.h>
+
+static int
+pin_page_for_write(const void __user *_addr, pte_t **ptep, spinlock_t **ptlp)
+{
+ unsigned long addr = (unsigned long)_addr;
+ pgd_t *pgd;
+ pmd_t *pmd;
+ pte_t *pte;
+ spinlock_t *ptl;
+
+ pgd = pgd_offset(current->mm, addr);
+ if (unlikely(pgd_none(*pgd) || pgd_bad(*pgd)))
+ return 0;
+
+ pmd = pmd_offset(pgd, addr);
+ if (unlikely(pmd_none(*pmd) || pmd_bad(*pmd)))
+ return 0;
+
+ pte = pte_offset_map_lock(current->mm, pmd, addr, &ptl);
+ if (unlikely(!pte_present(*pte) || !pte_young(*pte) ||
+ !pte_write(*pte) || !pte_dirty(*pte))) {
+ pte_unmap_unlock(pte, ptl);
+ return 0;
+ }
+
+ *ptep = pte;
+ *ptlp = ptl;
+
+ return 1;
+}
+
+unsigned long
+__copy_to_user(void __user *to, const void *from, unsigned long n)
+{
+ int atomic;
+
+ if (n < 1024)
+ return __copy_to_user_std(to, from, n);
+
+ if (unlikely(segment_eq(get_fs(), KERNEL_DS))) {
+ memcpy((void *)to, from, n);
+ return 0;
+ }
+
+ /* the mmap semaphore is taken only if not in an atomic context */
+ atomic = in_atomic();
+
+ if (!atomic)
+ down_read(&current->mm->mmap_sem);
+ while (n) {
+ pte_t *pte;
+ spinlock_t *ptl;
+ int tocopy;
+
+ while (!pin_page_for_write(to, &pte, &ptl)) {
+ if (!atomic)
+ up_read(&current->mm->mmap_sem);
+ if (__put_user(0, (char __user *)to))
+ goto out;
+ if (!atomic)
+ down_read(&current->mm->mmap_sem);
+ }
+
+ tocopy = (~(unsigned long)to & ~PAGE_MASK) + 1;
+ if (tocopy > n)
+ tocopy = n;
+
+ memcpy((void *)to, from, tocopy);
+ to += tocopy;
+ from += tocopy;
+ n -= tocopy;
+
+ pte_unmap_unlock(pte, ptl);
+ }
+ if (!atomic)
+ up_read(&current->mm->mmap_sem);
+
+out:
+ return n;
+}
+
+unsigned long __clear_user(void __user *addr, unsigned long n)
+{
+ if (n < 256)
+ return __clear_user_std(addr, n);
+
+ if (unlikely(segment_eq(get_fs(), KERNEL_DS))) {
+ memset((void *)addr, 0, n);
+ return 0;
+ }
+
+ down_read(&current->mm->mmap_sem);
+ while (n) {
+ pte_t *pte;
+ spinlock_t *ptl;
+ int tocopy;
+
+ while (!pin_page_for_write(addr, &pte, &ptl)) {
+ up_read(&current->mm->mmap_sem);
+ if (__put_user(0, (char __user *)addr))
+ goto out;
+ down_read(&current->mm->mmap_sem);
+ }
+
+ tocopy = (~(unsigned long)addr & ~PAGE_MASK) + 1;
+ if (tocopy > n)
+ tocopy = n;
+
+ memset((void *)addr, 0, tocopy);
+ addr += tocopy;
+ n -= tocopy;
+
+ pte_unmap_unlock(pte, ptl);
+ }
+ up_read(&current->mm->mmap_sem);
+
+out:
+ return n;
+}