Merge branch 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM updates from Russell King:

 - add support for ELF fdpic binaries on both MMU and noMMU platforms

 - linker script cleanups

 - support for compressed .data section for XIP images

 - discard memblock arrays when possible

 - various cleanups

 - atomic DMA pool updates

 - better diagnostics of missing/corrupt device tree

 - export information to allow userspace kexec tool to place images more
   inteligently, so that the device tree isn't overwritten by the
   booting kernel

 - make early_printk more efficient on semihosted systems

 - noMMU cleanups

 - SA1111 PCMCIA update in preparation for further cleanups

* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: (38 commits)
  ARM: 8719/1: NOMMU: work around maybe-uninitialized warning
  ARM: 8717/2: debug printch/printascii: translate '\n' to "\r\n" not "\n\r"
  ARM: 8713/1: NOMMU: Support MPU in XIP configuration
  ARM: 8712/1: NOMMU: Use more MPU regions to cover memory
  ARM: 8711/1: V7M: Add support for MPU to M-class
  ARM: 8710/1: Kconfig: Kill CONFIG_VECTORS_BASE
  ARM: 8709/1: NOMMU: Disallow MPU for XIP
  ARM: 8708/1: NOMMU: Rework MPU to be mostly done in C
  ARM: 8707/1: NOMMU: Update MPU accessors to use cp15 helpers
  ARM: 8706/1: NOMMU: Move out MPU setup in separate module
  ARM: 8702/1: head-common.S: Clear lr before jumping to start_kernel()
  ARM: 8705/1: early_printk: use printascii() rather than printch()
  ARM: 8703/1: debug.S: move hexbuf to a writable section
  ARM: add additional table to compressed kernel
  ARM: decompressor: fix BSS size calculation
  pcmcia: sa1111: remove special sa1111 mmio accessors
  pcmcia: sa1111: use sa1111_get_irq() to obtain IRQ resources
  ARM: better diagnostics with missing/corrupt dtb
  ARM: 8699/1: dma-mapping: Remove init_dma_coherent_pool_size()
  ARM: 8698/1: dma-mapping: Mark atomic_pool as __ro_after_init
  ..

1 files changed, 65 insertions, 50 deletions

diff --git a/arch/arm/kernel/vmlinux-xip.lds.S b/arch/arm/kernel/vmlinux-xip.lds.S
index 0951df916b85..ec4b3f94ad80 100644
--- a/arch/arm/kernel/vmlinux-xip.lds.S
+++ b/arch/arm/kernel/vmlinux-xip.lds.S
@@ -7,6 +7,8 @@
 /* No __ro_after_init data in the .rodata section - which will always be ro */
 #define RO_AFTER_INIT_DATA
 
+#include <linux/sizes.h>
+
 #include <asm-generic/vmlinux.lds.h>
 #include <asm/cache.h>
 #include <asm/thread_info.h>
@@ -78,9 +80,7 @@ SECTIONS
 		*(.text.fixup)
 		*(__ex_table)
 #endif
-#ifndef CONFIG_SMP_ON_UP
 		*(.alt.smp.init)
-#endif
 		*(.discard)
 		*(.discard.*)
 	}
@@ -182,19 +182,7 @@ SECTIONS
 		*(.taglist.init)
 		__tagtable_end = .;
 	}
-#ifdef CONFIG_SMP_ON_UP
-	.init.smpalt : {
-		__smpalt_begin = .;
-		*(.alt.smp.init)
-		__smpalt_end = .;
-	}
-#endif
-	.init.pv_table : {
-		__pv_table_begin = .;
-		*(.pv_table)
-		__pv_table_end = .;
-	}
-	.init.data : {
+	.init.rodata : {
 		INIT_SETUP(16)
 		INIT_CALLS
 		CON_INITCALL
@@ -202,48 +190,49 @@ SECTIONS
 		INIT_RAM_FS
 	}
 
-#ifdef CONFIG_SMP
-	PERCPU_SECTION(L1_CACHE_BYTES)
+#ifdef CONFIG_ARM_MPU
+	. = ALIGN(SZ_128K);
 #endif
-
 	_exiprom = .;			/* End of XIP ROM area */
-	__data_loc = ALIGN(4);		/* location in binary */
-	. = PAGE_OFFSET + TEXT_OFFSET;
 
-	.data : AT(__data_loc) {
-		_data = .;		/* address in memory */
-		_sdata = .;
-
-		/*
-		 * first, the init task union, aligned
-		 * to an 8192 byte boundary.
-		 */
-		INIT_TASK_DATA(THREAD_SIZE)
+/*
+ * From this point, stuff is considered writable and will be copied to RAM
+ */
+	__data_loc = ALIGN(4);		/* location in file */
+	. = PAGE_OFFSET + TEXT_OFFSET;	/* location in memory */
+#undef LOAD_OFFSET
+#define LOAD_OFFSET (PAGE_OFFSET + TEXT_OFFSET - __data_loc)
+
+	. = ALIGN(THREAD_SIZE);
+	_sdata = .;
+	RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
+	.data.ro_after_init : AT(ADDR(.data.ro_after_init) - LOAD_OFFSET) {
+		*(.data..ro_after_init)
+	}
+	_edata = .;
 
-		. = ALIGN(PAGE_SIZE);
-		__init_begin = .;
+	. = ALIGN(PAGE_SIZE);
+	__init_begin = .;
+	.init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
 		INIT_DATA
+	}
+	.exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) {
 		ARM_EXIT_KEEP(EXIT_DATA)
-		. = ALIGN(PAGE_SIZE);
-		__init_end = .;
-
-		*(.data..ro_after_init)
-
-		NOSAVE_DATA
-		CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES)
-		READ_MOSTLY_DATA(L1_CACHE_BYTES)
-
-		/*
-		 * and the usual data section
-		 */
-		DATA_DATA
-		CONSTRUCTORS
-
-		_edata = .;
 	}
-	_edata_loc = __data_loc + SIZEOF(.data);
+#ifdef CONFIG_SMP
+	PERCPU_SECTION(L1_CACHE_BYTES)
+#endif
+
+	/*
+	 * End of copied data. We need a dummy section to get its LMA.
+	 * Also located before final ALIGN() as trailing padding is not stored
+	 * in the resulting binary file and useless to copy.
+	 */
+	.data.endmark : AT(ADDR(.data.endmark) - LOAD_OFFSET) { }
+	_edata_loc = LOADADDR(.data.endmark);
 
-	BUG_TABLE
+	. = ALIGN(PAGE_SIZE);
+	__init_end = .;
 
 #ifdef CONFIG_HAVE_TCM
         /*
@@ -302,7 +291,7 @@ SECTIONS
 	}
 #endif
 
-	BSS_SECTION(0, 0, 0)
+	BSS_SECTION(0, 0, 8)
 	_end = .;
 
 	STABS_DEBUG
@@ -323,3 +312,29 @@ ASSERT((__arch_info_end - __arch_info_begin), "no machine record defined")
  */
 ASSERT(__hyp_idmap_text_end - (__hyp_idmap_text_start & PAGE_MASK) <= PAGE_SIZE,
 	"HYP init code too big or misaligned")
+
+#ifdef CONFIG_XIP_DEFLATED_DATA
+/*
+ * The .bss is used as a stack area for __inflate_kernel_data() whose stack
+ * frame is 9568 bytes. Make sure it has extra room left.
+ */
+ASSERT((_end - __bss_start) >= 12288, ".bss too small for CONFIG_XIP_DEFLATED_DATA")
+#endif
+
+#ifdef CONFIG_ARM_MPU
+/*
+ * Due to PMSAv7 restriction on base address and size we have to
+ * enforce minimal alignment restrictions. It was seen that weaker
+ * alignment restriction on _xiprom will likely force XIP address
+ * space spawns multiple MPU regions thus it is likely we run in
+ * situation when we are reprogramming MPU region we run on with
+ * something which doesn't cover reprogramming code itself, so as soon
+ * as we update MPU settings we'd immediately try to execute straight
+ * from background region which is XN.
+ * It seem that alignment in 1M should suit most users.
+ * _exiprom is aligned as 1/8 of 1M so can be covered by subregion
+ * disable
+ */
+ASSERT(!(_xiprom & (SZ_1M - 1)), "XIP start address may cause MPU programming issues")
+ASSERT(!(_exiprom & (SZ_128K - 1)), "XIP end address may cause MPU programming issues")
+#endif