ARM: entry: provide uaccess assembly macro hooks

Provide hooks into the kernel entry and exit paths to permit control
of userspace visibility to the kernel.  The intended use is:

- on entry to kernel from user, uaccess_disable will be called to
  disable userspace visibility
- on exit from kernel to user, uaccess_enable will be called to
  enable userspace visibility
- on entry from a kernel exception, uaccess_save_and_disable will be
  called to save the current userspace visibility setting, and disable
  access
- on exit from a kernel exception, uaccess_restore will be called to
  restore the userspace visibility as it was before the exception
  occurred.

These hooks allows us to keep userspace visibility disabled for the
vast majority of the kernel, except for localised regions where we
want to explicitly access userspace.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 22 insertions, 8 deletions

diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index d19adcf6c580..61f00a3f3047 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -149,10 +149,10 @@ ENDPROC(__und_invalid)
 #define SPFIX(code...)
 #endif
 
-	.macro	svc_entry, stack_hole=0, trace=1
+	.macro	svc_entry, stack_hole=0, trace=1, uaccess=1
  UNWIND(.fnstart		)
  UNWIND(.save {r0 - pc}		)
-	sub	sp, sp, #(S_FRAME_SIZE + \stack_hole - 4)
+	sub	sp, sp, #(S_FRAME_SIZE + 8 + \stack_hole - 4)
 #ifdef CONFIG_THUMB2_KERNEL
  SPFIX(	str	r0, [sp]	)	@ temporarily saved
  SPFIX(	mov	r0, sp		)
@@ -167,7 +167,7 @@ ENDPROC(__und_invalid)
 	ldmia	r0, {r3 - r5}
 	add	r7, sp, #S_SP - 4	@ here for interlock avoidance
 	mov	r6, #-1			@  ""  ""      ""       ""
-	add	r2, sp, #(S_FRAME_SIZE + \stack_hole - 4)
+	add	r2, sp, #(S_FRAME_SIZE + 8 + \stack_hole - 4)
  SPFIX(	addeq	r2, r2, #4	)
 	str	r3, [sp, #-4]!		@ save the "real" r0 copied
 					@ from the exception stack
@@ -185,6 +185,11 @@ ENDPROC(__und_invalid)
 	@
 	stmia	r7, {r2 - r6}
 
+	uaccess_save r0
+	.if \uaccess
+	uaccess_disable r0
+	.endif
+
 	.if \trace
 #ifdef CONFIG_TRACE_IRQFLAGS
 	bl	trace_hardirqs_off
@@ -194,7 +199,7 @@ ENDPROC(__und_invalid)
 
 	.align	5
 __dabt_svc:
-	svc_entry
+	svc_entry uaccess=0
 	mov	r2, sp
 	dabt_helper
  THUMB(	ldr	r5, [sp, #S_PSR]	)	@ potentially updated CPSR
@@ -368,7 +373,7 @@ ENDPROC(__fiq_abt)
 #error "sizeof(struct pt_regs) must be a multiple of 8"
 #endif
 
-	.macro	usr_entry, trace=1
+	.macro	usr_entry, trace=1, uaccess=1
  UNWIND(.fnstart	)
  UNWIND(.cantunwind	)	@ don't unwind the user space
 	sub	sp, sp, #S_FRAME_SIZE
@@ -400,6 +405,10 @@ ENDPROC(__fiq_abt)
  ARM(	stmdb	r0, {sp, lr}^			)
  THUMB(	store_user_sp_lr r0, r1, S_SP - S_PC	)
 
+	.if \uaccess
+	uaccess_disable ip
+	.endif
+
 	@ Enable the alignment trap while in kernel mode
  ATRAP(	teq	r8, r7)
  ATRAP( mcrne	p15, 0, r8, c1, c0, 0)
@@ -435,7 +444,7 @@ ENDPROC(__fiq_abt)
 
 	.align	5
 __dabt_usr:
-	usr_entry
+	usr_entry uaccess=0
 	kuser_cmpxchg_check
 	mov	r2, sp
 	dabt_helper
@@ -458,7 +467,7 @@ ENDPROC(__irq_usr)
 
 	.align	5
 __und_usr:
-	usr_entry
+	usr_entry uaccess=0
 
 	mov	r2, r4
 	mov	r3, r5
@@ -484,6 +493,8 @@ __und_usr:
 1:	ldrt	r0, [r4]
  ARM_BE8(rev	r0, r0)				@ little endian instruction
 
+	uaccess_disable ip
+
 	@ r0 = 32-bit ARM instruction which caused the exception
 	@ r2 = PC value for the following instruction (:= regs->ARM_pc)
 	@ r4 = PC value for the faulting instruction
@@ -518,9 +529,10 @@ __und_usr_thumb:
 2:	ldrht	r5, [r4]
 ARM_BE8(rev16	r5, r5)				@ little endian instruction
 	cmp	r5, #0xe800			@ 32bit instruction if xx != 0
-	blo	__und_usr_fault_16		@ 16bit undefined instruction
+	blo	__und_usr_fault_16_pan		@ 16bit undefined instruction
 3:	ldrht	r0, [r2]
 ARM_BE8(rev16	r0, r0)				@ little endian instruction
+	uaccess_disable ip
 	add	r2, r2, #2			@ r2 is PC + 2, make it PC + 4
 	str	r2, [sp, #S_PC]			@ it's a 2x16bit instr, update
 	orr	r0, r0, r5, lsl #16
@@ -715,6 +727,8 @@ ENDPROC(no_fp)
 __und_usr_fault_32:
 	mov	r1, #4
 	b	1f
+__und_usr_fault_16_pan:
+	uaccess_disable ip
 __und_usr_fault_16:
 	mov	r1, #2
 1:	mov	r0, sp