Merge branch 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm

Pull ARM updates from Russell King:

 - UEFI boot and runtime services support for ARM from Ard Biesheuvel
   and Roy Franz.

 - DT compatibility with old atags booting protocol for Nokia N900
   devices from Ivaylo Dimitrov.

 - PSCI firmware interface using new arm-smc calling convention from
   Jens Wiklander.

 - Runtime patching for udiv/sdiv instructions for ARMv7 CPUs that
   support these instructions from Nicolas Pitre.

 - L2x0 cache updates from Dirk B and Linus Walleij.

 - Randconfig fixes from Arnd Bergmann.

 - ARMv7M (nommu) updates from Ezequiel Garcia

* 'for-linus' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: (34 commits)
  ARM: 8481/2: drivers: psci: replace psci firmware calls
  ARM: 8480/2: arm64: add implementation for arm-smccc
  ARM: 8479/2: add implementation for arm-smccc
  ARM: 8478/2: arm/arm64: add arm-smccc
  ARM: 8494/1: mm: Enable PXN when running non-LPAE kernel on LPAE processor
  ARM: 8496/1: OMAP: RX51: save ATAGS data in the early boot stage
  ARM: 8495/1: ATAGS: move save_atags() to arch/arm/include/asm/setup.h
  ARM: 8452/3: PJ4: make coprocessor access sequences buildable in Thumb2 mode
  ARM: 8482/1: l2x0: make it possible to disable outer sync from DT
  ARM: 8488/1: Make IPI_CPU_BACKTRACE a "non-secure" SGI
  ARM: 8487/1: Remove IPI_CALL_FUNC_SINGLE
  ARM: 8485/1: cpuidle: remove cpu parameter from the cpuidle_ops suspend hook
  ARM: 8484/1: Documentation: l2c2x0: Mention separate controllers explicitly
  ARM: 8483/1: Documentation: l2c: Rename l2cc to l2c2x0
  ARM: 8477/1: runtime patch udiv/sdiv instructions into __aeabi_{u}idiv()
  ARM: 8476/1: VDSO: use PTR_ERR_OR_ZERO for vma check
  ARM: 8453/2: proc-v7.S: don't locate temporary stack space in .text section
  ARM: add UEFI stub support
  ARM: wire up UEFI init and runtime support
  ARM: only consider memblocks with NOMAP cleared for linear mapping
  ...

4 files changed, 192 insertions, 3 deletions

diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 3f9a9ebc77c3..4c23a68a0917 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -167,9 +167,11 @@ if [ $(words $(ZRELADDR)) -gt 1 -a "$(CONFIG_AUTO_ZRELADDR)" = "" ]; then \
 	false; \
 fi
 
+efi-obj-$(CONFIG_EFI_STUB) := $(objtree)/drivers/firmware/efi/libstub/lib.a
+
 $(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \
 		$(addprefix $(obj)/, $(OBJS)) $(lib1funcs) $(ashldi3) \
-		$(bswapsdi2) FORCE
+		$(bswapsdi2) $(efi-obj-y) FORCE
 	@$(check_for_multiple_zreladdr)
 	$(call if_changed,ld)
 	@$(check_for_bad_syms)
diff --git a/arch/arm/boot/compressed/efi-header.S b/arch/arm/boot/compressed/efi-header.S
new file mode 100644
index 000000000000..9d5dc4fda3c1
--- /dev/null
+++ b/arch/arm/boot/compressed/efi-header.S
@@ -0,0 +1,130 @@
+/*
+ * Copyright (C) 2013-2015 Linaro Ltd
+ * Authors: Roy Franz <roy.franz@linaro.org>
+ *          Ard Biesheuvel <ard.biesheuvel@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+		.macro	__nop
+#ifdef CONFIG_EFI_STUB
+		@ This is almost but not quite a NOP, since it does clobber the
+		@ condition flags. But it is the best we can do for EFI, since
+		@ PE/COFF expects the magic string "MZ" at offset 0, while the
+		@ ARM/Linux boot protocol expects an executable instruction
+		@ there.
+		.inst	'M' | ('Z' << 8) | (0x1310 << 16)   @ tstne r0, #0x4d000
+#else
+		mov	r0, r0
+#endif
+		.endm
+
+		.macro	__EFI_HEADER
+#ifdef CONFIG_EFI_STUB
+		b	__efi_start
+
+		.set	start_offset, __efi_start - start
+		.org	start + 0x3c
+		@
+		@ The PE header can be anywhere in the file, but for
+		@ simplicity we keep it together with the MSDOS header
+		@ The offset to the PE/COFF header needs to be at offset
+		@ 0x3C in the MSDOS header.
+		@ The only 2 fields of the MSDOS header that are used are this
+		@ PE/COFF offset, and the "MZ" bytes at offset 0x0.
+		@
+		.long	pe_header - start	@ Offset to the PE header.
+
+pe_header:
+		.ascii	"PE\0\0"
+
+coff_header:
+		.short	0x01c2			@ ARM or Thumb
+		.short	2			@ nr_sections
+		.long	0 			@ TimeDateStamp
+		.long	0			@ PointerToSymbolTable
+		.long	1			@ NumberOfSymbols
+		.short	section_table - optional_header
+						@ SizeOfOptionalHeader
+		.short	0x306			@ Characteristics.
+						@ IMAGE_FILE_32BIT_MACHINE |
+						@ IMAGE_FILE_DEBUG_STRIPPED |
+						@ IMAGE_FILE_EXECUTABLE_IMAGE |
+						@ IMAGE_FILE_LINE_NUMS_STRIPPED
+
+optional_header:
+		.short	0x10b			@ PE32 format
+		.byte	0x02			@ MajorLinkerVersion
+		.byte	0x14			@ MinorLinkerVersion
+		.long	_end - __efi_start	@ SizeOfCode
+		.long	0			@ SizeOfInitializedData
+		.long	0			@ SizeOfUninitializedData
+		.long	efi_stub_entry - start	@ AddressOfEntryPoint
+		.long	start_offset		@ BaseOfCode
+		.long	0			@ data
+
+extra_header_fields:
+		.long	0			@ ImageBase
+		.long	0x200			@ SectionAlignment
+		.long	0x200			@ FileAlignment
+		.short	0			@ MajorOperatingSystemVersion
+		.short	0			@ MinorOperatingSystemVersion
+		.short	0			@ MajorImageVersion
+		.short	0			@ MinorImageVersion
+		.short	0			@ MajorSubsystemVersion
+		.short	0			@ MinorSubsystemVersion
+		.long	0			@ Win32VersionValue
+
+		.long	_end - start		@ SizeOfImage
+		.long	start_offset		@ SizeOfHeaders
+		.long	0			@ CheckSum
+		.short	0xa			@ Subsystem (EFI application)
+		.short	0			@ DllCharacteristics
+		.long	0			@ SizeOfStackReserve
+		.long	0			@ SizeOfStackCommit
+		.long	0			@ SizeOfHeapReserve
+		.long	0			@ SizeOfHeapCommit
+		.long	0			@ LoaderFlags
+		.long	0x6			@ NumberOfRvaAndSizes
+
+		.quad	0			@ ExportTable
+		.quad	0			@ ImportTable
+		.quad	0			@ ResourceTable
+		.quad	0			@ ExceptionTable
+		.quad	0			@ CertificationTable
+		.quad	0			@ BaseRelocationTable
+
+section_table:
+		@
+		@ The EFI application loader requires a relocation section
+		@ because EFI applications must be relocatable. This is a
+		@ dummy section as far as we are concerned.
+		@
+		.ascii	".reloc\0\0"
+		.long	0			@ VirtualSize
+		.long	0			@ VirtualAddress
+		.long	0			@ SizeOfRawData
+		.long	0			@ PointerToRawData
+		.long	0			@ PointerToRelocations
+		.long	0			@ PointerToLineNumbers
+		.short	0			@ NumberOfRelocations
+		.short	0			@ NumberOfLineNumbers
+		.long	0x42100040		@ Characteristics
+
+		.ascii	".text\0\0\0"
+		.long	_end - __efi_start	@ VirtualSize
+		.long	__efi_start		@ VirtualAddress
+		.long	_edata - __efi_start	@ SizeOfRawData
+		.long	__efi_start		@ PointerToRawData
+		.long	0			@ PointerToRelocations
+		.long	0			@ PointerToLineNumbers
+		.short	0			@ NumberOfRelocations
+		.short	0			@ NumberOfLineNumbers
+		.long	0xe0500020		@ Characteristics
+
+		.align	9
+__efi_start:
+#endif
+		.endm
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 06e983f59980..af11c2f8f3b7 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -12,6 +12,8 @@
 #include <asm/assembler.h>
 #include <asm/v7m.h>
 
+#include "efi-header.S"
+
  AR_CLASS(	.arch	armv7-a	)
  M_CLASS(	.arch	armv7-m	)
 
@@ -126,7 +128,7 @@
 start:
 		.type	start,#function
 		.rept	7
-		mov	r0, r0
+		__nop
 		.endr
    ARM(		mov	r0, r0		)
    ARM(		b	1f		)
@@ -139,7 +141,8 @@ start:
 		.word	0x04030201	@ endianness flag
 
  THUMB(		.thumb			)
-1:
+1:		__EFI_HEADER
+
  ARM_BE8(	setend	be		)	@ go BE8 if compiled for BE8
  AR_CLASS(	mrs	r9, cpsr	)
 #ifdef CONFIG_ARM_VIRT_EXT
@@ -1353,6 +1356,53 @@ __enter_kernel:
 
 reloc_code_end:
 
+#ifdef CONFIG_EFI_STUB
+		.align	2
+_start:		.long	start - .
+
+ENTRY(efi_stub_entry)
+		@ allocate space on stack for passing current zImage address
+		@ and for the EFI stub to return of new entry point of
+		@ zImage, as EFI stub may copy the kernel. Pointer address
+		@ is passed in r2. r0 and r1 are passed through from the
+		@ EFI firmware to efi_entry
+		adr	ip, _start
+		ldr	r3, [ip]
+		add	r3, r3, ip
+		stmfd	sp!, {r3, lr}
+		mov	r2, sp			@ pass zImage address in r2
+		bl	efi_entry
+
+		@ Check for error return from EFI stub. r0 has FDT address
+		@ or error code.
+		cmn	r0, #1
+		beq	efi_load_fail
+
+		@ Preserve return value of efi_entry() in r4
+		mov	r4, r0
+		bl	cache_clean_flush
+		bl	cache_off
+
+		@ Set parameters for booting zImage according to boot protocol
+		@ put FDT address in r2, it was returned by efi_entry()
+		@ r1 is the machine type, and r0 needs to be 0
+		mov	r0, #0
+		mov	r1, #0xFFFFFFFF
+		mov	r2, r4
+
+		@ Branch to (possibly) relocated zImage that is in [sp]
+		ldr	lr, [sp]
+		ldr	ip, =start_offset
+		add	lr, lr, ip
+		mov	pc, lr				@ no mode switch
+
+efi_load_fail:
+		@ Return EFI_LOAD_ERROR to EFI firmware on error.
+		ldr	r0, =0x80000001
+		ldmfd	sp!, {ip, pc}
+ENDPROC(efi_stub_entry)
+#endif
+
 		.align
 		.section ".stack", "aw", %nobits
 .L_user_stack:	.space	4096
diff --git a/arch/arm/boot/compressed/vmlinux.lds.S b/arch/arm/boot/compressed/vmlinux.lds.S
index 2b60b843ac5e..81c493156ce8 100644
--- a/arch/arm/boot/compressed/vmlinux.lds.S
+++ b/arch/arm/boot/compressed/vmlinux.lds.S
@@ -48,6 +48,13 @@ SECTIONS
     *(.rodata)
     *(.rodata.*)
   }
+  .data : {
+    /*
+     * The EFI stub always executes from RAM, and runs strictly before the
+     * decompressor, so we can make an exception for its r/w data, and keep it
+     */
+    *(.data.efistub)
+  }
   .piggydata : {
     *(.piggydata)
   }