Merge tag 'omap-for-v3.8/cleanup-timer-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup

Timer clean-up to get us closer to moving timer code to drivers,
and to get rid of CONFIG_OMAP_32K_TIMER and rely on the board
or devicetree provided timer configuration.

Note that these changes are on top of the recent timer fixes.

By Jon Hunter (32) and others
via Tony Lindgren
* tag 'omap-for-v3.8/cleanup-timer-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (71 commits)
  ARM: OMAP3: cm-t3517: use GPTIMER for system clock
  ARM: OMAP2+: timer: remove CONFIG_OMAP_32K_TIMER
  ARM: OMAP2+: Fix compiler warning for 32k timer
  ARM: OMAP: Remove unnecessary inclusion of dmtimer.h
  ARM: OMAP: Add platform data header for DMTIMERs
  ARM: OMAP: Remove unnecessary omap_dm_timer structure declaration
  ARM: OMAP2+: Remove unnecessary local variable in timer code
  ARM: OMAP: Don't store timers physical address
  ARM: OMAP: Define omap_dm_timer_prepare function as static
  ARM: OMAP: Clean-up dmtimer reset code
  ARM: OMAP: Remove __omap_dm_timer_set_source function
  ARM: OMAP: Remove unnecessary call to clk_get()
  ARM: OMAP: Add dmtimer interrupt disable function
  ARM: OMAP: Fix spurious interrupts when using timer match feature
  ARM: OMAP: Don't restore DMTIMER interrupt status register
  ARM: OMAP: Don't restore of DMTIMER TISTAT register
  ARM: OMAP: Fix dmtimer reset for timer1
  ARM: OMAP2+: Don't use __omap_dm_timer_reset()
  ARM: OMAP2/3: Define HWMOD software reset status for DMTIMERs
  ARM: OMAP3: Correct HWMOD DMTIMER SYSC register declarations
  ...

Change/change conflict in arch/arm/mach-omap2/board-cm-t3517.c.

Signed-off-by: Olof Johansson <olof@lixom.net>

23 files changed, 1312 insertions, 51 deletions

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index f37cf9fa5fa0..2458b69e2be6 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -63,15 +63,17 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
 	imx28-m28evk.dtb \
 	imx28-tx28.dtb
 dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
+	omap3-beagle.dtb \
 	omap3-beagle-xm.dtb \
 	omap3-evm.dtb \
 	omap3-tobi.dtb \
 	omap4-panda.dtb \
-	omap4-pandaES.dtb \
-	omap4-var_som.dtb \
+	omap4-panda-es.dtb \
+	omap4-var-som.dtb \
 	omap4-sdp.dtb \
 	omap5-evm.dtb \
 	am335x-evm.dtb \
+	am335x-evmsk.dtb \
 	am335x-bone.dtb
 dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
 dtb-$(CONFIG_ARCH_U8500) += snowball.dtb
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index c634f87e230e..2c338889df1b 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -13,11 +13,31 @@
 	model = "TI AM335x BeagleBone";
 	compatible = "ti,am335x-bone", "ti,am33xx";
 
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&dcdc2_reg>;
+		};
+	};
+
 	memory {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
+	am33xx_pinmux: pinmux@44e10800 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_s0>;
+
+		user_leds_s0: user_leds_s0 {
+			pinctrl-single,pins = <
+				0x54 0x7	/* gpmc_a5.gpio1_21, OUTPUT | MODE7 */
+				0x58 0x17	/* gpmc_a6.gpio1_22, OUTPUT_PULLUP | MODE7 */
+				0x5c 0x7	/* gpmc_a7.gpio1_23, OUTPUT | MODE7 */
+				0x60 0x17	/* gpmc_a8.gpio1_24, OUTPUT_PULLUP | MODE7 */
+			>;
+		};
+	};
+
 	ocp {
 		uart1: serial@44e09000 {
 			status = "okay";
@@ -33,6 +53,36 @@
 
 		};
 	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led@2 {
+			label = "beaglebone:green:heartbeat";
+			gpios = <&gpio2 21 0>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led@3 {
+			label = "beaglebone:green:mmc0";
+			gpios = <&gpio2 22 0>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led@4 {
+			label = "beaglebone:green:usr2";
+			gpios = <&gpio2 23 0>;
+			default-state = "off";
+		};
+
+		led@5 {
+			label = "beaglebone:green:usr3";
+			gpios = <&gpio2 24 0>;
+			default-state = "off";
+		};
+	};
 };
 
 /include/ "tps65217.dtsi"
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 185d6325a458..9f65f17ebdf8 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -13,11 +13,39 @@
 	model = "TI AM335x EVM";
 	compatible = "ti,am335x-evm", "ti,am33xx";
 
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd1_reg>;
+		};
+	};
+
 	memory {
 		device_type = "memory";
 		reg = <0x80000000 0x10000000>; /* 256 MB */
 	};
 
+	am33xx_pinmux: pinmux@44e10800 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0>;
+
+		matrix_keypad_s0: matrix_keypad_s0 {
+			pinctrl-single,pins = <
+				0x54 0x7	/* gpmc_a5.gpio1_21, OUTPUT | MODE7 */
+				0x58 0x7	/* gpmc_a6.gpio1_22, OUTPUT | MODE7 */
+				0x64 0x27	/* gpmc_a9.gpio1_25, INPUT | MODE7 */
+				0x68 0x27	/* gpmc_a10.gpio1_26, INPUT | MODE7 */
+				0x6c 0x27	/* gpmc_a11.gpio1_27, INPUT | MODE7 */
+			>;
+		};
+
+		volume_keys_s0: volume_keys_s0 {
+			pinctrl-single,pins = <
+				0x150 0x27	/* spi0_sclk.gpio0_2, INPUT | MODE7 */
+				0x154 0x27	/* spi0_d0.gpio0_3, INPUT | MODE7 */
+			>;
+		};
+	};
+
 	ocp {
 		uart1: serial@44e09000 {
 			status = "okay";
@@ -31,6 +59,49 @@
 				reg = <0x2d>;
 			};
 		};
+
+		i2c2: i2c@4802a000 {
+			status = "okay";
+			clock-frequency = <100000>;
+
+			lis331dlh: lis331dlh@18 {
+				compatible = "st,lis331dlh", "st,lis3lv02d";
+				reg = <0x18>;
+				Vdd-supply = <&lis3_reg>;
+				Vdd_IO-supply = <&lis3_reg>;
+
+				st,click-single-x;
+				st,click-single-y;
+				st,click-single-z;
+				st,click-thresh-x = <10>;
+				st,click-thresh-y = <10>;
+				st,click-thresh-z = <10>;
+				st,irq1-click;
+				st,irq2-click;
+				st,wakeup-x-lo;
+				st,wakeup-x-hi;
+				st,wakeup-y-lo;
+				st,wakeup-y-hi;
+				st,wakeup-z-lo;
+				st,wakeup-z-hi;
+				st,min-limit-x = <120>;
+				st,min-limit-y = <120>;
+				st,min-limit-z = <140>;
+				st,max-limit-x = <550>;
+				st,max-limit-y = <550>;
+				st,max-limit-z = <750>;
+			};
+
+			tsl2550: tsl2550@39 {
+				compatible = "taos,tsl2550";
+				reg = <0x39>;
+			};
+
+			tmp275: tmp275@48 {
+				compatible = "ti,tmp275";
+				reg = <0x48>;
+			};
+		};
 	};
 
 	vbat: fixedregulator@0 {
@@ -40,6 +111,53 @@
 		regulator-max-microvolt = <5000000>;
 		regulator-boot-on;
 	};
+
+	lis3_reg: fixedregulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "lis3_reg";
+		regulator-boot-on;
+	};
+
+	matrix_keypad: matrix_keypad@0 {
+		compatible = "gpio-matrix-keypad";
+		debounce-delay-ms = <5>;
+		col-scan-delay-us = <2>;
+
+		row-gpios = <&gpio2 25 0	/* Bank1, pin25 */
+			     &gpio2 26 0	/* Bank1, pin26 */
+			     &gpio2 27 0>;	/* Bank1, pin27 */
+
+		col-gpios = <&gpio2 21 0	/* Bank1, pin21 */
+			     &gpio2 22 0>;	/* Bank1, pin22 */
+
+		linux,keymap = <0x0000008b	/* MENU */
+				0x0100009e	/* BACK */
+				0x02000069	/* LEFT */
+				0x0001006a	/* RIGHT */
+				0x0101001c	/* ENTER */
+				0x0201006c>;	/* DOWN */
+	};
+
+	gpio_keys: volume_keys@0 {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+
+		switch@9 {
+			label = "volume-up";
+			linux,code = <115>;
+			gpios = <&gpio1 2 1>;
+			gpio-key,wakeup;
+		};
+
+		switch@10 {
+			label = "volume-down";
+			linux,code = <114>;
+			gpios = <&gpio1 3 1>;
+			gpio-key,wakeup;
+		};
+	};
 };
 
 /include/ "tps65910.dtsi"
diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
new file mode 100644
index 000000000000..f5a6162a4ff2
--- /dev/null
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -0,0 +1,250 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * AM335x Starter Kit
+ * http://www.ti.com/tool/tmdssk3358
+ */
+
+/dts-v1/;
+
+/include/ "am33xx.dtsi"
+
+/ {
+	model = "TI AM335x EVM-SK";
+	compatible = "ti,am335x-evmsk", "ti,am33xx";
+
+	cpus {
+		cpu@0 {
+			cpu0-supply = <&vdd1_reg>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	am33xx_pinmux: pinmux@44e10800 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&user_leds_s0 &gpio_keys_s0>;
+
+		user_leds_s0: user_leds_s0 {
+			pinctrl-single,pins = <
+				0x10 0x7	/* gpmc_ad4.gpio1_4, OUTPUT | MODE7 */
+				0x14 0x7	/* gpmc_ad5.gpio1_5, OUTPUT | MODE7 */
+				0x18 0x7	/* gpmc_ad6.gpio1_6, OUTPUT | MODE7 */
+				0x1c 0x7	/* gpmc_ad7.gpio1_7, OUTPUT | MODE7 */
+			>;
+		};
+
+		gpio_keys_s0: gpio_keys_s0 {
+			pinctrl-single,pins = <
+				0x94 0x27	/* gpmc_oen_ren.gpio2_3, INPUT | MODE7 */
+				0x90 0x27	/* gpmc_advn_ale.gpio2_2, INPUT | MODE7 */
+				0x70 0x27	/* gpmc_wait0.gpio0_30, INPUT | MODE7 */
+				0x9c 0x27	/* gpmc_ben0_cle.gpio2_5, INPUT | MODE7 */
+			>;
+		};
+	};
+
+	ocp {
+		uart1: serial@44e09000 {
+			status = "okay";
+		};
+
+		i2c1: i2c@44e0b000 {
+			status = "okay";
+			clock-frequency = <400000>;
+
+			tps: tps@2d {
+				reg = <0x2d>;
+			};
+
+			lis331dlh: lis331dlh@18 {
+				compatible = "st,lis331dlh", "st,lis3lv02d";
+				reg = <0x18>;
+				Vdd-supply = <&lis3_reg>;
+				Vdd_IO-supply = <&lis3_reg>;
+
+				st,click-single-x;
+				st,click-single-y;
+				st,click-single-z;
+				st,click-thresh-x = <10>;
+				st,click-thresh-y = <10>;
+				st,click-thresh-z = <10>;
+				st,irq1-click;
+				st,irq2-click;
+				st,wakeup-x-lo;
+				st,wakeup-x-hi;
+				st,wakeup-y-lo;
+				st,wakeup-y-hi;
+				st,wakeup-z-lo;
+				st,wakeup-z-hi;
+				st,min-limit-x = <120>;
+				st,min-limit-y = <120>;
+				st,min-limit-z = <140>;
+				st,max-limit-x = <550>;
+				st,max-limit-y = <550>;
+				st,max-limit-z = <750>;
+			};
+		};
+	};
+
+	vbat: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbat";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+	};
+
+	lis3_reg: fixedregulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "lis3_reg";
+		regulator-boot-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led@1 {
+			label = "evmsk:green:usr0";
+			gpios = <&gpio2 4 0>;
+			default-state = "off";
+		};
+
+		led@2 {
+			label = "evmsk:green:usr1";
+			gpios = <&gpio2 5 0>;
+			default-state = "off";
+		};
+
+		led@3 {
+			label = "evmsk:green:mmc0";
+			gpios = <&gpio2 6 0>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led@4 {
+			label = "evmsk:green:heartbeat";
+			gpios = <&gpio2 7 0>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+	};
+
+	gpio_buttons: gpio_buttons@0 {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch@1 {
+			label = "button0";
+			linux,code = <0x100>;
+			gpios = <&gpio3 3 0>;
+		};
+
+		switch@2 {
+			label = "button1";
+			linux,code = <0x101>;
+			gpios = <&gpio3 2 0>;
+		};
+
+		switch@3 {
+			label = "button2";
+			linux,code = <0x102>;
+			gpios = <&gpio1 30 0>;
+			gpio-key,wakeup;
+		};
+
+		switch@4 {
+			label = "button3";
+			linux,code = <0x103>;
+			gpios = <&gpio3 5 0>;
+		};
+	};
+};
+
+/include/ "tps65910.dtsi"
+
+&tps {
+	vcc1-supply = <&vbat>;
+	vcc2-supply = <&vbat>;
+	vcc3-supply = <&vbat>;
+	vcc4-supply = <&vbat>;
+	vcc5-supply = <&vbat>;
+	vcc6-supply = <&vbat>;
+	vcc7-supply = <&vbat>;
+	vccio-supply = <&vbat>;
+
+	regulators {
+		vrtc_reg: regulator@0 {
+			regulator-always-on;
+		};
+
+		vio_reg: regulator@1 {
+			regulator-always-on;
+		};
+
+		vdd1_reg: regulator@2 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
+			regulator-name = "vdd_mpu";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1312500>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd2_reg: regulator@3 {
+			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
+			regulator-name = "vdd_core";
+			regulator-min-microvolt = <912500>;
+			regulator-max-microvolt = <1150000>;
+			regulator-boot-on;
+			regulator-always-on;
+		};
+
+		vdd3_reg: regulator@4 {
+			regulator-always-on;
+		};
+
+		vdig1_reg: regulator@5 {
+			regulator-always-on;
+		};
+
+		vdig2_reg: regulator@6 {
+			regulator-always-on;
+		};
+
+		vpll_reg: regulator@7 {
+			regulator-always-on;
+		};
+
+		vdac_reg: regulator@8 {
+			regulator-always-on;
+		};
+
+		vaux1_reg: regulator@9 {
+			regulator-always-on;
+		};
+
+		vaux2_reg: regulator@10 {
+			regulator-always-on;
+		};
+
+		vaux33_reg: regulator@11 {
+			regulator-always-on;
+		};
+
+		vmmc_reg: regulator@12 {
+			regulator-always-on;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index bb31bff01998..20a3f29a6bfe 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -12,6 +12,7 @@
 
 / {
 	compatible = "ti,am33xx";
+	interrupt-parent = <&intc>;
 
 	aliases {
 		serial0 = &uart1;
@@ -25,6 +26,21 @@
 	cpus {
 		cpu@0 {
 			compatible = "arm,cortex-a8";
+
+			/*
+			 * To consider voltage drop between PMIC and SoC,
+			 * tolerance value is reduced to 2% from 4% and
+			 * voltage value is increased as a precaution.
+			 */
+			operating-points = <
+				/* kHz    uV */
+				720000  1285000
+				600000  1225000
+				500000  1125000
+				275000  1125000
+			>;
+			voltage-tolerance = <2>; /* 2 percentage */
+			clock-latency = <300000>; /* From omap-cpufreq driver */
 		};
 	};
 
@@ -40,6 +56,15 @@
 		};
 	};
 
+	am33xx_pinmux: pinmux@44e10800 {
+		compatible = "pinctrl-single";
+		reg = <0x44e10800 0x0238>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0x7f>;
+	};
+
 	/*
 	 * XXX: Use a flat representation of the AM33XX interconnect.
 	 * The real AM33XX interconnect network is quite complex.Since
@@ -70,7 +95,6 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			reg = <0x44e07000 0x1000>;
-			interrupt-parent = <&intc>;
 			interrupts = <96>;
 		};
 
@@ -82,7 +106,6 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			reg = <0x4804c000 0x1000>;
-			interrupt-parent = <&intc>;
 			interrupts = <98>;
 		};
 
@@ -94,7 +117,6 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			reg = <0x481ac000 0x1000>;
-			interrupt-parent = <&intc>;
 			interrupts = <32>;
 		};
 
@@ -106,7 +128,6 @@
 			interrupt-controller;
 			#interrupt-cells = <1>;
 			reg = <0x481ae000 0x1000>;
-			interrupt-parent = <&intc>;
 			interrupts = <62>;
 		};
 
@@ -115,7 +136,6 @@
 			ti,hwmods = "uart1";
 			clock-frequency = <48000000>;
 			reg = <0x44e09000 0x2000>;
-			interrupt-parent = <&intc>;
 			interrupts = <72>;
 			status = "disabled";
 		};
@@ -125,7 +145,6 @@
 			ti,hwmods = "uart2";
 			clock-frequency = <48000000>;
 			reg = <0x48022000 0x2000>;
-			interrupt-parent = <&intc>;
 			interrupts = <73>;
 			status = "disabled";
 		};
@@ -135,7 +154,6 @@
 			ti,hwmods = "uart3";
 			clock-frequency = <48000000>;
 			reg = <0x48024000 0x2000>;
-			interrupt-parent = <&intc>;
 			interrupts = <74>;
 			status = "disabled";
 		};
@@ -145,7 +163,6 @@
 			ti,hwmods = "uart4";
 			clock-frequency = <48000000>;
 			reg = <0x481a6000 0x2000>;
-			interrupt-parent = <&intc>;
 			interrupts = <44>;
 			status = "disabled";
 		};
@@ -155,7 +172,6 @@
 			ti,hwmods = "uart5";
 			clock-frequency = <48000000>;
 			reg = <0x481a8000 0x2000>;
-			interrupt-parent = <&intc>;
 			interrupts = <45>;
 			status = "disabled";
 		};
@@ -165,7 +181,6 @@
 			ti,hwmods = "uart6";
 			clock-frequency = <48000000>;
 			reg = <0x481aa000 0x2000>;
-			interrupt-parent = <&intc>;
 			interrupts = <46>;
 			status = "disabled";
 		};
@@ -176,7 +191,6 @@
 			#size-cells = <0>;
 			ti,hwmods = "i2c1";
 			reg = <0x44e0b000 0x1000>;
-			interrupt-parent = <&intc>;
 			interrupts = <70>;
 			status = "disabled";
 		};
@@ -187,7 +201,6 @@
 			#size-cells = <0>;
 			ti,hwmods = "i2c2";
 			reg = <0x4802a000 0x1000>;
-			interrupt-parent = <&intc>;
 			interrupts = <71>;
 			status = "disabled";
 		};
@@ -198,7 +211,6 @@
 			#size-cells = <0>;
 			ti,hwmods = "i2c3";
 			reg = <0x4819c000 0x1000>;
-			interrupt-parent = <&intc>;
 			interrupts = <30>;
 			status = "disabled";
 		};
@@ -207,8 +219,124 @@
 			compatible = "ti,omap3-wdt";
 			ti,hwmods = "wd_timer2";
 			reg = <0x44e35000 0x1000>;
-			interrupt-parent = <&intc>;
 			interrupts = <91>;
 		};
+
+		dcan0: d_can@481cc000 {
+			compatible = "bosch,d_can";
+			ti,hwmods = "d_can0";
+			reg = <0x481cc000 0x2000>;
+			interrupts = <52>;
+			status = "disabled";
+		};
+
+		dcan1: d_can@481d0000 {
+			compatible = "bosch,d_can";
+			ti,hwmods = "d_can1";
+			reg = <0x481d0000 0x2000>;
+			interrupts = <55>;
+			status = "disabled";
+		};
+
+		timer1: timer@44e31000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x44e31000 0x400>;
+			interrupts = <67>;
+			ti,hwmods = "timer1";
+			ti,timer-alwon;
+		};
+
+		timer2: timer@48040000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48040000 0x400>;
+			interrupts = <68>;
+			ti,hwmods = "timer2";
+		};
+
+		timer3: timer@48042000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48042000 0x400>;
+			interrupts = <69>;
+			ti,hwmods = "timer3";
+		};
+
+		timer4: timer@48044000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48044000 0x400>;
+			interrupts = <92>;
+			ti,hwmods = "timer4";
+			ti,timer-pwm;
+		};
+
+		timer5: timer@48046000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48046000 0x400>;
+			interrupts = <93>;
+			ti,hwmods = "timer5";
+			ti,timer-pwm;
+		};
+
+		timer6: timer@48048000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48048000 0x400>;
+			interrupts = <94>;
+			ti,hwmods = "timer6";
+			ti,timer-pwm;
+		};
+
+		timer7: timer@4804a000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4804a000 0x400>;
+			interrupts = <95>;
+			ti,hwmods = "timer7";
+			ti,timer-pwm;
+		};
+
+		rtc@44e3e000 {
+			compatible = "ti,da830-rtc";
+			reg = <0x44e3e000 0x1000>;
+			interrupts = <75
+				      76>;
+			ti,hwmods = "rtc";
+		};
+
+		spi0: spi@48030000 {
+			compatible = "ti,omap4-mcspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x48030000 0x400>;
+			interrupt = <65>;
+			ti,spi-num-cs = <2>;
+			ti,hwmods = "spi0";
+			status = "disabled";
+		};
+
+		spi1: spi@481a0000 {
+			compatible = "ti,omap4-mcspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x481a0000 0x400>;
+			interrupt = <125>;
+			ti,spi-num-cs = <2>;
+			ti,hwmods = "spi1";
+			status = "disabled";
+		};
+
+		usb@47400000 {
+			compatible = "ti,musb-am33xx";
+			reg = <0x47400000 0x1000	/* usbss */
+			       0x47401000 0x800		/* musb instance 0 */
+			       0x47401800 0x800>;	/* musb instance 1 */
+			interrupts = <17		/* usbss */
+				      18		/* musb instance 0 */
+				      19>;		/* musb instance 1 */
+			multipoint = <1>;
+			num-eps = <16>;
+			ram-bits = <12>;
+			port0-mode = <3>;
+			port1-mode = <3>;
+			power = <250>;
+			ti,hwmods = "usb_otg_hs";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
index 581cb081cb0f..761c4b69b25b 100644
--- a/arch/arm/boot/dts/omap2.dtsi
+++ b/arch/arm/boot/dts/omap2.dtsi
@@ -12,6 +12,7 @@
 
 / {
 	compatible = "ti,omap2430", "ti,omap2420", "ti,omap2";
+	interrupt-parent = <&intc>;
 
 	aliases {
 		serial0 = &uart1;
@@ -65,5 +66,90 @@
 			ti,hwmods = "uart3";
 			clock-frequency = <48000000>;
 		};
+
+		timer2: timer@4802a000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4802a000 0x400>;
+			interrupts = <38>;
+			ti,hwmods = "timer2";
+		};
+
+		timer3: timer@48078000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48078000 0x400>;
+			interrupts = <39>;
+			ti,hwmods = "timer3";
+		};
+
+		timer4: timer@4807a000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4807a000 0x400>;
+			interrupts = <40>;
+			ti,hwmods = "timer4";
+		};
+
+		timer5: timer@4807c000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4807c000 0x400>;
+			interrupts = <41>;
+			ti,hwmods = "timer5";
+			ti,timer-dsp;
+		};
+
+		timer6: timer@4807e000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4807e000 0x400>;
+			interrupts = <42>;
+			ti,hwmods = "timer6";
+			ti,timer-dsp;
+		};
+
+		timer7: timer@48080000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48080000 0x400>;
+			interrupts = <43>;
+			ti,hwmods = "timer7";
+			ti,timer-dsp;
+		};
+
+		timer8: timer@48082000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48082000 0x400>;
+			interrupts = <44>;
+			ti,hwmods = "timer8";
+			ti,timer-dsp;
+		};
+
+		timer9: timer@48084000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48084000 0x400>;
+			interrupts = <45>;
+			ti,hwmods = "timer9";
+			ti,timer-pwm;
+		};
+
+		timer10: timer@48086000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48086000 0x400>;
+			interrupts = <46>;
+			ti,hwmods = "timer10";
+			ti,timer-pwm;
+		};
+
+		timer11: timer@48088000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48088000 0x400>;
+			interrupts = <47>;
+			ti,hwmods = "timer11";
+			ti,timer-pwm;
+		};
+
+		timer12: timer@4808a000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4808a000 0x400>;
+			interrupts = <48>;
+			ti,hwmods = "timer12";
+			ti,timer-pwm;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi
index bfd76b4a0ddc..af6560908905 100644
--- a/arch/arm/boot/dts/omap2420.dtsi
+++ b/arch/arm/boot/dts/omap2420.dtsi
@@ -14,6 +14,12 @@
 	compatible = "ti,omap2420", "ti,omap2";
 
 	ocp {
+		counter32k: counter@48004000 {
+			compatible = "ti,omap-counter32k";
+			reg = <0x48004000 0x20>;
+			ti,hwmods = "counter_32k";
+		};
+
 		omap2420_pmx: pinmux@48000030 {
 			compatible = "ti,omap2420-padconf", "pinctrl-single";
 			reg = <0x48000030 0x0113>;
@@ -30,7 +36,6 @@
 			interrupts = <59>, /* TX interrupt */
 				     <60>; /* RX interrupt */
 			interrupt-names = "tx", "rx";
-			interrupt-parent = <&intc>;
 			ti,hwmods = "mcbsp1";
 		};
 
@@ -41,8 +46,15 @@
 			interrupts = <62>, /* TX interrupt */
 				     <63>; /* RX interrupt */
 			interrupt-names = "tx", "rx";
-			interrupt-parent = <&intc>;
 			ti,hwmods = "mcbsp2";
 		};
+
+		timer1: timer@48028000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48028000 0x400>;
+			interrupts = <37>;
+			ti,hwmods = "timer1";
+			ti,timer-alwon;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
index 4565d9750f4d..c3924457c9b6 100644
--- a/arch/arm/boot/dts/omap2430.dtsi
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -14,6 +14,12 @@
 	compatible = "ti,omap2430", "ti,omap2";
 
 	ocp {
+		counter32k: counter@49020000 {
+			compatible = "ti,omap-counter32k";
+			reg = <0x49020000 0x20>;
+			ti,hwmods = "counter_32k";
+		};
+
 		omap2430_pmx: pinmux@49002030 {
 			compatible = "ti,omap2430-padconf", "pinctrl-single";
 			reg = <0x49002030 0x0154>;
@@ -32,7 +38,6 @@
 				     <60>, /* RX interrupt */
 				     <61>; /* RX overflow interrupt */
 			interrupt-names = "common", "tx", "rx", "rx_overflow";
-			interrupt-parent = <&intc>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp1";
 		};
@@ -45,7 +50,6 @@
 				     <62>, /* TX interrupt */
 				     <63>; /* RX interrupt */
 			interrupt-names = "common", "tx", "rx";
-			interrupt-parent = <&intc>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp2";
 		};
@@ -58,7 +62,6 @@
 				     <89>, /* TX interrupt */
 				     <90>; /* RX interrupt */
 			interrupt-names = "common", "tx", "rx";
-			interrupt-parent = <&intc>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp3";
 		};
@@ -71,7 +74,6 @@
 				     <54>, /* TX interrupt */
 				     <55>; /* RX interrupt */
 			interrupt-names = "common", "tx", "rx";
-			interrupt-parent = <&intc>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp4";
 		};
@@ -84,9 +86,16 @@
 				     <81>, /* TX interrupt */
 				     <82>; /* RX interrupt */
 			interrupt-names = "common", "tx", "rx";
-			interrupt-parent = <&intc>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp5";
 		};
+
+		timer1: timer@49018000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x49018000 0x400>;
+			interrupts = <37>;
+			ti,hwmods = "timer1";
+			ti,timer-alwon;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index c38cf76df81f..3705a81c1fc2 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -55,12 +55,6 @@
 		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
 		interrupt-parent = <&intc>;
 
-		vsim: regulator-vsim {
-			compatible = "ti,twl4030-vsim";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3000000>;
-		};
-
 		twl_audio: audio {
 			compatible = "ti,twl4030-audio";
 			codec {
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
new file mode 100644
index 000000000000..f624dc85d441
--- /dev/null
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -0,0 +1,67 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+/include/ "omap3.dtsi"
+
+/ {
+	model = "TI OMAP3 BeagleBoard";
+	compatible = "ti,omap3-beagle", "ti,omap3";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>; /* 256 MB */
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pmu_stat {
+			label = "beagleboard::pmu_stat";
+			gpios = <&twl_gpio 19 0>; /* LEDB */
+		};
+
+		heartbeat {
+			label = "beagleboard::usr0";
+			gpios = <&gpio5 22 0>; /* 150 -> D6 LED */
+			linux,default-trigger = "heartbeat";
+		};
+
+		mmc {
+			label = "beagleboard::usr1";
+			gpios = <&gpio5 21 0>; /* 149 -> D7 LED */
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+};
+
+&i2c1 {
+	clock-frequency = <2600000>;
+
+	twl: twl@48 {
+		reg = <0x48>;
+		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
+		interrupt-parent = <&intc>;
+	};
+};
+
+/include/ "twl4030.dtsi"
+
+&mmc1 {
+	vmmc-supply = <&vmmc1>;
+	vmmc_aux-supply = <&vsim>;
+	bus-width = <8>;
+};
+
+&mmc2 {
+	status = "disabled";
+};
+
+&mmc3 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 696e929d0304..1acc26148ffc 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -12,6 +12,7 @@
 
 / {
 	compatible = "ti,omap3430", "ti,omap3";
+	interrupt-parent = <&intc>;
 
 	aliases {
 		serial0 = &uart1;
@@ -60,6 +61,12 @@
 		ranges;
 		ti,hwmods = "l3_main";
 
+		counter32k: counter@48320000 {
+			compatible = "ti,omap-counter32k";
+			reg = <0x48320000 0x20>;
+			ti,hwmods = "counter_32k";
+		};
+
 		intc: interrupt-controller@48200000 {
 			compatible = "ti,omap2-intc";
 			interrupt-controller;
@@ -240,7 +247,6 @@
 				     <59>, /* TX interrupt */
 				     <60>; /* RX interrupt */
 			interrupt-names = "common", "tx", "rx";
-			interrupt-parent = <&intc>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp1";
 		};
@@ -255,7 +261,6 @@
 				     <63>, /* RX interrupt */
 				     <4>;  /* Sidetone */
 			interrupt-names = "common", "tx", "rx", "sidetone";
-			interrupt-parent = <&intc>;
 			ti,buffer-size = <1280>;
 			ti,hwmods = "mcbsp2", "mcbsp2_sidetone";
 		};
@@ -270,7 +275,6 @@
 				     <90>, /* RX interrupt */
 				     <5>;  /* Sidetone */
 			interrupt-names = "common", "tx", "rx", "sidetone";
-			interrupt-parent = <&intc>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp3", "mcbsp3_sidetone";
 		};
@@ -283,7 +287,6 @@
 				     <54>, /* TX interrupt */
 				     <55>; /* RX interrupt */
 			interrupt-names = "common", "tx", "rx";
-			interrupt-parent = <&intc>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp4";
 		};
@@ -296,9 +299,103 @@
 				     <81>, /* TX interrupt */
 				     <82>; /* RX interrupt */
 			interrupt-names = "common", "tx", "rx";
-			interrupt-parent = <&intc>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp5";
 		};
+
+		timer1: timer@48318000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48318000 0x400>;
+			interrupts = <37>;
+			ti,hwmods = "timer1";
+			ti,timer-alwon;
+		};
+
+		timer2: timer@49032000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x49032000 0x400>;
+			interrupts = <38>;
+			ti,hwmods = "timer2";
+		};
+
+		timer3: timer@49034000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x49034000 0x400>;
+			interrupts = <39>;
+			ti,hwmods = "timer3";
+		};
+
+		timer4: timer@49036000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x49036000 0x400>;
+			interrupts = <40>;
+			ti,hwmods = "timer4";
+		};
+
+		timer5: timer@49038000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x49038000 0x400>;
+			interrupts = <41>;
+			ti,hwmods = "timer5";
+			ti,timer-dsp;
+		};
+
+		timer6: timer@4903a000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4903a000 0x400>;
+			interrupts = <42>;
+			ti,hwmods = "timer6";
+			ti,timer-dsp;
+		};
+
+		timer7: timer@4903c000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4903c000 0x400>;
+			interrupts = <43>;
+			ti,hwmods = "timer7";
+			ti,timer-dsp;
+		};
+
+		timer8: timer@4903e000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4903e000 0x400>;
+			interrupts = <44>;
+			ti,hwmods = "timer8";
+			ti,timer-pwm;
+			ti,timer-dsp;
+		};
+
+		timer9: timer@49040000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x49040000 0x400>;
+			interrupts = <45>;
+			ti,hwmods = "timer9";
+			ti,timer-pwm;
+		};
+
+		timer10: timer@48086000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48086000 0x400>;
+			interrupts = <46>;
+			ti,hwmods = "timer10";
+			ti,timer-pwm;
+		};
+
+		timer11: timer@48088000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48088000 0x400>;
+			interrupts = <47>;
+			ti,hwmods = "timer11";
+			ti,timer-pwm;
+		};
+
+		timer12: timer@48304000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48304000 0x400>;
+			interrupts = <95>;
+			ti,hwmods = "timer12";
+			ti,timer-alwon;
+			ti,timer-secure;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/omap4-panda-a4.dts b/arch/arm/boot/dts/omap4-panda-a4.dts
new file mode 100644
index 000000000000..75466d2abfb5
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-panda-a4.dts
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/include/ "omap4-panda.dts"
+
+/* Pandaboard Rev A4+ have external pullups on SCL & SDA */
+&dss_hdmi_pins {
+	pinctrl-single,pins = <
+		0x5a 0x118	/* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
+		0x5c 0x100	/* hdmi_scl.hdmi_scl INPUT | MODE 0 */
+		0x5e 0x100	/* hdmi_sda.hdmi_sda INPUT | MODE 0 */
+		>;
+};
diff --git a/arch/arm/boot/dts/omap4-pandaES.dts b/arch/arm/boot/dts/omap4-panda-es.dts
index d4ba43a48d9b..73bc1a67e444 100644
--- a/arch/arm/boot/dts/omap4-pandaES.dts
+++ b/arch/arm/boot/dts/omap4-panda-es.dts
@@ -22,3 +22,12 @@
 		"AFML", "Line In",
 		"AFMR", "Line In";
 };
+
+/* PandaboardES has external pullups on SCL & SDA */
+&dss_hdmi_pins {
+	pinctrl-single,pins = <
+		0x5a 0x118	/* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
+		0x5c 0x100	/* hdmi_scl.hdmi_scl INPUT | MODE 0 */
+		0x5e 0x100	/* hdmi_sda.hdmi_sda INPUT | MODE 0 */
+		>;
+};
diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
index e8f927cbb376..4122efe31cfd 100644
--- a/arch/arm/boot/dts/omap4-panda.dts
+++ b/arch/arm/boot/dts/omap4-panda.dts
@@ -65,6 +65,8 @@
 			&twl6040_pins
 			&mcpdm_pins
 			&mcbsp1_pins
+			&dss_hdmi_pins
+			&tpd12s015_pins
 	>;
 
 	twl6040_pins: pinmux_twl6040_pins {
@@ -92,6 +94,22 @@
 			0xc4 0x100	/* abe_mcbsp1_fsx.abe_mcbsp1_fsx INPUT | MODE0 */
 		>;
 	};
+
+	dss_hdmi_pins: pinmux_dss_hdmi_pins {
+		pinctrl-single,pins = <
+			0x5a 0x118	/* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
+			0x5c 0x118	/* hdmi_scl.hdmi_scl INPUT PULLUP | MODE 0 */
+			0x5e 0x118	/* hdmi_sda.hdmi_sda INPUT PULLUP | MODE 0 */
+		>;
+	};
+
+	tpd12s015_pins: pinmux_tpd12s015_pins {
+		pinctrl-single,pins = <
+			0x22 0x3	/* gpmc_a17.gpio_41 OUTPUT | MODE3 */
+			0x48 0x3	/* gpmc_nbe1.gpio_60 OUTPUT | MODE3 */
+			0x58 0x10b	/* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */
+		>;
+	};
 };
 
 &i2c1 {
@@ -184,3 +202,7 @@
 &dmic {
 	status = "disabled";
 };
+
+&twl_usb_comparator {
+	usb-supply = <&vusb>;
+};
diff --git a/arch/arm/boot/dts/omap4-sdp-es23plus.dts b/arch/arm/boot/dts/omap4-sdp-es23plus.dts
new file mode 100644
index 000000000000..b4a40ffbce31
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-sdp-es23plus.dts
@@ -0,0 +1,17 @@
+/*
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/include/ "omap4-sdp.dts"
+
+/* SDP boards with 4430 ES2.3+ or 4460 have external pullups on SCL & SDA */
+&dss_hdmi_pins {
+	pinctrl-single,pins = <
+		0x5a 0x118	/* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
+		0x5c 0x100	/* hdmi_scl.hdmi_scl INPUT | MODE 0 */
+		0x5e 0x100	/* hdmi_sda.hdmi_sda INPUT | MODE 0 */
+		>;
+};
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 5b7e04fbff50..43e5258a9372 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -124,6 +124,8 @@
 			&dmic_pins
 			&mcbsp1_pins
 			&mcbsp2_pins
+			&dss_hdmi_pins
+			&tpd12s015_pins
 	>;
 
 	uart2_pins: pinmux_uart2_pins {
@@ -194,6 +196,22 @@
 			0xbc 0x100	/* abe_mcbsp2_fsx.abe_mcbsp2_fsx INPUT | MODE0 */
 		>;
 	};
+
+	dss_hdmi_pins: pinmux_dss_hdmi_pins {
+		pinctrl-single,pins = <
+			0x5a 0x118	/* hdmi_cec.hdmi_cec INPUT PULLUP | MODE 0 */
+			0x5c 0x118	/* hdmi_scl.hdmi_scl INPUT PULLUP | MODE 0 */
+			0x5e 0x118	/* hdmi_sda.hdmi_sda INPUT PULLUP | MODE 0 */
+		>;
+	};
+
+	tpd12s015_pins: pinmux_tpd12s015_pins {
+		pinctrl-single,pins = <
+			0x22 0x3	/* gpmc_a17.gpio_41 OUTPUT | MODE3 */
+			0x48 0x3	/* gpmc_nbe1.gpio_60 OUTPUT | MODE3 */
+			0x58 0x10b	/* hdmi_hpd.gpio_63 INPUT PULLDOWN | MODE3 */
+		>;
+	};
 };
 
 &i2c1 {
@@ -406,3 +424,7 @@
 &mcbsp3 {
 	status = "disabled";
 };
+
+&twl_usb_comparator {
+	usb-supply = <&vusb>;
+};
diff --git a/arch/arm/boot/dts/omap4-var_som.dts b/arch/arm/boot/dts/omap4-var-som.dts
index 6601e6af6092..6601e6af6092 100644
--- a/arch/arm/boot/dts/omap4-var_som.dts
+++ b/arch/arm/boot/dts/omap4-var-som.dts
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 3883f94fdbd0..739bb79e410e 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -95,6 +95,12 @@
 		ranges;
 		ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
 
+		counter32k: counter@4a304000 {
+			compatible = "ti,omap-counter32k";
+			reg = <0x4a304000 0x20>;
+			ti,hwmods = "counter_32k";
+		};
+
 		omap4_pmx_core: pinmux@4a100040 {
 			compatible = "ti,omap4-padconf", "pinctrl-single";
 			reg = <0x4a100040 0x0196>;
@@ -340,7 +346,6 @@
 			      <0x49032000 0x7f>; /* L3 Interconnect */
 			reg-names = "mpu", "dma";
 			interrupts = <0 112 0x4>;
-			interrupt-parent = <&gic>;
 			ti,hwmods = "mcpdm";
 		};
 
@@ -350,7 +355,6 @@
 			      <0x4902e000 0x7f>; /* L3 Interconnect */
 			reg-names = "mpu", "dma";
 			interrupts = <0 114 0x4>;
-			interrupt-parent = <&gic>;
 			ti,hwmods = "dmic";
 		};
 
@@ -361,7 +365,6 @@
 			reg-names = "mpu", "dma";
 			interrupts = <0 17 0x4>;
 			interrupt-names = "common";
-			interrupt-parent = <&gic>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp1";
 		};
@@ -373,7 +376,6 @@
 			reg-names = "mpu", "dma";
 			interrupts = <0 22 0x4>;
 			interrupt-names = "common";
-			interrupt-parent = <&gic>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp2";
 		};
@@ -385,7 +387,6 @@
 			reg-names = "mpu", "dma";
 			interrupts = <0 23 0x4>;
 			interrupt-names = "common";
-			interrupt-parent = <&gic>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp3";
 		};
@@ -396,7 +397,6 @@
 			reg-names = "mpu";
 			interrupts = <0 16 0x4>;
 			interrupt-names = "common";
-			interrupt-parent = <&gic>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp4";
 		};
@@ -431,12 +431,103 @@
 			hw-caps-temp-alert;
 		};
 
-		ocp2scp {
+		ocp2scp@4a0ad000 {
 			compatible = "ti,omap-ocp2scp";
+			reg = <0x4a0ad000 0x1f>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
 			ti,hwmods = "ocp2scp_usb_phy";
 		};
+
+		timer1: timer@4a318000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4a318000 0x80>;
+			interrupts = <0 37 0x4>;
+			ti,hwmods = "timer1";
+			ti,timer-alwon;
+		};
+
+		timer2: timer@48032000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48032000 0x80>;
+			interrupts = <0 38 0x4>;
+			ti,hwmods = "timer2";
+		};
+
+		timer3: timer@48034000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48034000 0x80>;
+			interrupts = <0 39 0x4>;
+			ti,hwmods = "timer3";
+		};
+
+		timer4: timer@48036000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48036000 0x80>;
+			interrupts = <0 40 0x4>;
+			ti,hwmods = "timer4";
+		};
+
+		timer5: timer@40138000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x40138000 0x80>,
+			      <0x49038000 0x80>;
+			interrupts = <0 41 0x4>;
+			ti,hwmods = "timer5";
+			ti,timer-dsp;
+		};
+
+		timer6: timer@4013a000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4013a000 0x80>,
+			      <0x4903a000 0x80>;
+			interrupts = <0 42 0x4>;
+			ti,hwmods = "timer6";
+			ti,timer-dsp;
+		};
+
+		timer7: timer@4013c000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4013c000 0x80>,
+			      <0x4903c000 0x80>;
+			interrupts = <0 43 0x4>;
+			ti,hwmods = "timer7";
+			ti,timer-dsp;
+		};
+
+		timer8: timer@4013e000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4013e000 0x80>,
+			      <0x4903e000 0x80>;
+			interrupts = <0 44 0x4>;
+			ti,hwmods = "timer8";
+			ti,timer-pwm;
+			ti,timer-dsp;
+		};
+
+		timer9: timer@4803e000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4803e000 0x80>;
+			interrupts = <0 45 0x4>;
+			ti,hwmods = "timer9";
+			ti,timer-pwm;
+		};
+
+		timer10: timer@48086000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48086000 0x80>;
+			interrupts = <0 46 0x4>;
+			ti,hwmods = "timer10";
+			ti,timer-pwm;
+		};
+
+		timer11: timer@48088000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48088000 0x80>;
+			interrupts = <0 47 0x4>;
+			ti,hwmods = "timer11";
+			ti,timer-pwm;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts
index c663eba73168..8722c15bbba2 100644
--- a/arch/arm/boot/dts/omap5-evm.dts
+++ b/arch/arm/boot/dts/omap5-evm.dts
@@ -8,6 +8,7 @@
 /dts-v1/;
 
 /include/ "omap5.dtsi"
+/include/ "samsung_k3pe0e000b.dtsi"
 
 / {
 	model = "TI OMAP5 EVM board";
@@ -15,7 +16,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x80000000 0x40000000>; /* 1 GB */
+		reg = <0x80000000 0x80000000>; /* 2 GB */
 	};
 
 	vmmcsd_fixed: fixedregulator-mmcsd {
@@ -140,3 +141,13 @@
 &mcbsp3 {
 	status = "disabled";
 };
+
+&emif1 {
+	cs1-used;
+	device-handle = <&samsung_K3PE0E000B>;
+};
+
+&emif2 {
+	cs1-used;
+	device-handle = <&samsung_K3PE0E000B>;
+};
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 42c78beb4fdc..790bb2a4b343 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -77,6 +77,12 @@
 		ranges;
 		ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3";
 
+		counter32k: counter@4ae04000 {
+			compatible = "ti,omap-counter32k";
+			reg = <0x4ae04000 0x40>;
+			ti,hwmods = "counter_32k";
+		};
+
 		omap5_pmx_core: pinmux@4a002840 {
 			compatible = "ti,omap4-padconf", "pinctrl-single";
 			reg = <0x4a002840 0x01b6>;
@@ -104,6 +110,8 @@
 
 		gpio1: gpio@4ae10000 {
 			compatible = "ti,omap4-gpio";
+			reg = <0x4ae10000 0x200>;
+			interrupts = <0 29 0x4>;
 			ti,hwmods = "gpio1";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -113,6 +121,8 @@
 
 		gpio2: gpio@48055000 {
 			compatible = "ti,omap4-gpio";
+			reg = <0x48055000 0x200>;
+			interrupts = <0 30 0x4>;
 			ti,hwmods = "gpio2";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -122,6 +132,8 @@
 
 		gpio3: gpio@48057000 {
 			compatible = "ti,omap4-gpio";
+			reg = <0x48057000 0x200>;
+			interrupts = <0 31 0x4>;
 			ti,hwmods = "gpio3";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -131,6 +143,8 @@
 
 		gpio4: gpio@48059000 {
 			compatible = "ti,omap4-gpio";
+			reg = <0x48059000 0x200>;
+			interrupts = <0 32 0x4>;
 			ti,hwmods = "gpio4";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -140,6 +154,8 @@
 
 		gpio5: gpio@4805b000 {
 			compatible = "ti,omap4-gpio";
+			reg = <0x4805b000 0x200>;
+			interrupts = <0 33 0x4>;
 			ti,hwmods = "gpio5";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -149,6 +165,8 @@
 
 		gpio6: gpio@4805d000 {
 			compatible = "ti,omap4-gpio";
+			reg = <0x4805d000 0x200>;
+			interrupts = <0 34 0x4>;
 			ti,hwmods = "gpio6";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -158,6 +176,8 @@
 
 		gpio7: gpio@48051000 {
 			compatible = "ti,omap4-gpio";
+			reg = <0x48051000 0x200>;
+			interrupts = <0 35 0x4>;
 			ti,hwmods = "gpio7";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -167,6 +187,8 @@
 
 		gpio8: gpio@48053000 {
 			compatible = "ti,omap4-gpio";
+			reg = <0x48053000 0x200>;
+			interrupts = <0 121 0x4>;
 			ti,hwmods = "gpio8";
 			gpio-controller;
 			#gpio-cells = <2>;
@@ -176,6 +198,8 @@
 
 		i2c1: i2c@48070000 {
 			compatible = "ti,omap4-i2c";
+			reg = <0x48070000 0x100>;
+			interrupts = <0 56 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c1";
@@ -183,6 +207,8 @@
 
 		i2c2: i2c@48072000 {
 			compatible = "ti,omap4-i2c";
+			reg = <0x48072000 0x100>;
+			interrupts = <0 57 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c2";
@@ -190,20 +216,26 @@
 
 		i2c3: i2c@48060000 {
 			compatible = "ti,omap4-i2c";
+			reg = <0x48060000 0x100>;
+			interrupts = <0 61 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c3";
 		};
 
-		i2c4: i2c@4807A000 {
+		i2c4: i2c@4807a000 {
 			compatible = "ti,omap4-i2c";
+			reg = <0x4807a000 0x100>;
+			interrupts = <0 62 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c4";
 		};
 
-		i2c5: i2c@4807C000 {
+		i2c5: i2c@4807c000 {
 			compatible = "ti,omap4-i2c";
+			reg = <0x4807c000 0x100>;
+			interrupts = <0 60 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			ti,hwmods = "i2c5";
@@ -211,42 +243,56 @@
 
 		uart1: serial@4806a000 {
 			compatible = "ti,omap4-uart";
+			reg = <0x4806a000 0x100>;
+			interrupts = <0 72 0x4>;
 			ti,hwmods = "uart1";
 			clock-frequency = <48000000>;
 		};
 
 		uart2: serial@4806c000 {
 			compatible = "ti,omap4-uart";
+			reg = <0x4806c000 0x100>;
+			interrupts = <0 73 0x4>;
 			ti,hwmods = "uart2";
 			clock-frequency = <48000000>;
 		};
 
 		uart3: serial@48020000 {
 			compatible = "ti,omap4-uart";
+			reg = <0x48020000 0x100>;
+			interrupts = <0 74 0x4>;
 			ti,hwmods = "uart3";
 			clock-frequency = <48000000>;
 		};
 
 		uart4: serial@4806e000 {
 			compatible = "ti,omap4-uart";
+			reg = <0x4806e000 0x100>;
+			interrupts = <0 70 0x4>;
 			ti,hwmods = "uart4";
 			clock-frequency = <48000000>;
 		};
 
 		uart5: serial@48066000 {
-			compatible = "ti,omap5-uart";
+			compatible = "ti,omap4-uart";
+			reg = <0x48066000 0x100>;
+			interrupts = <0 105 0x4>;
 			ti,hwmods = "uart5";
 			clock-frequency = <48000000>;
 		};
 
 		uart6: serial@48068000 {
-			compatible = "ti,omap6-uart";
+			compatible = "ti,omap4-uart";
+			reg = <0x48068000 0x100>;
+			interrupts = <0 106 0x4>;
 			ti,hwmods = "uart6";
 			clock-frequency = <48000000>;
 		};
 
 		mmc1: mmc@4809c000 {
 			compatible = "ti,omap4-hsmmc";
+			reg = <0x4809c000 0x400>;
+			interrupts = <0 83 0x4>;
 			ti,hwmods = "mmc1";
 			ti,dual-volt;
 			ti,needs-special-reset;
@@ -254,24 +300,32 @@
 
 		mmc2: mmc@480b4000 {
 			compatible = "ti,omap4-hsmmc";
+			reg = <0x480b4000 0x400>;
+			interrupts = <0 86 0x4>;
 			ti,hwmods = "mmc2";
 			ti,needs-special-reset;
 		};
 
 		mmc3: mmc@480ad000 {
 			compatible = "ti,omap4-hsmmc";
+			reg = <0x480ad000 0x400>;
+			interrupts = <0 94 0x4>;
 			ti,hwmods = "mmc3";
 			ti,needs-special-reset;
 		};
 
 		mmc4: mmc@480d1000 {
 			compatible = "ti,omap4-hsmmc";
+			reg = <0x480d1000 0x400>;
+			interrupts = <0 96 0x4>;
 			ti,hwmods = "mmc4";
 			ti,needs-special-reset;
 		};
 
 		mmc5: mmc@480d5000 {
 			compatible = "ti,omap4-hsmmc";
+			reg = <0x480d5000 0x400>;
+			interrupts = <0 59 0x4>;
 			ti,hwmods = "mmc5";
 			ti,needs-special-reset;
 		};
@@ -287,7 +341,6 @@
 			      <0x49032000 0x7f>; /* L3 Interconnect */
 			reg-names = "mpu", "dma";
 			interrupts = <0 112 0x4>;
-			interrupt-parent = <&gic>;
 			ti,hwmods = "mcpdm";
 		};
 
@@ -297,7 +350,6 @@
 			      <0x4902e000 0x7f>; /* L3 Interconnect */
 			reg-names = "mpu", "dma";
 			interrupts = <0 114 0x4>;
-			interrupt-parent = <&gic>;
 			ti,hwmods = "dmic";
 		};
 
@@ -308,7 +360,6 @@
 			reg-names = "mpu", "dma";
 			interrupts = <0 17 0x4>;
 			interrupt-names = "common";
-			interrupt-parent = <&gic>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp1";
 		};
@@ -320,7 +371,6 @@
 			reg-names = "mpu", "dma";
 			interrupts = <0 22 0x4>;
 			interrupt-names = "common";
-			interrupt-parent = <&gic>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp2";
 		};
@@ -332,9 +382,119 @@
 			reg-names = "mpu", "dma";
 			interrupts = <0 23 0x4>;
 			interrupt-names = "common";
-			interrupt-parent = <&gic>;
 			ti,buffer-size = <128>;
 			ti,hwmods = "mcbsp3";
 		};
+
+		timer1: timer@4ae18000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4ae18000 0x80>;
+			interrupts = <0 37 0x4>;
+			ti,hwmods = "timer1";
+			ti,timer-alwon;
+		};
+
+		timer2: timer@48032000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48032000 0x80>;
+			interrupts = <0 38 0x4>;
+			ti,hwmods = "timer2";
+		};
+
+		timer3: timer@48034000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48034000 0x80>;
+			interrupts = <0 39 0x4>;
+			ti,hwmods = "timer3";
+		};
+
+		timer4: timer@48036000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48036000 0x80>;
+			interrupts = <0 40 0x4>;
+			ti,hwmods = "timer4";
+		};
+
+		timer5: timer@40138000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x40138000 0x80>,
+			      <0x49038000 0x80>;
+			interrupts = <0 41 0x4>;
+			ti,hwmods = "timer5";
+			ti,timer-dsp;
+		};
+
+		timer6: timer@4013a000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4013a000 0x80>,
+			      <0x4903a000 0x80>;
+			interrupts = <0 42 0x4>;
+			ti,hwmods = "timer6";
+			ti,timer-dsp;
+			ti,timer-pwm;
+		};
+
+		timer7: timer@4013c000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4013c000 0x80>,
+			      <0x4903c000 0x80>;
+			interrupts = <0 43 0x4>;
+			ti,hwmods = "timer7";
+			ti,timer-dsp;
+		};
+
+		timer8: timer@4013e000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4013e000 0x80>,
+			      <0x4903e000 0x80>;
+			interrupts = <0 44 0x4>;
+			ti,hwmods = "timer8";
+			ti,timer-dsp;
+			ti,timer-pwm;
+		};
+
+		timer9: timer@4803e000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x4803e000 0x80>;
+			interrupts = <0 45 0x4>;
+			ti,hwmods = "timer9";
+		};
+
+		timer10: timer@48086000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48086000 0x80>;
+			interrupts = <0 46 0x4>;
+			ti,hwmods = "timer10";
+		};
+
+		timer11: timer@48088000 {
+			compatible = "ti,omap2-timer";
+			reg = <0x48088000 0x80>;
+			interrupts = <0 47 0x4>;
+			ti,hwmods = "timer11";
+			ti,timer-pwm;
+		};
+
+		emif1: emif@0x4c000000 {
+			compatible	= "ti,emif-4d5";
+			ti,hwmods	= "emif1";
+			phy-type	= <2>; /* DDR PHY type: Intelli PHY */
+			reg = <0x4c000000 0x400>;
+			interrupts = <0 110 0x4>;
+			hw-caps-read-idle-ctrl;
+			hw-caps-ll-interface;
+			hw-caps-temp-alert;
+		};
+
+		emif2: emif@0x4d000000 {
+			compatible	= "ti,emif-4d5";
+			ti,hwmods	= "emif2";
+			phy-type	= <2>; /* DDR PHY type: Intelli PHY */
+			reg = <0x4d000000 0x400>;
+			interrupts = <0 111 0x4>;
+			hw-caps-read-idle-ctrl;
+			hw-caps-ll-interface;
+			hw-caps-temp-alert;
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/samsung_k3pe0e000b.dtsi b/arch/arm/boot/dts/samsung_k3pe0e000b.dtsi
new file mode 100644
index 000000000000..9657a5cbc3ad
--- /dev/null
+++ b/arch/arm/boot/dts/samsung_k3pe0e000b.dtsi
@@ -0,0 +1,67 @@
+/*
+ * Timings and Geometry for Samsung K3PE0E000B memory part
+ */
+
+/ {
+	samsung_K3PE0E000B: lpddr2 {
+		compatible	= "Samsung,K3PE0E000B","jedec,lpddr2-s4";
+		density		= <4096>;
+		io-width	= <32>;
+
+		tRPab-min-tck	= <3>;
+		tRCD-min-tck	= <3>;
+		tWR-min-tck	= <3>;
+		tRASmin-min-tck	= <3>;
+		tRRD-min-tck	= <2>;
+		tWTR-min-tck	= <2>;
+		tXP-min-tck	= <2>;
+		tRTP-min-tck	= <2>;
+		tCKE-min-tck	= <3>;
+		tCKESR-min-tck	= <3>;
+		tFAW-min-tck	= <8>;
+
+		timings_samsung_K3PE0E000B_533MHz: lpddr2-timings@0 {
+			compatible	= "jedec,lpddr2-timings";
+			min-freq	= <10000000>;
+			max-freq	= <533333333>;
+			tRPab		= <21000>;
+			tRCD		= <18000>;
+			tWR		= <15000>;
+			tRAS-min	= <42000>;
+			tRRD		= <10000>;
+			tWTR		= <7500>;
+			tXP		= <7500>;
+			tRTP		= <7500>;
+			tCKESR		= <15000>;
+			tDQSCK-max	= <5500>;
+			tFAW		= <50000>;
+			tZQCS		= <90000>;
+			tZQCL		= <360000>;
+			tZQinit		= <1000000>;
+			tRAS-max-ns	= <70000>;
+			tDQSCK-max-derated = <6000>;
+		};
+
+		timings_samsung_K3PE0E000B_266MHz: lpddr2-timings@1 {
+			compatible	= "jedec,lpddr2-timings";
+			min-freq	= <10000000>;
+			max-freq	= <266666666>;
+			tRPab		= <21000>;
+			tRCD		= <18000>;
+			tWR		= <15000>;
+			tRAS-min	= <42000>;
+			tRRD		= <10000>;
+			tWTR		= <7500>;
+			tXP		= <7500>;
+			tRTP		= <7500>;
+			tCKESR		= <15000>;
+			tDQSCK-max	= <5500>;
+			tFAW		= <50000>;
+			tZQCS		= <90000>;
+			tZQCL		= <360000>;
+			tZQinit		= <1000000>;
+			tRAS-max-ns	= <70000>;
+			tDQSCK-max-derated = <6000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi
index ff000172c93c..63411b036932 100644
--- a/arch/arm/boot/dts/twl4030.dtsi
+++ b/arch/arm/boot/dts/twl4030.dtsi
@@ -37,6 +37,24 @@
 		regulator-max-microvolt = <3150000>;
 	};
 
+	vusb1v5: regulator-vusb1v5 {
+		compatible = "ti,twl4030-vusb1v5";
+	};
+
+	vusb1v8: regulator-vusb1v8 {
+		compatible = "ti,twl4030-vusb1v8";
+	};
+
+	vusb3v1: regulator-vusb3v1 {
+		compatible = "ti,twl4030-vusb3v1";
+	};
+
+	vsim: regulator-vsim {
+		compatible = "ti,twl4030-vsim";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3000000>;
+	};
+
 	twl_gpio: gpio {
 		compatible = "ti,twl4030-gpio";
 		gpio-controller;
@@ -44,4 +62,13 @@
 		interrupt-controller;
 		#interrupt-cells = <1>;
 	};
+
+	twl4030-usb {
+		compatible = "ti,twl4030-usb";
+		interrupts = <10>, <4>;
+		usb1v5-supply = <&vusb1v5>;
+		usb1v8-supply = <&vusb1v8>;
+		usb3v1-supply = <&vusb3v1>;
+		usb_mode = <1>;
+	};
 };
diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi
index 123e2c40218a..9996cfc5ee80 100644
--- a/arch/arm/boot/dts/twl6030.dtsi
+++ b/arch/arm/boot/dts/twl6030.dtsi
@@ -86,4 +86,9 @@
 	clk32kg: regulator-clk32kg {
 		compatible = "ti,twl6030-clk32kg";
 	};
+
+	twl_usb_comparator: usb-comparator {
+		compatible = "ti,twl6030-usb";
+		interrupts = <4>, <10>;
+	};
 };