Merge 3.13-rc4 into char-misc-next

We want these fixes in here.

32 files changed, 787 insertions, 125 deletions

diff --git a/arch/arm/boot/dts/am335x-base0033.dts b/arch/arm/boot/dts/am335x-base0033.dts
index b4f95c2bbf74..72a9b3fc4251 100644
--- a/arch/arm/boot/dts/am335x-base0033.dts
+++ b/arch/arm/boot/dts/am335x-base0033.dts
@@ -13,4 +13,83 @@
 / {
 	model = "IGEP COM AM335x on AQUILA Expansion";
 	compatible = "isee,am335x-base0033", "isee,am335x-igep0033", "ti,am33xx";
+
+	hdmi {
+		compatible = "ti,tilcdc,slave";
+		i2c = <&i2c0>;
+		pinctrl-names = "default", "off";
+		pinctrl-0 = <&nxp_hdmi_pins>;
+		pinctrl-1 = <&nxp_hdmi_off_pins>;
+		status = "okay";
+	};
+
+	leds_base {
+		pinctrl-names = "default";
+		pinctrl-0 = <&leds_base_pins>;
+
+		compatible = "gpio-leds";
+
+		led@0 {
+			label = "base:red:user";
+			gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;	/* gpio1_21 */
+			default-state = "off";
+		};
+
+		led@1 {
+			label = "base:green:user";
+			gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;	/* gpio2_0 */
+			default-state = "off";
+		};
+	};
+};
+
+&am33xx_pinmux {
+	nxp_hdmi_pins: pinmux_nxp_hdmi_pins {
+		pinctrl-single,pins = <
+			0x1b0 (PIN_OUTPUT | MUX_MODE3)	/* xdma_event_intr0.clkout1 */
+			0xa0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data0 */
+			0xa4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data1 */
+			0xa8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data2 */
+			0xac (PIN_OUTPUT | MUX_MODE0)	/* lcd_data3 */
+			0xb0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data4 */
+			0xb4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data5 */
+			0xb8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data6 */
+			0xbc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data7 */
+			0xc0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data8 */
+			0xc4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data9 */
+			0xc8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data10 */
+			0xcc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data11 */
+			0xd0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data12 */
+			0xd4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data13 */
+			0xd8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_data14 */
+			0xdc (PIN_OUTPUT | MUX_MODE0)	/* lcd_data15 */
+			0xe0 (PIN_OUTPUT | MUX_MODE0)	/* lcd_vsync */
+			0xe4 (PIN_OUTPUT | MUX_MODE0)	/* lcd_hsync */
+			0xe8 (PIN_OUTPUT | MUX_MODE0)	/* lcd_pclk */
+			0xec (PIN_OUTPUT | MUX_MODE0)	/* lcd_ac_bias_en */
+		>;
+	};
+	nxp_hdmi_off_pins: pinmux_nxp_hdmi_off_pins {
+		pinctrl-single,pins = <
+			0x1b0 (PIN_OUTPUT | MUX_MODE3)	/* xdma_event_intr0.clkout1 */
+		>;
+	};
+
+	leds_base_pins: pinmux_leds_base_pins {
+		pinctrl-single,pins = <
+			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
+			0x88 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_csn3.gpio2_0 */
+		>;
+	};
+};
+
+&lcdc {
+	status = "okay";
+};
+
+&i2c0 {
+	eeprom: eeprom@50 {
+		compatible = "at,24c256";
+		reg = <0x50>;
+	};
 };
diff --git a/arch/arm/boot/dts/am335x-igep0033.dtsi b/arch/arm/boot/dts/am335x-igep0033.dtsi
index 619624479311..7063311a58d9 100644
--- a/arch/arm/boot/dts/am335x-igep0033.dtsi
+++ b/arch/arm/boot/dts/am335x-igep0033.dtsi
@@ -199,6 +199,35 @@
 	pinctrl-0 = <&uart0_pins>;
 };
 
+&usb {
+	status = "okay";
+
+	control@44e10000 {
+		status = "okay";
+	};
+
+	usb-phy@47401300 {
+		status = "okay";
+	};
+
+	usb-phy@47401b00 {
+		status = "okay";
+	};
+
+	usb@47401000 {
+		status = "okay";
+	};
+
+	usb@47401800 {
+		status = "okay";
+		dr_mode = "host";
+	};
+
+	dma-controller@07402000  {
+		status = "okay";
+	};
+};
+
 #include "tps65910.dtsi"
 
 &tps {
diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts
index e99dfaf70052..03fcbf0a88a8 100644
--- a/arch/arm/boot/dts/am3517-evm.dts
+++ b/arch/arm/boot/dts/am3517-evm.dts
@@ -7,11 +7,11 @@
  */
 /dts-v1/;
 
-#include "omap34xx.dtsi"
+#include "am3517.dtsi"
 
 / {
-	model = "TI AM3517 EVM (AM3517/05)";
-	compatible = "ti,am3517-evm", "ti,omap3";
+	model = "TI AM3517 EVM (AM3517/05 TMDSEVM3517)";
+	compatible = "ti,am3517-evm", "ti,am3517", "ti,omap3";
 
 	memory {
 		device_type = "memory";
diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi
new file mode 100644
index 000000000000..2fbe02faa8b1
--- /dev/null
+++ b/arch/arm/boot/dts/am3517.dtsi
@@ -0,0 +1,63 @@
+/*
+ * Device Tree Source for am3517 SoC
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include "omap3.dtsi"
+
+/ {
+	aliases {
+		serial3 = &uart4;
+	};
+
+	ocp {
+		am35x_otg_hs: am35x_otg_hs@5c040000 {
+			compatible = "ti,omap3-musb";
+			ti,hwmods = "am35x_otg_hs";
+			status = "disabled";
+			reg = <0x5c040000 0x1000>;
+			interrupts = <71>;
+			interrupt-names = "mc";
+		};
+
+		davinci_emac: ethernet@0x5c000000 {
+			compatible = "ti,am3517-emac";
+			ti,hwmods = "davinci_emac";
+			status = "disabled";
+			reg = <0x5c000000 0x30000>;
+			interrupts = <67 68 69 70>;
+			ti,davinci-ctrl-reg-offset = <0x10000>;
+			ti,davinci-ctrl-mod-reg-offset = <0>;
+			ti,davinci-ctrl-ram-offset = <0x20000>;
+			ti,davinci-ctrl-ram-size = <0x2000>;
+			ti,davinci-rmii-en = /bits/ 8 <1>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+		};
+
+		davinci_mdio: ethernet@0x5c030000 {
+			compatible = "ti,davinci_mdio";
+			ti,hwmods = "davinci_mdio";
+			status = "disabled";
+			reg = <0x5c030000 0x1000>;
+			bus_freq = <1000000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		uart4: serial@4809e000 {
+			compatible = "ti,omap3-uart";
+			ti,hwmods = "uart4";
+			status = "disabled";
+			reg = <0x4809e000 0x400>;
+			interrupts = <84>;
+			dmas = <&sdma 55 &sdma 54>;
+			dma-names = "tx", "rx";
+			clock-frequency = <48000000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts
index 90ce29dbe119..08a56bcfc724 100644
--- a/arch/arm/boot/dts/armada-370-db.dts
+++ b/arch/arm/boot/dts/armada-370-db.dts
@@ -99,22 +99,22 @@
 					spi-max-frequency = <50000000>;
 				};
 			};
+		};
 
-			pcie-controller {
+		pcie-controller {
+			status = "okay";
+			/*
+			 * The two PCIe units are accessible through
+			 * both standard PCIe slots and mini-PCIe
+			 * slots on the board.
+			 */
+			pcie@1,0 {
+				/* Port 0, Lane 0 */
+				status = "okay";
+			};
+			pcie@2,0 {
+				/* Port 1, Lane 0 */
 				status = "okay";
-				/*
-				 * The two PCIe units are accessible through
-				 * both standard PCIe slots and mini-PCIe
-				 * slots on the board.
-				 */
-				pcie@1,0 {
-					/* Port 0, Lane 0 */
-					status = "okay";
-				};
-				pcie@2,0 {
-					/* Port 1, Lane 0 */
-					status = "okay";
-				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index 00d6a798c705..7f10f627ae5b 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -118,7 +118,7 @@
 
 			coherency-fabric@20200 {
 				compatible = "marvell,coherency-fabric";
-				reg = <0x20200 0xb0>, <0x21810 0x1c>;
+				reg = <0x20200 0xb0>, <0x21010 0x1c>;
 			};
 
 			serial@12000 {
diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
index 3f5e6121c730..98335fb34b7a 100644
--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
@@ -47,7 +47,7 @@
 		/*
 		 * MV78230 has 2 PCIe units Gen2.0: One unit can be
 		 * configured as x4 or quad x1 lanes. One unit is
-		 * x4/x1.
+		 * x1 only.
 		 */
 		pcie-controller {
 			compatible = "marvell,armada-xp-pcie";
@@ -62,10 +62,10 @@
 
 			ranges =
 			       <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000   /* Port 0.0 registers */
-				0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000   /* Port 2.0 registers */
 				0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000   /* Port 0.1 registers */
 				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
 				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
+				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
 				0x82000000 0x1 0       MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
 				0x81000000 0x1 0       MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
 				0x82000000 0x2 0       MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
@@ -74,8 +74,8 @@
 				0x81000000 0x3 0       MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
 				0x82000000 0x4 0       MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
 				0x81000000 0x4 0       MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
-				0x82000000 0x9 0       MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
-				0x81000000 0x9 0       MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */>;
+				0x82000000 0x5 0       MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+				0x81000000 0x5 0       MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */>;
 
 			pcie@1,0 {
 				device_type = "pci";
@@ -145,20 +145,20 @@
 				status = "disabled";
 			};
 
-			pcie@9,0 {
+			pcie@5,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
-				reg = <0x4800 0 0 0 0>;
+				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				reg = <0x2800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
 				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
-					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
+				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
+					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
 				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 99>;
-				marvell,pcie-port = <2>;
+				interrupt-map = <0 0 0 0 &mpic 62>;
+				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 26>;
+				clocks = <&gateclk 9>;
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
index 3e9fd1353f89..66609684d41b 100644
--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
@@ -48,7 +48,7 @@
 		/*
 		 * MV78260 has 3 PCIe units Gen2.0: Two units can be
 		 * configured as x4 or quad x1 lanes. One unit is
-		 * x4/x1.
+		 * x4 only.
 		 */
 		pcie-controller {
 			compatible = "marvell,armada-xp-pcie";
@@ -68,7 +68,9 @@
 				0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000   /* Port 0.2 registers */
 				0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000   /* Port 0.3 registers */
 				0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000   /* Port 1.0 registers */
-				0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000   /* Port 3.0 registers */
+				0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000   /* Port 1.1 registers */
+				0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000   /* Port 1.2 registers */
+				0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000   /* Port 1.3 registers */
 				0x82000000 0x1 0     MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
 				0x81000000 0x1 0     MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO  */
 				0x82000000 0x2 0     MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
@@ -77,10 +79,18 @@
 				0x81000000 0x3 0     MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO  */
 				0x82000000 0x4 0     MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
 				0x81000000 0x4 0     MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO  */
-				0x82000000 0x9 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
-				0x81000000 0x9 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
-				0x82000000 0xa 0     MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
-				0x81000000 0xa 0     MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO  */>;
+
+				0x82000000 0x5 0     MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
+				0x81000000 0x5 0     MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO  */
+				0x82000000 0x6 0     MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
+				0x81000000 0x6 0     MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO  */
+				0x82000000 0x7 0     MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
+				0x81000000 0x7 0     MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO  */
+				0x82000000 0x8 0     MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
+				0x81000000 0x8 0     MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO  */
+
+				0x82000000 0x9 0     MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
+				0x81000000 0x9 0     MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO  */>;
 
 			pcie@1,0 {
 				device_type = "pci";
@@ -106,8 +116,8 @@
 				#address-cells = <3>;
 				#size-cells = <2>;
 				#interrupt-cells = <1>;
-                                ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-                                          0x81000000 0 0 0x81000000 0x2 0 1 0>;
+				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
+					  0x81000000 0 0 0x81000000 0x2 0 1 0>;
 				interrupt-map-mask = <0 0 0 0>;
 				interrupt-map = <0 0 0 0 &mpic 59>;
 				marvell,pcie-port = <0>;
@@ -150,37 +160,88 @@
 				status = "disabled";
 			};
 
-			pcie@9,0 {
+			pcie@5,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
-				reg = <0x4800 0 0 0 0>;
+				assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+				reg = <0x2800 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
 				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
-					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
+				ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
+					  0x81000000 0 0 0x81000000 0x5 0 1 0>;
 				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 99>;
-				marvell,pcie-port = <2>;
+				interrupt-map = <0 0 0 0 &mpic 62>;
+				marvell,pcie-port = <1>;
 				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 26>;
+				clocks = <&gateclk 9>;
 				status = "disabled";
 			};
 
-			pcie@10,0 {
+			pcie@6,0 {
 				device_type = "pci";
-				assigned-addresses = <0x82000800 0 0x82000 0 0x2000>;
-				reg = <0x5000 0 0 0 0>;
+				assigned-addresses = <0x82000800 0 0x84000 0 0x2000>;
+				reg = <0x3000 0 0 0 0>;
 				#address-cells = <3>;
 				#size-cells = <2>;
 				#interrupt-cells = <1>;
-				ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
-					  0x81000000 0 0 0x81000000 0xa 0 1 0>;
+				ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
+					  0x81000000 0 0 0x81000000 0x6 0 1 0>;
 				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &mpic 103>;
-				marvell,pcie-port = <3>;
+				interrupt-map = <0 0 0 0 &mpic 63>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <1>;
+				clocks = <&gateclk 10>;
+				status = "disabled";
+			};
+
+			pcie@7,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x88000 0 0x2000>;
+				reg = <0x3800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
+					  0x81000000 0 0 0x81000000 0x7 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 64>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <2>;
+				clocks = <&gateclk 11>;
+				status = "disabled";
+			};
+
+			pcie@8,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>;
+				reg = <0x4000 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
+					  0x81000000 0 0 0x81000000 0x8 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 65>;
+				marvell,pcie-port = <1>;
+				marvell,pcie-lane = <3>;
+				clocks = <&gateclk 12>;
+				status = "disabled";
+			};
+
+			pcie@9,0 {
+				device_type = "pci";
+				assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
+				reg = <0x4800 0 0 0 0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				#interrupt-cells = <1>;
+				ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
+					  0x81000000 0 0 0x81000000 0x9 0 1 0>;
+				interrupt-map-mask = <0 0 0 0>;
+				interrupt-map = <0 0 0 0 &mpic 99>;
+				marvell,pcie-port = <2>;
 				marvell,pcie-lane = <0>;
-				clocks = <&gateclk 27>;
+				clocks = <&gateclk 26>;
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
index 2347e9563cef..6801106fa1f8 100644
--- a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
@@ -11,6 +11,10 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 
 / {
+	aliases {
+		serial4 = &usart3;
+	};
+
 	ahb {
 		apb {
 			pinctrl@fffff400 {
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index 1e12aeff403b..aa537ed13f0a 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -85,6 +85,8 @@
 			reg = <0x7e205000 0x1000>;
 			interrupts = <2 21>;
 			clocks = <&clk_i2c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 			status = "disabled";
 		};
 
@@ -93,6 +95,8 @@
 			reg = <0x7e804000 0x1000>;
 			interrupts = <2 21>;
 			clocks = <&clk_i2c>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/cros5250-common.dtsi
index dc259e8b8a73..9b186ac06c8b 100644
--- a/arch/arm/boot/dts/cros5250-common.dtsi
+++ b/arch/arm/boot/dts/cros5250-common.dtsi
@@ -27,6 +27,13 @@
 		i2c2_bus: i2c2-bus {
 			samsung,pin-pud = <0>;
 		};
+
+		max77686_irq: max77686-irq {
+			samsung,pins = "gpx3-2";
+			samsung,pin-function = <0>;
+			samsung,pin-pud = <0>;
+			samsung,pin-drv = <0>;
+		};
 	};
 
 	i2c@12C60000 {
@@ -35,6 +42,11 @@
 
 		max77686@09 {
 			compatible = "maxim,max77686";
+			interrupt-parent = <&gpx3>;
+			interrupts = <2 0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&max77686_irq>;
+			wakeup-source;
 			reg = <0x09>;
 
 			voltage-regulators {
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 59154dc15fe4..fb28b2ecb1db 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -161,7 +161,7 @@
 					clocks = <&clks 197>, <&clks 3>,
 						 <&clks 197>, <&clks 107>,
 						 <&clks 0>,   <&clks 118>,
-						 <&clks 62>,  <&clks 139>,
+						 <&clks 0>,  <&clks 139>,
 						 <&clks 0>;
 					clock-names = "core",  "rxtx0",
 						      "rxtx1", "rxtx2",
diff --git a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
index 9c18adf788f7..f577b7df9a29 100644
--- a/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
+++ b/arch/arm/boot/dts/omap-gpmc-smsc911x.dtsi
@@ -44,8 +44,8 @@
 		gpmc,wr-access-ns = <186>;
 		gpmc,cycle2cycle-samecsen;
 		gpmc,cycle2cycle-diffcsen;
-		vmmc-supply = <&vddvario>;
-		vmmc_aux-supply = <&vdd33a>;
+		vddvario-supply = <&vddvario>;
+		vdd33a-supply = <&vdd33a>;
 		reg-io-width = <4>;
 		smsc,save-mac-address;
 	};
diff --git a/arch/arm/boot/dts/omap-zoom-common.dtsi b/arch/arm/boot/dts/omap-zoom-common.dtsi
index b0ee342598f0..68221fab978d 100644
--- a/arch/arm/boot/dts/omap-zoom-common.dtsi
+++ b/arch/arm/boot/dts/omap-zoom-common.dtsi
@@ -13,7 +13,7 @@
 	 * they probably share the same GPIO IRQ
 	 * REVISIT: Add timing support from slls644g.pdf
 	 */
-	8250@3,0 {
+	uart@3,0 {
 		compatible = "ns16550a";
 		reg = <3 0 0x100>;
 		bank-width = <2>;
diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi
index a2bfcde858a6..d0c5b37e248c 100644
--- a/arch/arm/boot/dts/omap2.dtsi
+++ b/arch/arm/boot/dts/omap2.dtsi
@@ -9,6 +9,7 @@
  */
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/omap.h>
 
 #include "skeleton.dtsi"
@@ -21,6 +22,8 @@
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
+		i2c0 = &i2c1;
+		i2c1 = &i2c2;
 	};
 
 	cpus {
@@ -53,6 +56,28 @@
 		ranges;
 		ti,hwmods = "l3_main";
 
+		aes: aes@480a6000 {
+			compatible = "ti,omap2-aes";
+			ti,hwmods = "aes";
+			reg = <0x480a6000 0x50>;
+			dmas = <&sdma 9 &sdma 10>;
+			dma-names = "tx", "rx";
+		};
+
+		hdq1w: 1w@480b2000 {
+			compatible = "ti,omap2420-1w";
+			ti,hwmods = "hdq1w";
+			reg = <0x480b2000 0x1000>;
+			interrupts = <58>;
+		};
+
+		mailbox: mailbox@48094000 {
+			compatible = "ti,omap2-mailbox";
+			ti,hwmods = "mailbox";
+			reg = <0x48094000 0x200>;
+			interrupts = <26>;
+		};
+
 		intc: interrupt-controller@1 {
 			compatible = "ti,omap2-intc";
 			interrupt-controller;
@@ -63,6 +88,7 @@
 
 		sdma: dma-controller@48056000 {
 			compatible = "ti,omap2430-sdma", "ti,omap2420-sdma";
+			ti,hwmods = "dma";
 			reg = <0x48056000 0x1000>;
 			interrupts = <12>,
 				     <13>,
@@ -73,21 +99,91 @@
 			#dma-requests = <64>;
 		};
 
+		i2c1: i2c@48070000 {
+			compatible = "ti,omap2-i2c";
+			ti,hwmods = "i2c1";
+			reg = <0x48070000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <56>;
+			dmas = <&sdma 27 &sdma 28>;
+			dma-names = "tx", "rx";
+		};
+
+		i2c2: i2c@48072000 {
+			compatible = "ti,omap2-i2c";
+			ti,hwmods = "i2c2";
+			reg = <0x48072000 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <57>;
+			dmas = <&sdma 29 &sdma 30>;
+			dma-names = "tx", "rx";
+		};
+
+		mcspi1: mcspi@48098000 {
+			compatible = "ti,omap2-mcspi";
+			ti,hwmods = "mcspi1";
+			reg = <0x48098000 0x100>;
+			interrupts = <65>;
+			dmas = <&sdma 35 &sdma 36 &sdma 37 &sdma 38
+				&sdma 39 &sdma 40 &sdma 41 &sdma 42>;
+			dma-names = "tx0", "rx0", "tx1", "rx1",
+				    "tx2", "rx2", "tx3", "rx3";
+		};
+
+		mcspi2: mcspi@4809a000 {
+			compatible = "ti,omap2-mcspi";
+			ti,hwmods = "mcspi2";
+			reg = <0x4809a000 0x100>;
+			interrupts = <66>;
+			dmas = <&sdma 43 &sdma 44 &sdma 45 &sdma 46>;
+			dma-names = "tx0", "rx0", "tx1", "rx1";
+		};
+
+		rng: rng@480a0000 {
+			compatible = "ti,omap2-rng";
+			ti,hwmods = "rng";
+			reg = <0x480a0000 0x50>;
+			interrupts = <36>;
+		};
+
+		sham: sham@480a4000 {
+			compatible = "ti,omap2-sham";
+			ti,hwmods = "sham";
+			reg = <0x480a4000 0x64>;
+			interrupts = <51>;
+			dmas = <&sdma 13>;
+			dma-names = "rx";
+		};
+
 		uart1: serial@4806a000 {
 			compatible = "ti,omap2-uart";
 			ti,hwmods = "uart1";
+			reg = <0x4806a000 0x2000>;
+			interrupts = <72>;
+			dmas = <&sdma 49 &sdma 50>;
+			dma-names = "tx", "rx";
 			clock-frequency = <48000000>;
 		};
 
 		uart2: serial@4806c000 {
 			compatible = "ti,omap2-uart";
 			ti,hwmods = "uart2";
+			reg = <0x4806c000 0x400>;
+			interrupts = <73>;
+			dmas = <&sdma 51 &sdma 52>;
+			dma-names = "tx", "rx";
 			clock-frequency = <48000000>;
 		};
 
 		uart3: serial@4806e000 {
 			compatible = "ti,omap2-uart";
 			ti,hwmods = "uart3";
+			reg = <0x4806e000 0x400>;
+			interrupts = <74>;
+			dmas = <&sdma 53 &sdma 54>;
+			dma-names = "tx", "rx";
 			clock-frequency = <48000000>;
 		};
 
diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi
index c8f9c55169ea..60c605de22dd 100644
--- a/arch/arm/boot/dts/omap2420.dtsi
+++ b/arch/arm/boot/dts/omap2420.dtsi
@@ -114,6 +114,15 @@
 			dma-names = "tx", "rx";
 		};
 
+		msdi1: mmc@4809c000 {
+			compatible = "ti,omap2420-mmc";
+			ti,hwmods = "msdi1";
+			reg = <0x4809c000 0x80>;
+			interrupts = <83>;
+			dmas = <&sdma 61 &sdma 62>;
+			dma-names = "tx", "rx";
+		};
+
 		timer1: timer@48028000 {
 			compatible = "ti,omap2420-timer";
 			reg = <0x48028000 0x400>;
@@ -121,5 +130,19 @@
 			ti,hwmods = "timer1";
 			ti,timer-alwon;
 		};
+
+		wd_timer2: wdt@48022000 {
+			compatible = "ti,omap2-wdt";
+			ti,hwmods = "wd_timer2";
+			reg = <0x48022000 0x80>;
+		};
 	};
 };
+
+&i2c1 {
+	compatible = "ti,omap2420-i2c";
+};
+
+&i2c2 {
+	compatible = "ti,omap2420-i2c";
+};
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
index c535a5a2b27f..d624345666f5 100644
--- a/arch/arm/boot/dts/omap2430.dtsi
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -175,6 +175,25 @@
 			dma-names = "tx", "rx";
 		};
 
+		mmc1: mmc@4809c000 {
+			compatible = "ti,omap2-hsmmc";
+			reg = <0x4809c000 0x200>;
+			interrupts = <83>;
+			ti,hwmods = "mmc1";
+			ti,dual-volt;
+			dmas = <&sdma 61>, <&sdma 62>;
+			dma-names = "tx", "rx";
+		};
+
+		mmc2: mmc@480b4000 {
+			compatible = "ti,omap2-hsmmc";
+			reg = <0x480b4000 0x200>;
+			interrupts = <86>;
+			ti,hwmods = "mmc2";
+			dmas = <&sdma 47>, <&sdma 48>;
+			dma-names = "tx", "rx";
+		};
+
 		timer1: timer@49018000 {
 			compatible = "ti,omap2420-timer";
 			reg = <0x49018000 0x400>;
@@ -182,5 +201,35 @@
 			ti,hwmods = "timer1";
 			ti,timer-alwon;
 		};
+
+		mcspi3: mcspi@480b8000 {
+			compatible = "ti,omap2-mcspi";
+			ti,hwmods = "mcspi3";
+			reg = <0x480b8000 0x100>;
+			interrupts = <91>;
+			dmas = <&sdma 15 &sdma 16 &sdma 23 &sdma 24>;
+			dma-names = "tx0", "rx0", "tx1", "rx1";
+		};
+
+		usb_otg_hs: usb_otg_hs@480ac000 {
+			compatible = "ti,omap2-musb";
+			ti,hwmods = "usb_otg_hs";
+			reg = <0x480ac000 0x1000>;
+			interrupts = <93>;
+		};
+
+		wd_timer2: wdt@49016000 {
+			compatible = "ti,omap2-wdt";
+			ti,hwmods = "wd_timer2";
+			reg = <0x49016000 0x80>;
+		};
 	};
 };
+
+&i2c1 {
+	compatible = "ti,omap2430-i2c";
+};
+
+&i2c2 {
+	compatible = "ti,omap2430-i2c";
+};
diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts
index 31a632f7effb..df33a50bc070 100644
--- a/arch/arm/boot/dts/omap3-beagle-xm.dts
+++ b/arch/arm/boot/dts/omap3-beagle-xm.dts
@@ -215,3 +215,10 @@
 &usbhsehci {
 	phys = <0 &hsusb2_phy>;
 };
+
+&vaux2 {
+	regulator-name = "usb_1v8";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts
index fa532aaacc68..3ba4a625ea5b 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -61,6 +61,14 @@
 		vcc-supply = <&hsusb2_power>;
 	};
 
+	sound {
+		compatible = "ti,omap-twl4030";
+		ti,model = "omap3beagle";
+
+		ti,mcbsp = <&mcbsp2>;
+		ti,codec = <&twl_audio>;
+	};
+
 	gpio_keys {
 		compatible = "gpio-keys";
 
@@ -120,6 +128,12 @@
 		reg = <0x48>;
 		interrupts = <7>; /* SYS_NIRQ cascaded to intc */
 		interrupt-parent = <&intc>;
+
+		twl_audio: audio {
+			compatible = "ti,twl4030-audio";
+			codec {
+			};
+		};
 	};
 };
 
@@ -178,3 +192,10 @@
 	mode = <3>;
 	power = <50>;
 };
+
+&vaux2 {
+	regulator-name = "vdd_ehci";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+};
diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi
index ba1e58b7b7e3..165aaf7591ba 100644
--- a/arch/arm/boot/dts/omap3-igep.dtsi
+++ b/arch/arm/boot/dts/omap3-igep.dtsi
@@ -1,5 +1,5 @@
 /*
- * Device Tree Source for IGEP Technology devices
+ * Common device tree for IGEP boards based on AM/DM37x
  *
  * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
  * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
@@ -10,7 +10,7 @@
  */
 /dts-v1/;
 
-#include "omap34xx.dtsi"
+#include "omap36xx.dtsi"
 
 / {
 	memory {
@@ -24,6 +24,25 @@
 		ti,mcbsp = <&mcbsp2>;
 		ti,codec = <&twl_audio>;
 	};
+
+	vdd33: regulator-vdd33 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd33";
+		regulator-always-on;
+	};
+
+	lbee1usjyc_vmmc: lbee1usjyc_vmmc {
+		pinctrl-names = "default";
+		pinctrl-0 = <&lbee1usjyc_pins>;
+		compatible = "regulator-fixed";
+		regulator-name = "regulator-lbee1usjyc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>;	/* gpio_138 WIFI_PDN */
+		startup-delay-us = <10000>;
+		enable-active-high;
+		vin-supply = <&vdd33>;
+	};
 };
 
 &omap3_pmx_core {
@@ -48,6 +67,15 @@
 		>;
 	};
 
+	/* WiFi/BT combo */
+	lbee1usjyc_pins: pinmux_lbee1usjyc_pins {
+		pinctrl-single,pins = <
+			0x136 (PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat5.gpio_137 */
+			0x138 (PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat6.gpio_138 */
+			0x13a (PIN_OUTPUT | MUX_MODE4)	/* sdmmc2_dat7.gpio_139 */
+		>;
+	};
+
 	mcbsp2_pins: pinmux_mcbsp2_pins {
 		pinctrl-single,pins = <
 			0x10c (PIN_INPUT | MUX_MODE0)		/* mcbsp2_fsx.mcbsp2_fsx */
@@ -65,10 +93,17 @@
 			0x11a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
 			0x11c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
 			0x11e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
-			0x120 (PIN_INPUT | MUX_MODE0)		/* sdmmc1_dat4.sdmmc1_dat4 */
-			0x122 (PIN_INPUT | MUX_MODE0)		/* sdmmc1_dat5.sdmmc1_dat5 */
-			0x124 (PIN_INPUT | MUX_MODE0)		/* sdmmc1_dat6.sdmmc1_dat6 */
-			0x126 (PIN_INPUT | MUX_MODE0)		/* sdmmc1_dat7.sdmmc1_dat7 */
+		>;
+	};
+
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk.sdmmc2_clk */
+			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd.sdmmc2_cmd */
+			0x12c (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc2_dat0.sdmmc2_dat0 */
+			0x12e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1.sdmmc2_dat1 */
+			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2.sdmmc2_dat2 */
+			0x132 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3.sdmmc2_dat3 */
 		>;
 	};
 
@@ -78,10 +113,33 @@
 		>;
 	};
 
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			0x18a (PIN_INPUT | MUX_MODE0)   /* i2c1_scl.i2c1_scl */
+			0x18c (PIN_INPUT | MUX_MODE0)   /* i2c1_sda.i2c1_sda */
+		>;
+	};
+
+	i2c2_pins: pinmux_i2c2_pins {
+		pinctrl-single,pins = <
+			0x18e (PIN_INPUT | MUX_MODE0)   /* i2c2_scl.i2c2_scl */
+			0x190 (PIN_INPUT | MUX_MODE0)   /* i2c2_sda.i2c2_sda */
+		>;
+	};
+
+	i2c3_pins: pinmux_i2c3_pins {
+		pinctrl-single,pins = <
+			0x192 (PIN_INPUT | MUX_MODE0)   /* i2c3_scl.i2c3_scl */
+			0x194 (PIN_INPUT | MUX_MODE0)   /* i2c3_sda.i2c3_sda */
+		>;
+	};
+
 	leds_pins: pinmux_leds_pins { };
 };
 
 &i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
 	clock-frequency = <2600000>;
 
 	twl: twl@48 {
@@ -101,9 +159,16 @@
 #include "twl4030_omap3.dtsi"
 
 &i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
 	clock-frequency = <400000>;
 };
 
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3_pins>;
+};
+
 &mcbsp2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcbsp2_pins>;
@@ -114,11 +179,15 @@
       pinctrl-0 = <&mmc1_pins>;
       vmmc-supply = <&vmmc1>;
       vmmc_aux-supply = <&vsim>;
-      bus-width = <8>;
+      bus-width = <4>;
 };
 
 &mmc2 {
-	status = "disabled";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&lbee1usjyc_vmmc>;
+	bus-width = <4>;
+	non-removable;
 };
 
 &mmc3 {
diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts
index d5cc79267250..1c7e74d2d2bc 100644
--- a/arch/arm/boot/dts/omap3-igep0020.dts
+++ b/arch/arm/boot/dts/omap3-igep0020.dts
@@ -1,5 +1,5 @@
 /*
- * Device Tree Source for IGEPv2 board
+ * Device Tree Source for IGEPv2 Rev. (TI OMAP AM/DM37x)
  *
  * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
  * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
@@ -13,7 +13,7 @@
 #include "omap-gpmc-smsc911x.dtsi"
 
 / {
-	model = "IGEPv2";
+	model = "IGEPv2 (TI OMAP AM/DM37x)";
 	compatible = "isee,omap3-igep0020", "ti,omap3";
 
 	leds {
@@ -67,6 +67,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <
 		&hsusbb1_pins
+		&tfp410_pins
+		&dss_pins
 	>;
 
 	hsusbb1_pins: pinmux_hsusbb1_pins {
@@ -85,6 +87,45 @@
 			0x5ba (PIN_INPUT_PULLDOWN | MUX_MODE3)	/* etk_d7.hsusb1_data3 */
 		>;
 	};
+
+	tfp410_pins: tfp410_dvi_pins {
+		pinctrl-single,pins = <
+			0x196 (PIN_OUTPUT | MUX_MODE4)   /* hdq_sio.gpio_170 */
+		>;
+	};
+
+	dss_pins: pinmux_dss_dvi_pins {
+		pinctrl-single,pins = <
+			0x0a4 (PIN_OUTPUT | MUX_MODE0)   /* dss_pclk.dss_pclk */
+			0x0a6 (PIN_OUTPUT | MUX_MODE0)   /* dss_hsync.dss_hsync */
+			0x0a8 (PIN_OUTPUT | MUX_MODE0)   /* dss_vsync.dss_vsync */
+			0x0aa (PIN_OUTPUT | MUX_MODE0)   /* dss_acbias.dss_acbias */
+			0x0ac (PIN_OUTPUT | MUX_MODE0)   /* dss_data0.dss_data0 */
+			0x0ae (PIN_OUTPUT | MUX_MODE0)   /* dss_data1.dss_data1 */
+			0x0b0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data2.dss_data2 */
+			0x0b2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data3.dss_data3 */
+			0x0b4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data4.dss_data4 */
+			0x0b6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data5.dss_data5 */
+			0x0b8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data6.dss_data6 */
+			0x0ba (PIN_OUTPUT | MUX_MODE0)   /* dss_data7.dss_data7 */
+			0x0bc (PIN_OUTPUT | MUX_MODE0)   /* dss_data8.dss_data8 */
+			0x0be (PIN_OUTPUT | MUX_MODE0)   /* dss_data9.dss_data9 */
+			0x0c0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data10.dss_data10 */
+			0x0c2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data11.dss_data11 */
+			0x0c4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data12.dss_data12 */
+			0x0c6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data13.dss_data13 */
+			0x0c8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data14.dss_data14 */
+			0x0ca (PIN_OUTPUT | MUX_MODE0)   /* dss_data15.dss_data15 */
+			0x0cc (PIN_OUTPUT | MUX_MODE0)   /* dss_data16.dss_data16 */
+			0x0ce (PIN_OUTPUT | MUX_MODE0)   /* dss_data17.dss_data17 */
+			0x0d0 (PIN_OUTPUT | MUX_MODE0)   /* dss_data18.dss_data18 */
+			0x0d2 (PIN_OUTPUT | MUX_MODE0)   /* dss_data19.dss_data19 */
+			0x0d4 (PIN_OUTPUT | MUX_MODE0)   /* dss_data20.dss_data20 */
+			0x0d6 (PIN_OUTPUT | MUX_MODE0)   /* dss_data21.dss_data21 */
+			0x0d8 (PIN_OUTPUT | MUX_MODE0)   /* dss_data22.dss_data22 */
+			0x0da (PIN_OUTPUT | MUX_MODE0)   /* dss_data23.dss_data23 */
+		>;
+	};
 };
 
 &leds_pins {
@@ -174,3 +215,8 @@
 &usbhsehci {
 	phys = <&hsusb1_phy>;
 };
+
+&vpll2 {
+        /* Needed for DSS */
+        regulator-name = "vdds_dsi";
+};
diff --git a/arch/arm/boot/dts/omap3-igep0030.dts b/arch/arm/boot/dts/omap3-igep0030.dts
index 525e6d9b0978..02a23f8a3384 100644
--- a/arch/arm/boot/dts/omap3-igep0030.dts
+++ b/arch/arm/boot/dts/omap3-igep0030.dts
@@ -1,5 +1,5 @@
 /*
- * Device Tree Source for IGEP COM Module
+ * Device Tree Source for IGEP COM MODULE (TI OMAP AM/DM37x)
  *
  * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
  * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
@@ -12,7 +12,7 @@
 #include "omap3-igep.dtsi"
 
 / {
-	model = "IGEP COM Module";
+	model = "IGEP COM MODULE (TI OMAP AM/DM37x)";
 	compatible = "isee,omap3-igep0030", "ti,omap3";
 
 	leds {
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index c4f20bfe4cce..6fc85f963530 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -9,7 +9,7 @@
 
 /dts-v1/;
 
-#include "omap34xx.dtsi"
+#include "omap34xx-hs.dtsi"
 
 / {
 	model = "Nokia N900";
@@ -125,6 +125,21 @@
 		>;
 	};
 
+	mmc2_pins: pinmux_mmc2_pins {
+		pinctrl-single,pins = <
+			0x128 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_clk */
+			0x12a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_cmd */
+			0x12c (PIN_INPUT_PULLUP | MUX_MODE0) 	/* sdmmc2_dat0 */
+			0x12e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat1 */
+			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat2 */
+			0x132 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat3 */
+			0x134 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat4 */
+			0x136 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat5 */
+			0x138 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat6 */
+			0x13a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc2_dat7 */
+		>;
+	};
+
 	display_pins: pinmux_display_pins {
 		pinctrl-single,pins = <
 			0x0d4 (PIN_OUTPUT | MUX_MODE4)		/* RX51_LCD_RESET_GPIO */
@@ -358,8 +373,14 @@
 	cd-gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>; /* 160 */
 };
 
+/* most boards use vaux3, only some old versions use vmmc2 instead */
 &mmc2 {
-	status = "disabled";
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins>;
+	vmmc-supply = <&vaux3>;
+	vmmc_aux-supply = <&vsim>;
+	bus-width = <8>;
+	non-removable;
 };
 
 &mmc3 {
diff --git a/arch/arm/boot/dts/omap3-n950-n9.dtsi b/arch/arm/boot/dts/omap3-n950-n9.dtsi
index 94eb77d3b9dd..5c26c184f2c1 100644
--- a/arch/arm/boot/dts/omap3-n950-n9.dtsi
+++ b/arch/arm/boot/dts/omap3-n950-n9.dtsi
@@ -8,7 +8,7 @@
  * published by the Free Software Foundation.
  */
 
-#include "omap36xx.dtsi"
+#include "omap36xx-hs.dtsi"
 
 / {
 	cpus {
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index f3a0c26ed0c2..daabf99d402a 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -82,6 +82,13 @@
 		ranges;
 		ti,hwmods = "l3_main";
 
+		aes: aes@480c5000 {
+			compatible = "ti,omap3-aes";
+			ti,hwmods = "aes";
+			reg = <0x480c5000 0x50>;
+			interrupts = <0>;
+		};
+
 		counter32k: counter@48320000 {
 			compatible = "ti,omap-counter32k";
 			reg = <0x48320000 0x20>;
@@ -260,6 +267,13 @@
 			ti,hwmods = "i2c3";
 		};
 
+		mailbox: mailbox@48094000 {
+			compatible = "ti,omap3-mailbox";
+			ti,hwmods = "mailbox";
+			reg = <0x48094000 0x200>;
+			interrupts = <26>;
+		};
+
 		mcspi1: spi@48098000 {
 			compatible = "ti,omap2-mcspi";
 			reg = <0x48098000 0x100>;
@@ -357,6 +371,13 @@
 			dma-names = "tx", "rx";
 		};
 
+		mmu_isp: mmu@480bd400 {
+			compatible = "ti,omap3-mmu-isp";
+			ti,hwmods = "mmu_isp";
+			reg = <0x480bd400 0x80>;
+			interrupts = <8>;
+		};
+
 		wdt2: wdt@48314000 {
 			compatible = "ti,omap3-wdt";
 			reg = <0x48314000 0x80>;
@@ -442,6 +463,27 @@
 			dma-names = "tx", "rx";
 		};
 
+		sham: sham@480c3000 {
+			compatible = "ti,omap3-sham";
+			ti,hwmods = "sham";
+			reg = <0x480c3000 0x64>;
+			interrupts = <49>;
+		};
+
+		smartreflex_core: smartreflex@480cb000 {
+			compatible = "ti,omap3-smartreflex-core";
+			ti,hwmods = "smartreflex_core";
+			reg = <0x480cb000 0x400>;
+			interrupts = <19>;
+		};
+
+		smartreflex_mpu_iva: smartreflex@480c9000 {
+			compatible = "ti,omap3-smartreflex-iva";
+			ti,hwmods = "smartreflex_mpu_iva";
+			reg = <0x480c9000 0x400>;
+			interrupts = <18>;
+		};
+
 		timer1: timer@48318000 {
 			compatible = "ti,omap3430-timer";
 			reg = <0x48318000 0x400>;
diff --git a/arch/arm/boot/dts/omap34xx-hs.dtsi b/arch/arm/boot/dts/omap34xx-hs.dtsi
new file mode 100644
index 000000000000..1ff626489546
--- /dev/null
+++ b/arch/arm/boot/dts/omap34xx-hs.dtsi
@@ -0,0 +1,16 @@
+/* Disabled modules for secure omaps */
+
+#include "omap34xx.dtsi"
+
+/* Secure omaps have some devices inaccessible depending on the firmware */
+&aes {
+	status = "disabled";
+};
+
+&sham {
+	status = "disabled";
+};
+
+&timer12 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/omap36xx-hs.dtsi b/arch/arm/boot/dts/omap36xx-hs.dtsi
new file mode 100644
index 000000000000..2c7febb0e016
--- /dev/null
+++ b/arch/arm/boot/dts/omap36xx-hs.dtsi
@@ -0,0 +1,16 @@
+/* Disabled modules for secure omaps */
+
+#include "omap36xx.dtsi"
+
+/* Secure omaps have some devices inaccessible depending on the firmware */
+&aes {
+	status = "disabled";
+};
+
+&sham {
+	status = "disabled";
+};
+
+&timer12 {
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 298e85020e1b..88c6a05cab41 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -246,15 +246,6 @@
 			0xf0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c4_sda */
 		>;
 	};
-};
-
-&omap4_pmx_wkup {
-	led_wkgpio_pins: pinmux_leds_wkpins {
-		pinctrl-single,pins = <
-			0x1a (PIN_OUTPUT | MUX_MODE3)	/* gpio_wk7 */
-			0x1c (PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
-		>;
-	};
 
 	/*
 	 * wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP
@@ -274,7 +265,7 @@
 		pinctrl-single,pins = <
 			0x38 (PIN_INPUT | MUX_MODE3)		/* gpmc_ncs2.gpio_52 */
 			0x3a (PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
-			0x108 (PIN_OUTPUT | MUX_MODE0)		/* sdmmc5_clk.sdmmc5_clk */
+			0x108 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
 			0x10a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
 			0x10c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
 			0x10e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
@@ -284,6 +275,15 @@
 	};
 };
 
+&omap4_pmx_wkup {
+	led_wkgpio_pins: pinmux_leds_wkpins {
+		pinctrl-single,pins = <
+			0x1a (PIN_OUTPUT | MUX_MODE3)	/* gpio_wk7 */
+			0x1c (PIN_OUTPUT | MUX_MODE3)	/* gpio_wk8 */
+		>;
+	};
+};
+
 &i2c1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c1_pins>;
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 5fc3f43c5a81..dbc81fb6ef03 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -300,12 +300,12 @@
 	wl12xx_pins: pinmux_wl12xx_pins {
 		pinctrl-single,pins = <
 			0x3a (PIN_INPUT | MUX_MODE3)		/* gpmc_ncs3.gpio_53 */
-			0x108 (PIN_OUTPUT | MUX_MODE3)		/* sdmmc5_clk.sdmmc5_clk */
-			0x10a (PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc5_cmd.sdmmc5_cmd */
-			0x10c (PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc5_dat0.sdmmc5_dat0 */
-			0x10e (PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc5_dat1.sdmmc5_dat1 */
-			0x110 (PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc5_dat2.sdmmc5_dat2 */
-			0x112 (PIN_INPUT_PULLUP | MUX_MODE3)	/* sdmmc5_dat3.sdmmc5_dat3 */
+			0x108 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_clk.sdmmc5_clk */
+			0x10a (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_cmd.sdmmc5_cmd */
+			0x10c (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat0.sdmmc5_dat0 */
+			0x10e (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat1.sdmmc5_dat1 */
+			0x110 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat2.sdmmc5_dat2 */
+			0x112 (PIN_INPUT_PULLUP | MUX_MODE0)	/* sdmmc5_dat3.sdmmc5_dat3 */
 		>;
 	};
 };
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index 6d09b8d42fdd..f936476c2753 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -245,14 +245,14 @@
 
 					mpu_periph_clk: mpu_periph_clk {
 						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
+						compatible = "altr,socfpga-perip-clk";
 						clocks = <&mpuclk>;
 						fixed-divider = <4>;
 					};
 
 					mpu_l2_ram_clk: mpu_l2_ram_clk {
 						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
+						compatible = "altr,socfpga-perip-clk";
 						clocks = <&mpuclk>;
 						fixed-divider = <2>;
 					};
@@ -266,8 +266,9 @@
 
 					l3_main_clk: l3_main_clk {
 						#clock-cells = <0>;
-						compatible = "altr,socfpga-gate-clk";
+						compatible = "altr,socfpga-perip-clk";
 						clocks = <&mainclk>;
+						fixed-divider = <1>;
 					};
 
 					l3_mp_clk: l3_mp_clk {
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index c1751a64889a..7f5878c2784a 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -193,7 +193,10 @@
 		pio: pinctrl@01c20800 {
 			compatible = "allwinner,sun6i-a31-pinctrl";
 			reg = <0x01c20800 0x400>;
-			interrupts = <0 11 1>, <0 15 1>, <0 16 1>, <0 17 1>;
+			interrupts = <0 11 4>,
+				     <0 15 4>,
+				     <0 16 4>,
+				     <0 17 4>;
 			clocks = <&apb1_gates 5>;
 			gpio-controller;
 			interrupt-controller;
@@ -212,11 +215,11 @@
 		timer@01c20c00 {
 			compatible = "allwinner,sun4i-timer";
 			reg = <0x01c20c00 0xa0>;
-			interrupts = <0 18 1>,
-				     <0 19 1>,
-				     <0 20 1>,
-				     <0 21 1>,
-				     <0 22 1>;
+			interrupts = <0 18 4>,
+				     <0 19 4>,
+				     <0 20 4>,
+				     <0 21 4>,
+				     <0 22 4>;
 			clocks = <&osc24M>;
 		};
 
@@ -228,7 +231,7 @@
 		uart0: serial@01c28000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
-			interrupts = <0 0 1>;
+			interrupts = <0 0 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 16>;
@@ -238,7 +241,7 @@
 		uart1: serial@01c28400 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28400 0x400>;
-			interrupts = <0 1 1>;
+			interrupts = <0 1 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 17>;
@@ -248,7 +251,7 @@
 		uart2: serial@01c28800 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28800 0x400>;
-			interrupts = <0 2 1>;
+			interrupts = <0 2 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 18>;
@@ -258,7 +261,7 @@
 		uart3: serial@01c28c00 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28c00 0x400>;
-			interrupts = <0 3 1>;
+			interrupts = <0 3 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 19>;
@@ -268,7 +271,7 @@
 		uart4: serial@01c29000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c29000 0x400>;
-			interrupts = <0 4 1>;
+			interrupts = <0 4 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 20>;
@@ -278,7 +281,7 @@
 		uart5: serial@01c29400 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c29400 0x400>;
-			interrupts = <0 5 1>;
+			interrupts = <0 5 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb2_gates 21>;
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index e46cfedde74c..367611a0730b 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -170,7 +170,7 @@
 		emac: ethernet@01c0b000 {
 			compatible = "allwinner,sun4i-emac";
 			reg = <0x01c0b000 0x1000>;
-			interrupts = <0 55 1>;
+			interrupts = <0 55 4>;
 			clocks = <&ahb_gates 17>;
 			status = "disabled";
 		};
@@ -186,7 +186,7 @@
 		pio: pinctrl@01c20800 {
 			compatible = "allwinner,sun7i-a20-pinctrl";
 			reg = <0x01c20800 0x400>;
-			interrupts = <0 28 1>;
+			interrupts = <0 28 4>;
 			clocks = <&apb0_gates 5>;
 			gpio-controller;
 			interrupt-controller;
@@ -251,12 +251,12 @@
 		timer@01c20c00 {
 			compatible = "allwinner,sun4i-timer";
 			reg = <0x01c20c00 0x90>;
-			interrupts = <0 22 1>,
-				     <0 23 1>,
-				     <0 24 1>,
-				     <0 25 1>,
-				     <0 67 1>,
-				     <0 68 1>;
+			interrupts = <0 22 4>,
+				     <0 23 4>,
+				     <0 24 4>,
+				     <0 25 4>,
+				     <0 67 4>,
+				     <0 68 4>;
 			clocks = <&osc24M>;
 		};
 
@@ -273,7 +273,7 @@
 		uart0: serial@01c28000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
-			interrupts = <0 1 1>;
+			interrupts = <0 1 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb1_gates 16>;
@@ -283,7 +283,7 @@
 		uart1: serial@01c28400 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28400 0x400>;
-			interrupts = <0 2 1>;
+			interrupts = <0 2 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb1_gates 17>;
@@ -293,7 +293,7 @@
 		uart2: serial@01c28800 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28800 0x400>;
-			interrupts = <0 3 1>;
+			interrupts = <0 3 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb1_gates 18>;
@@ -303,7 +303,7 @@
 		uart3: serial@01c28c00 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28c00 0x400>;
-			interrupts = <0 4 1>;
+			interrupts = <0 4 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb1_gates 19>;
@@ -313,7 +313,7 @@
 		uart4: serial@01c29000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c29000 0x400>;
-			interrupts = <0 17 1>;
+			interrupts = <0 17 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb1_gates 20>;
@@ -323,7 +323,7 @@
 		uart5: serial@01c29400 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c29400 0x400>;
-			interrupts = <0 18 1>;
+			interrupts = <0 18 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb1_gates 21>;
@@ -333,7 +333,7 @@
 		uart6: serial@01c29800 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c29800 0x400>;
-			interrupts = <0 19 1>;
+			interrupts = <0 19 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb1_gates 22>;
@@ -343,7 +343,7 @@
 		uart7: serial@01c29c00 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c29c00 0x400>;
-			interrupts = <0 20 1>;
+			interrupts = <0 20 4>;
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			clocks = <&apb1_gates 23>;
@@ -353,7 +353,7 @@
 		i2c0: i2c@01c2ac00 {
 			compatible = "allwinner,sun4i-i2c";
 			reg = <0x01c2ac00 0x400>;
-			interrupts = <0 7 1>;
+			interrupts = <0 7 4>;
 			clocks = <&apb1_gates 0>;
 			clock-frequency = <100000>;
 			status = "disabled";
@@ -362,7 +362,7 @@
 		i2c1: i2c@01c2b000 {
 			compatible = "allwinner,sun4i-i2c";
 			reg = <0x01c2b000 0x400>;
-			interrupts = <0 8 1>;
+			interrupts = <0 8 4>;
 			clocks = <&apb1_gates 1>;
 			clock-frequency = <100000>;
 			status = "disabled";
@@ -371,7 +371,7 @@
 		i2c2: i2c@01c2b400 {
 			compatible = "allwinner,sun4i-i2c";
 			reg = <0x01c2b400 0x400>;
-			interrupts = <0 9 1>;
+			interrupts = <0 9 4>;
 			clocks = <&apb1_gates 2>;
 			clock-frequency = <100000>;
 			status = "disabled";
@@ -380,7 +380,7 @@
 		i2c3: i2c@01c2b800 {
 			compatible = "allwinner,sun4i-i2c";
 			reg = <0x01c2b800 0x400>;
-			interrupts = <0 88 1>;
+			interrupts = <0 88 4>;
 			clocks = <&apb1_gates 3>;
 			clock-frequency = <100000>;
 			status = "disabled";
@@ -389,7 +389,7 @@
 		i2c4: i2c@01c2bc00 {
 			compatible = "allwinner,sun4i-i2c";
 			reg = <0x01c2bc00 0x400>;
-			interrupts = <0 89 1>;
+			interrupts = <0 89 4>;
 			clocks = <&apb1_gates 15>;
 			clock-frequency = <100000>;
 			status = "disabled";