diff options
author | Mathieu Malaterre <malat@debian.org> | 2017-12-15 13:46:48 +0100 |
---|---|---|
committer | Arnd Bergmann <arnd@arndb.de> | 2018-02-22 17:39:02 +0100 |
commit | e519eedb6848198cb6fb7f50abb2e416309c0ce5 (patch) | |
tree | 4be0238328325f709ac13926ae16cb0049e6724f /arch/arm/boot/dts/zx296702.dtsi | |
parent | 9977a8c3497a8f7f7f951994f298a8e4d961234f (diff) | |
download | linux-e519eedb6848198cb6fb7f50abb2e416309c0ce5.tar.bz2 |
arm: zx: dts: Remove leading 0x and 0s from bindings notation
Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C
For simplicity, two sed expressions were used to solve each warnings separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This will solve as a side effect warning:
Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: David Daney <ddaney@caviumnetworks.com>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'arch/arm/boot/dts/zx296702.dtsi')
-rw-r--r-- | arch/arm/boot/dts/zx296702.dtsi | 20 |
1 files changed, 10 insertions, 10 deletions
diff --git a/arch/arm/boot/dts/zx296702.dtsi b/arch/arm/boot/dts/zx296702.dtsi index 8a74efdb6360..240e7a23d81f 100644 --- a/arch/arm/boot/dts/zx296702.dtsi +++ b/arch/arm/boot/dts/zx296702.dtsi @@ -56,7 +56,7 @@ clocks = <&topclk ZX296702_A9_PERIPHCLK>; }; - l2cc: l2-cache-controller@0x00c00000 { + l2cc: l2-cache-controller@c00000 { compatible = "arm,pl310-cache"; reg = <0x00c00000 0x1000>; cache-unified; @@ -67,30 +67,30 @@ arm,double-linefill-incr = <0>; }; - pcu: pcu@0xa0008000 { + pcu: pcu@a0008000 { compatible = "zte,zx296702-pcu"; reg = <0xa0008000 0x1000>; }; - topclk: topclk@0x09800000 { + topclk: topclk@9800000 { compatible = "zte,zx296702-topcrm-clk"; reg = <0x09800000 0x1000>; #clock-cells = <1>; }; - lsp1clk: lsp1clk@0x09400000 { + lsp1clk: lsp1clk@9400000 { compatible = "zte,zx296702-lsp1crpm-clk"; reg = <0x09400000 0x1000>; #clock-cells = <1>; }; - lsp0clk: lsp0clk@0x0b000000 { + lsp0clk: lsp0clk@b000000 { compatible = "zte,zx296702-lsp0crpm-clk"; reg = <0x0b000000 0x1000>; #clock-cells = <1>; }; - uart0: serial@0x09405000 { + uart0: serial@9405000 { compatible = "zte,zx296702-uart"; reg = <0x09405000 0x1000>; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; @@ -98,7 +98,7 @@ status = "disabled"; }; - uart1: serial@0x09406000 { + uart1: serial@9406000 { compatible = "zte,zx296702-uart"; reg = <0x09406000 0x1000>; interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; @@ -106,7 +106,7 @@ status = "disabled"; }; - mmc0: mmc@0x09408000 { + mmc0: mmc@9408000 { compatible = "snps,dw-mshc"; #address-cells = <1>; #size-cells = <0>; @@ -119,7 +119,7 @@ status = "disabled"; }; - mmc1: mmc@0x0b003000 { + mmc1: mmc@b003000 { compatible = "snps,dw-mshc"; #address-cells = <1>; #size-cells = <0>; @@ -132,7 +132,7 @@ status = "disabled"; }; - sysctrl: sysctrl@0xa0007000 { + sysctrl: sysctrl@a0007000 { compatible = "zte,sysctrl", "syscon"; reg = <0xa0007000 0x1000>; }; |