diff options
author | Philipp Rossak <embed3d@gmail.com> | 2018-02-14 15:10:25 +0100 |
---|---|---|
committer | Maxime Ripard <maxime.ripard@bootlin.com> | 2018-02-15 10:04:28 +0100 |
commit | 70b8d21496758dd7ff600ec9de0ee3812fac7a40 (patch) | |
tree | 819a93829788c15259e5be3ce9dedb5971f6f573 /arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | |
parent | b23af6ad8d2f708c4c3f92dd8f82c233247ba8bf (diff) | |
download | linux-70b8d21496758dd7ff600ec9de0ee3812fac7a40.tar.bz2 |
ARM: dts: sun6i: a31s: bpi-m2: add missing regulators
This patch fixes a bootproblem with the Bananapi M2 board. Since there
are some regulators missing we add them right now. Those values come
from the schematic, below you can find a small overview:
* reg_aldo1: 3,3V, powers the wifi
* reg_aldo2: 2,5V, powers the IO of the RTL8211E
* reg_aldo3: 3,3V, powers the audio
* reg_dldo1: 3,0V, powers the RTL8211E
* reg_dldo2: 2,8V, powers the analog part of the csi
* reg_dldo3: 3,3V, powers misc
* reg_eldo1: 1,8V, powers the csi
* reg_ldo_io1:1,8V, powers the gpio
* reg_dc5ldo: needs to be always on
This patch updates also the vmmc-supply properties on the mmc0 and mmc2
node to use the allready existent regulators.
We can now remove the sunxi-common-regulators.dtsi include since we
don't need it anymore.
Fixes: 7daa21370075 ("ARM: dts: sunxi: Add regulators for Sinovoip BPI-M2")
Cc: <stable@vger.kernel.org>
Signed-off-by: Philipp Rossak <embed3d@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Diffstat (limited to 'arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts')
-rw-r--r-- | arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts | 61 |
1 files changed, 58 insertions, 3 deletions
diff --git a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts index fb34f32502cf..b2758dd8ce43 100644 --- a/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts +++ b/arch/arm/boot/dts/sun6i-a31s-sinovoip-bpi-m2.dts @@ -42,7 +42,6 @@ /dts-v1/; #include "sun6i-a31s.dtsi" -#include "sunxi-common-regulators.dtsi" #include <dt-bindings/gpio/gpio.h> / { @@ -99,6 +98,7 @@ pinctrl-0 = <&gmac_pins_rgmii_a>, <&gmac_phy_reset_pin_bpi_m2>; phy = <&phy1>; phy-mode = "rgmii"; + phy-supply = <®_dldo1>; snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>; /* PA21 */ snps,reset-active-low; snps,reset-delays-us = <0 10000 30000>; @@ -118,7 +118,7 @@ &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bpi_m2>; - vmmc-supply = <®_vcc3v0>; + vmmc-supply = <®_dcdc1>; bus-width = <4>; cd-gpios = <&pio 0 4 GPIO_ACTIVE_HIGH>; /* PA4 */ cd-inverted; @@ -132,7 +132,7 @@ &mmc2 { pinctrl-names = "default"; pinctrl-0 = <&mmc2_pins_a>; - vmmc-supply = <®_vcc3v0>; + vmmc-supply = <®_aldo1>; mmc-pwrseq = <&mmc2_pwrseq>; bus-width = <4>; non-removable; @@ -195,7 +195,28 @@ #include "axp22x.dtsi" +®_aldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "vcc-gmac"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; +}; + ®_dc5ldo { + regulator-always-on; regulator-min-microvolt = <700000>; regulator-max-microvolt = <1320000>; regulator-name = "vdd-cpus"; @@ -235,6 +256,40 @@ regulator-name = "vcc-dram"; }; +®_dldo1 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-mac"; +}; + +®_dldo2 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "avdd-csi"; +}; + +®_dldo3 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pb"; +}; + +®_eldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vdd-csi"; + status = "okay"; +}; + +®_ldo_io1 { + regulator-always-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-pm-cpus"; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; |