diff options
author | Hans de Goede <hdegoede@redhat.com> | 2016-11-16 14:15:08 +0100 |
---|---|---|
committer | Maxime Ripard <maxime.ripard@free-electrons.com> | 2016-11-22 15:34:09 +0100 |
commit | 9bfe7c8d1af5a8a55a21b5407e1a35ed3c1b98eb (patch) | |
tree | f0433c71a45992ed065257e59f8d31e3236eedc9 /arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi | |
parent | be7bc6b98781451d9ec55fa9267ac895f060d172 (diff) | |
download | linux-9bfe7c8d1af5a8a55a21b5407e1a35ed3c1b98eb.tar.bz2 |
ARM: dts: sun5i: Add touchscreen node to reference-design-tablet.dtsi
Just like on sun8i all sun5i tablets use the same interrupt and power
gpios for their touchscreens. I've checked all known a13 fex files and
only the UTOO P66 uses a different gpio for the interrupt.
Add a touchscreen node to sun5i-reference-design-tablet.dtsi, which
fills in the necessary gpios to avoid duplication in the tablet dts files,
just like we do in sun8i-reference-design-tablet.dtsi.
This will make future patches adding touchscreen nodes to a13 tablets
simpler.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Diffstat (limited to 'arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi')
-rw-r--r-- | arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi | 25 |
1 files changed, 25 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi index 20cc940f5f91..82f87cdcd164 100644 --- a/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi +++ b/arch/arm/boot/dts/sun5i-reference-design-tablet.dtsi @@ -41,6 +41,7 @@ */ #include "sunxi-reference-design-tablet.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pwm/pwm.h> / { @@ -84,6 +85,23 @@ }; &i2c1 { + /* + * The gsl1680 is rated at 400KHz and it will not work reliable at + * 100KHz, this has been confirmed on multiple different q8 tablets. + * All other devices on this bus are also rated for 400KHz. + */ + clock-frequency = <400000>; + + touchscreen: touchscreen { + interrupt-parent = <&pio>; + interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>; /* EINT11 (PG11) */ + pinctrl-names = "default"; + pinctrl-0 = <&ts_power_pin>; + power-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ + /* Tablet dts must provide reg and compatible */ + status = "disabled"; + }; + pcf8563: rtc@51 { compatible = "nxp,pcf8563"; reg = <0x51>; @@ -125,6 +143,13 @@ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; + ts_power_pin: ts_power_pin { + pins = "PB3"; + function = "gpio_out"; + drive-strength = <10>; + bias-disable; + }; + usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 { allwinner,pins = "PG1"; allwinner,function = "gpio_in"; |