Merge tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM devicetree updates from Arnd Bergmann:
 "This is the set of device tree changes, mostly covering new hardware
  support, with 577 patches touching a little over 500 files.

  There are five new Arm SoCs supported in this release, all of them for
  existing SoC families:

   - Realtek RTD1195, RTD1395 and RTD1619 -- three SoCs used in both NAS
     devices and Android Set-top-box designs, along with the
     "Horseradish", "Lion Skin" and "Mjolnir" reference platforms; the
     Mele X1000 and Xnano X5 set-top-boxes and the Banana Pi BPi-M4
     single-board computer.

   - Renesas RZ/G1H (r8a7742) -- a high-end 32-bit industrial SoC and
     the iW-RainboW-G21D-Qseven-RZG1H board/SoM

   - Rockchips RK3326 -- low-end 64-bit SoC along with the Odroid-GO
     Advance game console

  Newly added machines on already supported SoCs are:

   - AMLogic S905D based Smartlabs SML-5442TW TV box

   - AMLogic S905X3 based ODROID-C4 SBC

   - AMLogic S922XH based Beelink GT-King Pro TV box

   - Allwinner A20 based Olimex A20-OLinuXino-LIME-eMMC SBC

   - Aspeed ast2500 based BMCs in Facebook x86 "Yosemite V2" and YADRO
     OpenPower P9 "Nicole"

   - Marvell Kirkwood based Check Point L-50 router

   - Mediatek MT8173 based Elm/Hana Chromebook laptops

   - Microchip SAMA5D2 "Industrial Connectivity Platform" reference
     board

   - NXP i.MX8m based Beacon i.MX8m-Mini SoM development kit

   - Octavo OSDMP15x based Linux Automation MC-1 development board

   - Qualcomm SDM630 based Xiaomi Redmi Note 7 phone

   - Realtek RTD1295 based Xnano X5 TV Box

   - STMicroelectronics STM32MP1 based Stinger96 single-board computer
     and IoT Box

   - Samsung Exynos4210 based based Samsung Galaxy S2 phone

   - Socionext Uniphier based Akebi96 SBC

   - TI Keystone based K2G Evaluation board

   - TI am5729 based Beaglebone-AI development board

  Include device descriptions for additional hardware support in
  existing SoCs and machines based on all major SoC platforms:

   - AMlogic Meson

   - Allwinner sunxi

   - Arm Juno/VFP/Vexpress/Integrator

   - Broadcom bcm283x/bcm2711

   - Hisilicon hi6220

   - Marvell EBU

   - Mediatek MT27xx, MT76xx, MT81xx and MT67xx

   - Microchip SAMA5D2

   - NXP i.MX6/i.MX7/i.MX8 and Layerscape

   - Nvidia Tegra

   - Qualcomm Snapdragon

   - Renesas r8a77961, r8a7791

   - Rockchips RK32xx/RK33xx

   - ST-Ericsson ux500

   - STMicroelectronics SMT32

   - Samsung Exynos and S5PV210

   - Socionext Uniphier

   - TI OMAP5/DRA7 and Keystone"

* tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (564 commits)
  ARM: dts: keystone: Rename "msmram" node to "sram"
  arm: dts: mt2712: add uart APDMA to device tree
  arm64: dts: mt8183: add mmc node
  arm64: dts: mt2712: add ethernet device node
  arm64: tegra: Make the RTC a wakeup source on Jetson Nano and TX1
  ARM: dts: mmp3: Add the fifth SD HCI
  ARM: dts: berlin*: Fix up the SDHCI node names
  ARM: dts: mmp3: Fix USB & USB PHY node names
  ARM: dts: mmp3: Fix L2 cache controller node name
  ARM: dts: mmp*: Fix up encoding of the /rtc interrupts property
  ARM: dts: pxa*: Fix up encoding of the /rtc interrupts property
  ARM: dts: pxa910: Fix the gpio interrupt cell number
  ARM: dts: pxa3xx: Fix up encoding of the /gpio interrupts property
  ARM: dts: pxa168: Fix the gpio interrupt cell number
  ARM: dts: pxa168: Add missing address/size cells to i2c nodes
  ARM: dts: dove: Fix interrupt controller node name
  ARM: dts: kirkwood: Fix interrupt controller node name
  arm64: dts: Add SC9863A emmc and sd card nodes
  arm64: dts: Add SC9863A clock nodes
  arm64: dts: mt6358: add PMIC MT6358 related nodes
  ...

1 files changed, 0 insertions, 8 deletions

diff --git a/arch/arm/boot/dts/stm32mp157c-dk2.dts b/arch/arm/boot/dts/stm32mp157c-dk2.dts
index 7985b80967ca..9a8a26710ac1 100644
--- a/arch/arm/boot/dts/stm32mp157c-dk2.dts
+++ b/arch/arm/boot/dts/stm32mp157c-dk2.dts
@@ -27,15 +27,10 @@
 };
 
 &dsi {
-	#address-cells = <1>;
-	#size-cells = <0>;
 	status = "okay";
 	phy-dsi-supply = <&reg18>;
 
 	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		port@0 {
 			reg = <0>;
 			dsi_in: endpoint {
@@ -83,9 +78,6 @@
 	status = "okay";
 
 	port {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		ltdc_ep1_out: endpoint@1 {
 			reg = <1>;
 			remote-endpoint = <&dsi_in>;