diff options
author | Linus Walleij <linus.walleij@linaro.org> | 2014-09-30 12:16:25 +0200 |
---|---|---|
committer | Linus Walleij <linus.walleij@linaro.org> | 2014-10-20 09:08:26 +0200 |
commit | 1637d480f873ca305f7f090e3b3bc92430b5892f (patch) | |
tree | c254049d778fe41f11b35623561173873c6a1177 /arch/arm/boot/dts/ste-nomadik-stn8815.dtsi | |
parent | 51d39936acba666774b596829277db3e13e5e970 (diff) | |
download | linux-1637d480f873ca305f7f090e3b3bc92430b5892f.tar.bz2 |
pinctrl: nomadik: force-convert to generic config bindings
This converts the Nomadik pin controller and all associated device
trees to use the standard, generic config bindings for pin controllers.
There are no such device trees deployed in the wild so this is
safe to do to set a good example.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'arch/arm/boot/dts/ste-nomadik-stn8815.dtsi')
-rw-r--r-- | arch/arm/boot/dts/ste-nomadik-stn8815.dtsi | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index 7cedb5aba9a9..c8b4a93180f8 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -123,18 +123,18 @@ mmcsd_default_mode: mmcsd_default { mmcsd_default_cfg1 { /* MCCLK */ - ste,pins = "GPIO8_B10"; + pins = "GPIO8_B10"; ste,output = <0>; }; mmcsd_default_cfg2 { /* MCCMDDIR, MCDAT0DIR, MCDAT31DIR */ - ste,pins = "GPIO10_C11", "GPIO15_A12", + pins = "GPIO10_C11", "GPIO15_A12", "GPIO16_C13"; ste,output = <1>; }; mmcsd_default_cfg3 { /* MCCMD, MCDAT3-0, MCMSFBCLK */ - ste,pins = "GPIO9_A10", "GPIO11_B11", + pins = "GPIO9_A10", "GPIO11_B11", "GPIO12_A11", "GPIO13_C12", "GPIO14_B12", "GPIO24_C15"; ste,input = <1>; @@ -150,7 +150,7 @@ }; i2c0_default_mode: i2c0_default { i2c0_default_cfg { - ste,pins = "GPIO62_D3", "GPIO63_D2"; + pins = "GPIO62_D3", "GPIO63_D2"; ste,input = <0>; }; }; @@ -164,7 +164,7 @@ }; i2c1_default_mode: i2c1_default { i2c1_default_cfg { - ste,pins = "GPIO53_L4", "GPIO54_L3"; + pins = "GPIO53_L4", "GPIO54_L3"; ste,input = <0>; }; }; @@ -172,7 +172,7 @@ i2c2 { i2c2_default_mode: i2c2_default { i2c2_default_cfg { - ste,pins = "GPIO73_C21", "GPIO74_C20"; + pins = "GPIO73_C21", "GPIO74_C20"; ste,input = <0>; }; }; |