diff options
author | Linus Walleij <linus.walleij@linaro.org> | 2014-09-30 12:16:25 +0200 |
---|---|---|
committer | Linus Walleij <linus.walleij@linaro.org> | 2014-10-20 09:08:26 +0200 |
commit | 1637d480f873ca305f7f090e3b3bc92430b5892f (patch) | |
tree | c254049d778fe41f11b35623561173873c6a1177 /arch/arm/boot/dts/ste-hrefv60plus.dtsi | |
parent | 51d39936acba666774b596829277db3e13e5e970 (diff) | |
download | linux-1637d480f873ca305f7f090e3b3bc92430b5892f.tar.bz2 |
pinctrl: nomadik: force-convert to generic config bindings
This converts the Nomadik pin controller and all associated device
trees to use the standard, generic config bindings for pin controllers.
There are no such device trees deployed in the wild so this is
safe to do to set a good example.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'arch/arm/boot/dts/ste-hrefv60plus.dtsi')
-rw-r--r-- | arch/arm/boot/dts/ste-hrefv60plus.dtsi | 38 |
1 files changed, 19 insertions, 19 deletions
diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi index 2b4104ef07de..a4bc9e77d640 100644 --- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi +++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi @@ -49,7 +49,7 @@ /* SD card detect GPIO pin, extend default state */ sdi0_default_mode: sdi0_default { default_hrefv60_cfg1 { - ste,pins = "GPIO95_E8"; + pins = "GPIO95_E8"; ste,config = <&gpio_in_pu>; }; }; @@ -68,15 +68,15 @@ groups = "ipgpio0_c_1", "ipgpio1_c_1", "ipgpio4_c_1"; }; hrefv60_cfg1 { - ste,pins = "GPIO6_AF6", "GPIO7_AG5"; + pins = "GPIO6_AF6", "GPIO7_AG5"; ste,config = <&in_pu>; }; hrefv60_cfg2 { - ste,pins = "GPIO21_AB3"; + pins = "GPIO21_AB3"; ste,config = <&gpio_out_lo>; }; hrefv60_cfg3 { - ste,pins = "GPIO64_F3"; + pins = "GPIO64_F3"; ste,config = <&out_lo>; }; }; @@ -89,7 +89,7 @@ */ etm_hrefv60_mode: etm_hrefv60 { hrefv60_cfg1 { - ste,pins = + pins = "GPIO70_G5", "GPIO71_G4", "GPIO72_H4", @@ -103,11 +103,11 @@ nahj_hrefv60_mode: nahj_hrefv60 { /* NAHJ CTRL on GPIO76 to low, CTRL_INV on GPIO216 to high */ hrefv60_cfg1 { - ste,pins = "GPIO76_J2"; + pins = "GPIO76_J2"; ste,config = <&gpio_out_lo>; }; hrefv60_cfg2 { - ste,pins = "GPIO216_AG12"; + pins = "GPIO216_AG12"; ste,config = <&gpio_out_hi>; }; }; @@ -116,13 +116,13 @@ nfc_hrefv60_mode: nfc_hrefv60 { /* NFC ENA and RESET to low, pulldown IRQ line */ hrefv60_cfg1 { - ste,pins = + pins = "GPIO77_H1", /* NFC_ENA */ "GPIO142_C11"; /* NFC_RESET */ ste,config = <&gpio_out_lo>; }; hrefv60_cfg2 { - ste,pins = "GPIO144_B13"; /* NFC_IRQ */ + pins = "GPIO144_B13"; /* NFC_IRQ */ ste,config = <&gpio_in_pd>; }; }; @@ -130,11 +130,11 @@ force { force_hrefv60_mode: force_hrefv60 { hrefv60_cfg1 { - ste,pins = "GPIO91_B6"; /* FORCE_SENSING_INT */ + pins = "GPIO91_B6"; /* FORCE_SENSING_INT */ ste,config = <&gpio_in_pu>; }; hrefv60_cfg2 { - ste,pins = + pins = "GPIO92_D6", /* FORCE_SENSING_RST */ "GPIO97_D9"; /* FORCE_SENSING_WU */ ste,config = <&gpio_out_lo>; @@ -144,7 +144,7 @@ dipro { dipro_hrefv60_mode: dipro_hrefv60 { hrefv60_cfg1 { - ste,pins = "GPIO139_C9"; /* DIPRO_INT */ + pins = "GPIO139_C9"; /* DIPRO_INT */ ste,config = <&gpio_in_pu>; }; }; @@ -153,7 +153,7 @@ vaudio_hf_hrefv60_mode: vaudio_hf_hrefv60 { /* Audio Amplifier HF enable GPIO */ hrefv60_cfg1 { - ste,pins = "GPIO149_B14"; /* VAUDIO_HF_EN, enable MAX8968 */ + pins = "GPIO149_B14"; /* VAUDIO_HF_EN, enable MAX8968 */ ste,config = <&gpio_out_hi>; }; }; @@ -165,7 +165,7 @@ * pull low to reset state */ hrefv60_cfg1 { - ste,pins = "GPIO171_D23"; /* GBF_ENA_RESET */ + pins = "GPIO171_D23"; /* GBF_ENA_RESET */ ste,config = <&gpio_out_lo>; }; }; @@ -174,7 +174,7 @@ hdtv_hrefv60_mode: hdtv_hrefv60 { /* MSP : HDTV INTERFACE GPIO line */ hrefv60_cfg1 { - ste,pins = "GPIO192_AJ27"; + pins = "GPIO192_AJ27"; ste,config = <&gpio_in_pd>; }; }; @@ -187,11 +187,11 @@ * reset signals low. */ hrefv60_cfg1 { - ste,pins = "GPIO143_D12", "GPIO146_D13"; + pins = "GPIO143_D12", "GPIO146_D13"; ste,config = <&gpio_out_lo>; }; hrefv60_cfg2 { - ste,pins = "GPIO67_G2"; + pins = "GPIO67_G2"; ste,config = <&gpio_in_pu>; }; }; @@ -204,11 +204,11 @@ * Drive DISP1 reset high (not reset), driver DISP2 reset low (reset) */ hrefv60_cfg1 { - ste,pins ="GPIO65_F1"; + pins ="GPIO65_F1"; ste,config = <&gpio_out_hi>; }; hrefv60_cfg2 { - ste,pins ="GPIO66_G3"; + pins ="GPIO66_G3"; ste,config = <&gpio_out_lo>; }; }; |