Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC specific changes from Arnd Bergmann:
 "These changes are all to SoC-specific code, a total of 33 branches on
  17 platforms were pulled into this.  Like last time, Renesas sh-mobile
  is now the platform with the most changes, followed by OMAP and
  EXYNOS.

  Two new platforms, TI Keystone and Rockchips RK3xxx are added in this
  branch, both containing almost no platform specific code at all, since
  they are using generic subsystem interfaces for clocks, pinctrl,
  interrupts etc.  The device drivers are getting merged through the
  respective subsystem maintainer trees.

  One more SoC (u300) is now multiplatform capable and several others
  (shmobile, exynos, msm, integrator, kirkwood, clps711x) are moving
  towards that goal with this series but need more work.

  Also noteworthy is the work on PCI here, which is traditionally part
  of the SoC specific code.  With the changes done by Thomas Petazzoni,
  we can now more easily have PCI host controller drivers as loadable
  modules and keep them separate from the platform code in
  drivers/pci/host.  This has already led to the discovery that three
  platforms (exynos, spear and imx) are actually using an identical PCIe
  host controller and will be able to share a driver once support for
  spear and imx is added."

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (480 commits)
  ARM: integrator: let pciv3 use mem/premem from device tree
  ARM: integrator: set local side PCI addresses right
  ARM: dts: Add pcie controller node for exynos5440-ssdk5440
  ARM: dts: Add pcie controller node for Samsung EXYNOS5440 SoC
  ARM: EXYNOS: Enable PCIe support for Exynos5440
  pci: Add PCIe driver for Samsung Exynos
  ARM: OMAP5: voltagedomain data: remove temporary OMAP4 voltage data
  ARM: keystone: Move CPU bringup code to dedicated asm file
  ARM: multiplatform: always pick one CPU type
  ARM: imx: select syscon for IMX6SL
  ARM: keystone: select ARM_ERRATA_798181 only for SMP
  ARM: imx: Synertronixx scb9328 needs to select SOC_IMX1
  ARM: OMAP2+: AM43x: resolve SMP related build error
  dmaengine: edma: enable build for AM33XX
  ARM: edma: Add EDMA crossbar event mux support
  ARM: edma: Add DT and runtime PM support to the private EDMA API
  dmaengine: edma: Add TI EDMA device tree binding
  arm: add basic support for Rockchip RK3066a boards
  arm: add debug uarts for rockchip rk29xx and rk3xxx series
  arm: Add basic clocks for Rockchip rk3066a SoCs
  ...

1 files changed, 390 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
new file mode 100644
index 000000000000..56bfac93d3f6
--- /dev/null
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -0,0 +1,390 @@
+/*
+ * Copyright (c) 2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include "skeleton.dtsi"
+#include "rk3066a-clocks.dtsi"
+
+/ {
+	compatible = "rockchip,rk3066a";
+	interrupt-parent = <&gic>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x0>;
+		};
+		cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a9";
+			next-level-cache = <&L2>;
+			reg = <0x1>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges;
+
+		gic: interrupt-controller@1013d000 {
+			compatible = "arm,cortex-a9-gic";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			reg = <0x1013d000 0x1000>,
+			      <0x1013c100 0x0100>;
+		};
+
+		L2: l2-cache-controller@10138000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x10138000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		local-timer@1013c600 {
+			compatible = "arm,cortex-a9-twd-timer";
+			reg = <0x1013c600 0x20>;
+			interrupts = <GIC_PPI 13 0x304>;
+			clocks = <&dummy150m>;
+		};
+
+		timer@20038000 {
+			compatible = "snps,dw-apb-timer-osc";
+			reg = <0x20038000 0x100>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_gates1 0>, <&clk_gates7 7>;
+			clock-names = "timer", "pclk";
+		};
+
+		timer@2003a000 {
+			compatible = "snps,dw-apb-timer-osc";
+			reg = <0x2003a000 0x100>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_gates1 1>, <&clk_gates7 8>;
+			clock-names = "timer", "pclk";
+		};
+
+		timer@2000e000 {
+			compatible = "snps,dw-apb-timer-osc";
+			reg = <0x2000e000 0x100>;
+			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_gates1 2>, <&clk_gates7 9>;
+			clock-names = "timer", "pclk";
+		};
+
+		pinctrl@20008000 {
+			compatible = "rockchip,rk3066a-pinctrl";
+			reg = <0x20008000 0x150>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			gpio0: gpio0@20034000 {
+				compatible = "rockchip,gpio-bank";
+				reg = <0x20034000 0x100>;
+				interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk_gates8 9>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio1: gpio1@2003c000 {
+				compatible = "rockchip,gpio-bank";
+				reg = <0x2003c000 0x100>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk_gates8 10>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio2@2003e000 {
+				compatible = "rockchip,gpio-bank";
+				reg = <0x2003e000 0x100>;
+				interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk_gates8 11>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio3: gpio3@20080000 {
+				compatible = "rockchip,gpio-bank";
+				reg = <0x20080000 0x100>;
+				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk_gates8 12>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio4: gpio4@20084000 {
+				compatible = "rockchip,gpio-bank";
+				reg = <0x20084000 0x100>;
+				interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk_gates8 13>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio6: gpio6@2000a000 {
+				compatible = "rockchip,gpio-bank";
+				reg = <0x2000a000 0x100>;
+				interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk_gates8 15>;
+
+				gpio-controller;
+				#gpio-cells = <2>;
+
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			pcfg_pull_default: pcfg_pull_default {
+				bias-pull-pin-default;
+			};
+
+			pcfg_pull_none: pcfg_pull_none {
+				bias-disable;
+			};
+
+			uart0 {
+				uart0_xfer: uart0-xfer {
+					rockchip,pins = <RK_GPIO1 0 RK_FUNC_1 &pcfg_pull_default>,
+							<RK_GPIO1 1 RK_FUNC_1 &pcfg_pull_default>;
+					rockchip,config = <&pcfg_pull_default>;
+				};
+
+				uart0_cts: uart0-cts {
+					rockchip,pins = <RK_GPIO1 2 RK_FUNC_1 &pcfg_pull_default>;
+					rockchip,config = <&pcfg_pull_default>;
+				};
+
+				uart0_rts: uart0-rts {
+					rockchip,pins = <RK_GPIO1 3 RK_FUNC_1 &pcfg_pull_default>;
+					rockchip,config = <&pcfg_pull_default>;
+				};
+			};
+
+			uart1 {
+				uart1_xfer: uart1-xfer {
+					rockchip,pins = <RK_GPIO1 4 RK_FUNC_1 &pcfg_pull_default>,
+							<RK_GPIO1 5 RK_FUNC_1 &pcfg_pull_default>;
+					rockchip,config = <&pcfg_pull_default>;
+				};
+
+				uart1_cts: uart1-cts {
+					rockchip,pins = <RK_GPIO1 6 RK_FUNC_1 &pcfg_pull_default>;
+					rockchip,config = <&pcfg_pull_default>;
+				};
+
+				uart1_rts: uart1-rts {
+					rockchip,pins = <RK_GPIO1 7 RK_FUNC_1 &pcfg_pull_default>;
+					rockchip,config = <&pcfg_pull_default>;
+				};
+			};
+
+			uart2 {
+				uart2_xfer: uart2-xfer {
+					rockchip,pins = <RK_GPIO1 8 RK_FUNC_1 &pcfg_pull_default>,
+							<RK_GPIO1 9 RK_FUNC_1 &pcfg_pull_default>;
+					rockchip,config = <&pcfg_pull_default>;
+				};
+				/* no rts / cts for uart2 */
+			};
+
+			uart3 {
+				uart3_xfer: uart3-xfer {
+					rockchip,pins = <RK_GPIO3 27 RK_FUNC_1 &pcfg_pull_default>,
+							<RK_GPIO3 28 RK_FUNC_1 &pcfg_pull_default>;
+					rockchip,config = <&pcfg_pull_default>;
+				};
+
+				uart3_cts: uart3-cts {
+					rockchip,pins = <RK_GPIO3 29 RK_FUNC_1 &pcfg_pull_default>;
+					rockchip,config = <&pcfg_pull_default>;
+				};
+
+				uart3_rts: uart3-rts {
+					rockchip,pins = <RK_GPIO3 30 RK_FUNC_1 &pcfg_pull_default>;
+					rockchip,config = <&pcfg_pull_default>;
+				};
+			};
+
+			sd0 {
+				sd0_clk: sd0-clk {
+					rockchip,pins = <RK_GPIO3 8 RK_FUNC_1 &pcfg_pull_default>;
+					rockchip,config = <&pcfg_pull_default>;
+				};
+
+				sd0_cmd: sd0-cmd {
+					rockchip,pins = <RK_GPIO3 9 RK_FUNC_1 &pcfg_pull_default>;
+					rockchip,config = <&pcfg_pull_default>;
+				};
+
+				sd0_cd: sd0-cd {
+					rockchip,pins = <RK_GPIO3 14 RK_FUNC_1 &pcfg_pull_default>;
+					rockchip,config = <&pcfg_pull_default>;
+				};
+
+				sd0_wp: sd0-wp {
+					rockchip,pins = <RK_GPIO3 15 RK_FUNC_1 &pcfg_pull_default>;
+					rockchip,config = <&pcfg_pull_default>;
+				};
+
+				sd0_bus1: sd0-bus-width1 {
+					rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>;
+					rockchip,config = <&pcfg_pull_default>;
+				};
+
+				sd0_bus4: sd0-bus-width4 {
+					rockchip,pins = <RK_GPIO3 10 RK_FUNC_1 &pcfg_pull_default>,
+							<RK_GPIO3 11 RK_FUNC_1 &pcfg_pull_default>,
+							<RK_GPIO3 12 RK_FUNC_1 &pcfg_pull_default>,
+							<RK_GPIO3 13 RK_FUNC_1 &pcfg_pull_default>;
+					rockchip,config = <&pcfg_pull_default>;
+				};
+			};
+
+			sd1 {
+				sd1_clk: sd1-clk {
+					rockchip,pins = <RK_GPIO3 21 RK_FUNC_1 &pcfg_pull_default>;
+					rockchip,config = <&pcfg_pull_default>;
+				};
+
+				sd1_cmd: sd1-cmd {
+					rockchip,pins = <RK_GPIO3 16 RK_FUNC_1 &pcfg_pull_default>;
+					rockchip,config = <&pcfg_pull_default>;
+				};
+
+				sd1_cd: sd1-cd {
+					rockchip,pins = <RK_GPIO3 22 RK_FUNC_1 &pcfg_pull_default>;
+					rockchip,config = <&pcfg_pull_default>;
+				};
+
+				sd1_wp: sd1-wp {
+					rockchip,pins = <RK_GPIO3 23 RK_FUNC_1 &pcfg_pull_default>;
+					rockchip,config = <&pcfg_pull_default>;
+				};
+
+				sd1_bus1: sd1-bus-width1 {
+					rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>;
+					rockchip,config = <&pcfg_pull_default>;
+				};
+
+				sd1_bus4: sd1-bus-width4 {
+					rockchip,pins = <RK_GPIO3 17 RK_FUNC_1 &pcfg_pull_default>,
+							<RK_GPIO3 18 RK_FUNC_1 &pcfg_pull_default>,
+							<RK_GPIO3 19 RK_FUNC_1 &pcfg_pull_default>,
+							<RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_default>;
+					rockchip,config = <&pcfg_pull_default>;
+				};
+			};
+		};
+
+		uart0: serial@10124000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x10124000 0x400>;
+			interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <1>;
+			clocks = <&clk_gates1 8>;
+			status = "disabled";
+		};
+
+		uart1: serial@10126000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x10126000 0x400>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <1>;
+			clocks = <&clk_gates1 10>;
+			status = "disabled";
+		};
+
+		uart2: serial@20064000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x20064000 0x400>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <1>;
+			clocks = <&clk_gates1 12>;
+			status = "disabled";
+		};
+
+		uart3: serial@20068000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x20068000 0x400>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <1>;
+			clocks = <&clk_gates1 14>;
+			status = "disabled";
+		};
+
+		dwmmc@10214000 {
+			compatible = "rockchip,rk2928-dw-mshc";
+			reg = <0x10214000 0x1000>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			clocks = <&clk_gates5 10>, <&clk_gates2 11>;
+			clock-names = "biu", "ciu";
+
+			status = "disabled";
+		};
+
+		dwmmc@10218000 {
+			compatible = "rockchip,rk2928-dw-mshc";
+			reg = <0x10218000 0x1000>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			clocks = <&clk_gates5 11>, <&clk_gates2 13>;
+			clock-names = "biu", "ciu";
+
+			status = "disabled";
+		};
+	};
+};