diff options
author | Daniel Mack <daniel@zonque.org> | 2018-11-30 18:55:43 +0100 |
---|---|---|
committer | Robert Jarzmik <robert.jarzmik@free.fr> | 2018-12-03 22:51:01 +0100 |
commit | ad8044f87c0b53ee45f5d367584eefb222a06883 (patch) | |
tree | fda469cbbe1696329892afd0cdec1bc93c9f7192 /arch/arm/boot/dts/pxa300-raumfeld-common.dtsi | |
parent | c40ad24254f1dbd54f2df5f5f524130dc1862122 (diff) | |
download | linux-ad8044f87c0b53ee45f5d367584eefb222a06883.tar.bz2 |
ARM: dts: pxa3xx: Add Raumfeld DTS files
This patch adds a set of DTS files that support all PXA3xx based Raumfeld
audio hardware devices.
Common nodes are factored out into 'common' and 'tuneable-clock' include
files to keep the top-level DTS files smaller.
Signed-off-by: Daniel Mack <daniel@zonque.org>
[Robert: Reordered Makefile in alphabetical order]
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Diffstat (limited to 'arch/arm/boot/dts/pxa300-raumfeld-common.dtsi')
-rw-r--r-- | arch/arm/boot/dts/pxa300-raumfeld-common.dtsi | 405 |
1 files changed, 405 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi b/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi new file mode 100644 index 000000000000..8ac24e3c8513 --- /dev/null +++ b/arch/arm/boot/dts/pxa300-raumfeld-common.dtsi @@ -0,0 +1,405 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include "pxa3xx.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> + +/ { + /* Will be overridden by bootloader */ + hw-revision = <0>; + + chosen { + bootargs = "root=ubi0:RootFS rootfstype=ubifs rw ubi.mtd=3"; + stdout-path = &ffuart; + }; + + memory { + device_type = "memory"; + reg = <0xa0000000 0x8000000>; /* 128 MB */ + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3-fixed-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "1v8-fixed-supply"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_va_5v0: regulator-va-5v0 { + compatible = "regulator-fixed"; + regulator-name = "va-5v0-fixed-supply"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio 124 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + ssp_dai0: ssp-dai0 { + compatible = "mrvl,pxa-ssp-dai"; + pinctrl-names = "default"; + pinctrl-0 = <&ssp0_dai_pins>; + port = <&ssp1>; + #sound-dai-cells = <0>; + dmas = <&pdma 13 3 + &pdma 14 3>; + dma-names = "rx", "tx"; + clock-names = "extclk"; + }; + + ssp_dai1: ssp-dai1 { + compatible = "mrvl,pxa-ssp-dai"; + pinctrl-names = "default"; + pinctrl-0 = <&ssp1_dai_pins>; + port = <&ssp2>; + #sound-dai-cells = <0>; + dmas = <&pdma 15 3 + &pdma 16 3>; + dma-names = "rx", "tx"; + clock-names = "extclk"; + }; + + spi: spi { + compatible = "spi-gpio"; + #address-cells = <0x1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi_pins>; + gpio-sck = <&gpio 95 GPIO_ACTIVE_HIGH>; + gpio-miso = <&gpio 98 GPIO_ACTIVE_HIGH>; + gpio-mosi = <&gpio 97 GPIO_ACTIVE_HIGH>; + cs-gpios = < + &gpio 34 GPIO_ACTIVE_HIGH + &gpio 125 GPIO_ACTIVE_HIGH + &gpio 96 GPIO_ACTIVE_HIGH + >; + num-chipselects = <3>; + + dac: dac@2 { + compatible = "ti,dac7512"; + reg = <2>; + spi-max-frequency = <1000000>; + vcc-supply = <®_3v3>; + }; + }; + + keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_keys_pins>; + + on-off { + label = "on_off button"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + linux,code = <KEY_F6>; + }; + + rescue-boot { + label = "rescue boot button"; + gpios = <&gpio 115 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_F4>; + }; + + setup { + label = "setup"; + gpios = <&gpio 119 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_F3>; + }; + }; + + rotary: rotary-encoder { + compatible = "rotary-encoder"; + gpios = < + &gpio 19 GPIO_ACTIVE_LOW + &gpio 20 GPIO_ACTIVE_HIGH + >; + linux,axis = <REL_X>; + rotary-encoder,relative-axis; + }; + + leds: leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_a &led_pins_b>; + + left { + label = "raumfeld:1"; + gpios = <&gpio 36 GPIO_ACTIVE_LOW>; + }; + + right { + label = "raumfeld:2"; + gpios = <&gpio 35 GPIO_ACTIVE_HIGH>; + }; + }; + + poweroff { + compatible = "gpio-poweroff"; + pinctrl-names = "default"; + pinctrl-0 = <&poweroff_pins>; + gpios = <&gpio 16 GPIO_ACTIVE_HIGH>; + }; + + mmc0_pwrseq: mmc-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pwrseq_pins>; + reset-gpios = < + &gpio 113 GPIO_ACTIVE_LOW /* W2W_RESET */ + &gpio 114 GPIO_ACTIVE_LOW /* W2W_PDN */ + >; + }; + + ethernet: ethernet@10000000 { + compatible = "smsc,lan9115"; + pinctrl-names = "default"; + pinctrl-0 = <&smsc_pins &smsc_bus_pins>; + reg = <0x10000000 0x100000>; + phy-mode = "mii"; + interrupt-parent = <&gpio>; + interrupts = <40 IRQ_TYPE_EDGE_FALLING>; + vdd33a-supply = <®_3v3>; + vddvario-supply = <®_1v8>; + reset-gpios = <&gpio 39 GPIO_ACTIVE_LOW>; + reg-io-width = <4>; + smsc,save-mac-address; + smsc,irq-push-pull; + }; +}; + +&ffuart { + status = "okay"; +}; + +&pwri2c { + status = "okay"; + + max8660: regulator@34 { + compatible = "maxim,max8660"; + reg = <0x34>; + + regulators { + regulator-v3 { + regulator-compatible= "V3(DCDC)"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1800000>; + }; + + regulator-v4 { + regulator-compatible= "V4(DCDC)"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1800000>; + }; + + regulator-v5 { + regulator-compatible= "V5(LDO)"; + regulator-min-microvolt = <1700000>; + regulator-max-microvolt = <2000000>; + }; + + reg_vcc_sdio: regulator-v6 { + regulator-compatible= "V6(LDO)"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + regulator-v7 { + regulator-compatible= "V7(LDO)"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; +}; + +&pxai2c1 { + status = "okay"; + mrvl,i2c-fast-mode; + pinctrl-names = "default"; + pinctrl-0 = <&pxai2c1_pins>; +}; + +&ssp1 { + status = "okay"; +}; + +&ssp2 { + status = "okay"; +}; + +&nand_controller { + status = "okay"; + + nand@0 { + reg = <0>; + nand-rb = <0>; + nand-ecc-mode = "hw"; + marvell,nand-keep-config; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "Bootloader"; + reg = <0x0000000 0xa0000>; + read-only; + }; + + partition@a0000 { + label = "BootloaderEnvironment"; + reg = <0x0a0000 0x20000>; + }; + + partition@c0000 { + label = "BootloaderSplashScreen"; + reg = <0x0c0000 0x60000>; + }; + + partition@120000 { + label = "UBI"; + reg = <0x120000 0x7ee0000>; + }; + }; + }; +}; + +&usb0 { + status = "okay"; + marvell,enable-port1; + marvell,port-mode = <2>; /* PMM_GLOBAL_MODE */ + pinctrl-names = "default"; + pinctrl-0 = <&pxa3xx_ohci_pins>; +}; + +&mmc0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + pxa-mmc,detect-delay-ms = <200>; + vmmc-supply = <®_vcc_sdio>; + mmc-pwrseq = <&mmc0_pwrseq>; + non-removable; + bus-width = <4>; +}; + +&pinctrl { + poweroff_pins: poweroff-pins { + pinctrl-single,pins = <MFP_PIN_PXA300(16) MFP_AF0>; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT); + }; + + led_pins_a: led-pins-a { + pinctrl-single,pins = <MFP_PIN_PXA300(35) MFP_AF0>; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW); + }; + + led_pins_b: led-pins-b { + pinctrl-single,pins = <MFP_PIN_PXA300(36) MFP_AF0>; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_DRIVE_HIGH); + }; + + pxai2c1_pins: pxai2c1-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(21) MFP_AF1 /* I2C_SCL */ + MFP_PIN_PXA300(22) MFP_AF1 /* I2C_SDA */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_HIGH); + }; + + gpio_keys_pins: gpio-keys-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(14) MFP_AF0 /* SCK */ + MFP_PIN_PXA300(115) MFP_AF0 /* MOSI */ + MFP_PIN_PXA300(119) MFP_AF0 /* MISO */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT); + }; + + spi_pins: spi-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(95) MFP_AF0 /* SCK */ + MFP_PIN_PXA300(97) MFP_AF0 /* MOSI */ + MFP_PIN_PXA300(98) MFP_AF0 /* MISO */ + MFP_PIN_PXA300(34) MFP_AF0 /* CS#0 */ + MFP_PIN_PXA300(125) MFP_AF0 /* CS#1 */ + MFP_PIN_PXA300(96) MFP_AF0 /* CS#2 */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW); + }; + + pxa3xx_ohci_pins: pxa3xx-ohci-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300_2(0) MFP_AF1 /* USBHPEN */ + MFP_PIN_PXA300_2(1) MFP_AF1 /* USBHPWR */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW); + }; + + smsc_pins: smsc-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(39) MFP_AF0 /* RESET */ + MFP_PIN_PXA300(40) MFP_AF0 /* IRQ */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW); + }; + + smsc_bus_pins: smsc-bus-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(1) MFP_AF1 /* nCS2 */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT); + }; + + mmc0_pins: mmc0-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(3) MFP_AF4 /* MMC1_DAT0 */ + MFP_PIN_PXA300(4) MFP_AF4 /* MMC1_DAT1 */ + MFP_PIN_PXA300(5) MFP_AF4 /* MMC1_DAT2 */ + MFP_PIN_PXA300(6) MFP_AF4 /* MMC1_DAT3 */ + MFP_PIN_PXA300(7) MFP_AF4 /* MMC1_CLK */ + MFP_PIN_PXA300(8) MFP_AF4 /* MMC1_CMD */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_DRIVE_HIGH); + }; + + mmc0_pwrseq_pins: mmc0-pwrseq-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(113) MFP_AF0 /* W2W_RESET */ + MFP_PIN_PXA300(114) MFP_AF0 /* W2W_PDN */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_FLOAT); + }; + + ssp0_dai_pins: ssp0-dai-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(85) MFP_AF1 /* SSP1_SCLK */ + MFP_PIN_PXA300(86) MFP_AF1 /* SSP1_FRM */ + MFP_PIN_PXA300(87) MFP_AF1 /* SSP1_TXD */ + MFP_PIN_PXA300(88) MFP_AF1 /* SSP1_RXD */ + MFP_PIN_PXA300(89) MFP_AF1 /* SSP1_EXTCLK */ + MFP_PIN_PXA300(90) MFP_AF1 /* SSP1_SYSCLK */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW); + }; + + ssp1_dai_pins: ssp1-dai-pins { + pinctrl-single,pins = < + MFP_PIN_PXA300(25) MFP_AF2 /* SSP2_SCLK */ + MFP_PIN_PXA300(26) MFP_AF2 /* SSP2_FRM */ + MFP_PIN_PXA300(27) MFP_AF2 /* SSP2_TXD */ + MFP_PIN_PXA300(29) MFP_AF2 /* SSP2_EXTCLK */ + >; + pinctrl-single,low-power-mode = MFP_LPM(MFP_LPM_PULL_LOW); + }; +}; |