diff options
author | Arnd Bergmann <arnd@arndb.de> | 2015-04-14 01:03:29 +0200 |
---|---|---|
committer | Arnd Bergmann <arnd@arndb.de> | 2015-04-14 01:03:29 +0200 |
commit | 643ee0d50a7392671c0488912cdbb37549ac4cc7 (patch) | |
tree | c6264bd7ca5139f4f0183d12b0732bc96347b90f /arch/arm/boot/dts/omap4.dtsi | |
parent | 13a7a6ac0a11197edcd0f756a035f472b42cdf8b (diff) | |
parent | 21295368367beaa563b310d5492166dba158b884 (diff) | |
download | linux-643ee0d50a7392671c0488912cdbb37549ac4cc7.tar.bz2 |
Merge tag 'omap-for-v4.1/prcm-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/late
Pull "Clean-up for omap PRCM (Power Reset Clock Management) and interconnects" from Tony Lindgren
Patches originally from Tero Kristo <t-kristo@ti.com>.
This sets gets us into a better position for further clean-up:
- Gets PRCM code closer to being device drivers
- Allows to move the remainig clock code to drivers/clk for v4.2
- Starts enforcing interconnect hierarchy in the SoC specific .dts
files to enforce device drivers are only accesing registers in
the related hardware module
This patchset has seen quite a few revisions but did not come into
mergeable shape until recently. As other patchsets for clock specific
device drivers depend on this, it would be good to get this merged
although it's a bit late for the v4.1 merge window.
Note that as the device entries in the .dts files are moved around,
this is based on earlier non-urgent fixes to avoid a non-trivial
merge conflict.
* tag 'omap-for-v4.1/prcm-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (44 commits)
ARM: OMAP4+: control: add support for initializing control module via DT
ARM: dts: dra7: add minimal l4 bus layout with control module support
ARM: dts: omap5: add minimal l4 bus layout with control module support
ARM: OMAP4+: control: remove support for legacy pad read/write
ARM: OMAP4: display: convert display to use syscon for dsi muxing
ARM: dts: omap4: add minimal l4 bus layout with control module support
ARM: dts: am4372: add minimal l4 bus layout with control module support
ARM: dts: am43xx-epos-evm: fix pinmux node layout
ARM: dts: am33xx: add minimal l4 bus layout with control module support
ARM: dts: omap3: add minimal l4 bus layout with control module support
ARM: dts: omap24xx: add minimal l4 bus layout with control module support
ARM: OMAP2+: control: add syscon support for register accesses
ARM: OMAP2+: id: cache omap_type value
ARM: OMAP2+: control: remove API for getting control module base address
ARM: OMAP2+: clock: add low-level support for regmap
ARM: OMAP4+: PRM: get rid of cpu_is_omap44xx calls from interrupt init
ARM: OMAP4+: PRM: setup prm_features from the PRM init time flags
ARM: OMAP2+: CM: move SoC specific init calls within a generic API
ARM: OMAP4+: PRM: determine prm_device_inst based on DT compatibility
ARM: OMAP2+: PRM: move SoC specific init calls within a generic API
...
Diffstat (limited to 'arch/arm/boot/dts/omap4.dtsi')
-rw-r--r-- | arch/arm/boot/dts/omap4.dtsi | 200 |
1 files changed, 121 insertions, 79 deletions
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 87401d9f4d8b..cf2681b2d173 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -114,99 +114,141 @@ interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; - cm1: cm1@4a004000 { - compatible = "ti,omap4-cm1"; - reg = <0x4a004000 0x2000>; - - cm1_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; - }; + l4_cfg: l4@4a000000 { + compatible = "ti,omap4-l4-cfg", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x4a000000 0x1000000>; - cm1_clockdomains: clockdomains { - }; - }; + cm1: cm1@4000 { + compatible = "ti,omap4-cm1"; + reg = <0x4000 0x2000>; - prm: prm@4a306000 { - compatible = "ti,omap4-prm"; - reg = <0x4a306000 0x3000>; - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + cm1_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; - prm_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; + cm1_clockdomains: clockdomains { + }; }; - prm_clockdomains: clockdomains { - }; - }; + cm2: cm2@8000 { + compatible = "ti,omap4-cm2"; + reg = <0x8000 0x3000>; - cm2: cm2@4a008000 { - compatible = "ti,omap4-cm2"; - reg = <0x4a008000 0x3000>; + cm2_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; - cm2_clocks: clocks { - #address-cells = <1>; - #size-cells = <0>; + cm2_clockdomains: clockdomains { + }; }; - cm2_clockdomains: clockdomains { + omap4_scm_core: scm@2000 { + compatible = "ti,omap4-scm-core", "simple-bus"; + reg = <0x2000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2000 0x1000>; + + scm_conf: scm_conf@0 { + compatible = "syscon"; + reg = <0x0 0x800>; + #address-cells = <1>; + #size-cells = <1>; + }; }; - }; - - scrm: scrm@4a30a000 { - compatible = "ti,omap4-scrm"; - reg = <0x4a30a000 0x2000>; - scrm_clocks: clocks { + omap4_padconf_core: scm@100000 { + compatible = "ti,omap4-scm-padconf-core", + "simple-bus"; #address-cells = <1>; - #size-cells = <0>; + #size-cells = <1>; + ranges = <0 0x100000 0x1000>; + + omap4_pmx_core: pinmux@40 { + compatible = "ti,omap4-padconf", + "pinctrl-single"; + reg = <0x40 0x0196>; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; + }; + + omap4_padconf_global: omap4_padconf_global@5a0 { + compatible = "syscon"; + reg = <0x5a0 0x170>; + #address-cells = <1>; + #size-cells = <1>; + + pbias_regulator: pbias_regulator { + compatible = "ti,pbias-omap"; + reg = <0x60 0x4>; + syscon = <&omap4_padconf_global>; + pbias_mmc_reg: pbias_mmc_omap4 { + regulator-name = "pbias_mmc_omap4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + }; + }; }; - scrm_clockdomains: clockdomains { - }; - }; - - counter32k: counter@4a304000 { - compatible = "ti,omap-counter32k"; - reg = <0x4a304000 0x20>; - ti,hwmods = "counter_32k"; - }; - - omap4_pmx_core: pinmux@4a100040 { - compatible = "ti,omap4-padconf", "pinctrl-single"; - reg = <0x4a100040 0x0196>; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0x7fff>; - }; - omap4_pmx_wkup: pinmux@4a31e040 { - compatible = "ti,omap4-padconf", "pinctrl-single"; - reg = <0x4a31e040 0x0038>; - #address-cells = <1>; - #size-cells = <0>; - #interrupt-cells = <1>; - interrupt-controller; - pinctrl-single,register-width = <16>; - pinctrl-single,function-mask = <0x7fff>; - }; - - omap4_padconf_global: tisyscon@4a1005a0 { - compatible = "syscon"; - reg = <0x4a1005a0 0x170>; - }; - - pbias_regulator: pbias_regulator { - compatible = "ti,pbias-omap"; - reg = <0x60 0x4>; - syscon = <&omap4_padconf_global>; - pbias_mmc_reg: pbias_mmc_omap4 { - regulator-name = "pbias_mmc_omap4"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; + l4_wkup: l4@300000 { + compatible = "ti,omap4-l4-wkup", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x300000 0x40000>; + + counter32k: counter@4000 { + compatible = "ti,omap-counter32k"; + reg = <0x4000 0x20>; + ti,hwmods = "counter_32k"; + }; + + prm: prm@6000 { + compatible = "ti,omap4-prm"; + reg = <0x6000 0x3000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + + prm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + prm_clockdomains: clockdomains { + }; + }; + + scrm: scrm@a000 { + compatible = "ti,omap4-scrm"; + reg = <0xa000 0x2000>; + + scrm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + scrm_clockdomains: clockdomains { + }; + }; + + omap4_pmx_wkup: pinmux@1e040 { + compatible = "ti,omap4-padconf", + "pinctrl-single"; + reg = <0x1e040 0x0038>; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; + }; }; }; |