diff options
author | Linus Walleij <linus.walleij@linaro.org> | 2019-01-27 14:11:41 +0100 |
---|---|---|
committer | Linus Walleij <linus.walleij@linaro.org> | 2019-04-23 16:02:15 +0200 |
commit | b9a35d705a6780b5b89121e685c3e43c9ffa34f8 (patch) | |
tree | 694131153e11cb407dd6f27015a5b37a30c9caa4 /arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts | |
parent | 9540724ca29d54b65aaea120072166ebc2d5f4a1 (diff) | |
download | linux-b9a35d705a6780b5b89121e685c3e43c9ffa34f8.tar.bz2 |
ARM: dts: Add some initial IXP4xx device trees
This adds a device tree for the IXP4xx-based Linksys
NSLU2 and Gateworks GW2358 which encompass the Gateworks
Cambria family.
These will be the first IXP4xx device tree platforms.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts')
-rw-r--r-- | arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts | 94 |
1 files changed, 94 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts b/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts new file mode 100644 index 000000000000..ba1163a1e1e7 --- /dev/null +++ b/arch/arm/boot/dts/intel-ixp43x-gateworks-gw2358.dts @@ -0,0 +1,94 @@ +// SPDX-License-Identifier: ISC +/* + * Device Tree file for Gateworks IXP43x-based Cambria GW2358 + */ + +/dts-v1/; + +#include "intel-ixp43x.dtsi" + +/ { + model = "Gateworks Cambria GW2358"; + compatible = "gateworks,gw2358", "intel,ixp43x"; + #address-cells = <1>; + #size-cells = <1>; + + memory@0 { + /* 128 MB SDRAM */ + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 root=/dev/mtdblock2 rw rootfstype=squashfs,jffs2 rootwait"; + stdout-path = "uart0:115200n8"; + }; + + aliases { + serial0 = &uart0; + }; + + leds { + compatible = "gpio-leds"; + led-user { + label = "gw2358:green:LED"; + gpios = <&pld1 0 GPIO_ACTIVE_LOW>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + }; + + + i2c { + compatible = "i2c-gpio"; + sda-gpios = <&gpio0 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&gpio0 6 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + #address-cells = <1>; + #size-cells = <0>; + + hwmon@28 { + compatible = "adi,ad7418"; + reg = <0x28>; + }; + rtc: ds1672@68 { + compatible = "dallas,ds1672"; + reg = <0x68>; + }; + eeprom@51 { + compatible = "atmel,24c08"; + reg = <0x51>; + pagesize = <16>; + size = <1024>; + read-only; + }; + pld0: pld@56 { + compatible = "gateworks,pld-gpio"; + reg = <0x56>; + gpio-controller; + #gpio-cells = <2>; + }; + /* This PLD just handles the LED and user button */ + pld1: pld@57 { + compatible = "gateworks,pld-gpio"; + reg = <0x57>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + + flash@50000000 { + compatible = "intel,ixp4xx-flash", "cfi-flash"; + bank-width = <2>; + /* + * 32 MB of Flash in 0x20000 byte blocks + * mapped in at 0x50000000 + */ + reg = <0x50000000 0x2000000>; + + partitions { + compatible = "redboot-fis"; + /* Eraseblock at 0x1fe0000 */ + fis-index-block = <0xff>; + }; + }; +}; |