diff options
author | Stefan Agner <stefan@agner.ch> | 2017-12-19 19:10:30 +0100 |
---|---|---|
committer | Shawn Guo <shawnguo@kernel.org> | 2017-12-26 16:15:44 +0800 |
commit | 7e81cb3d9cf5a7cc56606a63ca6f100bb3f1f5de (patch) | |
tree | 65a3c73a1ff280343c719bc0e76ca7349b864846 /arch/arm/boot/dts/imx7d-colibri-eval-v3.dts | |
parent | 4d9a3877646c40180cb2d5e1943c8e94c91c93a4 (diff) | |
download | linux-7e81cb3d9cf5a7cc56606a63ca6f100bb3f1f5de.tar.bz2 |
ARM: dts: imx7-colibri: move and rename USB Host power regulator
The Colibri default which enables USB Host power is not necessarily
tied to the OTG2 controller, some carrier board use the pin to
control USB power for both controllers. Hence name the pinctrl
group more generic.
Also move the regulator to the generic eval-v3 device tree since
the regulator is always on the carrier board. In the Colibri iMX7S
case the regulator is just not used. This allows to reuse the
regulator in a upcoming SKU Colibri iMX7D 1GB with eMMC.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Diffstat (limited to 'arch/arm/boot/dts/imx7d-colibri-eval-v3.dts')
-rw-r--r-- | arch/arm/boot/dts/imx7d-colibri-eval-v3.dts | 13 |
1 files changed, 1 insertions, 12 deletions
diff --git a/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts index a608a14d8c85..136e11ab4893 100644 --- a/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/imx7d-colibri-eval-v3.dts @@ -48,20 +48,9 @@ model = "Toradex Colibri iMX7D on Colibri Evaluation Board V3"; compatible = "toradex,colibri-imx7d-eval-v3", "toradex,colibri-imx7d", "fsl,imx7d"; - - reg_usb_otg2_vbus: regulator-usb-otg2-vbus { - compatible = "regulator-fixed"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usbotg2_reg>; - regulator-name = "VCC_USB[1-4]"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio4 7 GPIO_ACTIVE_LOW>; - vin-supply = <®_5v0>; - }; }; &usbotg2 { - vbus-supply = <®_usb_otg2_vbus>; + vbus-supply = <®_usbh_vbus>; status = "okay"; }; |