diff options
author | Fabio Estevam <fabio.estevam@freescale.com> | 2015-04-30 19:55:29 -0300 |
---|---|---|
committer | Shawn Guo <shawn.guo@linaro.org> | 2015-06-03 15:03:58 +0800 |
commit | d000d5e12938886ee7eb4f93f1dda9655ec0051a (patch) | |
tree | dab18067d868212d2bbba5642783745961dbadee /arch/arm/boot/dts/imx6sl-warp.dts | |
parent | e6c8b3d49c0b602875a6e8b2b22a2002326d64a4 (diff) | |
download | linux-d000d5e12938886ee7eb4f93f1dda9655ec0051a.tar.bz2 |
ARM: dts: imx6sl-warp: Remove USB regulators
According to the warp schematics there are no regulators for the USB OTG
ports, so let's remove them.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Diffstat (limited to 'arch/arm/boot/dts/imx6sl-warp.dts')
-rw-r--r-- | arch/arm/boot/dts/imx6sl-warp.dts | 28 |
1 files changed, 0 insertions, 28 deletions
diff --git a/arch/arm/boot/dts/imx6sl-warp.dts b/arch/arm/boot/dts/imx6sl-warp.dts index 232597a59122..cec189a16352 100644 --- a/arch/arm/boot/dts/imx6sl-warp.dts +++ b/arch/arm/boot/dts/imx6sl-warp.dts @@ -58,32 +58,6 @@ reg = <0x80000000 0x20000000>; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_usb_otg1_vbus: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "usb_otg1_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio4 0 0>; - enable-active-high; - }; - - reg_usb_otg2_vbus: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "usb_otg2_vbus"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - gpio = <&gpio4 2 0>; - enable-active-high; - }; - }; - usdhc3_pwrseq: usdhc3_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&gpio4 5 GPIO_ACTIVE_LOW>, /* WL_REG_ON */ @@ -113,14 +87,12 @@ }; &usbotg1 { - vbus-supply = <®_usb_otg1_vbus>; dr_mode = "host"; disable-over-current; status = "okay"; }; &usbotg2 { - vbus-supply = <®_usb_otg2_vbus>; disable-over-current; status = "okay"; }; |