diff options
author | Andrew Lunn <andrew@lunn.ch> | 2017-07-17 22:25:00 +0200 |
---|---|---|
committer | Shawn Guo <shawnguo@kernel.org> | 2017-07-25 17:04:23 +0800 |
commit | efb0e487b0d34133b020da379faa9b02b56376e7 (patch) | |
tree | 73659a9ff85040f159649a0c542dd63638ada893 /arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | |
parent | 5eaeaccdaedb5f84e3d48a3b1b551bc9c5aaf704 (diff) | |
download | linux-efb0e487b0d34133b020da379faa9b02b56376e7.tar.bz2 |
ARM: dts: imx6: RDU2: Add Micrel PHY to FEC
The FEC has a Micrel PHY connected to it. This PHY is managed using
the bit-banging MDIO bus. Add this to the device tree.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Chris Healy <cphealy@gmail.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Diffstat (limited to 'arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi')
-rw-r--r-- | arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 10 |
1 files changed, 5 insertions, 5 deletions
diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi index 5d94b5ee6aa0..d7328e9166e9 100644 --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi @@ -59,6 +59,10 @@ pinctrl-0 = <&pinctrl_mdio1>; gpios = <&gpio6 5 GPIO_ACTIVE_HIGH &gpio6 4 GPIO_ACTIVE_HIGH>; + + phy: ethernet-phy@0 { + reg = <0>; + }; }; reg_28p0v: regulator-28p0v { @@ -615,15 +619,11 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; phy-mode = "rmii"; + phy-handle = <&phy>; phy-reset-gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; phy-reset-duration = <100>; phy-supply = <®_3p3v>; status = "okay"; - - fixed-link { - speed = <100>; - full-duplex; - }; }; &usbh1 { |