diff options
author | Lucas Stach <l.stach@pengutronix.de> | 2018-11-05 18:31:56 +0100 |
---|---|---|
committer | Shawn Guo <shawnguo@kernel.org> | 2018-11-16 11:01:45 +0800 |
commit | 749a5068f2e2453a38777b1d5fc322d503cabf1d (patch) | |
tree | ddb00f4d5b33327a440969c4fd9ba1c31d53d67f /arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | |
parent | 381aafc016f072af3602deeec4bb7b3e1194a8b1 (diff) | |
download | linux-749a5068f2e2453a38777b1d5fc322d503cabf1d.tar.bz2 |
ARM: dts: imx6: RDU2: fix eGalax touchscreen node
Use the correct compatible for the new protocol used by the firmware
on the touch controller, the GPIO wakeup isn't used in that case.
Also eGalax touch needs axis swapping, just as with the RMI4 touch.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Diffstat (limited to 'arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi')
-rw-r--r-- | arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 5 |
1 files changed, 3 insertions, 2 deletions
diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi index 85e79a33bcd4..69942c7ff89d 100644 --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi @@ -609,13 +609,14 @@ }; touchscreen@2a { - compatible = "eeti,egalax_ts"; + compatible = "eeti,exc3000"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ts>; reg = <0x2a>; interrupt-parent = <&gpio1>; interrupts = <8 IRQ_TYPE_LEVEL_LOW>; - wakeup-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + touchscreen-inverted-x; + touchscreen-swapped-x-y; status = "disabled"; }; |