diff options
| author | Andrew F. Davis <afd@ti.com> | 2019-03-29 13:13:10 -0500 |
|---|---|---|
| committer | Shawn Guo <shawnguo@kernel.org> | 2019-04-11 10:40:28 +0800 |
| commit | 1268d8339ca46e3a5c642b38baa1512a19378af4 (patch) | |
| tree | 87358bfb63d3a15e58a06bb1c0875bc4a8cea28c /arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | |
| parent | b7b4fda2636296471e29b78c2aa9535d7bedb7a0 (diff) | |
| download | linux-1268d8339ca46e3a5c642b38baa1512a19378af4.tar.bz2 | |
ARM: dts: mx6qdl-zii-rdu2: Use new CODEC reset pin name
The correct DT property for specifying a GPIO used for reset
is "reset-gpios", the driver now accepts this name, use it here.
Note the GPIO polarity in the driver was ignored before and always
assumed to be active low, when all the DTs are fixed we will start
respecting the specified polarity. Switch polarity in DT to the
currently assumed one, this way when the driver changes the
behavior will not change.
Signed-off-by: Andrew F. Davis <afd@ti.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Diffstat (limited to 'arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi index 9f664897bf4e..7fa989ec403b 100644 --- a/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi +++ b/arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi @@ -385,7 +385,7 @@ AVDD-supply = <®_3p3v>; IOVDD-supply = <®_3p3v>; DVDD-supply = <&vgen4_reg>; - gpio-reset = <&gpio1 2 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; }; accel@1c { @@ -578,7 +578,7 @@ AVDD-supply = <®_3p3v>; IOVDD-supply = <®_3p3v>; DVDD-supply = <&vgen4_reg>; - gpio-reset = <&gpio1 0 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>; }; touchscreen@20 { |