diff options
author | Tim Harvey <tharvey@gateworks.com> | 2015-06-29 20:08:56 +0800 |
---|---|---|
committer | Shawn Guo <shawnguo@kernel.org> | 2015-07-15 10:20:33 +0800 |
commit | 3ee12d8079a5996f3c85e0890d76c0fcb1749bab (patch) | |
tree | 712cb7d90d68c31ee0b818e2c55c5b885f1b136d /arch/arm/boot/dts/imx6qdl-gw51xx.dtsi | |
parent | 366c595f1381b89c52153f753a6499c349410a02 (diff) | |
download | linux-3ee12d8079a5996f3c85e0890d76c0fcb1749bab.tar.bz2 |
ARM: dts: ventana: add UHS-I support for Ventana boards
UHS-I support is available on Ventana boards with micro-SD sockets depending
on the board revision. To support this pinctl states for 100Mhz and 200MHz
must be added as well as pinmux of the VSELECT signal. In order to support
UHS-I the I/O rail of the 4-bit data bus must be switchable between 1.8V
and 3.3V.
By adding the no-1-8-v property, which disables UHS-I support, we allow the
bootloader to be in charge of selecting which boards have this capability
by removing that property if the board model/revision implement the support.
Additionally we will remove NANDF_CS1 here from the nand pinmux group as the
second chip-select is not used on any ventana boards and this is the pad
that is used for SD3_VELECT.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Diffstat (limited to 'arch/arm/boot/dts/imx6qdl-gw51xx.dtsi')
-rw-r--r-- | arch/arm/boot/dts/imx6qdl-gw51xx.dtsi | 1 |
1 files changed, 0 insertions, 1 deletions
diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi index f2867c4b34a8..7b31fdb79ced 100644 --- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi @@ -248,7 +248,6 @@ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 - MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 |