diff options
author | Stefan Wahren <stefan.wahren@i2se.com> | 2016-11-16 17:52:06 +0000 |
---|---|---|
committer | Eric Anholt <eric@anholt.net> | 2016-11-16 13:54:30 -0800 |
commit | 6b9170887e1b912b657dab4597f8b44ae4dbdf50 (patch) | |
tree | 88aa2dbfd02a7cf59b12d27bdedfdc4907af55f1 /arch/arm/boot/dts/bcm2835-rpi-b.dts | |
parent | 731b26a6ac17f24057c559361c6d0cb7cb79baed (diff) | |
download | linux-6b9170887e1b912b657dab4597f8b44ae4dbdf50.tar.bz2 |
ARM: bcm2835: Fix names for the Raspberry Pi GPIO lines
There are some differences between the schematics and the official firmware
DTS [1]. So based on these additional information the following has been
changed:
* use consistent "CAM_GPIO1" for camera LED
* use consistent "CAM_GPIO0" for camera shutdown
* add "USB_LIMIT" for USB current limit (0=600mA, 1=1200mA)
[1] - https://github.com/raspberrypi/firmware/blob/master/extra/dt-blob.dts
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Diffstat (limited to 'arch/arm/boot/dts/bcm2835-rpi-b.dts')
-rw-r--r-- | arch/arm/boot/dts/bcm2835-rpi-b.dts | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts index 71f50e16c646..4d56fe3006b0 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts @@ -30,7 +30,7 @@ "SDA1", "SCL1", "GPIO_GCLK", - "CAM_CLK", + "CAM_GPIO1", "LAN_RUN", "SPI_CE1_N", "SPI_CE0_N", @@ -53,7 +53,7 @@ "GPIO24", "GPIO25", "NC", /* GPIO26 */ - "CAM_GPIO", + "CAM_GPIO0", /* Binary number representing build/revision */ "CONFIG0", "CONFIG1", |