summaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/at91-sama5d2_xplained.dts
diff options
context:
space:
mode:
authorCyrille Pitchen <cyrille.pitchen@atmel.com>2015-06-23 17:51:45 +0200
committerNicolas Ferre <nicolas.ferre@atmel.com>2016-03-02 16:55:16 +0100
commitff964962a0fecc1effc836711defea3954718ce6 (patch)
treef465285ae7ed072a8f8ec37a119d0b2025da292b /arch/arm/boot/dts/at91-sama5d2_xplained.dts
parent28fe80077e154e01a125fa4bf04a2cf755abf335 (diff)
downloadlinux-ff964962a0fecc1effc836711defea3954718ce6.tar.bz2
ARM: dts: at91: sama5d2 Xplained: set pin muxing for usb gadget and usb host
For USB gadget on port A (device mode): - pin PA31 is configured as an input GPIO which triggers an interrupt when vbus is detected on USB port A. - pin PB9 is configured as an output GPIO and set to low level so the board doesn't supply vbus to USB port A. For USB host: - pin PB10 is configured as an output GPIO and is active at high level. The ohci driver will activate this pin so the board supplies vbus to USB port B. - pin PB9 should be configured as an output GPIO and active at high level to use to USB port A in host mode (conflicts with USB gadget). Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Diffstat (limited to 'arch/arm/boot/dts/at91-sama5d2_xplained.dts')
-rw-r--r--arch/arm/boot/dts/at91-sama5d2_xplained.dts21
1 files changed, 21 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index 75341eec2dfd..382ccfb4a2b6 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -46,6 +46,7 @@
#include "sama5d2.dtsi"
#include "sama5d2-pinfunc.h"
#include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "Atmel SAMA5D2 Xplained";
@@ -71,11 +72,20 @@
ahb {
usb0: gadget@00300000 {
+ atmel,vbus-gpio = <&pioA 31 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usba_vbus>;
status = "okay";
};
usb1: ohci@00400000 {
num-ports = <3>;
+ atmel,vbus-gpio = <0 /* &pioA 41 GPIO_ACTIVE_HIGH */
+ &pioA 42 GPIO_ACTIVE_HIGH
+ 0
+ >;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_default>;
status = "okay";
};
@@ -376,6 +386,17 @@
<PIN_PB12__UTXD3>;
bias-disable;
};
+
+ pinctrl_usb_default: usb_default {
+ pinmux = <PIN_PB10__GPIO>;
+ bias-disable;
+ };
+
+ pinctrl_usba_vbus: usba_vbus {
+ pinmux = <PIN_PA31__GPIO>;
+ bias-disable;
+ };
+
};
};
};