Merge branch 'master' into for-2.6.31

Conflicts:
	drivers/block/hd.c
	drivers/block/mg_disk.c

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>

1 files changed, 53 insertions, 8 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e02b893fb909..e60ec54df334 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -454,6 +454,7 @@ config ARCH_MXC
 	select ARCH_MTD_XIP
 	select GENERIC_GPIO
 	select ARCH_REQUIRE_GPIOLIB
+	select HAVE_CLK
 	help
 	  Support for Freescale MXC/iMX-based family of processors
 
@@ -486,8 +487,6 @@ config ARCH_PXA
 	select HAVE_CLK
 	select COMMON_CLKDEV
 	select ARCH_REQUIRE_GPIOLIB
-	select HAVE_CLK
-	select COMMON_CLKDEV
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
 	select TICK_ONESHOT
@@ -585,6 +584,8 @@ config ARCH_DAVINCI
 	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_CLK
 	select ZONE_DMA
+	select HAVE_IDE
+	select COMMON_CLKDEV
 	help
 	  Support for TI's DaVinci platform.
 
@@ -740,6 +741,56 @@ if !MMU
 source "arch/arm/Kconfig-nommu"
 endif
 
+config ARM_ERRATA_411920
+	bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
+	depends on CPU_V6 && !SMP
+	help
+	  Invalidation of the Instruction Cache operation can
+	  fail. This erratum is present in 1136 (before r1p4), 1156 and 1176.
+	  It does not affect the MPCore. This option enables the ARM Ltd.
+	  recommended workaround.
+
+config ARM_ERRATA_430973
+	bool "ARM errata: Stale prediction on replaced interworking branch"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 430973 Cortex-A8
+	  (r1p0..r1p2) erratum. If a code sequence containing an ARM/Thumb
+	  interworking branch is replaced with another code sequence at the
+	  same virtual address, whether due to self-modifying code or virtual
+	  to physical address re-mapping, Cortex-A8 does not recover from the
+	  stale interworking branch prediction. This results in Cortex-A8
+	  executing the new code sequence in the incorrect ARM or Thumb state.
+	  The workaround enables the BTB/BTAC operations by setting ACTLR.IBE
+	  and also flushes the branch target cache at every context switch.
+	  Note that setting specific bits in the ACTLR register may not be
+	  available in non-secure mode.
+
+config ARM_ERRATA_458693
+	bool "ARM errata: Processor deadlock when a false hazard is created"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 458693 Cortex-A8 (r2p0)
+	  erratum. For very specific sequences of memory operations, it is
+	  possible for a hazard condition intended for a cache line to instead
+	  be incorrectly associated with a different cache line. This false
+	  hazard might then cause a processor deadlock. The workaround enables
+	  the L1 caching of the NEON accesses and disables the PLD instruction
+	  in the ACTLR register. Note that setting specific bits in the ACTLR
+	  register may not be available in non-secure mode.
+
+config ARM_ERRATA_460075
+	bool "ARM errata: Data written to the L2 cache can be overwritten with stale data"
+	depends on CPU_V7
+	help
+	  This option enables the workaround for the 460075 Cortex-A8 (r2p0)
+	  erratum. Any asynchronous access to the L2 cache may encounter a
+	  situation in which recent store transactions to the L2 cache are lost
+	  and overwritten with stale memory contents from external memory. The
+	  workaround disables the write-allocate mode for the L2 cache via the
+	  ACTLR register. Note that setting specific bits in the ACTLR register
+	  may not be available in non-secure mode.
+
 endmenu
 
 source "arch/arm/common/Kconfig"
@@ -1171,12 +1222,6 @@ config CPU_FREQ_IMX
 
 	  If in doubt, say N.
 
-config CPU_FREQ_PXA
-	bool
-	depends on CPU_FREQ && ARCH_PXA && PXA25x
-	default y
-	select CPU_FREQ_DEFAULT_GOV_USERSPACE
-
 endif
 
 source "drivers/cpuidle/Kconfig"