diff options
| author | Arnd Bergmann <arnd@arndb.de> | 2021-01-18 14:06:09 +0100 |
|---|---|---|
| committer | Arnd Bergmann <arnd@arndb.de> | 2021-01-20 10:24:19 +0100 |
| commit | 89d4f98ae90d95716009bb89823118a8cfbb94dd (patch) | |
| tree | fa53307722aa9a89f2c40ffe6e282b1b6c73e788 /arch/arm/Kconfig.debug | |
| parent | f3a732843accb04ede91055ffd0b92464fa4d15c (diff) | |
| download | linux-89d4f98ae90d95716009bb89823118a8cfbb94dd.tar.bz2 | |
ARM: remove zte zx platform
The ZTE ZX set-top-box SoC platform was added in 2015 by Jun Nie, with
Baoyou Xie and Shawn Guo subsequently becoming maintainers after the
addition of the 64-bit variant.
However, the only machines that were ever supported upstream are the
reference designs, not actual set-top-box devices that would benefit
from this support. All ZTE set-top-boxes from the past few years seem
to be based on third-party SoCs. While there is very little information
about zx296702 and zx296718 on the web, I found some references to other
chips from the same family, such as zx296716 and zx296719, which were
never submitted for upstream support. Finally, there is no support for
the GPU on either of them, with the lima and panfrost device drivers
having been added after work on the zx platform had stopped.
Shawn confirmed that he has not seen any interest in this platform for
the past four years, and that it can be removed.
Thanks to Jun and Shawn for maintaining this platform over the past
five years.
Cc: Jun Nie <jun.nie@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'arch/arm/Kconfig.debug')
| -rw-r--r-- | arch/arm/Kconfig.debug | 14 |
1 files changed, 0 insertions, 14 deletions
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index fe8b95069d31..543e29068c08 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -1353,18 +1353,6 @@ choice This option selects UART0 on VIA/Wondermedia System-on-a-chip devices, including VT8500, WM8505, WM8650 and WM8850. - config DEBUG_ZTE_ZX - bool "Use ZTE ZX UART" - select DEBUG_UART_PL01X - depends on ARCH_ZX - help - Say Y here if you are enabling ZTE ZX296702 SOC and need - debug uart support. - - This option is preferred over the platform specific - options; the platform specific options are deprecated - and will be soon removed. - config DEBUG_ZYNQ_UART0 bool "Kernel low-level debugging on Xilinx Zynq using UART0" depends on ARCH_ZYNQ @@ -1599,7 +1587,6 @@ config DEBUG_UART_PHYS default 0x02531000 if DEBUG_KEYSTONE_UART1 default 0x03010fe0 if ARCH_RPC default 0x07000000 if DEBUG_SUN9I_UART0 - default 0x09405000 if DEBUG_ZTE_ZX default 0x10009000 if DEBUG_REALVIEW_STD_PORT || \ DEBUG_VEXPRESS_UART0_CA9 default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT @@ -1782,7 +1769,6 @@ config DEBUG_UART_VIRT default 0xfb020000 if DEBUG_OMAP3UART3 default 0xfb042000 if DEBUG_OMAP3UART4 default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT - default 0xfc705000 if DEBUG_ZTE_ZX default 0xfcfe8600 if DEBUG_BCM63XX_UART default 0xfd000000 if DEBUG_SPEAR3XX || DEBUG_SPEAR13XX default 0xfd883000 if DEBUG_ALPINE_UART0 |