diff options
| author | Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> | 2018-10-04 16:12:12 +0300 |
|---|---|---|
| committer | Vineet Gupta <vgupta@synopsys.com> | 2018-11-12 10:38:27 -0800 |
| commit | 3624379d90ad2b65f9dbb30d7f7ce5498d2fe322 (patch) | |
| tree | 3f16fff94e092684e752fc241673505c98e0f169 /arch/arc/mm | |
| parent | 2c519f583e84eb578d4db48e38160f58aafad2ac (diff) | |
| download | linux-3624379d90ad2b65f9dbb30d7f7ce5498d2fe322.tar.bz2 | |
ARC: IOC: panic if kernel was started with previously enabled IOC
If IOC was already enabled (due to bootloader) it technically needs to
be reconfigured with aperture base,size corresponding to Linux memory map
which will certainly be different than uboot's. But disabling and
reenabling IOC when DMA might be potentially active is tricky business.
To avoid random memory issues later, just panic here and ask user to
upgrade bootloader to one which doesn't enable IOC
This was actually seen as issue on some of the HSDK board with a version
of uboot which enabled IOC. There were random issues later with starting
of X or peripherals etc.
Also while I'm at it, replace hardcoded bits in ARC_REG_IO_COH_PARTIAL
and ARC_REG_IO_COH_ENABLE registers by definitions.
Inspired by: https://lkml.org/lkml/2018/1/19/557
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Diffstat (limited to 'arch/arc/mm')
| -rw-r--r-- | arch/arc/mm/cache.c | 20 |
1 files changed, 17 insertions, 3 deletions
diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c index f2701c13a66b..cf9619d4efb4 100644 --- a/arch/arc/mm/cache.c +++ b/arch/arc/mm/cache.c @@ -1145,6 +1145,20 @@ noinline void __init arc_ioc_setup(void) unsigned int ioc_base, mem_sz; /* + * If IOC was already enabled (due to bootloader) it technically needs to + * be reconfigured with aperture base,size corresponding to Linux memory map + * which will certainly be different than uboot's. But disabling and + * reenabling IOC when DMA might be potentially active is tricky business. + * To avoid random memory issues later, just panic here and ask user to + * upgrade bootloader to one which doesn't enable IOC + */ + if (read_aux_reg(ARC_REG_IO_COH_ENABLE) & ARC_IO_COH_ENABLE_BIT) + panic("IOC already enabled, please upgrade bootloader!\n"); + + if (!ioc_enable) + return; + + /* * As for today we don't support both IOC and ZONE_HIGHMEM enabled * simultaneously. This happens because as of today IOC aperture covers * only ZONE_NORMAL (low mem) and any dma transactions outside this @@ -1187,8 +1201,8 @@ noinline void __init arc_ioc_setup(void) panic("IOC Aperture start must be aligned to the size of the aperture"); write_aux_reg(ARC_REG_IO_COH_AP0_BASE, ioc_base >> 12); - write_aux_reg(ARC_REG_IO_COH_PARTIAL, 1); - write_aux_reg(ARC_REG_IO_COH_ENABLE, 1); + write_aux_reg(ARC_REG_IO_COH_PARTIAL, ARC_IO_COH_PARTIAL_BIT); + write_aux_reg(ARC_REG_IO_COH_ENABLE, ARC_IO_COH_ENABLE_BIT); /* Re-enable L1 dcache */ __dc_enable(); @@ -1265,7 +1279,7 @@ void __init arc_cache_init_master(void) if (is_isa_arcv2() && l2_line_sz && !slc_enable) arc_slc_disable(); - if (is_isa_arcv2() && ioc_enable) + if (is_isa_arcv2() && ioc_exists) arc_ioc_setup(); if (is_isa_arcv2() && l2_line_sz && slc_enable) { |