diff options
author | Vineet Gupta <vgupta@synopsys.com> | 2013-05-28 13:50:41 +0530 |
---|---|---|
committer | Vineet Gupta <vgupta@synopsys.com> | 2013-06-22 19:23:25 +0530 |
commit | 359105bdb06f8421fd8e69ae47fd052e398b6778 (patch) | |
tree | 025dfe3a68cb9afa0a6e877ad264bbb8cf957783 /arch/arc/include/asm/processor.h | |
parent | ba3558c772ce1ac64d07f46b8c763349a0e51ba3 (diff) | |
download | linux-359105bdb06f8421fd8e69ae47fd052e398b6778.tar.bz2 |
ARC: pt_regs update #4: r25 saved/restored unconditionally
(This is a VERY IMP change for low level interrupt/exception handling)
-----------------------------------------------------------------------
WHAT
-----------------------------------------------------------------------
* User 25 now saved in pt_regs->user_r25 (vs. tsk->thread_info.user_r25)
* This allows Low level interrupt code to unconditionally save r25
(vs. the prev version which would only do it for U->K transition).
Ofcourse for nested interrupts, only the pt_regs->user_r25 of
bottom-most frame is useful.
* simplifies the interrupt prologue/epilogue
* Needed for ARCv2 ISA code and done here to keep design similar with
ARCompact event handling
-----------------------------------------------------------------------
WHY
-------------------------------------------------------------------------
With CONFIG_ARC_CURR_IN_REG, r25 is used to cache "current" task pointer
in kernel mode. So when entering kernel mode from User Mode
- user r25 is specially safe-kept (it being a callee reg is NOT part of
pt_regs which are saved by default on each interrupt/trap/exception)
- r25 loaded with current task pointer.
Further, if interrupt was taken in kernel mode, this is skipped since we
know that r25 already has valid "current" pointer.
With 2 level of interrupts in ARCompact ISA, detecting this is difficult
but still possible, since we could be in kernel mode but r25 not already saved
(in fact the stack itself might not have been switched).
A. User mode
B. L1 IRQ taken
C. L2 IRQ taken (while on 1st line of L1 ISR)
So in #C, although in kernel mode, r25 not saved (infact SP not
switched at all)
Given that ARcompact has manual stack switching, we could use a bit of
trickey - The low level code would make sure that SP is only set to kernel
mode value at the very end (after saving r25). So a non kernel mode SP,
even if in kernel mode, meant r25 was NOT saved.
The same paradigm won't work in ARCv2 ISA since SP is auto-switched so
it's setting can't be delayed/constrained.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Diffstat (limited to 'arch/arc/include/asm/processor.h')
-rw-r--r-- | arch/arc/include/asm/processor.h | 3 |
1 files changed, 0 insertions, 3 deletions
diff --git a/arch/arc/include/asm/processor.h b/arch/arc/include/asm/processor.h index 8c77e623c4e5..b0b5d2d9b3d3 100644 --- a/arch/arc/include/asm/processor.h +++ b/arch/arc/include/asm/processor.h @@ -30,9 +30,6 @@ struct thread_struct { unsigned long callee_reg; /* pointer to callee regs */ unsigned long fault_address; /* dbls as brkpt holder as well */ unsigned long cause_code; /* Exception Cause Code (ECR) */ -#ifdef CONFIG_ARC_CURR_IN_REG - unsigned long user_r25; -#endif #ifdef CONFIG_ARC_FPU_SAVE_RESTORE struct arc_fpu fpu; #endif |