Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 38 insertions, 0 deletions

diff --git a/arch/alpha/kernel/ns87312.c b/arch/alpha/kernel/ns87312.c
new file mode 100644
index 000000000000..342b56d24c20
--- /dev/null
+++ b/arch/alpha/kernel/ns87312.c
@@ -0,0 +1,38 @@
+/*
+ *	linux/arch/alpha/kernel/ns87312.c
+ */
+
+#include <linux/init.h>
+#include <asm/io.h>
+#include "proto.h"
+
+
+/*
+ * The SRM console *disables* the IDE interface, this code ensures it's
+ * enabled.
+ *
+ * This code bangs on a control register of the 87312 Super I/O chip
+ * that implements parallel port/serial ports/IDE/FDI.  Depending on
+ * the motherboard, the Super I/O chip can be configured through a
+ * pair of registers that are located either at I/O ports 0x26e/0x26f
+ * or 0x398/0x399.  Unfortunately, autodetecting which base address is
+ * in use works only once (right after a reset).  The Super I/O chip
+ * has the additional quirk that configuration register data must be
+ * written twice (I believe this is a safety feature to prevent
+ * accidental modification---fun, isn't it?).
+ */
+
+void __init
+ns87312_enable_ide(long ide_base)
+{
+	int data;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	outb(0, ide_base);		/* set the index register for reg #0 */
+	data = inb(ide_base+1);		/* read the current contents */
+	outb(0, ide_base);		/* set the index register for reg #0 */
+	outb(data | 0x40, ide_base+1);	/* turn on IDE */
+	outb(data | 0x40, ide_base+1);	/* turn on IDE, really! */
+	local_irq_restore(flags);
+}