diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /arch/alpha/kernel/core_lca.c | |
download | linux-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.bz2 |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'arch/alpha/kernel/core_lca.c')
-rw-r--r-- | arch/alpha/kernel/core_lca.c | 515 |
1 files changed, 515 insertions, 0 deletions
diff --git a/arch/alpha/kernel/core_lca.c b/arch/alpha/kernel/core_lca.c new file mode 100644 index 000000000000..6a5a9145c676 --- /dev/null +++ b/arch/alpha/kernel/core_lca.c @@ -0,0 +1,515 @@ +/* + * linux/arch/alpha/kernel/core_lca.c + * + * Written by David Mosberger (davidm@cs.arizona.edu) with some code + * taken from Dave Rusling's (david.rusling@reo.mts.dec.com) 32-bit + * bios code. + * + * Code common to all LCA core logic chips. + */ + +#define __EXTERN_INLINE inline +#include <asm/io.h> +#include <asm/core_lca.h> +#undef __EXTERN_INLINE + +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/tty.h> + +#include <asm/ptrace.h> +#include <asm/smp.h> + +#include "proto.h" +#include "pci_impl.h" + + +/* + * BIOS32-style PCI interface: + */ + +/* + * Machine check reasons. Defined according to PALcode sources + * (osf.h and platform.h). + */ +#define MCHK_K_TPERR 0x0080 +#define MCHK_K_TCPERR 0x0082 +#define MCHK_K_HERR 0x0084 +#define MCHK_K_ECC_C 0x0086 +#define MCHK_K_ECC_NC 0x0088 +#define MCHK_K_UNKNOWN 0x008A +#define MCHK_K_CACKSOFT 0x008C +#define MCHK_K_BUGCHECK 0x008E +#define MCHK_K_OS_BUGCHECK 0x0090 +#define MCHK_K_DCPERR 0x0092 +#define MCHK_K_ICPERR 0x0094 + + +/* + * Platform-specific machine-check reasons: + */ +#define MCHK_K_SIO_SERR 0x204 /* all platforms so far */ +#define MCHK_K_SIO_IOCHK 0x206 /* all platforms so far */ +#define MCHK_K_DCSR 0x208 /* all but Noname */ + + +/* + * Given a bus, device, and function number, compute resulting + * configuration space address and setup the LCA_IOC_CONF register + * accordingly. It is therefore not safe to have concurrent + * invocations to configuration space access routines, but there + * really shouldn't be any need for this. + * + * Type 0: + * + * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 + * 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0 + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + * | | | | | | | | | | | | | | | | | | | | | | | |F|F|F|R|R|R|R|R|R|0|0| + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + * + * 31:11 Device select bit. + * 10:8 Function number + * 7:2 Register number + * + * Type 1: + * + * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 + * 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0 + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1| + * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ + * + * 31:24 reserved + * 23:16 bus number (8 bits = 128 possible buses) + * 15:11 Device number (5 bits) + * 10:8 function number + * 7:2 register number + * + * Notes: + * The function number selects which function of a multi-function device + * (e.g., SCSI and Ethernet). + * + * The register selects a DWORD (32 bit) register offset. Hence it + * doesn't get shifted by 2 bits as we want to "drop" the bottom two + * bits. + */ + +static int +mk_conf_addr(struct pci_bus *pbus, unsigned int device_fn, int where, + unsigned long *pci_addr) +{ + unsigned long addr; + u8 bus = pbus->number; + + if (bus == 0) { + int device = device_fn >> 3; + int func = device_fn & 0x7; + + /* Type 0 configuration cycle. */ + + if (device > 12) { + return -1; + } + + *(vulp)LCA_IOC_CONF = 0; + addr = (1 << (11 + device)) | (func << 8) | where; + } else { + /* Type 1 configuration cycle. */ + *(vulp)LCA_IOC_CONF = 1; + addr = (bus << 16) | (device_fn << 8) | where; + } + *pci_addr = addr; + return 0; +} + +static unsigned int +conf_read(unsigned long addr) +{ + unsigned long flags, code, stat0; + unsigned int value; + + local_irq_save(flags); + + /* Reset status register to avoid loosing errors. */ + stat0 = *(vulp)LCA_IOC_STAT0; + *(vulp)LCA_IOC_STAT0 = stat0; + mb(); + + /* Access configuration space. */ + value = *(vuip)addr; + draina(); + + stat0 = *(vulp)LCA_IOC_STAT0; + if (stat0 & LCA_IOC_STAT0_ERR) { + code = ((stat0 >> LCA_IOC_STAT0_CODE_SHIFT) + & LCA_IOC_STAT0_CODE_MASK); + if (code != 1) { + printk("lca.c:conf_read: got stat0=%lx\n", stat0); + } + + /* Reset error status. */ + *(vulp)LCA_IOC_STAT0 = stat0; + mb(); + + /* Reset machine check. */ + wrmces(0x7); + + value = 0xffffffff; + } + local_irq_restore(flags); + return value; +} + +static void +conf_write(unsigned long addr, unsigned int value) +{ + unsigned long flags, code, stat0; + + local_irq_save(flags); /* avoid getting hit by machine check */ + + /* Reset status register to avoid loosing errors. */ + stat0 = *(vulp)LCA_IOC_STAT0; + *(vulp)LCA_IOC_STAT0 = stat0; + mb(); + + /* Access configuration space. */ + *(vuip)addr = value; + draina(); + + stat0 = *(vulp)LCA_IOC_STAT0; + if (stat0 & LCA_IOC_STAT0_ERR) { + code = ((stat0 >> LCA_IOC_STAT0_CODE_SHIFT) + & LCA_IOC_STAT0_CODE_MASK); + if (code != 1) { + printk("lca.c:conf_write: got stat0=%lx\n", stat0); + } + + /* Reset error status. */ + *(vulp)LCA_IOC_STAT0 = stat0; + mb(); + + /* Reset machine check. */ + wrmces(0x7); + } + local_irq_restore(flags); +} + +static int +lca_read_config(struct pci_bus *bus, unsigned int devfn, int where, + int size, u32 *value) +{ + unsigned long addr, pci_addr; + long mask; + int shift; + + if (mk_conf_addr(bus, devfn, where, &pci_addr)) + return PCIBIOS_DEVICE_NOT_FOUND; + + shift = (where & 3) * 8; + mask = (size - 1) * 8; + addr = (pci_addr << 5) + mask + LCA_CONF; + *value = conf_read(addr) >> (shift); + return PCIBIOS_SUCCESSFUL; +} + +static int +lca_write_config(struct pci_bus *bus, unsigned int devfn, int where, int size, + u32 value) +{ + unsigned long addr, pci_addr; + long mask; + + if (mk_conf_addr(bus, devfn, where, &pci_addr)) + return PCIBIOS_DEVICE_NOT_FOUND; + + mask = (size - 1) * 8; + addr = (pci_addr << 5) + mask + LCA_CONF; + conf_write(addr, value << ((where & 3) * 8)); + return PCIBIOS_SUCCESSFUL; +} + +struct pci_ops lca_pci_ops = +{ + .read = lca_read_config, + .write = lca_write_config, +}; + +void +lca_pci_tbi(struct pci_controller *hose, dma_addr_t start, dma_addr_t end) +{ + wmb(); + *(vulp)LCA_IOC_TBIA = 0; + mb(); +} + +void __init +lca_init_arch(void) +{ + struct pci_controller *hose; + + /* + * Create our single hose. + */ + + pci_isa_hose = hose = alloc_pci_controller(); + hose->io_space = &ioport_resource; + hose->mem_space = &iomem_resource; + hose->index = 0; + + hose->sparse_mem_base = LCA_SPARSE_MEM - IDENT_ADDR; + hose->dense_mem_base = LCA_DENSE_MEM - IDENT_ADDR; + hose->sparse_io_base = LCA_IO - IDENT_ADDR; + hose->dense_io_base = 0; + + /* + * Set up the PCI to main memory translation windows. + * + * Mimic the SRM settings for the direct-map window. + * Window 0 is scatter-gather 8MB at 8MB (for isa). + * Window 1 is direct access 1GB at 1GB. + * + * Note that we do not try to save any of the DMA window CSRs + * before setting them, since we cannot read those CSRs on LCA. + */ + hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000, 0); + hose->sg_pci = NULL; + __direct_map_base = 0x40000000; + __direct_map_size = 0x40000000; + + *(vulp)LCA_IOC_W_BASE0 = hose->sg_isa->dma_base | (3UL << 32); + *(vulp)LCA_IOC_W_MASK0 = (hose->sg_isa->size - 1) & 0xfff00000; + *(vulp)LCA_IOC_T_BASE0 = virt_to_phys(hose->sg_isa->ptes); + + *(vulp)LCA_IOC_W_BASE1 = __direct_map_base | (2UL << 32); + *(vulp)LCA_IOC_W_MASK1 = (__direct_map_size - 1) & 0xfff00000; + *(vulp)LCA_IOC_T_BASE1 = 0; + + *(vulp)LCA_IOC_TB_ENA = 0x80; + + lca_pci_tbi(hose, 0, -1); + + /* + * Disable PCI parity for now. The NCR53c810 chip has + * troubles meeting the PCI spec which results in + * data parity errors. + */ + *(vulp)LCA_IOC_PAR_DIS = 1UL<<5; + + /* + * Finally, set up for restoring the correct HAE if using SRM. + * Again, since we cannot read many of the CSRs on the LCA, + * one of which happens to be the HAE, we save the value that + * the SRM will expect... + */ + if (alpha_using_srm) + srm_hae = 0x80000000UL; +} + +/* + * Constants used during machine-check handling. I suppose these + * could be moved into lca.h but I don't see much reason why anybody + * else would want to use them. + */ + +#define ESR_EAV (1UL<< 0) /* error address valid */ +#define ESR_CEE (1UL<< 1) /* correctable error */ +#define ESR_UEE (1UL<< 2) /* uncorrectable error */ +#define ESR_WRE (1UL<< 3) /* write-error */ +#define ESR_SOR (1UL<< 4) /* error source */ +#define ESR_CTE (1UL<< 7) /* cache-tag error */ +#define ESR_MSE (1UL<< 9) /* multiple soft errors */ +#define ESR_MHE (1UL<<10) /* multiple hard errors */ +#define ESR_NXM (1UL<<12) /* non-existent memory */ + +#define IOC_ERR ( 1<<4) /* ioc logs an error */ +#define IOC_CMD_SHIFT 0 +#define IOC_CMD (0xf<<IOC_CMD_SHIFT) +#define IOC_CODE_SHIFT 8 +#define IOC_CODE (0xf<<IOC_CODE_SHIFT) +#define IOC_LOST ( 1<<5) +#define IOC_P_NBR ((__u32) ~((1<<13) - 1)) + +static void +mem_error(unsigned long esr, unsigned long ear) +{ + printk(" %s %s error to %s occurred at address %x\n", + ((esr & ESR_CEE) ? "Correctable" : + (esr & ESR_UEE) ? "Uncorrectable" : "A"), + (esr & ESR_WRE) ? "write" : "read", + (esr & ESR_SOR) ? "memory" : "b-cache", + (unsigned) (ear & 0x1ffffff8)); + if (esr & ESR_CTE) { + printk(" A b-cache tag parity error was detected.\n"); + } + if (esr & ESR_MSE) { + printk(" Several other correctable errors occurred.\n"); + } + if (esr & ESR_MHE) { + printk(" Several other uncorrectable errors occurred.\n"); + } + if (esr & ESR_NXM) { + printk(" Attempted to access non-existent memory.\n"); + } +} + +static void +ioc_error(__u32 stat0, __u32 stat1) +{ + static const char * const pci_cmd[] = { + "Interrupt Acknowledge", "Special", "I/O Read", "I/O Write", + "Rsvd 1", "Rsvd 2", "Memory Read", "Memory Write", "Rsvd3", + "Rsvd4", "Configuration Read", "Configuration Write", + "Memory Read Multiple", "Dual Address", "Memory Read Line", + "Memory Write and Invalidate" + }; + static const char * const err_name[] = { + "exceeded retry limit", "no device", "bad data parity", + "target abort", "bad address parity", "page table read error", + "invalid page", "data error" + }; + unsigned code = (stat0 & IOC_CODE) >> IOC_CODE_SHIFT; + unsigned cmd = (stat0 & IOC_CMD) >> IOC_CMD_SHIFT; + + printk(" %s initiated PCI %s cycle to address %x" + " failed due to %s.\n", + code > 3 ? "PCI" : "CPU", pci_cmd[cmd], stat1, err_name[code]); + + if (code == 5 || code == 6) { + printk(" (Error occurred at PCI memory address %x.)\n", + (stat0 & ~IOC_P_NBR)); + } + if (stat0 & IOC_LOST) { + printk(" Other PCI errors occurred simultaneously.\n"); + } +} + +void +lca_machine_check(unsigned long vector, unsigned long la_ptr, + struct pt_regs *regs) +{ + const char * reason; + union el_lca el; + + el.c = (struct el_common *) la_ptr; + + wrmces(rdmces()); /* reset machine check pending flag */ + + printk(KERN_CRIT "LCA machine check: vector=%#lx pc=%#lx code=%#x\n", + vector, regs->pc, (unsigned int) el.c->code); + + /* + * The first quadword after the common header always seems to + * be the machine check reason---don't know why this isn't + * part of the common header instead. In the case of a long + * logout frame, the upper 32 bits is the machine check + * revision level, which we ignore for now. + */ + switch ((unsigned int) el.c->code) { + case MCHK_K_TPERR: reason = "tag parity error"; break; + case MCHK_K_TCPERR: reason = "tag control parity error"; break; + case MCHK_K_HERR: reason = "access to non-existent memory"; break; + case MCHK_K_ECC_C: reason = "correctable ECC error"; break; + case MCHK_K_ECC_NC: reason = "non-correctable ECC error"; break; + case MCHK_K_CACKSOFT: reason = "MCHK_K_CACKSOFT"; break; + case MCHK_K_BUGCHECK: reason = "illegal exception in PAL mode"; break; + case MCHK_K_OS_BUGCHECK: reason = "callsys in kernel mode"; break; + case MCHK_K_DCPERR: reason = "d-cache parity error"; break; + case MCHK_K_ICPERR: reason = "i-cache parity error"; break; + case MCHK_K_SIO_SERR: reason = "SIO SERR occurred on PCI bus"; break; + case MCHK_K_SIO_IOCHK: reason = "SIO IOCHK occurred on ISA bus"; break; + case MCHK_K_DCSR: reason = "MCHK_K_DCSR"; break; + case MCHK_K_UNKNOWN: + default: reason = "unknown"; break; + } + + switch (el.c->size) { + case sizeof(struct el_lca_mcheck_short): + printk(KERN_CRIT + " Reason: %s (short frame%s, dc_stat=%#lx):\n", + reason, el.c->retry ? ", retryable" : "", + el.s->dc_stat); + if (el.s->esr & ESR_EAV) { + mem_error(el.s->esr, el.s->ear); + } + if (el.s->ioc_stat0 & IOC_ERR) { + ioc_error(el.s->ioc_stat0, el.s->ioc_stat1); + } + break; + + case sizeof(struct el_lca_mcheck_long): + printk(KERN_CRIT " Reason: %s (long frame%s):\n", + reason, el.c->retry ? ", retryable" : ""); + printk(KERN_CRIT + " reason: %#lx exc_addr: %#lx dc_stat: %#lx\n", + el.l->pt[0], el.l->exc_addr, el.l->dc_stat); + printk(KERN_CRIT " car: %#lx\n", el.l->car); + if (el.l->esr & ESR_EAV) { + mem_error(el.l->esr, el.l->ear); + } + if (el.l->ioc_stat0 & IOC_ERR) { + ioc_error(el.l->ioc_stat0, el.l->ioc_stat1); + } + break; + + default: + printk(KERN_CRIT " Unknown errorlog size %d\n", el.c->size); + } + + /* Dump the logout area to give all info. */ +#ifdef CONFIG_VERBOSE_MCHECK + if (alpha_verbose_mcheck > 1) { + unsigned long * ptr = (unsigned long *) la_ptr; + long i; + for (i = 0; i < el.c->size / sizeof(long); i += 2) { + printk(KERN_CRIT " +%8lx %016lx %016lx\n", + i*sizeof(long), ptr[i], ptr[i+1]); + } + } +#endif /* CONFIG_VERBOSE_MCHECK */ +} + +/* + * The following routines are needed to support the SPEED changing + * necessary to successfully manage the thermal problem on the AlphaBook1. + */ + +void +lca_clock_print(void) +{ + long pmr_reg; + + pmr_reg = LCA_READ_PMR; + + printk("Status of clock control:\n"); + printk("\tPrimary clock divisor\t0x%lx\n", LCA_GET_PRIMARY(pmr_reg)); + printk("\tOverride clock divisor\t0x%lx\n", LCA_GET_OVERRIDE(pmr_reg)); + printk("\tInterrupt override is %s\n", + (pmr_reg & LCA_PMR_INTO) ? "on" : "off"); + printk("\tDMA override is %s\n", + (pmr_reg & LCA_PMR_DMAO) ? "on" : "off"); + +} + +int +lca_get_clock(void) +{ + long pmr_reg; + + pmr_reg = LCA_READ_PMR; + return(LCA_GET_PRIMARY(pmr_reg)); + +} + +void +lca_clock_fiddle(int divisor) +{ + long pmr_reg; + + pmr_reg = LCA_READ_PMR; + LCA_SET_PRIMARY_CLOCK(pmr_reg, divisor); + /* lca_norm_clock = divisor; */ + LCA_WRITE_PMR(pmr_reg); + mb(); +} |