Merge tag 'gpio-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This time very little driver changes but lots of core changes.

  We have some interesting cooperative work for ARM and Intel alike,
  making the GPIO subsystem more and more suitable for industrial
  systems and the like, in addition to the in-kernel users.

  We touch driver core (device properties) and lib/* by adding one
  simple string array free function, these are authored by Andy
  Shevchenko who is a well known and recognized core helpers maintainers
  so this should be fine.

  We also see some Android GKI-related modularization in the MXC
  drivers.

  Core changes:

   - The big core change is the updated (v2) userspace character device
     API.

     This corrects badly designed 64-bit alignment around the line
     events. We also add the debounce request feature. This echoes the
     often quotes passage from Frederick Brooks "The mythical man-month"
     to always throw one away, which we have seen before in things such
     as V4L2. So we put in a new one and deprecate and obsolete the old
     one.

   - All example tools in tools/gpio/* are migrated to the new API to
     set a good example. The libgpiod userspace library has been
     augmented to use this new API pretty much from day 1.

   - Some misc API hardening by using strn* function calls has been
     added as well.

   - Use the simpler IDA interface for GPIO chip instance enumeration.

   - Add device core function for counting string arrays in device
     properties.

   - Provide a generic library function kfree_strarray() that can be
     used throughout the kernel.

  Driver enhancements:

   - The DesignWare dwapb-gpio driver has been enhanced and now uses the
     IRQ handling in the gpiolib core.

   - The mockup and aggregator drivers have seen some substantial code
     clean-up and now use more of the core kernel inftrastructure.

   - Misc cleanups using dev_err_probe().

   - The MXC drivers (Freescale/NXP) can now be built modularized, which
     makes modularized GKI Android kernels happy"

* tag 'gpio-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (73 commits)
  gpiolib: Update header block in gpiolib-cdev.h
  gpiolib: cdev: switch from kstrdup() to kstrndup()
  docs: gpio: add a new document to its index.rst
  gpio: pca953x: Add support for the NXP PCAL9554B/C
  tools: gpio: add debounce support to gpio-event-mon
  tools: gpio: add multi-line monitoring to gpio-event-mon
  tools: gpio: port gpio-event-mon to v2 uAPI
  tools: gpio: port gpio-hammer to v2 uAPI
  tools: gpio: rename nlines to num_lines
  tools: gpio: port gpio-watch to v2 uAPI
  tools: gpio: port lsgpio to v2 uAPI
  gpio: uapi: document uAPI v1 as deprecated
  gpiolib: cdev: support setting debounce
  gpiolib: cdev: support GPIO_V2_LINE_SET_VALUES_IOCTL
  gpiolib: cdev: support GPIO_V2_LINE_SET_CONFIG_IOCTL
  gpiolib: cdev: support edge detection for uAPI v2
  gpiolib: cdev: support GPIO_V2_GET_LINEINFO_IOCTL and GPIO_V2_GET_LINEINFO_WATCH_IOCTL
  gpiolib: cdev: support GPIO_V2_GET_LINE_IOCTL and GPIO_V2_LINE_GET_VALUES_IOCTL
  gpiolib: add build option for CDEV v1 ABI
  gpiolib: make cdev a build option
  ...

10 files changed, 342 insertions, 158 deletions

diff --git a/Documentation/admin-guide/gpio/gpio-mockup.rst b/Documentation/admin-guide/gpio/gpio-mockup.rst
new file mode 100644
index 000000000000..9fa1618b3adc
--- /dev/null
+++ b/Documentation/admin-guide/gpio/gpio-mockup.rst
@@ -0,0 +1,50 @@
+.. SPDX-License-Identifier: GPL-2.0-only
+
+GPIO Testing Driver
+===================
+
+The GPIO Testing Driver (gpio-mockup) provides a way to create simulated GPIO
+chips for testing purposes. The lines exposed by these chips can be accessed
+using the standard GPIO character device interface as well as manipulated
+using the dedicated debugfs directory structure.
+
+Creating simulated chips using module params
+--------------------------------------------
+
+When loading the gpio-mockup driver a number of parameters can be passed to the
+module.
+
+    gpio_mockup_ranges
+
+        This parameter takes an argument in the form of an array of integer
+        pairs. Each pair defines the base GPIO number (if any) and the number
+        of lines exposed by the chip. If the base GPIO is -1, the gpiolib
+        will assign it automatically.
+
+        Example: gpio_mockup_ranges=-1,8,-1,16,405,4
+
+        The line above creates three chips. The first one will expose 8 lines,
+        the second 16 and the third 4. The base GPIO for the third chip is set
+        to 405 while for two first chips it will be assigned automatically.
+
+    gpio_named_lines
+
+        This parameter doesn't take any arguments. It lets the driver know that
+        GPIO lines exposed by it should be named.
+
+        The name format is: gpio-mockup-X-Y where X is mockup chip's ID
+        and Y is the line offset.
+
+Manipulating simulated lines
+----------------------------
+
+Each mockup chip creates its own subdirectory in /sys/kernel/debug/gpio-mockup/.
+The directory is named after the chip's label. A symlink is also created, named
+after the chip's name, which points to the label directory.
+
+Inside each subdirectory, there's a separate attribute for each GPIO line. The
+name of the attribute represents the line's offset in the chip.
+
+Reading from a line attribute returns the current value. Writing to it (0 or 1)
+changes the configuration of the simulated pull-up/pull-down resistor
+(1 - pull-up, 0 - pull-down).
diff --git a/Documentation/admin-guide/gpio/index.rst b/Documentation/admin-guide/gpio/index.rst
index ef2838638e96..7db367572f30 100644
--- a/Documentation/admin-guide/gpio/index.rst
+++ b/Documentation/admin-guide/gpio/index.rst
@@ -9,6 +9,7 @@ gpio
 
     gpio-aggregator
     sysfs
+    gpio-mockup
 
 .. only::  subproject and html
 
diff --git a/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml
index 0b223abe8cfb..f57d22d1ebd6 100644
--- a/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.yaml
@@ -11,12 +11,33 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - fsl,imx1-gpio
-      - fsl,imx21-gpio
-      - fsl,imx31-gpio
-      - fsl,imx35-gpio
-      - fsl,imx7d-gpio
+    oneOf:
+      - enum:
+          - fsl,imx1-gpio
+          - fsl,imx21-gpio
+          - fsl,imx31-gpio
+          - fsl,imx35-gpio
+          - fsl,imx7d-gpio
+      - items:
+          - const: fsl,imx35-gpio
+          - const: fsl,imx31-gpio
+      - items:
+          - enum:
+              - fsl,imx50-gpio
+              - fsl,imx51-gpio
+              - fsl,imx53-gpio
+              - fsl,imx6q-gpio
+              - fsl,imx6sl-gpio
+              - fsl,imx6sll-gpio
+              - fsl,imx6sx-gpio
+              - fsl,imx6ul-gpio
+              - fsl,imx7d-gpio
+              - fsl,imx8mm-gpio
+              - fsl,imx8mn-gpio
+              - fsl,imx8mp-gpio
+              - fsl,imx8mq-gpio
+              - fsl,imx8qxp-gpio
+          - const: fsl,imx35-gpio
 
   reg:
     maxItems: 1
@@ -41,6 +62,28 @@ properties:
     const: 2
 
   gpio-controller: true
+  gpio-line-names: true
+  gpio-ranges: true
+
+  power-domains:
+    maxItems: 1
+
+patternProperties:
+  "^(hog-[0-9]+|.+-hog(-[0-9]+)?)$":
+    type: object
+    properties:
+      gpio-hog: true
+      gpios: true
+      input: true
+      output-high: true
+      output-low: true
+      line-name: true
+
+    required:
+      - gpio-hog
+      - gpios
+
+    additionalProperties: false
 
 required:
   - compatible
diff --git a/Documentation/devicetree/bindings/gpio/gpio-max732x.txt b/Documentation/devicetree/bindings/gpio/gpio-max732x.txt
deleted file mode 100644
index b3a9c0c32823..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-max732x.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-* MAX732x-compatible I/O expanders
-
-Required properties:
-  - compatible: Should be one of the following:
-    - "maxim,max7319": For the Maxim MAX7319
-    - "maxim,max7320": For the Maxim MAX7320
-    - "maxim,max7321": For the Maxim MAX7321
-    - "maxim,max7322": For the Maxim MAX7322
-    - "maxim,max7323": For the Maxim MAX7323
-    - "maxim,max7324": For the Maxim MAX7324
-    - "maxim,max7325": For the Maxim MAX7325
-    - "maxim,max7326": For the Maxim MAX7326
-    - "maxim,max7327": For the Maxim MAX7327
-  - reg: I2C slave address for this device.
-  - gpio-controller: Marks the device node as a GPIO controller.
-  - #gpio-cells: Should be 2.
-    - first cell is the GPIO number
-    - second cell specifies GPIO flags, as defined in <dt-bindings/gpio/gpio.h>.
-      Only the GPIO_ACTIVE_HIGH and GPIO_ACTIVE_LOW flags are supported.
-
-Optional properties:
-
-  The I/O expander can detect input state changes, and thus optionally act as
-  an interrupt controller. When the expander interrupt line is connected all the
-  following properties must be set. For more information please see the
-  interrupt controller device tree bindings documentation available at
-  Documentation/devicetree/bindings/interrupt-controller/interrupts.txt.
-
-  - interrupt-controller: Identifies the node as an interrupt controller.
-  - #interrupt-cells: Number of cells to encode an interrupt source, shall be 2.
-    - first cell is the pin number
-    - second cell is used to specify flags
-  - interrupts: Interrupt specifier for the controllers interrupt.
-
-Please refer to gpio.txt in this directory for details of the common GPIO
-bindings used by client devices.
-
-Example 1. MAX7325 with interrupt support enabled (CONFIG_GPIO_MAX732X_IRQ=y):
-
-	expander: max7325@6d {
-		compatible = "maxim,max7325";
-		reg = <0x6d>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		interrupt-parent = <&gpio4>;
-		interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
-	};
-
-Example 2. MAX7325 with interrupt support disabled (CONFIG_GPIO_MAX732X_IRQ=n):
-
-	expander: max7325@6d {
-		compatible = "maxim,max7325";
-		reg = <0x6d>;
-		gpio-controller;
-		#gpio-cells = <2>;
-	};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt b/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt
deleted file mode 100644
index 3126c3817e2a..000000000000
--- a/Documentation/devicetree/bindings/gpio/gpio-pca953x.txt
+++ /dev/null
@@ -1,90 +0,0 @@
-* NXP PCA953x I2C GPIO multiplexer
-
-Required properties:
- - compatible: Has to contain one of the following:
-	nxp,pca6416
-	nxp,pca9505
-	nxp,pca9534
-	nxp,pca9535
-	nxp,pca9536
-	nxp,pca9537
-	nxp,pca9538
-	nxp,pca9539
-	nxp,pca9554
-	nxp,pca9555
-	nxp,pca9556
-	nxp,pca9557
-	nxp,pca9574
-	nxp,pca9575
-	nxp,pca9698
-	nxp,pcal6416
-	nxp,pcal6524
-	nxp,pcal9535
-	nxp,pcal9555a
-	maxim,max7310
-	maxim,max7312
-	maxim,max7313
-	maxim,max7315
-	ti,pca6107
-	ti,pca9536
-	ti,tca6408
-	ti,tca6416
-	ti,tca6424
-	ti,tca9539
-	ti,tca9554
-	onnn,cat9554
-	onnn,pca9654
-	exar,xra1202
- - gpio-controller: if used as gpio expander.
- - #gpio-cells: if used as gpio expander.
- - interrupt-controller: if to be used as interrupt expander.
- - #interrupt-cells: if to be used as interrupt expander.
-
-Optional properties:
- - interrupts: interrupt specifier for the device's interrupt output.
- - reset-gpios: GPIO specification for the RESET input. This is an
-		active low signal to the PCA953x.
- - vcc-supply:	power supply regulator.
-
-Example:
-
-
-	gpio@20 {
-		compatible = "nxp,pca9505";
-		reg = <0x20>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_pca9505>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
-	};
-
-
-Example with Interrupts:
-
-
-	gpio99: gpio@22 {
-		compatible = "nxp,pcal6524";
-		reg = <0x22>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;	/* gpio6_161 */
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		vcc-supply = <&vdds_1v8_main>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-line-names =
-			"hdmi-ct-hpd", "hdmi.ls-oe", "p02", "p03", "vibra", "fault2", "p06", "p07",
-			"en-usb", "en-host1", "en-host2", "chg-int", "p14", "p15", "mic-int", "en-modem",
-			"shdn-hs-amp", "chg-status+red", "green", "blue", "en-esata", "fault1", "p26", "p27";
-	};
-
-	ts3a227@3b {
-		compatible = "ti,ts3a227e";
-		reg = <0x3b>;
-		interrupt-parent = <&gpio99>;
-		interrupts = <14 IRQ_TYPE_EDGE_RISING>;
-		ti,micbias = <0>;	/* 2.1V */
-	};
-
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml b/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml
new file mode 100644
index 000000000000..183ec23eda39
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-pca95xx.yaml
@@ -0,0 +1,232 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-pca95xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PCA95xx I2C GPIO multiplexer
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+description: |+
+  Bindings for the family of I2C GPIO multiplexers/expanders: NXP PCA95xx,
+  Maxim MAX73xx
+
+properties:
+  compatible:
+    enum:
+      - exar,xra1202
+      - maxim,max7310
+      - maxim,max7312
+      - maxim,max7313
+      - maxim,max7315
+      - maxim,max7319
+      - maxim,max7320
+      - maxim,max7321
+      - maxim,max7322
+      - maxim,max7323
+      - maxim,max7324
+      - maxim,max7325
+      - maxim,max7326
+      - maxim,max7327
+      - nxp,pca6416
+      - nxp,pca9505
+      - nxp,pca9534
+      - nxp,pca9535
+      - nxp,pca9536
+      - nxp,pca9537
+      - nxp,pca9538
+      - nxp,pca9539
+      - nxp,pca9554
+      - nxp,pca9555
+      - nxp,pca9556
+      - nxp,pca9557
+      - nxp,pca9574
+      - nxp,pca9575
+      - nxp,pca9698
+      - nxp,pcal6416
+      - nxp,pcal6524
+      - nxp,pcal9535
+      - nxp,pcal9555a
+      - onnn,cat9554
+      - onnn,pca9654
+      - ti,pca6107
+      - ti,pca9536
+      - ti,tca6408
+      - ti,tca6416
+      - ti,tca6424
+      - ti,tca9539
+      - ti,tca9554
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-line-names:
+    minItems: 1
+    maxItems: 32
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  reset-gpios:
+    description:
+      GPIO specification for the RESET input. This is an active low signal to
+      the PCA953x.  Not valid for Maxim MAX732x devices.
+
+  vcc-supply:
+    description:
+      Optional power supply.  Not valid for Maxim MAX732x devices.
+
+  wakeup-source:
+    $ref: /schemas/types.yaml#/definitions/flag
+
+patternProperties:
+  "^(hog-[0-9]+|.+-hog(-[0-9]+)?)$":
+    type: object
+    properties:
+      gpio-hog: true
+      gpios: true
+      input: true
+      output-high: true
+      output-low: true
+      line-name: true
+
+    required:
+      - gpio-hog
+      - gpios
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - "#gpio-cells"
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - maxim,max7320
+              - maxim,max7321
+              - maxim,max7322
+              - maxim,max7323
+              - maxim,max7324
+              - maxim,max7325
+              - maxim,max7326
+              - maxim,max7327
+    then:
+      properties:
+        reset-gpios: false
+        vcc-supply: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        gpio@20 {
+            compatible = "nxp,pca9505";
+            reg = <0x20>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&pinctrl_pca9505>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-parent = <&gpio3>;
+            interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+
+            usb3-sata-sel-hog {
+                gpio-hog;
+                gpios = <4 GPIO_ACTIVE_HIGH>;
+                output-low;
+                line-name = "usb3_sata_sel";
+            };
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c1 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        gpio99: gpio@22 {
+            compatible = "nxp,pcal6524";
+            reg = <0x22>;
+            interrupt-parent = <&gpio6>;
+            interrupts = <1 IRQ_TYPE_EDGE_FALLING>; /* gpio6_161 */
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            vcc-supply = <&vdds_1v8_main>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            gpio-line-names = "hdmi-ct-hpd", "hdmi.ls-oe", "p02", "p03",
+                              "vibra", "fault2", "p06", "p07", "en-usb",
+                              "en-host1", "en-host2", "chg-int", "p14", "p15",
+                              "mic-int", "en-modem", "shdn-hs-amp",
+                              "chg-status+red", "green", "blue", "en-esata",
+                              "fault1", "p26", "p27";
+        };
+
+        ts3a227@3b {
+            compatible = "ti,ts3a227e";
+            reg = <0x3b>;
+            interrupt-parent = <&gpio99>;
+            interrupts = <14 IRQ_TYPE_EDGE_RISING>;
+            ti,micbias = <0>; /* 2.1V */
+        };
+    };
+
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c2 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* MAX7325 with interrupt support enabled */
+        gpio@6d {
+            compatible = "maxim,max7325";
+            reg = <0x6d>;
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            interrupt-parent = <&gpio4>;
+            interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
+
+  - |
+    i2c3 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* MAX7325 with interrupt support disabled */
+        gpio@6e {
+            compatible = "maxim,max7325";
+            reg = <0x6e>;
+            gpio-controller;
+            #gpio-cells = <2>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/gpio/pl061-gpio.yaml b/Documentation/devicetree/bindings/gpio/pl061-gpio.yaml
index 313b17229247..bd35cbf7fa09 100644
--- a/Documentation/devicetree/bindings/gpio/pl061-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/pl061-gpio.yaml
@@ -51,7 +51,10 @@ properties:
 
   gpio-controller: true
 
+  gpio-line-names: true
+
   gpio-ranges:
+    minItems: 1
     maxItems: 8
 
 required:
diff --git a/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml b/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml
index 3ad229307bd5..5026662e4508 100644
--- a/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/renesas,rcar-gpio.yaml
@@ -37,6 +37,7 @@ properties:
               - renesas,gpio-r8a774a1     # RZ/G2M
               - renesas,gpio-r8a774b1     # RZ/G2N
               - renesas,gpio-r8a774c0     # RZ/G2E
+              - renesas,gpio-r8a774e1     # RZ/G2H
               - renesas,gpio-r8a7795      # R-Car H3
               - renesas,gpio-r8a7796      # R-Car M3-W
               - renesas,gpio-r8a77961     # R-Car M3-W+
diff --git a/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml b/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml
index 1240f6289249..b391cc1b4590 100644
--- a/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/snps,dw-apb-gpio.yaml
@@ -61,8 +61,14 @@ patternProperties:
       '#gpio-cells':
         const: 2
 
+      ngpios:
+        default: 32
+        minimum: 1
+        maximum: 32
+
       snps,nr-gpios:
         description: The number of GPIO pins exported by the port.
+        deprecated: true
         $ref: /schemas/types.yaml#/definitions/uint32
         default: 32
         minimum: 1
diff --git a/Documentation/devicetree/bindings/trivial-devices.yaml b/Documentation/devicetree/bindings/trivial-devices.yaml
index 25c4239ebbfb..78410df80022 100644
--- a/Documentation/devicetree/bindings/trivial-devices.yaml
+++ b/Documentation/devicetree/bindings/trivial-devices.yaml
@@ -306,10 +306,6 @@ properties:
           - nuvoton,npct601
             # Nuvoton Temperature Sensor
           - nuvoton,w83773g
-            # Octal SMBus and I2C registered interface
-          - nxp,pca9556
-            # 8-bit I2C-bus and SMBus I/O port with reset
-          - nxp,pca9557
             # OKI ML86V7667 video decoder
           - oki,ml86v7667
             # OV5642: Color CMOS QSXGA (5-megapixel) Image Sensor with OmniBSI and Embedded TrueFocus