Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM Device-tree updates from Olof Johansson:
 "Device-tree continues to see lots of updates. The majority of patches
  here are smaller changes for new hardware on existing platforms, and
  there are a few larger changes worth pointing out.

  Major new platforms:

   - Gemini has been ported to DT, so a handful of "new" platforms moved
     over from board files

   - Rockchip RK3288 support for Tinkerboard and Phytec phyCORE-RK3288
     SoM and RDK

   - A bunch of embedded platforms, several Linksys platforms, Synology
     DS116,

   - Motorola Droid4 (really old OMAP-based phone) support is added.

  Some refactorings, i.e. Allwinner H3/H5 support is commonalized.

  And lots of smaller changes, cleanups, etc. See shortlog for more
  description

  We're adding ability to cross-include DT files between arm and arm64,
  by creating appropriate links in the dt-include directory, and using
  arm/ and arm64/ as include prefixes. This will avoid other local hacks
  such as per-file links between the two arch trees (this broke for
  external mirroring of DT contents). Now they can just provide their
  own appropriate dt-include hierarcy per platform"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (349 commits)
  ARM: dts: exynos: Use - instead of @ for DT OPP entries
  arm: spear6xx: add DT description of the ADC on SPEAr600
  arm: spear6xx: remove unneeded pinctrl properties in spear600-evb
  arm: spear6xx: switch spear600-evb to the new flash partition DT binding
  arm: spear6xx: fix spaces in spear600-evb.dts
  arm: spear6xx: use node labels in spear600-evb.dts
  arm: spear6xx: add labels to various nodes in spear600.dtsi
  ARM: dts: vexpress: fix few unit address format warnings
  ARM: dts: at91: sama5d3_xplained: not all ADC channels are available
  ARM: dts: at91: sama5d3_xplained: fix ADC vref
  ARM: dts: at91: add envelope detector mux to the Axentia TSE-850
  ARM: dts: armada-38x: label USB and SATA nodes
  ARM: dts: imx6q-utilite-pro: add hpd gpio
  ARM: dts: imx6qp-sabresd: Set reg_arm regulator supply
  ARM: dts: imx6qdl-sabresd: Set LDO regulator supply
  ARM: dts: imx: add Gateworks Ventana GW5903 support
  ARM: dts: i.MX25: add AIPS control registers
  ARM: dts: imx7-colibri: add Carrier Board 3.3V/5V regulators
  ARM: dts: imx7-colibri: remove 1.8V fixed regulator
  ARM: dts: imx7-colibri: allow to disable Ethernet rail
  ...

16 files changed, 230 insertions, 34 deletions

diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt
index 29737b9b616e..799af90dd75b 100644
--- a/Documentation/devicetree/bindings/arm/atmel-at91.txt
+++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt
@@ -217,7 +217,8 @@ memory, bridge implementations, processor and other functionality not controlled
 elsewhere.
 
 required properties:
-- compatible: Should be "atmel,<chip>-sfr", "syscon".
+- compatible: Should be "atmel,<chip>-sfr", "syscon" or
+	"atmel,<chip>-sfrbu", "syscon"
   <chip> can be "sama5d3", "sama5d4" or "sama5d2".
 - reg: Should contain registers location and length
 
diff --git a/Documentation/devicetree/bindings/arm/gemini.txt b/Documentation/devicetree/bindings/arm/gemini.txt
new file mode 100644
index 000000000000..0041eb031116
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/gemini.txt
@@ -0,0 +1,86 @@
+Cortina systems Gemini platforms
+
+The Gemini SoC is the project name for an ARMv4 FA525-based SoC originally
+produced by Storlink Semiconductor around 2005. The company was renamed
+later renamed Storm Semiconductor. The chip product name is Storlink SL3516.
+It was derived from earlier products from Storm named SL3316 (Centroid) and
+SL3512 (Bulverde).
+
+Storm Semiconductor was acquired by Cortina Systems in 2008 and the SoC was
+produced and used for NAS and similar usecases. In 2014 Cortina Systems was
+in turn acquired by Inphi, who seem to have discontinued this product family.
+
+Many of the IP blocks used in the SoC comes from Faraday Technology.
+
+Required properties (in root node):
+	compatible = "cortina,gemini";
+
+Required nodes:
+
+- soc: the SoC should be represented by a simple bus encompassing all the
+  onchip devices, this is referred to as the soc bus node.
+
+- syscon: the soc bus node must have a system controller node pointing to the
+  global control registers, with the compatible string
+  "cortina,gemini-syscon", "syscon";
+
+- timer: the soc bus node must have a timer node pointing to the SoC timer
+  block, with the compatible string "cortina,gemini-timer"
+  See: clocksource/cortina,gemini-timer.txt
+
+- interrupt-controller: the sob bus node must have an interrupt controller
+  node pointing to the SoC interrupt controller block, with the compatible
+  string "cortina,gemini-interrupt-controller"
+  See interrupt-controller/cortina,gemini-interrupt-controller.txt
+
+Example:
+
+/ {
+	model = "Foo Gemini Machine";
+	compatible = "cortina,gemini";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x8000000>;
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		compatible = "simple-bus";
+		interrupt-parent = <&intcon>;
+
+		syscon: syscon@40000000 {
+			compatible = "cortina,gemini-syscon", "syscon";
+			reg = <0x40000000 0x1000>;
+		};
+
+		uart0: serial@42000000 {
+			compatible = "ns16550a";
+			reg = <0x42000000 0x100>;
+			clock-frequency = <48000000>;
+			interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+		};
+
+		timer@43000000 {
+			compatible = "cortina,gemini-timer";
+			reg = <0x43000000 0x1000>;
+			interrupt-parent = <&intcon>;
+			interrupts = <14 IRQ_TYPE_EDGE_FALLING>, /* Timer 1 */
+				     <15 IRQ_TYPE_EDGE_FALLING>, /* Timer 2 */
+				     <16 IRQ_TYPE_EDGE_FALLING>; /* Timer 3 */
+			syscon = <&syscon>;
+		};
+
+		intcon: interrupt-controller@48000000 {
+			compatible = "cortina,gemini-interrupt-controller";
+			reg = <0x48000000 0x1000>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/arm/i2se.txt b/Documentation/devicetree/bindings/arm/i2se.txt
new file mode 100644
index 000000000000..dbd54a3aa07d
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/i2se.txt
@@ -0,0 +1,22 @@
+I2SE Device Tree Bindings
+-------------------------
+
+Duckbill Board
+Required root node properties:
+    - compatible = "i2se,duckbill", "fsl,imx28";
+
+Duckbill 2 Board
+Required root node properties:
+    - compatible = "i2se,duckbill-2", "fsl,imx28";
+
+Duckbill 2 485 Board
+Required root node properties:
+    - compatible = "i2se,duckbill-2-485", "i2se,duckbill-2", "fsl,imx28";
+
+Duckbill 2 EnOcean Board
+Required root node properties:
+    - compatible = "i2se,duckbill-2-enocean", "i2se,duckbill-2", "fsl,imx28";
+
+Duckbill 2 SPI Board
+Required root node properties:
+    - compatible = "i2se,duckbill-2-spi", "i2se,duckbill-2", "fsl,imx28";
diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt
index cc4ace6397ab..6b8d50a0ee78 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.txt
+++ b/Documentation/devicetree/bindings/arm/rockchip.txt
@@ -1,5 +1,8 @@
 Rockchip platforms device tree bindings
 ---------------------------------------
+- Asus Tinker board
+    Required root node properties:
+      - compatible = "asus,rk3288-tinker", "rockchip,rk3288";
 
 - Kylin RK3036 board:
     Required root node properties:
@@ -103,6 +106,10 @@ Rockchip platforms device tree bindings
     Required root node properties:
       - compatible = "mqmaker,miqi", "rockchip,rk3288";
 
+- Phytec phyCORE-RK3288: Rapid Development Kit
+    Required root node properties:
+     - compatible = "phytec,rk3288-pcm-947", "phytec,rk3288-phycore-som", "rockchip,rk3288";
+
 - Rockchip PX3 Evaluation board:
     Required root node properties:
       - compatible = "rockchip,px3-evb", "rockchip,px3", "rockchip,rk3188";
diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt
index c9502634316d..170fe0562c63 100644
--- a/Documentation/devicetree/bindings/arm/shmobile.txt
+++ b/Documentation/devicetree/bindings/arm/shmobile.txt
@@ -13,8 +13,12 @@ SoCs:
     compatible = "renesas,r8a73a4"
   - R-Mobile A1 (R8A77400)
     compatible = "renesas,r8a7740"
+  - RZ/G1H (R8A77420)
+    compatible = "renesas,r8a7742"
   - RZ/G1M (R8A77430)
     compatible = "renesas,r8a7743"
+  - RZ/G1N (R8A77440)
+    compatible = "renesas,r8a7744"
   - RZ/G1E (R8A77450)
     compatible = "renesas,r8a7745"
   - R-Car M1A (R8A77781)
diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-flowctrl.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-flowctrl.txt
index ccf0adddc820..a855c1bffc0f 100644
--- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-flowctrl.txt
+++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-flowctrl.txt
@@ -1,7 +1,13 @@
 NVIDIA Tegra Flow Controller
 
 Required properties:
-- compatible: Should be "nvidia,tegra<chip>-flowctrl"
+- compatible: Should contain one of the following:
+  - "nvidia,tegra20-flowctrl": for Tegra20
+  - "nvidia,tegra30-flowctrl": for Tegra30
+  - "nvidia,tegra114-flowctrl": for Tegra114
+  - "nvidia,tegra124-flowctrl": for Tegra124
+  - "nvidia,tegra132-flowctrl", "nvidia,tegra124-flowctrl": for Tegra132
+  - "nvidia,tegra210-flowctrl": for Tegra210
 - reg: Should contain one register range (address and length)
 
 Example:
diff --git a/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt
index eb985a633d59..796c260c183d 100644
--- a/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt
+++ b/Documentation/devicetree/bindings/clock/mvebu-core-clock.txt
@@ -31,6 +31,12 @@ The following is a list of provided IDs and clock names on Armada 39x:
  4 = dclk    (SDRAM Interface Clock)
  5 = refclk  (Reference Clock)
 
+The following is a list of provided IDs and clock names on 98dx3236:
+ 0 = tclk    (Internal Bus clock)
+ 1 = cpuclk  (CPU clock)
+ 2 = ddrclk   (DDR clock)
+ 3 = mpll    (MPLL Clock)
+
 The following is a list of provided IDs and clock names on Kirkwood and Dove:
  0 = tclk   (Internal Bus clock)
  1 = cpuclk (CPU0 clock)
@@ -49,6 +55,7 @@ Required properties:
 	"marvell,armada-380-core-clock" - For Armada 380/385 SoC core clocks
 	"marvell,armada-390-core-clock" - For Armada 39x SoC core clocks
 	"marvell,armada-xp-core-clock" - For Armada XP SoC core clocks
+	"marvell,mv98dx3236-core-clock" - For 98dx3236 family SoC core clocks
 	"marvell,dove-core-clock" - for Dove SoC core clocks
 	"marvell,kirkwood-core-clock" - for Kirkwood SoC (except mv88f6180)
 	"marvell,mv88f6180-core-clock" - for Kirkwood MV88f6180 SoC
diff --git a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
index 5142efc8099d..de562da2ae77 100644
--- a/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
+++ b/Documentation/devicetree/bindings/clock/mvebu-gated-clock.txt
@@ -119,6 +119,16 @@ ID	Clock	Peripheral
 29	sata1lnk
 30	sata1	SATA Host 1
 
+The following is a list of provided IDs for 98dx3236:
+ID	Clock	Peripheral
+-----------------------------------
+3	ge1	Gigabit Ethernet 1
+4	ge0	Gigabit Ethernet 0
+5	pex0	PCIe Cntrl 0
+17	sdio	SDHCI Host
+18	usb0	USB Host 0
+22	xor0	XOR DMA 0
+
 The following is a list of provided IDs for Dove:
 ID	Clock	Peripheral
 -----------------------------------
@@ -169,6 +179,7 @@ Required properties:
 	"marvell,armada-380-gating-clock" - for Armada 380/385 SoC clock gating
 	"marvell,armada-390-gating-clock" - for Armada 39x SoC clock gating
 	"marvell,armada-xp-gating-clock" - for Armada XP SoC clock gating
+	"marvell,mv98dx3236-gating-clock" - for 98dx3236 SoC clock gating
 	"marvell,dove-gating-clock" - for Dove SoC clock gating
 	"marvell,kirkwood-gating-clock" - for Kirkwood SoC clock gating
 - reg : shall be the register address of the Clock Gating Control register
diff --git a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt
index d085ef90d27c..f8e946471a58 100644
--- a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt
+++ b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt
@@ -202,23 +202,23 @@ Example2 :
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp@50000000 {
+		opp-50000000 {
 			opp-hz = /bits/ 64 <50000000>;
 			opp-microvolt = <800000>;
 		};
-		opp@100000000 {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 			opp-microvolt = <800000>;
 		};
-		opp@134000000 {
+		opp-134000000 {
 			opp-hz = /bits/ 64 <134000000>;
 			opp-microvolt = <800000>;
 		};
-		opp@200000000 {
+		opp-200000000 {
 			opp-hz = /bits/ 64 <200000000>;
 			opp-microvolt = <825000>;
 		};
-		opp@400000000 {
+		opp-400000000 {
 			opp-hz = /bits/ 64 <400000000>;
 			opp-microvolt = <875000>;
 		};
@@ -292,23 +292,23 @@ Example2 :
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp@50000000 {
+		opp-50000000 {
 			opp-hz = /bits/ 64 <50000000>;
 			opp-microvolt = <900000>;
 		};
-		opp@80000000 {
+		opp-80000000 {
 			opp-hz = /bits/ 64 <80000000>;
 			opp-microvolt = <900000>;
 		};
-		opp@100000000 {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 			opp-microvolt = <1000000>;
 		};
-		opp@134000000 {
+		opp-134000000 {
 			opp-hz = /bits/ 64 <134000000>;
 			opp-microvolt = <1000000>;
 		};
-		opp@200000000 {
+		opp-200000000 {
 			opp-hz = /bits/ 64 <200000000>;
 			opp-microvolt = <1000000>;
 		};
@@ -318,19 +318,19 @@ Example2 :
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp@50000000 {
+		opp-50000000 {
 			opp-hz = /bits/ 64 <50000000>;
 		};
-		opp@80000000 {
+		opp-80000000 {
 			opp-hz = /bits/ 64 <80000000>;
 		};
-		opp@100000000 {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
-		opp@200000000 {
+		opp-200000000 {
 			opp-hz = /bits/ 64 <200000000>;
 		};
-		opp@400000000 {
+		opp-400000000 {
 			opp-hz = /bits/ 64 <400000000>;
 		};
 	};
@@ -339,19 +339,19 @@ Example2 :
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp@50000000 {
+		opp-50000000 {
 			opp-hz = /bits/ 64 <50000000>;
 		};
-		opp@80000000 {
+		opp-80000000 {
 			opp-hz = /bits/ 64 <80000000>;
 		};
-		opp@100000000 {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
-		opp@200000000 {
+		opp-200000000 {
 			opp-hz = /bits/ 64 <200000000>;
 		};
-		opp@300000000 {
+		opp-300000000 {
 			opp-hz = /bits/ 64 <300000000>;
 		};
 	};
@@ -360,13 +360,13 @@ Example2 :
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp@50000000 {
+		opp-50000000 {
 			opp-hz = /bits/ 64 <50000000>;
 		};
-		opp@80000000 {
+		opp-80000000 {
 			opp-hz = /bits/ 64 <80000000>;
 		};
-		opp@100000000 {
+		opp-100000000 {
 			opp-hz = /bits/ 64 <100000000>;
 		};
 	};
diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
index b82c00449468..57a8d0610062 100644
--- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
+++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt
@@ -94,6 +94,7 @@ Required properties:
     * allwinner,sun6i-a31-display-backend
     * allwinner,sun8i-a33-display-backend
   - reg: base address and size of the memory-mapped region.
+  - interrupts: interrupt associated to this IP
   - clocks: phandles to the clocks feeding the frontend and backend
     * ahb: the backend interface clock
     * mod: the backend module clock
@@ -265,6 +266,7 @@ fe0: display-frontend@1e00000 {
 be0: display-backend@1e60000 {
 	compatible = "allwinner,sun5i-a13-display-backend";
 	reg = <0x01e60000 0x10000>;
+	interrupts = <47>;
 	clocks = <&ahb_gates 44>, <&de_be_clk>,
 		 <&dram_gates 26>;
 	clock-names = "ahb", "mod",
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
index 476f5ea6c627..2b6243e730f6 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt
@@ -35,6 +35,14 @@ Optional properties:
   - interrupt-names and interrupts:
     * pmu: Power Management Unit interrupt, if implemented in hardware
 
+  - memory-region:
+    Memory region to allocate from, as defined in
+    Documentation/devicetree/bindi/reserved-memory/reserved-memory.txt
+
+  - operating-points-v2:
+    Operating Points for the GPU, as defined in
+    Documentation/devicetree/bindings/opp/opp.txt
+
 Vendor-specific bindings
 ------------------------
 
diff --git a/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt
index ff3db65e50de..b7e4c7444510 100644
--- a/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt
+++ b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt
@@ -5,6 +5,7 @@ Required properties:
   Currently recognized values:
   - nvidia,gk20a
   - nvidia,gm20b
+  - nvidia,gp10b
 - reg: Physical base address and length of the controller's registers.
   Must contain two entries:
   - first entry for bar0
@@ -14,7 +15,8 @@ Required properties:
 - interrupt-names: Must include the following entries:
   - stall
   - nonstall
-- vdd-supply: regulator for supply voltage.
+- vdd-supply: regulator for supply voltage. Only required for GPUs not using
+  power domains.
 - clocks: Must contain an entry for each entry in clock-names.
   See ../clocks/clock-bindings.txt for details.
 - clock-names: Must include the following entries:
@@ -27,6 +29,8 @@ is also required:
   See ../reset/reset.txt for details.
 - reset-names: Must include the following entries:
   - gpu
+- power-domains: GPUs that make use of power domains can define this property
+  instead of vdd-supply. Currently "nvidia,gp10b" makes use of this.
 
 Optional properties:
 - iommus: A reference to the IOMMU. See ../iommu/iommu.txt for details.
@@ -68,3 +72,22 @@ Example for GM20B:
 		iommus = <&mc TEGRA_SWGROUP_GPU>;
 		status = "disabled";
 	};
+
+Example for GP10B:
+
+	gpu@17000000 {
+		compatible = "nvidia,gp10b";
+		reg = <0x0 0x17000000 0x0 0x1000000>,
+		      <0x0 0x18000000 0x0 0x1000000>;
+		interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH
+			      GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "stall", "nonstall";
+		clocks = <&bpmp TEGRA186_CLK_GPCCLK>,
+			 <&bpmp TEGRA186_CLK_GPU>;
+		clock-names = "gpu", "pwr";
+		resets = <&bpmp TEGRA186_RESET_GPU>;
+		reset-names = "gpu";
+		power-domains = <&bpmp TEGRA186_POWER_DOMAIN_GPU>;
+		iommus = <&smmu TEGRA186_SID_GPU>;
+		status = "disabled";
+	};
diff --git a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt
index 3e920ec5c4d3..9ce35af8507c 100644
--- a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt
+++ b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt
@@ -40,6 +40,7 @@ Required properties:
                  w25x80
                  w25x32
                  w25q32
+                 w25q64
                  w25q32dw
                  w25q80bl
                  w25q128
diff --git a/Documentation/devicetree/bindings/net/marvell,prestera.txt b/Documentation/devicetree/bindings/net/marvell,prestera.txt
index 5fbab29718e8..c329608fa887 100644
--- a/Documentation/devicetree/bindings/net/marvell,prestera.txt
+++ b/Documentation/devicetree/bindings/net/marvell,prestera.txt
@@ -32,19 +32,16 @@ DFX Server bindings
 -------------------
 
 Required properties:
-- compatible: must be "marvell,dfx-server"
+- compatible: must be "marvell,dfx-server", "simple-bus"
+- ranges: describes the address mapping of a memory-mapped bus.
 - reg: address and length of the register set for the device.
 
 Example:
 
-dfx-registers {
-	compatible = "simple-bus";
+dfx-server {
+	compatible = "marvell,dfx-server", "simple-bus";
 	#address-cells = <1>;
 	#size-cells = <1>;
 	ranges = <0 MBUS_ID(0x08, 0x00) 0 0x100000>;
-
-	dfx: dfx@0 {
-		compatible = "marvell,dfx-server";
-		reg = <0 0x100000>;
-	};
+	reg = <MBUS_ID(0x08, 0x00) 0 0x100000>;
 };
diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt
index 6c7c2bce6d0c..00bea038639e 100644
--- a/Documentation/devicetree/bindings/usb/dwc2.txt
+++ b/Documentation/devicetree/bindings/usb/dwc2.txt
@@ -14,6 +14,10 @@ Required properties:
   - "amlogic,meson-gxbb-usb": The DWC2 USB controller instance in Amlogic S905 SoCs;
   - "amcc,dwc-otg": The DWC2 USB controller instance in AMCC Canyonlands 460EX SoCs;
   - snps,dwc2: A generic DWC2 USB controller with default parameters.
+  - "st,stm32f4x9-fsotg": The DWC2 USB FS/HS controller instance in STM32F4x9 SoCs
+  configured in FS mode;
+  - "st,stm32f4x9-hsotg": The DWC2 USB HS controller instance in STM32F4x9 SoCs
+  configured in HS mode;
 - reg : Should contain 1 register range (address and length)
 - interrupts : Should contain 1 interrupt
 - clocks: clock provider specifier
diff --git a/Documentation/devicetree/bindings/watchdog/cortina,gemini-watchdog.txt b/Documentation/devicetree/bindings/watchdog/cortina,gemini-watchdog.txt
new file mode 100644
index 000000000000..bc4b865d178b
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/cortina,gemini-watchdog.txt
@@ -0,0 +1,17 @@
+Cortina Systems Gemini SoC Watchdog
+
+Required properties:
+- compatible : must be "cortina,gemini-watchdog"
+- reg : shall contain base register location and length
+- interrupts : shall contain the interrupt for the watchdog
+
+Optional properties:
+- timeout-sec : the default watchdog timeout in seconds.
+
+Example:
+
+watchdog@41000000 {
+	compatible = "cortina,gemini-watchdog";
+	reg = <0x41000000 0x1000>;
+	interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+};