Merge tag 'linux-watchdog-5.3-rc1' of git://www.linux-watchdog.org/linux-watchdog

Pull watchdog updates from Wim Van Sebroeck:

 - add Allwinner H6 watchdog

 - drop warning after registering device patches

 - hpwdt improvements

 - gpio: add support for nowayout option

 - introduce CONFIG_WATCHDOG_OPEN_TIMEOUT

 - convert remaining drivers to use SPDX license identifier

 - Fixes and improvements on several watchdog device drivers

* tag 'linux-watchdog-5.3-rc1' of git://www.linux-watchdog.org/linux-watchdog: (74 commits)
  watchdog: digicolor_wdt: Remove unused variable in dc_wdt_probe
  watchdog: ie6xx_wdt: Use spinlock_t instead of struct spinlock
  watchdog: atmel: atmel-sama5d4-wdt: Disable watchdog on system suspend
  watchdog: convert remaining drivers to use SPDX license identifier
  dt-bindings: watchdog: Rename bindings documentation file
  watchdog: mei_wdt: no need to check return value of debugfs_create functions
  watchdog: bcm_kona_wdt: no need to check return value of debugfs_create functions
  docs: watchdog: Fix build error.
  docs: watchdog: convert docs to ReST and rename to *.rst
  watchdog: make the device time out at open_deadline when open_timeout is used
  watchdog: introduce CONFIG_WATCHDOG_OPEN_TIMEOUT
  watchdog: introduce watchdog.open_timeout commandline parameter
  dt-bindings: watchdog: move i.MX system controller watchdog binding to SCU
  watchdog: imx_sc: Add pretimeout support
  watchdog: renesas_wdt: Add a few cycles delay
  watchdog: gpio: add support for nowayout option
  watchdog: renesas_wdt: Use 'dev' instead of dereferencing it repeatedly
  dt-bindings: watchdog: add Allwinner H6 watchdog
  watchdog: jz4740: Avoid starting watchdog in set_timeout
  watchdog: jz4740: Use register names from <linux/mfd/ingenic-tcu.h>
  ...

6 files changed, 31 insertions, 24 deletions

diff --git a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
index f378922906f6..a575e42f7fec 100644
--- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
+++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
@@ -145,6 +145,16 @@ Optional Child nodes:
 - Data cells of ocotp:
   Detailed bindings are described in bindings/nvmem/nvmem.txt
 
+Watchdog bindings based on SCU Message Protocol
+------------------------------------------------------------
+
+Required properties:
+- compatible: should be:
+              "fsl,imx8qxp-sc-wdt"
+              followed by "fsl,imx-sc-wdt";
+Optional properties:
+- timeout-sec: contains the watchdog timeout in seconds.
+
 Example (imx8qxp):
 -------------
 aliases {
@@ -207,6 +217,11 @@ firmware {
 		rtc: rtc {
 			compatible = "fsl,imx8qxp-sc-rtc";
 		};
+
+		watchdog {
+			compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
+			timeout-sec = <60>;
+		};
 	};
 };
 
diff --git a/Documentation/devicetree/bindings/watchdog/fsl-imx-sc-wdt.txt b/Documentation/devicetree/bindings/watchdog/fsl-imx-sc-wdt.txt
deleted file mode 100644
index 02b87e92ae68..000000000000
--- a/Documentation/devicetree/bindings/watchdog/fsl-imx-sc-wdt.txt
+++ /dev/null
@@ -1,24 +0,0 @@
-* Freescale i.MX System Controller Watchdog
-
-i.MX system controller watchdog is for i.MX SoCs with system controller inside,
-the watchdog is managed by system controller, users can ONLY communicate with
-system controller from secure mode for watchdog operations, so Linux i.MX system
-controller watchdog driver will call ARM SMC API and trap into ARM-Trusted-Firmware
-for watchdog operations, ARM-Trusted-Firmware is running at secure EL3 mode and
-it will request system controller to execute the watchdog operation passed from
-Linux kernel.
-
-Required properties:
-- compatible:	Should be :
-		"fsl,imx8qxp-sc-wdt"
-		followed by "fsl,imx-sc-wdt";
-
-Optional properties:
-- timeout-sec : Contains the watchdog timeout in seconds.
-
-Examples:
-
-watchdog {
-	compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
-	timeout-sec = <60>;
-};
diff --git a/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt b/Documentation/devicetree/bindings/watchdog/renesas,wdt.txt
index 9f365c1a3399..9f365c1a3399 100644
--- a/Documentation/devicetree/bindings/watchdog/renesas-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/renesas,wdt.txt
diff --git a/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt b/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt
index 46055254e8dd..e65198d82a2b 100644
--- a/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt
@@ -6,6 +6,7 @@ Required properties:
 	"allwinner,sun4i-a10-wdt"
 	"allwinner,sun6i-a31-wdt"
 	"allwinner,sun50i-a64-wdt","allwinner,sun6i-a31-wdt"
+	"allwinner,sun50i-h6-wdt","allwinner,sun6i-a31-wdt"
 	"allwinner,suniv-f1c100s-wdt", "allwinner,sun4i-a10-wdt"
 - reg : Specifies base physical address and size of the registers.
 
diff --git a/Documentation/watchdog/hpwdt.rst b/Documentation/watchdog/hpwdt.rst
index 94a96371113e..c165d92cfd12 100644
--- a/Documentation/watchdog/hpwdt.rst
+++ b/Documentation/watchdog/hpwdt.rst
@@ -39,6 +39,10 @@ Last reviewed: 08/20/2018
                Default value is set when compiling the kernel. If it is set
                to "Y", then there is no way of disabling the watchdog once
                it has been started.
+ kdumptimeout  Minimum timeout in seconds to apply upon receipt of an NMI
+               before calling panic. (-1) disables the watchdog.  When value
+               is > 0, the timer is reprogrammed with the greater of
+               value or current timeout value.
  ============  ================================================================
 
  NOTE:
diff --git a/Documentation/watchdog/watchdog-parameters.rst b/Documentation/watchdog/watchdog-parameters.rst
index b121caae7798..a3985cc5aeda 100644
--- a/Documentation/watchdog/watchdog-parameters.rst
+++ b/Documentation/watchdog/watchdog-parameters.rst
@@ -13,6 +13,17 @@ modules.
 
 -------------------------------------------------
 
+watchdog core:
+    open_timeout:
+	Maximum time, in seconds, for which the watchdog framework will take
+	care of pinging a running hardware watchdog until userspace opens the
+	corresponding /dev/watchdogN device. A value of 0 means an infinite
+	timeout. Setting this to a non-zero value can be useful to ensure that
+	either userspace comes up properly, or the board gets reset and allows
+	fallback logic in the bootloader to try something else.
+
+-------------------------------------------------
+
 acquirewdt:
     wdt_stop:
 	Acquire WDT 'stop' io port (default 0x43)