Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:
 "Small release overall.

  x86:
   - miscellaneous fixes
   - AVIC support (local APIC virtualization, AMD version)

  s390:
   - polling for interrupts after a VCPU goes to halted state is now
     enabled for s390
   - use hardware provided information about facility bits that do not
     need any hypervisor activity, and other fixes for cpu models and
     facilities
   - improve perf output
   - floating interrupt controller improvements.

  MIPS:
   - miscellaneous fixes

  PPC:
   - bugfixes only

  ARM:
   - 16K page size support
   - generic firmware probing layer for timer and GIC

  Christoffer Dall (KVM-ARM maintainer) says:
    "There are a few changes in this pull request touching things
     outside KVM, but they should all carry the necessary acks and it
     made the merge process much easier to do it this way."

  though actually the irqchip maintainers' acks didn't make it into the
  patches.  Marc Zyngier, who is both irqchip and KVM-ARM maintainer,
  later acked at http://mid.gmane.org/573351D1.4060303@arm.com ('more
  formally and for documentation purposes')"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (82 commits)
  KVM: MTRR: remove MSR 0x2f8
  KVM: x86: make hwapic_isr_update and hwapic_irr_update look the same
  svm: Manage vcpu load/unload when enable AVIC
  svm: Do not intercept CR8 when enable AVIC
  svm: Do not expose x2APIC when enable AVIC
  KVM: x86: Introducing kvm_x86_ops.apicv_post_state_restore
  svm: Add VMEXIT handlers for AVIC
  svm: Add interrupt injection via AVIC
  KVM: x86: Detect and Initialize AVIC support
  svm: Introduce new AVIC VMCB registers
  KVM: split kvm_vcpu_wake_up from kvm_vcpu_kick
  KVM: x86: Introducing kvm_x86_ops VCPU blocking/unblocking hooks
  KVM: x86: Introducing kvm_x86_ops VM init/destroy hooks
  KVM: x86: Rename kvm_apic_get_reg to kvm_lapic_get_reg
  KVM: x86: Misc LAPIC changes to expose helper functions
  KVM: shrink halt polling even more for invalid wakeups
  KVM: s390: set halt polling to 80 microseconds
  KVM: halt_polling: provide a way to qualify wakeups during poll
  KVM: PPC: Book3S HV: Re-enable XICS fast path for irqfd-generated interrupts
  kvm: Conditionally register IRQ bypass consumer
  ...

2 files changed, 29 insertions, 3 deletions

diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
index 4d0542c5206b..a4482cce4bae 100644
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
@@ -199,8 +199,8 @@ Type: vm ioctl
 Parameters: vcpu id (apic id on x86)
 Returns: vcpu fd on success, -1 on error
 
-This API adds a vcpu to a virtual machine.  The vcpu id is a small integer
-in the range [0, max_vcpus).
+This API adds a vcpu to a virtual machine. No more than max_vcpus may be added.
+The vcpu id is an integer in the range [0, max_vcpu_id).
 
 The recommended max_vcpus value can be retrieved using the KVM_CAP_NR_VCPUS of
 the KVM_CHECK_EXTENSION ioctl() at run-time.
@@ -212,6 +212,12 @@ cpus max.
 If the KVM_CAP_MAX_VCPUS does not exist, you should assume that max_vcpus is
 same as the value returned from KVM_CAP_NR_VCPUS.
 
+The maximum possible value for max_vcpu_id can be retrieved using the
+KVM_CAP_MAX_VCPU_ID of the KVM_CHECK_EXTENSION ioctl() at run-time.
+
+If the KVM_CAP_MAX_VCPU_ID does not exist, you should assume that max_vcpu_id
+is the same as the value returned from KVM_CAP_MAX_VCPUS.
+
 On powerpc using book3s_hv mode, the vcpus are mapped onto virtual
 threads in one or more virtual CPU cores.  (This is because the
 hardware requires all the hardware threads in a CPU core to be in the
@@ -3788,6 +3794,14 @@ a KVM_EXIT_IOAPIC_EOI vmexit will be reported to userspace.
 Fails if VCPU has already been created, or if the irqchip is already in the
 kernel (i.e. KVM_CREATE_IRQCHIP has already been called).
 
+7.6 KVM_CAP_S390_RI
+
+Architectures: s390
+Parameters: none
+
+Allows use of runtime-instrumentation introduced with zEC12 processor.
+Will return -EINVAL if the machine does not support runtime-instrumentation.
+Will return -EBUSY if a VCPU has already been created.
 
 8. Other capabilities.
 ----------------------
diff --git a/Documentation/virtual/kvm/devices/s390_flic.txt b/Documentation/virtual/kvm/devices/s390_flic.txt
index e3e314cb83e8..6b0e115301c8 100644
--- a/Documentation/virtual/kvm/devices/s390_flic.txt
+++ b/Documentation/virtual/kvm/devices/s390_flic.txt
@@ -11,6 +11,7 @@ FLIC provides support to
 - add interrupts (KVM_DEV_FLIC_ENQUEUE)
 - inspect currently pending interrupts (KVM_FLIC_GET_ALL_IRQS)
 - purge all pending floating interrupts (KVM_DEV_FLIC_CLEAR_IRQS)
+- purge one pending floating I/O interrupt (KVM_DEV_FLIC_CLEAR_IO_IRQ)
 - enable/disable for the guest transparent async page faults
 - register and modify adapter interrupt sources (KVM_DEV_FLIC_ADAPTER_*)
 
@@ -40,6 +41,11 @@ Groups:
     Simply deletes all elements from the list of currently pending floating
     interrupts.  No interrupts are injected into the guest.
 
+  KVM_DEV_FLIC_CLEAR_IO_IRQ
+    Deletes one (if any) I/O interrupt for a subchannel identified by the
+    subsystem identification word passed via the buffer specified by
+    attr->addr (address) and attr->attr (length).
+
   KVM_DEV_FLIC_APF_ENABLE
     Enables async page faults for the guest. So in case of a major page fault
     the host is allowed to handle this async and continues the guest.
@@ -68,7 +74,7 @@ struct kvm_s390_io_adapter {
 
   KVM_DEV_FLIC_ADAPTER_MODIFY
     Modifies attributes of an existing I/O adapter interrupt source. Takes
-    a kvm_s390_io_adapter_req specifiying the adapter and the operation:
+    a kvm_s390_io_adapter_req specifying the adapter and the operation:
 
 struct kvm_s390_io_adapter_req {
 	__u32 id;
@@ -94,3 +100,9 @@ struct kvm_s390_io_adapter_req {
     KVM_S390_IO_ADAPTER_UNMAP
       release a userspace page for the translated address specified in addr
       from the list of mappings
+
+Note: The KVM_SET_DEVICE_ATTR/KVM_GET_DEVICE_ATTR device ioctls executed on
+FLIC with an unknown group or attribute gives the error code EINVAL (instead of
+ENXIO, as specified in the API documentation). It is not possible to conclude
+that a FLIC operation is unavailable based on the error code resulting from a
+usage attempt.