summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorDave Airlie <airlied@redhat.com>2015-07-17 10:24:34 +1000
committerDave Airlie <airlied@redhat.com>2015-07-17 10:24:34 +1000
commite1e50e1e1e2d0e515527f0f10b1c495100e582d1 (patch)
tree2925da84771ff17bf5ee76ed569a4c50a666a450 /Documentation
parent8f6644ca9737d118d80bffacc9ae940e713959c4 (diff)
parentc03e9a3a9b54685c2f6c13fc137281d262442bb3 (diff)
downloadlinux-e1e50e1e1e2d0e515527f0f10b1c495100e582d1.tar.bz2
Merge tag 'imx-drm-fixes-2015-07-14' of git://git.pengutronix.de/git/pza/linux into drm-fixes
imx-drm: fixes for parallel-display, imx-tve, and ipu-common These patches fix the parallel-display driver to use the standard OF graph bindings for connecting a drm_panel via device tree instead of an undocumented, driver specific device tree property, take care to disable all IPU interrupts before setting up the irq chip to fix a kexec lockup, and fix VGA output on i.MX53-QSB boards by correcting the media bus format set by the imx-tve driver. * tag 'imx-drm-fixes-2015-07-14' of git://git.pengutronix.de/git/pza/linux: drm/imx: tve: fix media bus format for VGA output GPU: ipu: fix lockup caused by pending chained interrupts drm/imx: parallel-display: fix drm_panel support
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt26
1 files changed, 24 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt b/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt
index e75f0e549fff..971c3eedb1c7 100644
--- a/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt
+++ b/Documentation/devicetree/bindings/drm/imx/fsl-imx-drm.txt
@@ -65,8 +65,10 @@ Optional properties:
- edid: verbatim EDID data block describing attached display.
- ddc: phandle describing the i2c bus handling the display data
channel
-- port: A port node with endpoint definitions as defined in
+- port@[0-1]: Port nodes with endpoint definitions as defined in
Documentation/devicetree/bindings/media/video-interfaces.txt.
+ Port 0 is the input port connected to the IPU display interface,
+ port 1 is the output port connected to a panel.
example:
@@ -75,9 +77,29 @@ display@di0 {
edid = [edid-data];
interface-pix-fmt = "rgb24";
- port {
+ port@0 {
+ reg = <0>;
+
display_in: endpoint {
remote-endpoint = <&ipu_di0_disp0>;
};
};
+
+ port@1 {
+ reg = <1>;
+
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+};
+
+panel {
+ ...
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
};