summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2018-06-07 12:45:58 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2018-06-07 12:45:58 -0700
commit3a3869f1c443383ef8354ffa0e5fb8df65d8b549 (patch)
tree7972a4444f04a91f4baab5896df33d4e55d9909d /Documentation
parent3036bc45364f98515a2c446d7fac2c34dcfbeff4 (diff)
parent488ad6d3678beee65bcd74e6a9764bd7cee9d3d3 (diff)
downloadlinux-3a3869f1c443383ef8354ffa0e5fb8df65d8b549.tar.bz2
Merge tag 'pci-v4.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI updates from Bjorn Helgaas: - unify AER decoding for native and ACPI CPER sources (Alexandru Gagniuc) - add TLP header info to AER tracepoint (Thomas Tai) - add generic pcie_wait_for_link() interface (Oza Pawandeep) - handle AER ERR_FATAL by removing and re-enumerating devices, as Downstream Port Containment does (Oza Pawandeep) - factor out common code between AER and DPC recovery (Oza Pawandeep) - stop triggering DPC for ERR_NONFATAL errors (Oza Pawandeep) - share ERR_FATAL recovery path between AER and DPC (Oza Pawandeep) - disable ASPM L1.2 substate if we don't have LTR (Bjorn Helgaas) - respect platform ownership of LTR (Bjorn Helgaas) - clear interrupt status in top half to avoid interrupt storm (Oza Pawandeep) - neaten pci=earlydump output (Andy Shevchenko) - avoid errors when extended config space inaccessible (Gilles Buloz) - prevent sysfs disable of device while driver attached (Christoph Hellwig) - use core interface to report PCIe link properties in bnx2x, bnxt_en, cxgb4, ixgbe (Bjorn Helgaas) - remove unused pcie_get_minimum_link() (Bjorn Helgaas) - fix use-before-set error in ibmphp (Dan Carpenter) - fix pciehp timeouts caused by Command Completed errata (Bjorn Helgaas) - fix refcounting in pnv_php hotplug (Julia Lawall) - clear pciehp Presence Detect and Data Link Layer Status Changed on resume so we don't miss hotplug events (Mika Westerberg) - only request pciehp control if we support it, so platform can use ACPI hotplug otherwise (Mika Westerberg) - convert SHPC to be builtin only (Mika Westerberg) - request SHPC control via _OSC if we support it (Mika Westerberg) - simplify SHPC handoff from firmware (Mika Westerberg) - fix an SHPC quirk that mistakenly included *all* AMD bridges as well as devices from any vendor with device ID 0x7458 (Bjorn Helgaas) - assign a bus number even to non-native hotplug bridges to leave space for acpiphp additions, to fix a common Thunderbolt xHCI hot-add failure (Mika Westerberg) - keep acpiphp from scanning native hotplug bridges, to fix common Thunderbolt hot-add failures (Mika Westerberg) - improve "partially hidden behind bridge" messages from core (Mika Westerberg) - add macros for PCIe Link Control 2 register (Frederick Lawler) - replace IB/hfi1 custom macros with PCI core versions (Frederick Lawler) - remove dead microblaze and xtensa code (Bjorn Helgaas) - use dev_printk() when possible in xtensa and mips (Bjorn Helgaas) - remove unused pcie_port_acpi_setup() and portdrv_acpi.c (Bjorn Helgaas) - add managed interface to get PCI host bridge resources from OF (Jan Kiszka) - add support for unbinding generic PCI host controller (Jan Kiszka) - fix memory leaks when unbinding generic PCI host controller (Jan Kiszka) - request legacy VGA framebuffer only for VGA devices to avoid false device conflicts (Bjorn Helgaas) - turn on PCI_COMMAND_IO & PCI_COMMAND_MEMORY in pci_enable_device() like everybody else, not in pcibios_fixup_bus() (Bjorn Helgaas) - add generic enable function for simple SR-IOV hardware (Alexander Duyck) - use generic SR-IOV enable for ena, nvme (Alexander Duyck) - add ACS quirk for Intel 7th & 8th Gen mobile (Alex Williamson) - add ACS quirk for Intel 300 series (Mika Westerberg) - enable register clock for Armada 7K/8K (Gregory CLEMENT) - reduce Keystone "link already up" log level (Fabio Estevam) - move private DT functions to drivers/pci/ (Rob Herring) - factor out dwc CONFIG_PCI Kconfig dependencies (Rob Herring) - add DesignWare support to the endpoint test driver (Gustavo Pimentel) - add DesignWare support for endpoint mode (Gustavo Pimentel) - use devm_ioremap_resource() instead of devm_ioremap() in dra7xx and artpec6 (Gustavo Pimentel) - fix Qualcomm bitwise NOT issue (Dan Carpenter) - add Qualcomm runtime PM support (Srinivas Kandagatla) - fix DesignWare enumeration below bridges (Koen Vandeputte) - use usleep() instead of mdelay() in endpoint test (Jia-Ju Bai) - add configfs entries for pci_epf_driver device IDs (Kishon Vijay Abraham I) - clean up pci_endpoint_test driver (Gustavo Pimentel) - update Layerscape maintainer email addresses (Minghuan Lian) - add COMPILE_TEST to improve build test coverage (Rob Herring) - fix Hyper-V bus registration failure caused by domain/serial number confusion (Sridhar Pitchai) - improve Hyper-V refcounting and coding style (Stephen Hemminger) - avoid potential Hyper-V hang waiting for a response that will never come (Dexuan Cui) - implement Mediatek chained IRQ handling (Honghui Zhang) - fix vendor ID & class type for Mediatek MT7622 (Honghui Zhang) - add Mobiveil PCIe host controller driver (Subrahmanya Lingappa) - add Mobiveil MSI support (Subrahmanya Lingappa) - clean up clocks, MSI, IRQ mappings in R-Car probe failure paths (Marek Vasut) - poll more frequently (5us vs 5ms) while waiting for R-Car data link active (Marek Vasut) - use generic OF parsing interface in R-Car (Vladimir Zapolskiy) - add R-Car V3H (R8A77980) "compatible" string (Sergei Shtylyov) - add R-Car gen3 PHY support (Sergei Shtylyov) - improve R-Car PHYRDY polling (Sergei Shtylyov) - clean up R-Car macros (Marek Vasut) - use runtime PM for R-Car controller clock (Dien Pham) - update arm64 defconfig for Rockchip (Shawn Lin) - refactor Rockchip code to facilitate both root port and endpoint mode (Shawn Lin) - add Rockchip endpoint mode driver (Shawn Lin) - support VMD "membar shadow" feature (Jon Derrick) - support VMD bus number offsets (Jon Derrick) - add VMD "no AER source ID" quirk for more device IDs (Jon Derrick) - remove unnecessary host controller CONFIG_PCIEPORTBUS Kconfig selections (Bjorn Helgaas) - clean up quirks.c organization and whitespace (Bjorn Helgaas) * tag 'pci-v4.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (144 commits) PCI/AER: Replace struct pcie_device with pci_dev PCI/AER: Remove unused parameters PCI: qcom: Include gpio/consumer.h PCI: Improve "partially hidden behind bridge" log message PCI: Improve pci_scan_bridge() and pci_scan_bridge_extend() doc PCI: Move resource distribution for single bridge outside loop PCI: Account for all bridges on bus when distributing bus numbers ACPI / hotplug / PCI: Drop unnecessary parentheses ACPI / hotplug / PCI: Mark stale PCI devices disconnected ACPI / hotplug / PCI: Don't scan bridges managed by native hotplug PCI: hotplug: Add hotplug_is_native() PCI: shpchp: Add shpchp_is_native() PCI: shpchp: Fix AMD POGO identification PCI: mobiveil: Add MSI support PCI: mobiveil: Add Mobiveil PCIe Host Bridge IP driver PCI/AER: Decode Error Source Requester ID PCI/AER: Remove aer_recover_work_func() forward declaration PCI/DPC: Use the generic pcie_do_fatal_recovery() path PCI/AER: Pass service type to pcie_do_fatal_recovery() PCI/DPC: Disable ERR_NONFATAL handling by DPC ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/PCI/pci-error-recovery.txt35
-rw-r--r--Documentation/admin-guide/kernel-parameters.txt2
-rw-r--r--Documentation/devicetree/bindings/pci/designware-pcie.txt24
-rw-r--r--Documentation/devicetree/bindings/pci/mobiveil-pcie.txt73
-rw-r--r--Documentation/devicetree/bindings/pci/pci-armada8k.txt5
-rw-r--r--Documentation/devicetree/bindings/pci/rcar-pci.txt6
-rw-r--r--Documentation/devicetree/bindings/pci/rockchip-pcie-ep.txt62
-rw-r--r--Documentation/devicetree/bindings/pci/rockchip-pcie-host.txt (renamed from Documentation/devicetree/bindings/pci/rockchip-pcie.txt)0
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt1
9 files changed, 191 insertions, 17 deletions
diff --git a/Documentation/PCI/pci-error-recovery.txt b/Documentation/PCI/pci-error-recovery.txt
index 0b6bb3ef449e..688b69121e82 100644
--- a/Documentation/PCI/pci-error-recovery.txt
+++ b/Documentation/PCI/pci-error-recovery.txt
@@ -110,7 +110,7 @@ The actual steps taken by a platform to recover from a PCI error
event will be platform-dependent, but will follow the general
sequence described below.
-STEP 0: Error Event
+STEP 0: Error Event: ERR_NONFATAL
-------------------
A PCI bus error is detected by the PCI hardware. On powerpc, the slot
is isolated, in that all I/O is blocked: all reads return 0xffffffff,
@@ -228,13 +228,7 @@ proceeds to either STEP3 (Link Reset) or to STEP 5 (Resume Operations).
If any driver returned PCI_ERS_RESULT_NEED_RESET, then the platform
proceeds to STEP 4 (Slot Reset)
-STEP 3: Link Reset
-------------------
-The platform resets the link. This is a PCI-Express specific step
-and is done whenever a fatal error has been detected that can be
-"solved" by resetting the link.
-
-STEP 4: Slot Reset
+STEP 3: Slot Reset
------------------
In response to a return value of PCI_ERS_RESULT_NEED_RESET, the
@@ -320,7 +314,7 @@ Failure).
>>> However, it probably should.
-STEP 5: Resume Operations
+STEP 4: Resume Operations
-------------------------
The platform will call the resume() callback on all affected device
drivers if all drivers on the segment have returned
@@ -332,7 +326,7 @@ a result code.
At this point, if a new error happens, the platform will restart
a new error recovery sequence.
-STEP 6: Permanent Failure
+STEP 5: Permanent Failure
-------------------------
A "permanent failure" has occurred, and the platform cannot recover
the device. The platform will call error_detected() with a
@@ -355,6 +349,27 @@ errors. See the discussion in powerpc/eeh-pci-error-recovery.txt
for additional detail on real-life experience of the causes of
software errors.
+STEP 0: Error Event: ERR_FATAL
+-------------------
+PCI bus error is detected by the PCI hardware. On powerpc, the slot is
+isolated, in that all I/O is blocked: all reads return 0xffffffff, all
+writes are ignored.
+
+STEP 1: Remove devices
+--------------------
+Platform removes the devices depending on the error agent, it could be
+this port for all subordinates or upstream component (likely downstream
+port)
+
+STEP 2: Reset link
+--------------------
+The platform resets the link. This is a PCI-Express specific step and is
+done whenever a fatal error has been detected that can be "solved" by
+resetting the link.
+
+STEP 3: Re-enumerate the devices
+--------------------
+Initiates the re-enumeration.
Conclusion; General Remarks
---------------------------
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 1beb30d8d7fc..20cc45602f45 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -3162,6 +3162,8 @@
on: Turn realloc on
realloc same as realloc=on
noari do not use PCIe ARI.
+ noats [PCIE, Intel-IOMMU, AMD-IOMMU]
+ do not use PCIe ATS (and IOMMU device IOTLB).
pcie_scan_all Scan all possible PCIe devices. Otherwise we
only look for one device below a PCIe downstream
port.
diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt
index 1da7ade3183c..c124f9bc11f3 100644
--- a/Documentation/devicetree/bindings/pci/designware-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt
@@ -1,7 +1,9 @@
* Synopsys DesignWare PCIe interface
Required properties:
-- compatible: should contain "snps,dw-pcie" to identify the core.
+- compatible:
+ "snps,dw-pcie" for RC mode;
+ "snps,dw-pcie-ep" for EP mode;
- reg: Should contain the configuration address space.
- reg-names: Must be "config" for the PCIe configuration space.
(The old way of getting the configuration address space from "ranges"
@@ -41,11 +43,11 @@ EP mode:
Example configuration:
- pcie: pcie@dffff000 {
+ pcie: pcie@dfc00000 {
compatible = "snps,dw-pcie";
- reg = <0xdffff000 0x1000>, /* Controller registers */
- <0xd0000000 0x2000>; /* PCI config space */
- reg-names = "ctrlreg", "config";
+ reg = <0xdfc00000 0x0001000>, /* IP registers */
+ <0xd0000000 0x0002000>; /* Configuration space */
+ reg-names = "dbi", "config";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
@@ -54,5 +56,15 @@ Example configuration:
interrupts = <25>, <24>;
#interrupt-cells = <1>;
num-lanes = <1>;
- num-viewport = <3>;
+ };
+or
+ pcie: pcie@dfc00000 {
+ compatible = "snps,dw-pcie-ep";
+ reg = <0xdfc00000 0x0001000>, /* IP registers 1 */
+ <0xdfc01000 0x0001000>, /* IP registers 2 */
+ <0xd0000000 0x2000000>; /* Configuration space */
+ reg-names = "dbi", "dbi2", "addr_space";
+ num-ib-windows = <6>;
+ num-ob-windows = <2>;
+ num-lanes = <1>;
};
diff --git a/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt b/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt
new file mode 100644
index 000000000000..65038aa642e5
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/mobiveil-pcie.txt
@@ -0,0 +1,73 @@
+* Mobiveil AXI PCIe Root Port Bridge DT description
+
+Mobiveil's GPEX 4.0 is a PCIe Gen4 root port bridge IP. This configurable IP
+has up to 8 outbound and inbound windows for the address translation.
+
+Required properties:
+- #address-cells: Address representation for root ports, set to <3>
+- #size-cells: Size representation for root ports, set to <2>
+- #interrupt-cells: specifies the number of cells needed to encode an
+ interrupt source. The value must be 1.
+- compatible: Should contain "mbvl,gpex40-pcie"
+- reg: Should contain PCIe registers location and length
+ "config_axi_slave": PCIe controller registers
+ "csr_axi_slave" : Bridge config registers
+ "gpio_slave" : GPIO registers to control slot power
+ "apb_csr" : MSI registers
+
+- device_type: must be "pci"
+- apio-wins : number of requested apio outbound windows
+ default 2 outbound windows are configured -
+ 1. Config window
+ 2. Memory window
+- ppio-wins : number of requested ppio inbound windows
+ default 1 inbound memory window is configured.
+- bus-range: PCI bus numbers covered
+- interrupt-controller: identifies the node as an interrupt controller
+- #interrupt-cells: specifies the number of cells needed to encode an
+ interrupt source. The value must be 1.
+- interrupt-parent : phandle to the interrupt controller that
+ it is attached to, it should be set to gic to point to
+ ARM's Generic Interrupt Controller node in system DT.
+- interrupts: The interrupt line of the PCIe controller
+ last cell of this field is set to 4 to
+ denote it as IRQ_TYPE_LEVEL_HIGH type interrupt.
+- interrupt-map-mask,
+ interrupt-map: standard PCI properties to define the mapping of the
+ PCI interface to interrupt numbers.
+- ranges: ranges for the PCI memory regions (I/O space region is not
+ supported by hardware)
+ Please refer to the standard PCI bus binding document for a more
+ detailed explanation
+
+
+Example:
+++++++++
+ pcie0: pcie@a0000000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ compatible = "mbvl,gpex40-pcie";
+ reg = <0xa0000000 0x00001000>,
+ <0xb0000000 0x00010000>,
+ <0xff000000 0x00200000>,
+ <0xb0010000 0x00001000>;
+ reg-names = "config_axi_slave",
+ "csr_axi_slave",
+ "gpio_slave",
+ "apb_csr";
+ device_type = "pci";
+ apio-wins = <2>;
+ ppio-wins = <1>;
+ bus-range = <0x00000000 0x000000ff>;
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ #interrupt-cells = <1>;
+ interrupts = < 0 89 4 >;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 0 &pci_express 0>,
+ <0 0 0 1 &pci_express 1>,
+ <0 0 0 2 &pci_express 2>,
+ <0 0 0 3 &pci_express 3>;
+ ranges = < 0x83000000 0 0x00000000 0xa8000000 0 0x8000000>;
+
+ };
diff --git a/Documentation/devicetree/bindings/pci/pci-armada8k.txt b/Documentation/devicetree/bindings/pci/pci-armada8k.txt
index c1e4c3d10a74..9e3fc15e1af8 100644
--- a/Documentation/devicetree/bindings/pci/pci-armada8k.txt
+++ b/Documentation/devicetree/bindings/pci/pci-armada8k.txt
@@ -12,7 +12,10 @@ Required properties:
- "ctrl" for the control register region
- "config" for the config space region
- interrupts: Interrupt specifier for the PCIe controler
-- clocks: reference to the PCIe controller clock
+- clocks: reference to the PCIe controller clocks
+- clock-names: mandatory if there is a second clock, in this case the
+ name must be "core" for the first clock and "reg" for the second
+ one
Example:
diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/Documentation/devicetree/bindings/pci/rcar-pci.txt
index 1fb614e615da..a5f7fc62d10e 100644
--- a/Documentation/devicetree/bindings/pci/rcar-pci.txt
+++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt
@@ -8,6 +8,7 @@ compatible: "renesas,pcie-r8a7743" for the R8A7743 SoC;
"renesas,pcie-r8a7793" for the R8A7793 SoC;
"renesas,pcie-r8a7795" for the R8A7795 SoC;
"renesas,pcie-r8a7796" for the R8A7796 SoC;
+ "renesas,pcie-r8a77980" for the R8A77980 SoC;
"renesas,pcie-rcar-gen2" for a generic R-Car Gen2 or
RZ/G1 compatible device.
"renesas,pcie-rcar-gen3" for a generic R-Car Gen3 compatible device.
@@ -32,6 +33,11 @@ compatible: "renesas,pcie-r8a7743" for the R8A7743 SoC;
and PCIe bus clocks.
- clock-names: from common clock binding: should be "pcie" and "pcie_bus".
+Optional properties:
+- phys: from common PHY binding: PHY phandle and specifier (only make sense
+ for R-Car gen3 SoCs where the PCIe PHYs have their own register blocks).
+- phy-names: from common PHY binding: should be "pcie".
+
Example:
SoC-specific DT Entry:
diff --git a/Documentation/devicetree/bindings/pci/rockchip-pcie-ep.txt b/Documentation/devicetree/bindings/pci/rockchip-pcie-ep.txt
new file mode 100644
index 000000000000..778467307a93
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/rockchip-pcie-ep.txt
@@ -0,0 +1,62 @@
+* Rockchip AXI PCIe Endpoint Controller DT description
+
+Required properties:
+- compatible: Should contain "rockchip,rk3399-pcie-ep"
+- reg: Two register ranges as listed in the reg-names property
+- reg-names: Must include the following names
+ - "apb-base"
+ - "mem-base"
+- clocks: Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+ - "aclk"
+ - "aclk-perf"
+ - "hclk"
+ - "pm"
+- resets: Must contain seven entries for each entry in reset-names.
+ See ../reset/reset.txt for details.
+- reset-names: Must include the following names
+ - "core"
+ - "mgmt"
+ - "mgmt-sticky"
+ - "pipe"
+ - "pm"
+ - "aclk"
+ - "pclk"
+- pinctrl-names : The pin control state names
+- pinctrl-0: The "default" pinctrl state
+- phys: Must contain an phandle to a PHY for each entry in phy-names.
+- phy-names: Must include 4 entries for all 4 lanes even if some of
+ them won't be used for your cases. Entries are of the form "pcie-phy-N":
+ where N ranges from 0 to 3.
+ (see example below and you MUST also refer to ../phy/rockchip-pcie-phy.txt
+ for changing the #phy-cells of phy node to support it)
+- rockchip,max-outbound-regions: Maximum number of outbound regions
+
+Optional Property:
+- num-lanes: number of lanes to use
+- max-functions: Maximum number of functions that can be configured (default 1).
+
+pcie0-ep: pcie@f8000000 {
+ compatible = "rockchip,rk3399-pcie-ep";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ rockchip,max-outbound-regions = <16>;
+ clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>,
+ <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>;
+ clock-names = "aclk", "aclk-perf",
+ "hclk", "pm";
+ max-functions = /bits/ 8 <8>;
+ num-lanes = <4>;
+ reg = <0x0 0xfd000000 0x0 0x1000000>, <0x0 0x80000000 0x0 0x20000>;
+ reg-names = "apb-base", "mem-base";
+ resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
+ <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE> ,
+ <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, <&cru SRST_A_PCIE>;
+ reset-names = "core", "mgmt", "mgmt-sticky", "pipe",
+ "pm", "pclk", "aclk";
+ phys = <&pcie_phy 0>, <&pcie_phy 1>, <&pcie_phy 2>, <&pcie_phy 3>;
+ phy-names = "pcie-phy-0", "pcie-phy-1", "pcie-phy-2", "pcie-phy-3";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_clkreq>;
+};
diff --git a/Documentation/devicetree/bindings/pci/rockchip-pcie.txt b/Documentation/devicetree/bindings/pci/rockchip-pcie-host.txt
index af34c65773fd..af34c65773fd 100644
--- a/Documentation/devicetree/bindings/pci/rockchip-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/rockchip-pcie-host.txt
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 36003832c2a8..74e9db9e9088 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -205,6 +205,7 @@ lwn Liebherr-Werk Nenzing GmbH
macnica Macnica Americas
marvell Marvell Technology Group Ltd.
maxim Maxim Integrated Products
+mbvl Mobiveil Inc.
mcube mCube
meas Measurement Specialties
mediatek MediaTek Inc.