summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2019-12-01 18:29:36 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2019-12-01 18:29:36 -0800
commit3265568db8c37d391ee8ad2afa8b0fd7257f4526 (patch)
tree70723d4c0eed9b76f64090dfc1652289e6eb9b36 /Documentation
parent31764f1b6d93e126ed341fb600d2765d630e8bf6 (diff)
parenta72e27f7a47069b1b4942051bffa7dc77b4aee0c (diff)
downloadlinux-3265568db8c37d391ee8ad2afa8b0fd7257f4526.tar.bz2
Merge branch 'i2c/for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang: "I2C has mostly driver updates this time. The few noteworthy changes are: the core has now support for analog and digital filters with at91 being the first user, a core addition to replace the NULL returning i2c_new_probed_device() with an ERR_PTR variant, and the pxa driver has finally being moved to use the generic I2C slave interface. We have quite a significant number of reviews per patch this time, so thank you to all involved!" * 'i2c/for-5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (37 commits) video: fbdev: matrox: convert to i2c_new_scanned_device i2c: icy: convert to i2c_new_scanned_device i2c: replace i2c_new_probed_device with an ERR_PTR variant i2c: Fix Kconfig indentation i2c: smbus: Don't filter out duplicate alerts i2c: i801: Correct Intel Jasper Lake SOC naming i2c: i2c-stm32f7: fix 10-bits check in slave free id search loop i2c: iproc: Add i2c repeated start capability i2c: remove helpers for ref-counting clients i2c: tegra: Use dma_request_chan() directly for channel request i2c: sh_mobile: Use dma_request_chan() directly for channel request i2c: qup: Use dma_request_chan() directly for channel request i2c: at91: Use dma_request_chan() directly for channel request i2c: rcar: Remove superfluous call to clk_get_rate() i2c: pxa: remove unused i2c-slave APIs i2c: pxa: migrate to new i2c_slave APIs i2c: cros-ec-tunnel: Make the device acpi compatible i2c: stm32f7: report dma error during probe i2c: icy: no need to populate address for scanned device i2c: xiic: Fix kerneldoc warnings ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml53
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-aspeed.txt3
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-at91.txt3
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-meson.txt30
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c.txt18
-rw-r--r--Documentation/devicetree/bindings/i2c/renesas,i2c.txt1
-rw-r--r--Documentation/devicetree/bindings/i2c/renesas,iic.txt1
-rw-r--r--Documentation/i2c/busses/i2c-i801.rst1
-rw-r--r--Documentation/i2c/instantiating-devices.rst10
-rw-r--r--Documentation/i2c/writing-clients.rst8
10 files changed, 87 insertions, 41 deletions
diff --git a/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml b/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml
new file mode 100644
index 000000000000..49cad273c8e5
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/amlogic,meson6-i2c.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/i2c/amlogic,meson6-i2c.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic Meson I2C Controller
+
+maintainers:
+ - Neil Armstrong <narmstrong@baylibre.com>
+ - Beniamino Galvani <b.galvani@gmail.com>
+
+allOf:
+ - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+ compatible:
+ enum:
+ - amlogic,meson6-i2c # Meson6, Meson8 and compatible SoCs
+ - amlogic,meson-gxbb-i2c # GXBB and compatible SoCs
+ - amlogic,meson-axg-i2c # AXG and compatible SoCs
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+
+examples:
+ - |
+ i2c@c8100500 {
+ compatible = "amlogic,meson6-i2c";
+ reg = <0xc8100500 0x20>;
+ interrupts = <92>;
+ clocks = <&clk81>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ eeprom@52 {
+ compatible = "atmel,24c32";
+ reg = <0x52>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt b/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
index 8fbd8633a387..b47f6ccb196a 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
@@ -1,4 +1,4 @@
-Device tree configuration for the I2C busses on the AST24XX and AST25XX SoCs.
+Device tree configuration for the I2C busses on the AST24XX, AST25XX, and AST26XX SoCs.
Required Properties:
- #address-cells : should be 1
@@ -6,6 +6,7 @@ Required Properties:
- reg : address offset and range of bus
- compatible : should be "aspeed,ast2400-i2c-bus"
or "aspeed,ast2500-i2c-bus"
+ or "aspeed,ast2600-i2c-bus"
- clocks : root clock of bus, should reference the APB
clock in the second cell
- resets : phandle to reset controller with the reset number in
diff --git a/Documentation/devicetree/bindings/i2c/i2c-at91.txt b/Documentation/devicetree/bindings/i2c/i2c-at91.txt
index b7cec17c3daf..2210f4359c45 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-at91.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-at91.txt
@@ -3,7 +3,8 @@ I2C for Atmel platforms
Required properties :
- compatible : Must be "atmel,at91rm9200-i2c", "atmel,at91sam9261-i2c",
"atmel,at91sam9260-i2c", "atmel,at91sam9g20-i2c", "atmel,at91sam9g10-i2c",
- "atmel,at91sam9x5-i2c", "atmel,sama5d4-i2c" or "atmel,sama5d2-i2c"
+ "atmel,at91sam9x5-i2c", "atmel,sama5d4-i2c", "atmel,sama5d2-i2c" or
+ "microchip,sam9x60-i2c"
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: interrupt number to the cpu.
diff --git a/Documentation/devicetree/bindings/i2c/i2c-meson.txt b/Documentation/devicetree/bindings/i2c/i2c-meson.txt
deleted file mode 100644
index 13d410de077c..000000000000
--- a/Documentation/devicetree/bindings/i2c/i2c-meson.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-Amlogic Meson I2C controller
-
-Required properties:
- - compatible: must be:
- "amlogic,meson6-i2c" for Meson8 and compatible SoCs
- "amlogic,meson-gxbb-i2c" for GXBB and compatible SoCs
- "amlogic,meson-axg-i2c"for AXG and compatible SoCs
-
- - reg: physical address and length of the device registers
- - interrupts: a single interrupt specifier
- - clocks: clock for the device
- - #address-cells: should be <1>
- - #size-cells: should be <0>
-
-For details regarding the following core I2C bindings see also i2c.txt.
-
-Optional properties:
-- clock-frequency: the desired I2C bus clock frequency in Hz; in
- absence of this property the default value is used (100 kHz).
-
-Examples:
-
- i2c@c8100500 {
- compatible = "amlogic,meson6-i2c";
- reg = <0xc8100500 0x20>;
- interrupts = <0 92 1>;
- clocks = <&clk81>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
diff --git a/Documentation/devicetree/bindings/i2c/i2c.txt b/Documentation/devicetree/bindings/i2c/i2c.txt
index 44efafdfd7f5..9a53df4243c6 100644
--- a/Documentation/devicetree/bindings/i2c/i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c.txt
@@ -55,6 +55,24 @@ wants to support one of the below features, it should adapt the bindings below.
Number of nanoseconds the SDA signal takes to fall; t(f) in the I2C
specification.
+- i2c-analog-filter
+ Enable analog filter for i2c lines.
+
+- i2c-digital-filter
+ Enable digital filter for i2c lines.
+
+- i2c-digital-filter-width-ns
+ Width of spikes which can be filtered by digital filter
+ (i2c-digital-filter). This width is specified in nanoseconds.
+
+- i2c-analog-filter-cutoff-frequency
+ Frequency that the analog filter (i2c-analog-filter) uses to distinguish
+ which signal to filter. Signal with higher frequency than specified will
+ be filtered out. Only lower frequency will pass (this is applicable to
+ a low-pass analog filter). Typical value should be above the normal
+ i2c bus clock frequency (clock-frequency).
+ Specified in Hz.
+
- interrupts
interrupts used by the device.
diff --git a/Documentation/devicetree/bindings/i2c/renesas,i2c.txt b/Documentation/devicetree/bindings/i2c/renesas,i2c.txt
index 3ee5e8f6ee01..0660a3eb2547 100644
--- a/Documentation/devicetree/bindings/i2c/renesas,i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/renesas,i2c.txt
@@ -7,6 +7,7 @@ Required properties:
"renesas,i2c-r8a7745" if the device is a part of a R8A7745 SoC.
"renesas,i2c-r8a77470" if the device is a part of a R8A77470 SoC.
"renesas,i2c-r8a774a1" if the device is a part of a R8A774A1 SoC.
+ "renesas,i2c-r8a774b1" if the device is a part of a R8A774B1 SoC.
"renesas,i2c-r8a774c0" if the device is a part of a R8A774C0 SoC.
"renesas,i2c-r8a7778" if the device is a part of a R8A7778 SoC.
"renesas,i2c-r8a7779" if the device is a part of a R8A7779 SoC.
diff --git a/Documentation/devicetree/bindings/i2c/renesas,iic.txt b/Documentation/devicetree/bindings/i2c/renesas,iic.txt
index 202602e6e837..64d11ffb07c4 100644
--- a/Documentation/devicetree/bindings/i2c/renesas,iic.txt
+++ b/Documentation/devicetree/bindings/i2c/renesas,iic.txt
@@ -8,6 +8,7 @@ Required properties:
- "renesas,iic-r8a7744" (RZ/G1N)
- "renesas,iic-r8a7745" (RZ/G1E)
- "renesas,iic-r8a774a1" (RZ/G2M)
+ - "renesas,iic-r8a774b1" (RZ/G2N)
- "renesas,iic-r8a774c0" (RZ/G2E)
- "renesas,iic-r8a7790" (R-Car H2)
- "renesas,iic-r8a7791" (R-Car M2-W)
diff --git a/Documentation/i2c/busses/i2c-i801.rst b/Documentation/i2c/busses/i2c-i801.rst
index 2a570c214880..b83da0e94184 100644
--- a/Documentation/i2c/busses/i2c-i801.rst
+++ b/Documentation/i2c/busses/i2c-i801.rst
@@ -42,6 +42,7 @@ Supported adapters:
* Intel Comet Lake (PCH)
* Intel Elkhart Lake (PCH)
* Intel Tiger Lake (PCH)
+ * Intel Jasper Lake (SOC)
Datasheets: Publicly available at the Intel website
diff --git a/Documentation/i2c/instantiating-devices.rst b/Documentation/i2c/instantiating-devices.rst
index 1238f1fa3382..875ebe9e78e3 100644
--- a/Documentation/i2c/instantiating-devices.rst
+++ b/Documentation/i2c/instantiating-devices.rst
@@ -123,7 +123,7 @@ present or not (for example for an optional feature which is not present
on cheap variants of a board but you have no way to tell them apart), or
it may have different addresses from one board to the next (manufacturer
changing its design without notice). In this case, you can call
-i2c_new_probed_device() instead of i2c_new_device().
+i2c_new_scanned_device() instead of i2c_new_device().
Example (from the nxp OHCI driver)::
@@ -139,8 +139,8 @@ Example (from the nxp OHCI driver)::
i2c_adap = i2c_get_adapter(2);
memset(&i2c_info, 0, sizeof(struct i2c_board_info));
strscpy(i2c_info.type, "isp1301_nxp", sizeof(i2c_info.type));
- isp1301_i2c_client = i2c_new_probed_device(i2c_adap, &i2c_info,
- normal_i2c, NULL);
+ isp1301_i2c_client = i2c_new_scanned_device(i2c_adap, &i2c_info,
+ normal_i2c, NULL);
i2c_put_adapter(i2c_adap);
(...)
}
@@ -153,14 +153,14 @@ simply gives up.
The driver which instantiated the I2C device is responsible for destroying
it on cleanup. This is done by calling i2c_unregister_device() on the
pointer that was earlier returned by i2c_new_device() or
-i2c_new_probed_device().
+i2c_new_scanned_device().
Method 3: Probe an I2C bus for certain devices
----------------------------------------------
Sometimes you do not have enough information about an I2C device, not even
-to call i2c_new_probed_device(). The typical case is hardware monitoring
+to call i2c_new_scanned_device(). The typical case is hardware monitoring
chips on PC mainboards. There are several dozen models, which can live
at 25 different addresses. Given the huge number of mainboards out there,
it is next to impossible to build an exhaustive list of the hardware
diff --git a/Documentation/i2c/writing-clients.rst b/Documentation/i2c/writing-clients.rst
index dddf0a14ab7c..ced309b5e0cc 100644
--- a/Documentation/i2c/writing-clients.rst
+++ b/Documentation/i2c/writing-clients.rst
@@ -185,14 +185,14 @@ Sometimes you know that a device is connected to a given I2C bus, but you
don't know the exact address it uses. This happens on TV adapters for
example, where the same driver supports dozens of slightly different
models, and I2C device addresses change from one model to the next. In
-that case, you can use the i2c_new_probed_device() variant, which is
+that case, you can use the i2c_new_scanned_device() variant, which is
similar to i2c_new_device(), except that it takes an additional list of
possible I2C addresses to probe. A device is created for the first
responsive address in the list. If you expect more than one device to be
-present in the address range, simply call i2c_new_probed_device() that
+present in the address range, simply call i2c_new_scanned_device() that
many times.
-The call to i2c_new_device() or i2c_new_probed_device() typically happens
+The call to i2c_new_device() or i2c_new_scanned_device() typically happens
in the I2C bus driver. You may want to save the returned i2c_client
reference for later use.
@@ -237,7 +237,7 @@ Device Deletion
---------------
Each I2C device which has been created using i2c_new_device() or
-i2c_new_probed_device() can be unregistered by calling
+i2c_new_scanned_device() can be unregistered by calling
i2c_unregister_device(). If you don't call it explicitly, it will be
called automatically before the underlying I2C bus itself is removed, as a
device can't survive its parent in the device driver model.