Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
 "This is the main drm pull request for 4.5.  I don't think I've missed
  anything too major, I'm mostly back at work now but I'll probably get
  some sleep in 5 years time.

  Summary:

  New drivers:
   - etnaviv:

     GPU driver for the 3D core on the Vivante core used in numerous
     ARM boards.

  Highlights:

  Core:
   - Atomic suspend/resume helpers
   - Move the headers to using userspace friendlier types.
   - Documentation updates
   - Lots of struct_mutex removal.
   - Bunch of DP MST fixes from AMD.

  Panel:
   - More DSI helpers
   - Support for some new basic panels

  i915:
   - Basic Kabylake support
   - DP link training and detect code refactoring
   - fbc/psr fixes
   - FIFO underrun fixes
   - SDE interrupt handling fixes
   - dma-buf/fence support in pageflip path.
   - GPU side for MST audio support

  radeon/amdgpu:
   - Drop UMS support
   - GPUVM/Scheduler optimisations
   - Initial Powerplay support for Tonga/Fiji/CZ/ST
   - ACP audio prerequisites

  nouveau:
   - GK20a instmem improvements
   - PCIE link speed change support

  msm:
   - DSI support for msm8960/apq8064

  tegra:
   - Host1X support for Tegra210 SoC

  vc4:
   - 3D acceleration support

  armada:
   - Get rid of struct mutex

  tda998x:
   - Atomic modesetting support
   - TMDS clock limitations

  omapdrm:
   - Atomic modesetting support
   - improved TILER performance

  rockchip:
   - RK3036 VOP support
   - Atomic modesetting support
   - Synopsys DW MIPI DSI support

  exynos:
   - Runtime PM support
   - of_graph binding for DP panels
   - Cleanup of IPP code
   - Configurable plane support
   - Kernel panic fixes at release time"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (711 commits)
  drm/fb_cma_helper: Remove implicit call to disable_unused_functions
  drm/amdgpu: add missing irq.h include
  drm/vmwgfx: Fix a width / pitch mismatch on framebuffer updates
  drm/vmwgfx: Fix an incorrect lock check
  drm: nouveau: fix nouveau_debugfs_init prototype
  drm/nouveau/pci: fix check in nvkm_pcie_set_link
  drm/amdgpu: validate duplicates first
  drm/amdgpu: move VM page tables to the LRU end on CS v2
  drm/ttm: add ttm_bo_move_to_lru_tail function v2
  drm/ttm: fix adding foreign BOs to the swap LRU
  drm/ttm: fix adding foreign BOs to the LRU during init v2
  drm/radeon: use kobj_to_dev()
  drm/amdgpu: use kobj_to_dev()
  drm/amdgpu/cz: force vce clocks when sclks are forced
  drm/amdgpu/cz: force uvd clocks when sclks are forced
  drm/amdgpu/cz: add code to enable forcing VCE clocks
  drm/amdgpu/cz: add code to enable forcing UVD clocks
  drm/amdgpu: fix lost sync_to if scheduler is enabled.
  drm/amd/powerplay: fix static checker warning for return meaningless value.
  drm/sysfs: use kobj_to_dev()
  ...

15 files changed, 344 insertions, 871 deletions

diff --git a/Documentation/DocBook/gpu.tmpl b/Documentation/DocBook/gpu.tmpl
index 03f01e76add7..a8669330b456 100644
--- a/Documentation/DocBook/gpu.tmpl
+++ b/Documentation/DocBook/gpu.tmpl
@@ -124,6 +124,43 @@
     <para>
       [Insert diagram of typical DRM stack here]
     </para>
+  <sect1>
+    <title>Style Guidelines</title>
+    <para>
+      For consistency this documentation uses American English. Abbreviations
+      are written as all-uppercase, for example: DRM, KMS, IOCTL, CRTC, and so
+      on. To aid in reading, documentations make full use of the markup
+      characters kerneldoc provides: @parameter for function parameters, @member
+      for structure members, &amp;structure to reference structures and
+      function() for functions. These all get automatically hyperlinked if
+      kerneldoc for the referenced objects exists. When referencing entries in
+      function vtables please use -&gt;vfunc(). Note that kerneldoc does
+      not support referencing struct members directly, so please add a reference
+      to the vtable struct somewhere in the same paragraph or at least section.
+    </para>
+    <para>
+      Except in special situations (to separate locked from unlocked variants)
+      locking requirements for functions aren't documented in the kerneldoc.
+      Instead locking should be check at runtime using e.g.
+      <code>WARN_ON(!mutex_is_locked(...));</code>. Since it's much easier to
+      ignore documentation than runtime noise this provides more value. And on
+      top of that runtime checks do need to be updated when the locking rules
+      change, increasing the chances that they're correct. Within the
+      documentation the locking rules should be explained in the relevant
+      structures: Either in the comment for the lock explaining what it
+      protects, or data fields need a note about which lock protects them, or
+      both.
+    </para>
+    <para>
+      Functions which have a non-<code>void</code> return value should have a
+      section called "Returns" explaining the expected return values in
+      different cases and their meanings. Currently there's no consensus whether
+      that section name should be all upper-case or not, and whether it should
+      end in a colon or not. Go with the file-local style. Other common section
+      names are "Notes" with information for dangerous or tricky corner cases,
+      and "FIXME" where the interface could be cleaned up.
+    </para>
+  </sect1>
   </chapter>
 
   <!-- Internals -->
@@ -946,12 +983,10 @@ int max_width, max_height;</synopsis>
     <sect2>
       <title>Atomic Mode Setting Function Reference</title>
 !Edrivers/gpu/drm/drm_atomic.c
+!Idrivers/gpu/drm/drm_atomic.c
     </sect2>
     <sect2>
-      <title>Frame Buffer Creation</title>
-      <synopsis>struct drm_framebuffer *(*fb_create)(struct drm_device *dev,
-				     struct drm_file *file_priv,
-				     struct drm_mode_fb_cmd2 *mode_cmd);</synopsis>
+      <title>Frame Buffer Abstraction</title>
       <para>
         Frame buffers are abstract memory objects that provide a source of
         pixels to scanout to a CRTC. Applications explicitly request the
@@ -970,73 +1005,6 @@ int max_width, max_height;</synopsis>
 	and so expects TTM handles in the create ioctl and not GEM handles.
       </para>
       <para>
-        Drivers must first validate the requested frame buffer parameters passed
-        through the mode_cmd argument. In particular this is where invalid
-        sizes, pixel formats or pitches can be caught.
-      </para>
-      <para>
-        If the parameters are deemed valid, drivers then create, initialize and
-        return an instance of struct <structname>drm_framebuffer</structname>.
-        If desired the instance can be embedded in a larger driver-specific
-	structure. Drivers must fill its <structfield>width</structfield>,
-	<structfield>height</structfield>, <structfield>pitches</structfield>,
-        <structfield>offsets</structfield>, <structfield>depth</structfield>,
-        <structfield>bits_per_pixel</structfield> and
-        <structfield>pixel_format</structfield> fields from the values passed
-        through the <parameter>drm_mode_fb_cmd2</parameter> argument. They
-        should call the <function>drm_helper_mode_fill_fb_struct</function>
-        helper function to do so.
-      </para>
-
-      <para>
-	The initialization of the new framebuffer instance is finalized with a
-	call to <function>drm_framebuffer_init</function> which takes a pointer
-	to DRM frame buffer operations (struct
-	<structname>drm_framebuffer_funcs</structname>). Note that this function
-	publishes the framebuffer and so from this point on it can be accessed
-	concurrently from other threads. Hence it must be the last step in the
-	driver's framebuffer initialization sequence. Frame buffer operations
-	are
-        <itemizedlist>
-          <listitem>
-            <synopsis>int (*create_handle)(struct drm_framebuffer *fb,
-		     struct drm_file *file_priv, unsigned int *handle);</synopsis>
-            <para>
-              Create a handle to the frame buffer underlying memory object. If
-              the frame buffer uses a multi-plane format, the handle will
-              reference the memory object associated with the first plane.
-            </para>
-            <para>
-              Drivers call <function>drm_gem_handle_create</function> to create
-              the handle.
-            </para>
-          </listitem>
-          <listitem>
-            <synopsis>void (*destroy)(struct drm_framebuffer *framebuffer);</synopsis>
-            <para>
-              Destroy the frame buffer object and frees all associated
-              resources. Drivers must call
-              <function>drm_framebuffer_cleanup</function> to free resources
-              allocated by the DRM core for the frame buffer object, and must
-              make sure to unreference all memory objects associated with the
-              frame buffer. Handles created by the
-              <methodname>create_handle</methodname> operation are released by
-              the DRM core.
-            </para>
-          </listitem>
-          <listitem>
-            <synopsis>int (*dirty)(struct drm_framebuffer *framebuffer,
-	     struct drm_file *file_priv, unsigned flags, unsigned color,
-	     struct drm_clip_rect *clips, unsigned num_clips);</synopsis>
-            <para>
-              This optional operation notifies the driver that a region of the
-              frame buffer has changed in response to a DRM_IOCTL_MODE_DIRTYFB
-              ioctl call.
-            </para>
-          </listitem>
-        </itemizedlist>
-      </para>
-      <para>
 	The lifetime of a drm framebuffer is controlled with a reference count,
 	drivers can grab additional references with
 	<function>drm_framebuffer_reference</function>and drop them
@@ -1173,137 +1141,6 @@ int max_width, max_height;</synopsis>
           pointer to CRTC functions.
         </para>
       </sect3>
-      <sect3 id="drm-kms-crtcops">
-        <title>CRTC Operations</title>
-        <sect4>
-          <title>Set Configuration</title>
-          <synopsis>int (*set_config)(struct drm_mode_set *set);</synopsis>
-          <para>
-            Apply a new CRTC configuration to the device. The configuration
-            specifies a CRTC, a frame buffer to scan out from, a (x,y) position in
-            the frame buffer, a display mode and an array of connectors to drive
-            with the CRTC if possible.
-          </para>
-          <para>
-            If the frame buffer specified in the configuration is NULL, the driver
-            must detach all encoders connected to the CRTC and all connectors
-            attached to those encoders and disable them.
-          </para>
-          <para>
-            This operation is called with the mode config lock held.
-          </para>
-          <note><para>
-	    Note that the drm core has no notion of restoring the mode setting
-	    state after resume, since all resume handling is in the full
-	    responsibility of the driver. The common mode setting helper library
-	    though provides a helper which can be used for this:
-	    <function>drm_helper_resume_force_mode</function>.
-          </para></note>
-        </sect4>
-        <sect4>
-          <title>Page Flipping</title>
-          <synopsis>int (*page_flip)(struct drm_crtc *crtc, struct drm_framebuffer *fb,
-                   struct drm_pending_vblank_event *event);</synopsis>
-          <para>
-            Schedule a page flip to the given frame buffer for the CRTC. This
-            operation is called with the mode config mutex held.
-          </para>
-          <para>
-            Page flipping is a synchronization mechanism that replaces the frame
-            buffer being scanned out by the CRTC with a new frame buffer during
-            vertical blanking, avoiding tearing. When an application requests a page
-            flip the DRM core verifies that the new frame buffer is large enough to
-            be scanned out by  the CRTC in the currently configured mode and then
-            calls the CRTC <methodname>page_flip</methodname> operation with a
-            pointer to the new frame buffer.
-          </para>
-          <para>
-            The <methodname>page_flip</methodname> operation schedules a page flip.
-            Once any pending rendering targeting the new frame buffer has
-            completed, the CRTC will be reprogrammed to display that frame buffer
-            after the next vertical refresh. The operation must return immediately
-            without waiting for rendering or page flip to complete and must block
-            any new rendering to the frame buffer until the page flip completes.
-          </para>
-          <para>
-            If a page flip can be successfully scheduled the driver must set the
-            <code>drm_crtc-&gt;fb</code> field to the new framebuffer pointed to
-            by <code>fb</code>. This is important so that the reference counting
-            on framebuffers stays balanced.
-          </para>
-          <para>
-            If a page flip is already pending, the
-            <methodname>page_flip</methodname> operation must return
-            -<errorname>EBUSY</errorname>.
-          </para>
-          <para>
-            To synchronize page flip to vertical blanking the driver will likely
-            need to enable vertical blanking interrupts. It should call
-            <function>drm_vblank_get</function> for that purpose, and call
-            <function>drm_vblank_put</function> after the page flip completes.
-          </para>
-          <para>
-            If the application has requested to be notified when page flip completes
-            the <methodname>page_flip</methodname> operation will be called with a
-            non-NULL <parameter>event</parameter> argument pointing to a
-            <structname>drm_pending_vblank_event</structname> instance. Upon page
-            flip completion the driver must call <methodname>drm_send_vblank_event</methodname>
-            to fill in the event and send to wake up any waiting processes.
-            This can be performed with
-            <programlisting><![CDATA[
-            spin_lock_irqsave(&dev->event_lock, flags);
-            ...
-            drm_send_vblank_event(dev, pipe, event);
-            spin_unlock_irqrestore(&dev->event_lock, flags);
-            ]]></programlisting>
-          </para>
-          <note><para>
-            FIXME: Could drivers that don't need to wait for rendering to complete
-            just add the event to <literal>dev-&gt;vblank_event_list</literal> and
-            let the DRM core handle everything, as for "normal" vertical blanking
-            events?
-          </para></note>
-          <para>
-            While waiting for the page flip to complete, the
-            <literal>event-&gt;base.link</literal> list head can be used freely by
-            the driver to store the pending event in a driver-specific list.
-          </para>
-          <para>
-            If the file handle is closed before the event is signaled, drivers must
-            take care to destroy the event in their
-            <methodname>preclose</methodname> operation (and, if needed, call
-            <function>drm_vblank_put</function>).
-          </para>
-        </sect4>
-        <sect4>
-          <title>Miscellaneous</title>
-          <itemizedlist>
-            <listitem>
-              <synopsis>void (*set_property)(struct drm_crtc *crtc,
-                     struct drm_property *property, uint64_t value);</synopsis>
-              <para>
-                Set the value of the given CRTC property to
-                <parameter>value</parameter>. See <xref linkend="drm-kms-properties"/>
-                for more information about properties.
-              </para>
-            </listitem>
-            <listitem>
-              <synopsis>void (*gamma_set)(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b,
-                        uint32_t start, uint32_t size);</synopsis>
-              <para>
-                Apply a gamma table to the device. The operation is optional.
-              </para>
-            </listitem>
-            <listitem>
-              <synopsis>void (*destroy)(struct drm_crtc *crtc);</synopsis>
-              <para>
-                Destroy the CRTC when not needed anymore. See
-                <xref linkend="drm-kms-init"/>.
-              </para>
-            </listitem>
-          </itemizedlist>
-        </sect4>
-      </sect3>
     </sect2>
     <sect2>
       <title>Planes (struct <structname>drm_plane</structname>)</title>
@@ -1320,7 +1157,7 @@ int max_width, max_height;</synopsis>
         <listitem>
         DRM_PLANE_TYPE_PRIMARY represents a "main" plane for a CRTC.  Primary
         planes are the planes operated upon by CRTC modesetting and flipping
-        operations described in <xref linkend="drm-kms-crtcops"/>.
+	operations described in the page_flip hook in <structname>drm_crtc_funcs</structname>.
         </listitem>
         <listitem>
         DRM_PLANE_TYPE_CURSOR represents a "cursor" plane for a CRTC.  Cursor
@@ -1357,52 +1194,6 @@ int max_width, max_height;</synopsis>
           primary plane with standard capabilities.
         </para>
       </sect3>
-      <sect3>
-        <title>Plane Operations</title>
-        <itemizedlist>
-          <listitem>
-            <synopsis>int (*update_plane)(struct drm_plane *plane, struct drm_crtc *crtc,
-                        struct drm_framebuffer *fb, int crtc_x, int crtc_y,
-                        unsigned int crtc_w, unsigned int crtc_h,
-                        uint32_t src_x, uint32_t src_y,
-                        uint32_t src_w, uint32_t src_h);</synopsis>
-            <para>
-              Enable and configure the plane to use the given CRTC and frame buffer.
-            </para>
-            <para>
-              The source rectangle in frame buffer memory coordinates is given by
-              the <parameter>src_x</parameter>, <parameter>src_y</parameter>,
-              <parameter>src_w</parameter> and <parameter>src_h</parameter>
-              parameters (as 16.16 fixed point values). Devices that don't support
-              subpixel plane coordinates can ignore the fractional part.
-            </para>
-            <para>
-              The destination rectangle in CRTC coordinates is given by the
-              <parameter>crtc_x</parameter>, <parameter>crtc_y</parameter>,
-              <parameter>crtc_w</parameter> and <parameter>crtc_h</parameter>
-              parameters (as integer values). Devices scale the source rectangle to
-              the destination rectangle. If scaling is not supported, and the source
-              rectangle size doesn't match the destination rectangle size, the
-              driver must return a -<errorname>EINVAL</errorname> error.
-            </para>
-          </listitem>
-          <listitem>
-            <synopsis>int (*disable_plane)(struct drm_plane *plane);</synopsis>
-            <para>
-              Disable the plane. The DRM core calls this method in response to a
-              DRM_IOCTL_MODE_SETPLANE ioctl call with the frame buffer ID set to 0.
-              Disabled planes must not be processed by the CRTC.
-            </para>
-          </listitem>
-          <listitem>
-            <synopsis>void (*destroy)(struct drm_plane *plane);</synopsis>
-            <para>
-              Destroy the plane when not needed anymore. See
-              <xref linkend="drm-kms-init"/>.
-            </para>
-          </listitem>
-        </itemizedlist>
-      </sect3>
     </sect2>
     <sect2>
       <title>Encoders (struct <structname>drm_encoder</structname>)</title>
@@ -1459,27 +1250,6 @@ int max_width, max_height;</synopsis>
           encoders they want to use to a CRTC.
         </para>
       </sect3>
-      <sect3>
-        <title>Encoder Operations</title>
-        <itemizedlist>
-          <listitem>
-            <synopsis>void (*destroy)(struct drm_encoder *encoder);</synopsis>
-            <para>
-              Called to destroy the encoder when not needed anymore. See
-              <xref linkend="drm-kms-init"/>.
-            </para>
-          </listitem>
-          <listitem>
-            <synopsis>void (*set_property)(struct drm_plane *plane,
-                     struct drm_property *property, uint64_t value);</synopsis>
-            <para>
-              Set the value of the given plane property to
-              <parameter>value</parameter>. See <xref linkend="drm-kms-properties"/>
-              for more information about properties.
-            </para>
-          </listitem>
-        </itemizedlist>
-      </sect3>
     </sect2>
     <sect2>
       <title>Connectors (struct <structname>drm_connector</structname>)</title>
@@ -1683,27 +1453,6 @@ int max_width, max_height;</synopsis>
             connector_status_unknown.
           </para>
         </sect4>
-        <sect4>
-          <title>Miscellaneous</title>
-          <itemizedlist>
-            <listitem>
-              <synopsis>void (*set_property)(struct drm_connector *connector,
-                     struct drm_property *property, uint64_t value);</synopsis>
-              <para>
-                Set the value of the given connector property to
-                <parameter>value</parameter>. See <xref linkend="drm-kms-properties"/>
-                for more information about properties.
-              </para>
-            </listitem>
-            <listitem>
-              <synopsis>void (*destroy)(struct drm_connector *connector);</synopsis>
-              <para>
-                Destroy the connector when not needed anymore. See
-                <xref linkend="drm-kms-init"/>.
-              </para>
-            </listitem>
-          </itemizedlist>
-        </sect4>
       </sect3>
     </sect2>
     <sect2>
@@ -1830,462 +1579,6 @@ void intel_crt_init(struct drm_device *dev)
       entities.
     </para>
     <sect2>
-      <title>Helper Functions</title>
-      <itemizedlist>
-        <listitem>
-          <synopsis>int drm_crtc_helper_set_config(struct drm_mode_set *set);</synopsis>
-          <para>
-            The <function>drm_crtc_helper_set_config</function> helper function
-            is a CRTC <methodname>set_config</methodname> implementation. It
-            first tries to locate the best encoder for each connector by calling
-            the connector <methodname>best_encoder</methodname> helper
-            operation.
-          </para>
-          <para>
-            After locating the appropriate encoders, the helper function will
-            call the <methodname>mode_fixup</methodname> encoder and CRTC helper
-            operations to adjust the requested mode, or reject it completely in
-            which case an error will be returned to the application. If the new
-            configuration after mode adjustment is identical to the current
-            configuration the helper function will return without performing any
-            other operation.
-          </para>
-          <para>
-            If the adjusted mode is identical to the current mode but changes to
-            the frame buffer need to be applied, the
-            <function>drm_crtc_helper_set_config</function> function will call
-            the CRTC <methodname>mode_set_base</methodname> helper operation. If
-            the adjusted mode differs from the current mode, or if the
-            <methodname>mode_set_base</methodname> helper operation is not
-            provided, the helper function performs a full mode set sequence by
-            calling the <methodname>prepare</methodname>,
-            <methodname>mode_set</methodname> and
-            <methodname>commit</methodname> CRTC and encoder helper operations,
-            in that order.
-          </para>
-        </listitem>
-        <listitem>
-          <synopsis>void drm_helper_connector_dpms(struct drm_connector *connector, int mode);</synopsis>
-          <para>
-            The <function>drm_helper_connector_dpms</function> helper function
-            is a connector <methodname>dpms</methodname> implementation that
-            tracks power state of connectors. To use the function, drivers must
-            provide <methodname>dpms</methodname> helper operations for CRTCs
-            and encoders to apply the DPMS state to the device.
-          </para>
-          <para>
-            The mid-layer doesn't track the power state of CRTCs and encoders.
-            The <methodname>dpms</methodname> helper operations can thus be
-            called with a mode identical to the currently active mode.
-          </para>
-        </listitem>
-        <listitem>
-          <synopsis>int drm_helper_probe_single_connector_modes(struct drm_connector *connector,
-                                            uint32_t maxX, uint32_t maxY);</synopsis>
-          <para>
-            The <function>drm_helper_probe_single_connector_modes</function> helper
-            function is a connector <methodname>fill_modes</methodname>
-            implementation that updates the connection status for the connector
-            and then retrieves a list of modes by calling the connector
-            <methodname>get_modes</methodname> helper operation.
-          </para>
-         <para>
-            If the helper operation returns no mode, and if the connector status
-            is connector_status_connected, standard VESA DMT modes up to
-            1024x768 are automatically added to the modes list by a call to
-            <function>drm_add_modes_noedid</function>.
-          </para>
-          <para>
-            The function then filters out modes larger than
-            <parameter>max_width</parameter> and <parameter>max_height</parameter>
-            if specified. It finally calls the optional connector
-            <methodname>mode_valid</methodname> helper operation for each mode in
-            the probed list to check whether the mode is valid for the connector.
-          </para>
-        </listitem>
-      </itemizedlist>
-    </sect2>
-    <sect2>
-      <title>CRTC Helper Operations</title>
-      <itemizedlist>
-        <listitem id="drm-helper-crtc-mode-fixup">
-          <synopsis>bool (*mode_fixup)(struct drm_crtc *crtc,
-                       const struct drm_display_mode *mode,
-                       struct drm_display_mode *adjusted_mode);</synopsis>
-          <para>
-            Let CRTCs adjust the requested mode or reject it completely. This
-            operation returns true if the mode is accepted (possibly after being
-            adjusted) or false if it is rejected.
-          </para>
-          <para>
-            The <methodname>mode_fixup</methodname> operation should reject the
-            mode if it can't reasonably use it. The definition of "reasonable"
-            is currently fuzzy in this context. One possible behaviour would be
-            to set the adjusted mode to the panel timings when a fixed-mode
-            panel is used with hardware capable of scaling. Another behaviour
-            would be to accept any input mode and adjust it to the closest mode
-            supported by the hardware (FIXME: This needs to be clarified).
-          </para>
-        </listitem>
-        <listitem>
-          <synopsis>int (*mode_set_base)(struct drm_crtc *crtc, int x, int y,
-                     struct drm_framebuffer *old_fb)</synopsis>
-          <para>
-            Move the CRTC on the current frame buffer (stored in
-            <literal>crtc-&gt;fb</literal>) to position (x,y). Any of the frame
-            buffer, x position or y position may have been modified.
-          </para>
-          <para>
-            This helper operation is optional. If not provided, the
-            <function>drm_crtc_helper_set_config</function> function will fall
-            back to the <methodname>mode_set</methodname> helper operation.
-          </para>
-          <note><para>
-            FIXME: Why are x and y passed as arguments, as they can be accessed
-            through <literal>crtc-&gt;x</literal> and
-            <literal>crtc-&gt;y</literal>?
-          </para></note>
-        </listitem>
-        <listitem>
-          <synopsis>void (*prepare)(struct drm_crtc *crtc);</synopsis>
-          <para>
-            Prepare the CRTC for mode setting. This operation is called after
-            validating the requested mode. Drivers use it to perform
-            device-specific operations required before setting the new mode.
-          </para>
-        </listitem>
-        <listitem>
-          <synopsis>int (*mode_set)(struct drm_crtc *crtc, struct drm_display_mode *mode,
-                struct drm_display_mode *adjusted_mode, int x, int y,
-                struct drm_framebuffer *old_fb);</synopsis>
-          <para>
-            Set a new mode, position and frame buffer. Depending on the device
-            requirements, the mode can be stored internally by the driver and
-            applied in the <methodname>commit</methodname> operation, or
-            programmed to the hardware immediately.
-          </para>
-          <para>
-            The <methodname>mode_set</methodname> operation returns 0 on success
-	    or a negative error code if an error occurs.
-          </para>
-        </listitem>
-        <listitem>
-          <synopsis>void (*commit)(struct drm_crtc *crtc);</synopsis>
-          <para>
-            Commit a mode. This operation is called after setting the new mode.
-            Upon return the device must use the new mode and be fully
-            operational.
-          </para>
-        </listitem>
-      </itemizedlist>
-    </sect2>
-    <sect2>
-      <title>Encoder Helper Operations</title>
-      <itemizedlist>
-        <listitem>
-          <synopsis>bool (*mode_fixup)(struct drm_encoder *encoder,
-                       const struct drm_display_mode *mode,
-                       struct drm_display_mode *adjusted_mode);</synopsis>
-          <para>
-            Let encoders adjust the requested mode or reject it completely. This
-            operation returns true if the mode is accepted (possibly after being
-            adjusted) or false if it is rejected. See the
-            <link linkend="drm-helper-crtc-mode-fixup">mode_fixup CRTC helper
-            operation</link> for an explanation of the allowed adjustments.
-          </para>
-        </listitem>
-        <listitem>
-          <synopsis>void (*prepare)(struct drm_encoder *encoder);</synopsis>
-          <para>
-            Prepare the encoder for mode setting. This operation is called after
-            validating the requested mode. Drivers use it to perform
-            device-specific operations required before setting the new mode.
-          </para>
-        </listitem>
-        <listitem>
-          <synopsis>void (*mode_set)(struct drm_encoder *encoder,
-                 struct drm_display_mode *mode,
-                 struct drm_display_mode *adjusted_mode);</synopsis>
-          <para>
-            Set a new mode. Depending on the device requirements, the mode can
-            be stored internally by the driver and applied in the
-            <methodname>commit</methodname> operation, or programmed to the
-            hardware immediately.
-          </para>
-        </listitem>
-        <listitem>
-          <synopsis>void (*commit)(struct drm_encoder *encoder);</synopsis>
-          <para>
-            Commit a mode. This operation is called after setting the new mode.
-            Upon return the device must use the new mode and be fully
-            operational.
-          </para>
-        </listitem>
-      </itemizedlist>
-    </sect2>
-    <sect2>
-      <title>Connector Helper Operations</title>
-      <itemizedlist>
-        <listitem>
-          <synopsis>struct drm_encoder *(*best_encoder)(struct drm_connector *connector);</synopsis>
-          <para>
-            Return a pointer to the best encoder for the connecter. Device that
-            map connectors to encoders 1:1 simply return the pointer to the
-            associated encoder. This operation is mandatory.
-          </para>
-        </listitem>
-        <listitem>
-          <synopsis>int (*get_modes)(struct drm_connector *connector);</synopsis>
-          <para>
-            Fill the connector's <structfield>probed_modes</structfield> list
-            by parsing EDID data with <function>drm_add_edid_modes</function>,
-            adding standard VESA DMT modes with <function>drm_add_modes_noedid</function>,
-            or calling <function>drm_mode_probed_add</function> directly for every
-            supported mode and return the number of modes it has detected. This
-            operation is mandatory.
-          </para>
-          <para>
-            Note that the caller function will automatically add standard VESA
-            DMT modes up to 1024x768 if the <methodname>get_modes</methodname>
-            helper operation returns no mode and if the connector status is
-            connector_status_connected. There is no need to call
-            <function>drm_add_edid_modes</function> manually in that case.
-          </para>
-          <para>
-            When adding modes manually the driver creates each mode with a call to
-            <function>drm_mode_create</function> and must fill the following fields.
-            <itemizedlist>
-              <listitem>
-                <synopsis>__u32 type;</synopsis>
-                <para>
-                  Mode type bitmask, a combination of
-                  <variablelist>
-                    <varlistentry>
-                      <term>DRM_MODE_TYPE_BUILTIN</term>
-                      <listitem><para>not used?</para></listitem>
-                    </varlistentry>
-                    <varlistentry>
-                      <term>DRM_MODE_TYPE_CLOCK_C</term>
-                      <listitem><para>not used?</para></listitem>
-                    </varlistentry>
-                    <varlistentry>
-                      <term>DRM_MODE_TYPE_CRTC_C</term>
-                      <listitem><para>not used?</para></listitem>
-                    </varlistentry>
-                    <varlistentry>
-                      <term>
-        DRM_MODE_TYPE_PREFERRED - The preferred mode for the connector
-                      </term>
-                      <listitem>
-                        <para>not used?</para>
-                      </listitem>
-                    </varlistentry>
-                    <varlistentry>
-                      <term>DRM_MODE_TYPE_DEFAULT</term>
-                      <listitem><para>not used?</para></listitem>
-                    </varlistentry>
-                    <varlistentry>
-                      <term>DRM_MODE_TYPE_USERDEF</term>
-                      <listitem><para>not used?</para></listitem>
-                    </varlistentry>
-                    <varlistentry>
-                      <term>DRM_MODE_TYPE_DRIVER</term>
-                      <listitem>
-                        <para>
-                          The mode has been created by the driver (as opposed to
-                          to user-created modes).
-                        </para>
-                      </listitem>
-                    </varlistentry>
-                  </variablelist>
-                  Drivers must set the DRM_MODE_TYPE_DRIVER bit for all modes they
-                  create, and set the DRM_MODE_TYPE_PREFERRED bit for the preferred
-                  mode.
-                </para>
-              </listitem>
-              <listitem>
-                <synopsis>__u32 clock;</synopsis>
-                <para>Pixel clock frequency in kHz unit</para>
-              </listitem>
-              <listitem>
-                <synopsis>__u16 hdisplay, hsync_start, hsync_end, htotal;
-    __u16 vdisplay, vsync_start, vsync_end, vtotal;</synopsis>
-                <para>Horizontal and vertical timing information</para>
-                <screen><![CDATA[
-             Active                 Front           Sync           Back
-             Region                 Porch                          Porch
-    <-----------------------><----------------><-------------><-------------->
-
-      //////////////////////|
-     ////////////////////// |
-    //////////////////////  |..................               ................
-                                               _______________
-
-    <----- [hv]display ----->
-    <------------- [hv]sync_start ------------>
-    <--------------------- [hv]sync_end --------------------->
-    <-------------------------------- [hv]total ----------------------------->
-]]></screen>
-              </listitem>
-              <listitem>
-                <synopsis>__u16 hskew;
-    __u16 vscan;</synopsis>
-                <para>Unknown</para>
-              </listitem>
-              <listitem>
-                <synopsis>__u32 flags;</synopsis>
-                <para>
-                  Mode flags, a combination of
-                  <variablelist>
-                    <varlistentry>
-                      <term>DRM_MODE_FLAG_PHSYNC</term>
-                      <listitem><para>
-                        Horizontal sync is active high
-                      </para></listitem>
-                    </varlistentry>
-                    <varlistentry>
-                      <term>DRM_MODE_FLAG_NHSYNC</term>
-                      <listitem><para>
-                        Horizontal sync is active low
-                      </para></listitem>
-                    </varlistentry>
-                    <varlistentry>
-                      <term>DRM_MODE_FLAG_PVSYNC</term>
-                      <listitem><para>
-                        Vertical sync is active high
-                      </para></listitem>
-                    </varlistentry>
-                    <varlistentry>
-                      <term>DRM_MODE_FLAG_NVSYNC</term>
-                      <listitem><para>
-                        Vertical sync is active low
-                      </para></listitem>
-                    </varlistentry>
-                    <varlistentry>
-                      <term>DRM_MODE_FLAG_INTERLACE</term>
-                      <listitem><para>
-                        Mode is interlaced
-                      </para></listitem>
-                    </varlistentry>
-                    <varlistentry>
-                      <term>DRM_MODE_FLAG_DBLSCAN</term>
-                      <listitem><para>
-                        Mode uses doublescan
-                      </para></listitem>
-                    </varlistentry>
-                    <varlistentry>
-                      <term>DRM_MODE_FLAG_CSYNC</term>
-                      <listitem><para>
-                        Mode uses composite sync
-                      </para></listitem>
-                    </varlistentry>
-                    <varlistentry>
-                      <term>DRM_MODE_FLAG_PCSYNC</term>
-                      <listitem><para>
-                        Composite sync is active high
-                      </para></listitem>
-                    </varlistentry>
-                    <varlistentry>
-                      <term>DRM_MODE_FLAG_NCSYNC</term>
-                      <listitem><para>
-                        Composite sync is active low
-                      </para></listitem>
-                    </varlistentry>
-                    <varlistentry>
-                      <term>DRM_MODE_FLAG_HSKEW</term>
-                      <listitem><para>
-                        hskew provided (not used?)
-                      </para></listitem>
-                    </varlistentry>
-                    <varlistentry>
-                      <term>DRM_MODE_FLAG_BCAST</term>
-                      <listitem><para>
-                        not used?
-                      </para></listitem>
-                    </varlistentry>
-                    <varlistentry>
-                      <term>DRM_MODE_FLAG_PIXMUX</term>
-                      <listitem><para>
-                        not used?
-                      </para></listitem>
-                    </varlistentry>
-                    <varlistentry>
-                      <term>DRM_MODE_FLAG_DBLCLK</term>
-                      <listitem><para>
-                        not used?
-                      </para></listitem>
-                    </varlistentry>
-                    <varlistentry>
-                      <term>DRM_MODE_FLAG_CLKDIV2</term>
-                      <listitem><para>
-                        ?
-                      </para></listitem>
-                    </varlistentry>
-                  </variablelist>
-                </para>
-                <para>
-                  Note that modes marked with the INTERLACE or DBLSCAN flags will be
-                  filtered out by
-                  <function>drm_helper_probe_single_connector_modes</function> if
-                  the connector's <structfield>interlace_allowed</structfield> or
-                  <structfield>doublescan_allowed</structfield> field is set to 0.
-                </para>
-              </listitem>
-              <listitem>
-                <synopsis>char name[DRM_DISPLAY_MODE_LEN];</synopsis>
-                <para>
-                  Mode name. The driver must call
-                  <function>drm_mode_set_name</function> to fill the mode name from
-                  <structfield>hdisplay</structfield>,
-                  <structfield>vdisplay</structfield> and interlace flag after
-                  filling the corresponding fields.
-                </para>
-              </listitem>
-            </itemizedlist>
-          </para>
-          <para>
-            The <structfield>vrefresh</structfield> value is computed by
-            <function>drm_helper_probe_single_connector_modes</function>.
-          </para>
-          <para>
-            When parsing EDID data, <function>drm_add_edid_modes</function> fills the
-            connector <structfield>display_info</structfield>
-            <structfield>width_mm</structfield> and
-            <structfield>height_mm</structfield> fields. When creating modes
-            manually the <methodname>get_modes</methodname> helper operation must
-            set the <structfield>display_info</structfield>
-            <structfield>width_mm</structfield> and
-            <structfield>height_mm</structfield> fields if they haven't been set
-            already (for instance at initialization time when a fixed-size panel is
-            attached to the connector). The mode <structfield>width_mm</structfield>
-            and <structfield>height_mm</structfield> fields are only used internally
-            during EDID parsing and should not be set when creating modes manually.
-          </para>
-        </listitem>
-        <listitem>
-          <synopsis>int (*mode_valid)(struct drm_connector *connector,
-		  struct drm_display_mode *mode);</synopsis>
-          <para>
-            Verify whether a mode is valid for the connector. Return MODE_OK for
-            supported modes and one of the enum drm_mode_status values (MODE_*)
-            for unsupported modes. This operation is optional.
-          </para>
-          <para>
-            As the mode rejection reason is currently not used beside for
-            immediately removing the unsupported mode, an implementation can
-            return MODE_BAD regardless of the exact reason why the mode is not
-            valid.
-          </para>
-          <note><para>
-            Note that the <methodname>mode_valid</methodname> helper operation is
-            only called for modes detected by the device, and
-            <emphasis>not</emphasis> for modes set by the user through the CRTC
-            <methodname>set_config</methodname> operation.
-          </para></note>
-        </listitem>
-      </itemizedlist>
-    </sect2>
-    <sect2>
       <title>Atomic Modeset Helper Functions Reference</title>
       <sect3>
 	<title>Overview</title>
@@ -2303,8 +1596,12 @@ void intel_crt_init(struct drm_device *dev)
 !Edrivers/gpu/drm/drm_atomic_helper.c
     </sect2>
     <sect2>
-      <title>Modeset Helper Functions Reference</title>
-!Iinclude/drm/drm_crtc_helper.h
+      <title>Modeset Helper Reference for Common Vtables</title>
+!Iinclude/drm/drm_modeset_helper_vtables.h
+!Pinclude/drm/drm_modeset_helper_vtables.h overview
+    </sect2>
+    <sect2>
+      <title>Legacy CRTC/Modeset Helper Functions Reference</title>
 !Edrivers/gpu/drm/drm_crtc_helper.c
 !Pdrivers/gpu/drm/drm_crtc_helper.c overview
     </sect2>
@@ -4015,92 +3312,6 @@ int num_ioctls;</synopsis>
       <sect2>
         <title>DPIO</title>
 !Pdrivers/gpu/drm/i915/i915_reg.h DPIO
-	<table id="dpiox2">
-	  <title>Dual channel PHY (VLV/CHV/BXT)</title>
-	  <tgroup cols="8">
-	    <colspec colname="c0" />
-	    <colspec colname="c1" />
-	    <colspec colname="c2" />
-	    <colspec colname="c3" />
-	    <colspec colname="c4" />
-	    <colspec colname="c5" />
-	    <colspec colname="c6" />
-	    <colspec colname="c7" />
-	    <spanspec spanname="ch0" namest="c0" nameend="c3" />
-	    <spanspec spanname="ch1" namest="c4" nameend="c7" />
-	    <spanspec spanname="ch0pcs01" namest="c0" nameend="c1" />
-	    <spanspec spanname="ch0pcs23" namest="c2" nameend="c3" />
-	    <spanspec spanname="ch1pcs01" namest="c4" nameend="c5" />
-	    <spanspec spanname="ch1pcs23" namest="c6" nameend="c7" />
-	    <thead>
-	      <row>
-		<entry spanname="ch0">CH0</entry>
-		<entry spanname="ch1">CH1</entry>
-	      </row>
-	    </thead>
-	    <tbody valign="top" align="center">
-	      <row>
-		<entry spanname="ch0">CMN/PLL/REF</entry>
-		<entry spanname="ch1">CMN/PLL/REF</entry>
-	      </row>
-	      <row>
-		<entry spanname="ch0pcs01">PCS01</entry>
-		<entry spanname="ch0pcs23">PCS23</entry>
-		<entry spanname="ch1pcs01">PCS01</entry>
-		<entry spanname="ch1pcs23">PCS23</entry>
-	      </row>
-	      <row>
-		<entry>TX0</entry>
-		<entry>TX1</entry>
-		<entry>TX2</entry>
-		<entry>TX3</entry>
-		<entry>TX0</entry>
-		<entry>TX1</entry>
-		<entry>TX2</entry>
-		<entry>TX3</entry>
-	      </row>
-	      <row>
-		<entry spanname="ch0">DDI0</entry>
-		<entry spanname="ch1">DDI1</entry>
-	      </row>
-	    </tbody>
-	  </tgroup>
-	</table>
-	<table id="dpiox1">
-	  <title>Single channel PHY (CHV/BXT)</title>
-	  <tgroup cols="4">
-	    <colspec colname="c0" />
-	    <colspec colname="c1" />
-	    <colspec colname="c2" />
-	    <colspec colname="c3" />
-	    <spanspec spanname="ch0" namest="c0" nameend="c3" />
-	    <spanspec spanname="ch0pcs01" namest="c0" nameend="c1" />
-	    <spanspec spanname="ch0pcs23" namest="c2" nameend="c3" />
-	    <thead>
-	      <row>
-		<entry spanname="ch0">CH0</entry>
-	      </row>
-	    </thead>
-	    <tbody valign="top" align="center">
-	      <row>
-		<entry spanname="ch0">CMN/PLL/REF</entry>
-	      </row>
-	      <row>
-		<entry spanname="ch0pcs01">PCS01</entry>
-		<entry spanname="ch0pcs23">PCS23</entry>
-	      </row>
-	      <row>
-		<entry>TX0</entry>
-		<entry>TX1</entry>
-		<entry>TX2</entry>
-		<entry>TX3</entry>
-	      </row>
-	      <row>
-		<entry spanname="ch0">DDI2</entry>
-	      </row>
-	    </tbody>
-	  </tgroup>
-	</table>
       </sect2>
 
       <sect2>
@@ -4226,41 +3437,63 @@ int num_ioctls;</synopsis>
 
   <chapter id="modes_of_use">
     <title>Modes of Use</title>
-  <sect1>
-    <title>Manual switching and manual power control</title>
+    <sect1>
+      <title>Manual switching and manual power control</title>
 !Pdrivers/gpu/vga/vga_switcheroo.c Manual switching and manual power control
-  </sect1>
-  <sect1>
-    <title>Driver power control</title>
+    </sect1>
+    <sect1>
+      <title>Driver power control</title>
 !Pdrivers/gpu/vga/vga_switcheroo.c Driver power control
-  </sect1>
+    </sect1>
   </chapter>
 
-  <chapter id="pubfunctions">
-    <title>Public functions</title>
+  <chapter id="api">
+    <title>API</title>
+    <sect1>
+      <title>Public functions</title>
 !Edrivers/gpu/vga/vga_switcheroo.c
-  </chapter>
-
-  <chapter id="pubstructures">
-    <title>Public structures</title>
+    </sect1>
+    <sect1>
+      <title>Public structures</title>
 !Finclude/linux/vga_switcheroo.h vga_switcheroo_handler
 !Finclude/linux/vga_switcheroo.h vga_switcheroo_client_ops
-  </chapter>
-
-  <chapter id="pubconstants">
-    <title>Public constants</title>
+    </sect1>
+    <sect1>
+      <title>Public constants</title>
 !Finclude/linux/vga_switcheroo.h vga_switcheroo_client_id
 !Finclude/linux/vga_switcheroo.h vga_switcheroo_state
-  </chapter>
-
-  <chapter id="privstructures">
-    <title>Private structures</title>
+    </sect1>
+    <sect1>
+      <title>Private structures</title>
 !Fdrivers/gpu/vga/vga_switcheroo.c vgasr_priv
 !Fdrivers/gpu/vga/vga_switcheroo.c vga_switcheroo_client
+    </sect1>
+  </chapter>
+
+  <chapter id="handlers">
+    <title>Handlers</title>
+    <sect1>
+      <title>apple-gmux Handler</title>
+!Pdrivers/platform/x86/apple-gmux.c Overview
+!Pdrivers/platform/x86/apple-gmux.c Interrupt
+      <sect2>
+        <title>Graphics mux</title>
+!Pdrivers/platform/x86/apple-gmux.c Graphics mux
+      </sect2>
+      <sect2>
+        <title>Power control</title>
+!Pdrivers/platform/x86/apple-gmux.c Power control
+      </sect2>
+      <sect2>
+        <title>Backlight control</title>
+!Pdrivers/platform/x86/apple-gmux.c Backlight control
+      </sect2>
+    </sect1>
   </chapter>
 
 !Cdrivers/gpu/vga/vga_switcheroo.c
 !Cinclude/linux/vga_switcheroo.h
+!Cdrivers/platform/x86/apple-gmux.c
 </part>
 
 </book>
diff --git a/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt b/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt
new file mode 100644
index 000000000000..ed5e0a7894ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt
@@ -0,0 +1,54 @@
+Etnaviv DRM master device
+=========================
+
+The Etnaviv DRM master device is a virtual device needed to list all
+Vivante GPU cores that comprise the GPU subsystem.
+
+Required properties:
+- compatible: Should be one of
+    "fsl,imx-gpu-subsystem"
+    "marvell,dove-gpu-subsystem"
+- cores: Should contain a list of phandles pointing to Vivante GPU devices
+
+example:
+
+gpu-subsystem {
+	compatible = "fsl,imx-gpu-subsystem";
+	cores = <&gpu_2d>, <&gpu_3d>;
+};
+
+
+Vivante GPU core devices
+========================
+
+Required properties:
+- compatible: Should be "vivante,gc"
+  A more specific compatible is not needed, as the cores contain chip
+  identification registers at fixed locations, which provide all the
+  necessary information to the driver.
+- reg: should be register base and length as documented in the
+  datasheet
+- interrupts: Should contain the cores interrupt line
+- clocks: should contain one clock for entry in clock-names
+  see Documentation/devicetree/bindings/clock/clock-bindings.txt
+- clock-names:
+   - "bus":    AXI/register clock
+   - "core":   GPU core clock
+   - "shader": Shader clock (only required if GPU has feature PIPE_3D)
+
+Optional properties:
+- power-domains: a power domain consumer specifier according to
+  Documentation/devicetree/bindings/power/power_domain.txt
+
+example:
+
+gpu_3d: gpu@00130000 {
+	compatible = "vivante,gc";
+	reg = <0x00130000 0x4000>;
+	interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&clks IMX6QDL_CLK_GPU3D_AXI>,
+	         <&clks IMX6QDL_CLK_GPU3D_CORE>,
+	         <&clks IMX6QDL_CLK_GPU3D_SHADER>;
+	clock-names = "bus", "core", "shader";
+	power-domains = <&gpc 1>;
+};
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
index 64693f2ebc51..fe4a7a2dea9c 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos_dp.txt
@@ -1,3 +1,20 @@
+Device-Tree bindings for Samsung Exynos Embedded DisplayPort Transmitter(eDP)
+
+DisplayPort is industry standard to accommodate the growing board adoption
+of digital display technology within the PC and CE industries.
+It consolidates the internal and external connection methods to reduce device
+complexity and cost. It also supports necessary features for important cross
+industry applications and provides performance scalability to enable the next
+generation of displays that feature higher color depths, refresh rates, and
+display resolutions.
+
+eDP (embedded display port) device is compliant with Embedded DisplayPort
+standard as follows,
+- DisplayPort standard 1.1a for Exynos5250 and Exynos5260.
+- DisplayPort standard 1.3 for Exynos5422s and Exynos5800.
+
+eDP resides between FIMD and panel or FIMD and bridge such as LVDS.
+
 The Exynos display port interface should be configured based on
 the type of panel connected to it.
 
@@ -66,8 +83,15 @@ Optional properties for dp-controller:
 		Hotplug detect GPIO.
 			Indicates which GPIO should be used for hotplug
 			detection
-	-video interfaces: Device node can contain video interface port
-			    nodes according to [1].
+Video interfaces:
+  Device node can contain video interface port nodes according to [1].
+  The following are properties specific to those nodes:
+
+  endpoint node connected to bridge or panel node:
+   - remote-endpoint: specifies the endpoint in panel or bridge node.
+		      This node is required in all kinds of exynos dp
+		      to represent the connection between dp and bridge
+		      or dp and panel.
 
 [1]: Documentation/devicetree/bindings/media/video-interfaces.txt
 
@@ -111,9 +135,18 @@ Board Specific portion:
 		};
 
 		ports {
-			port@0 {
+			port {
 				dp_out: endpoint {
-					remote-endpoint = <&bridge_in>;
+					remote-endpoint = <&dp_in>;
+				};
+			};
+		};
+
+		panel {
+			...
+			port {
+				dp_in: endpoint {
+					remote-endpoint = <&dp_out>;
 				};
 			};
 		};
diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
index f344b9e49198..e7423bea1424 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi.txt
+++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
@@ -14,17 +14,20 @@ Required properties:
 - clocks: device clocks
   See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
 - clock-names: the following clocks are required:
+  * "mdp_core_clk"
+  * "iface_clk"
   * "bus_clk"
-  * "byte_clk"
-  * "core_clk"
   * "core_mmss_clk"
-  * "iface_clk"
-  * "mdp_core_clk"
+  * "byte_clk"
   * "pixel_clk"
+  * "core_clk"
+  For DSIv2, we need an additional clock:
+   * "src_clk"
 - vdd-supply: phandle to vdd regulator device node
 - vddio-supply: phandle to vdd-io regulator device node
 - vdda-supply: phandle to vdda regulator device node
 - qcom,dsi-phy: phandle to DSI PHY device node
+- syscon-sfpb: A phandle to mmss_sfpb syscon node (only for DSIv2)
 
 Optional properties:
 - panel@0: Node of panel connected to this DSI controller.
@@ -51,6 +54,7 @@ Required properties:
   * "qcom,dsi-phy-28nm-hpm"
   * "qcom,dsi-phy-28nm-lp"
   * "qcom,dsi-phy-20nm"
+  * "qcom,dsi-phy-28nm-8960"
 - reg: Physical base address and length of the registers of PLL, PHY and PHY
   regulator
 - reg-names: The names of register regions. The following regions are required:
diff --git a/Documentation/devicetree/bindings/display/msm/mdp.txt b/Documentation/devicetree/bindings/display/msm/mdp.txt
index 0833edaba4c3..a214f6cd0363 100644
--- a/Documentation/devicetree/bindings/display/msm/mdp.txt
+++ b/Documentation/devicetree/bindings/display/msm/mdp.txt
@@ -2,18 +2,28 @@ Qualcomm adreno/snapdragon display controller
 
 Required properties:
 - compatible:
-  * "qcom,mdp" - mdp4
+  * "qcom,mdp4" - mdp4
+  * "qcom,mdp5" - mdp5
 - reg: Physical base address and length of the controller's registers.
 - interrupts: The interrupt signal from the display controller.
 - connectors: array of phandles for output device(s)
 - clocks: device clocks
   See ../clocks/clock-bindings.txt for details.
-- clock-names: the following clocks are required:
-  * "core_clk"
-  * "iface_clk"
-  * "src_clk"
-  * "hdmi_clk"
-  * "mpd_clk"
+- clock-names: the following clocks are required.
+  For MDP4:
+   * "core_clk"
+   * "iface_clk"
+   * "lut_clk"
+   * "src_clk"
+   * "hdmi_clk"
+   * "mdp_clk"
+  For MDP5:
+   * "bus_clk"
+   * "iface_clk"
+   * "core_clk_src"
+   * "core_clk"
+   * "lut_clk" (some MDP5 versions may not need this)
+   * "vsync_clk"
 
 Optional properties:
 - gpus: phandle for gpu device
@@ -26,7 +36,7 @@ Example:
 	...
 
 	mdp: qcom,mdp@5100000 {
-		compatible = "qcom,mdp";
+		compatible = "qcom,mdp4";
 		reg = <0x05100000 0xf0000>;
 		interrupts = <GIC_SPI 75 0>;
 		connectors = <&hdmi>;
diff --git a/Documentation/devicetree/bindings/display/panel/boe,tv080wum-nl0.txt b/Documentation/devicetree/bindings/display/panel/boe,tv080wum-nl0.txt
new file mode 100644
index 000000000000..50be5e2438b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/boe,tv080wum-nl0.txt
@@ -0,0 +1,7 @@
+Boe Corporation 8.0" WUXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "boe,tv080wum-nl0"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/innolux,g121x1-l03.txt b/Documentation/devicetree/bindings/display/panel/innolux,g121x1-l03.txt
new file mode 100644
index 000000000000..649744620ae1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/innolux,g121x1-l03.txt
@@ -0,0 +1,7 @@
+Innolux Corporation 12.1" G121X1-L03 XGA (1024x768) TFT LCD panel
+
+Required properties:
+- compatible: should be "innolux,g121x1-l03"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/kyo,tcg121xglp.txt b/Documentation/devicetree/bindings/display/panel/kyo,tcg121xglp.txt
new file mode 100644
index 000000000000..a8e940fe731e
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/kyo,tcg121xglp.txt
@@ -0,0 +1,7 @@
+Kyocera Corporation 12.1" XGA (1024x768) TFT LCD panel
+
+Required properties:
+- compatible: should be "kyo,tcg121xglp"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/panasonic,vvx10f034n00.txt b/Documentation/devicetree/bindings/display/panel/panasonic,vvx10f034n00.txt
new file mode 100644
index 000000000000..37dedf6a6702
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/panasonic,vvx10f034n00.txt
@@ -0,0 +1,20 @@
+Panasonic 10" WUXGA TFT LCD panel
+
+Required properties:
+- compatible: should be "panasonic,vvx10f034n00"
+- reg: DSI virtual channel of the peripheral
+- power-supply: phandle of the regulator that provides the supply voltage
+
+Optional properties:
+- backlight: phandle of the backlight device attached to the panel
+
+Example:
+
+	mdss_dsi@fd922800 {
+		panel@0 {
+			compatible = "panasonic,vvx10f034n00";
+			reg = <0>;
+			power-supply = <&vreg_vsp>;
+			backlight = <&lp8566_wled>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/display/panel/qiaodian,qd43003c0-40.txt b/Documentation/devicetree/bindings/display/panel/qiaodian,qd43003c0-40.txt
new file mode 100644
index 000000000000..0fbdab89ac3d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/qiaodian,qd43003c0-40.txt
@@ -0,0 +1,7 @@
+QiaoDian XianShi Corporation 4"3 TFT LCD panel
+
+Required properties:
+- compatible: should be "qiaodian,qd43003c0-40"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.txt b/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.txt
new file mode 100644
index 000000000000..3770a111968b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/sharp,ls043t1le01.txt
@@ -0,0 +1,22 @@
+Sharp Microelectronics 4.3" qHD TFT LCD panel
+
+Required properties:
+- compatible: should be "sharp,ls043t1le01-qhd"
+- reg: DSI virtual channel of the peripheral
+- power-supply: phandle of the regulator that provides the supply voltage
+
+Optional properties:
+- backlight: phandle of the backlight device attached to the panel
+- reset-gpios: a GPIO spec for the reset pin
+
+Example:
+
+	mdss_dsi@fd922800 {
+		panel@0 {
+			compatible = "sharp,ls043t1le01-qhd";
+			reg = <0>;
+			avdd-supply = <&pm8941_l22>;
+			backlight = <&pm8941_wled>;
+			reset-gpios = <&pm8941_gpios 19 GPIO_ACTIVE_HIGH>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
new file mode 100644
index 000000000000..1753f0cc6fad
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
@@ -0,0 +1,60 @@
+Rockchip specific extensions to the Synopsys Designware MIPI DSI
+================================
+
+Required properties:
+- #address-cells: Should be <1>.
+- #size-cells: Should be <0>.
+- compatible: "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi".
+- reg: Represent the physical address range of the controller.
+- interrupts: Represent the controller's interrupt to the CPU(s).
+- clocks, clock-names: Phandles to the controller's pll reference
+  clock(ref) and APB clock(pclk), as described in [1].
+- rockchip,grf: this soc should set GRF regs to mux vopl/vopb.
+- ports: contain a port node with endpoint definitions as defined in [2].
+  For vopb,set the reg = <0> and set the reg = <1> for vopl.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/media/video-interfaces.txt
+
+Example:
+	mipi_dsi: mipi@ff960000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "rockchip,rk3288-mipi-dsi", "snps,dw-mipi-dsi";
+		reg = <0xff960000 0x4000>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_MIPI_24M>, <&cru PCLK_MIPI_DSI0>;
+		clock-names = "ref", "pclk";
+		rockchip,grf = <&grf>;
+		status = "okay";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			mipi_in: port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				mipi_in_vopb: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&vopb_out_mipi>;
+				};
+				mipi_in_vopl: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&vopl_out_mipi>;
+				};
+			};
+		};
+
+		panel {
+			compatible ="boe,tv080wum-nl0";
+			reg = <0>;
+
+			enable-gpios = <&gpio7 3 GPIO_ACTIVE_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&lcd_en>;
+			backlight = <&backlight>;
+			status = "okay";
+		};
+	};
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt
index d15351f2313d..5489b59e3d41 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.txt
@@ -7,6 +7,7 @@ buffer to an external LCD interface.
 Required properties:
 - compatible: value should be one of the following
 		"rockchip,rk3288-vop";
+		"rockchip,rk3036-vop";
 
 - interrupts: should contain a list of all VOP IP block interrupts in the
 		 order: VSYNC, LCD_SYSTEM. The interrupt specifier
diff --git a/Documentation/devicetree/bindings/media/exynos5-gsc.txt b/Documentation/devicetree/bindings/media/exynos5-gsc.txt
index 0604d42f38d1..5fe9372abb37 100644
--- a/Documentation/devicetree/bindings/media/exynos5-gsc.txt
+++ b/Documentation/devicetree/bindings/media/exynos5-gsc.txt
@@ -7,6 +7,10 @@ Required properties:
 - reg: should contain G-Scaler physical address location and length.
 - interrupts: should contain G-Scaler interrupt number
 
+Optional properties:
+- samsung,sysreg: handle to syscon used to control the system registers to
+  set writeback input and destination
+
 Example:
 
 gsc_0:  gsc@0x13e00000 {
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index a4f2035569ce..084439d35747 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -33,6 +33,7 @@ auo	AU Optronics Corporation
 avago	Avago Technologies
 avic	Shanghai AVIC Optoelectronics Co., Ltd.
 axis	Axis Communications AB
+boe	BOE Technology Group Co., Ltd.
 bosch	Bosch Sensortec GmbH
 boundary	Boundary Devices Inc.
 brcm	Broadcom Corporation
@@ -123,6 +124,7 @@ jedec	JEDEC Solid State Technology Association
 karo	Ka-Ro electronics GmbH
 keymile	Keymile GmbH
 kinetic Kinetic Technologies
+kyo	Kyocera Corporation
 lacie	LaCie
 lantiq	Lantiq Semiconductor
 lenovo	Lenovo Group Ltd.
@@ -181,6 +183,7 @@ qca	Qualcomm Atheros, Inc.
 qcom	Qualcomm Technologies, Inc
 qemu	QEMU, a generic and open source machine emulator and virtualizer
 qi	Qi Hardware
+qiaodian	QiaoDian XianShi Corporation
 qnap	QNAP Systems, Inc.
 radxa	Radxa
 raidsonic	RaidSonic Technology GmbH
@@ -239,6 +242,7 @@ v3	V3 Semiconductor
 variscite	Variscite Ltd.
 via	VIA Technologies, Inc.
 virtio	Virtual I/O Device Specification, developed by the OASIS consortium
+vivante	Vivante Corporation
 voipac	Voipac Technologies s.r.o.
 wexler	Wexler
 winbond Winbond Electronics corp.