Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Olof Johansson:
 "Some of the larger changes this merge window:

   - Removal of drivers for Exynos5440, a Samsung SoC that never saw
     widespread use.

   - Uniphier support for USB3 and SPI reset handling

   - Syste control and SRAM drivers and bindings for Allwinner platforms

   - Qualcomm AOSS (Always-on subsystem) reset controller drivers

   - Raspberry Pi hwmon driver for voltage

   - Mediatek pwrap (pmic) support for MT6797 SoC"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (52 commits)
  drivers/firmware: psci_checker: stash and use topology_core_cpumask for hotplug tests
  soc: fsl: cleanup Kconfig menu
  soc: fsl: dpio: Convert DPIO documentation to .rst
  staging: fsl-mc: Remove remaining files
  staging: fsl-mc: Move DPIO from staging to drivers/soc/fsl
  staging: fsl-dpaa2: eth: move generic FD defines to DPIO
  soc: fsl: qe: gpio: Add qe_gpio_set_multiple
  usb: host: exynos: Remove support for Exynos5440
  clk: samsung: Remove support for Exynos5440
  soc: sunxi: Add the A13, A23 and H3 system control compatibles
  reset: uniphier: add reset control support for SPI
  cpufreq: exynos: Remove support for Exynos5440
  ata: ahci-platform: Remove support for Exynos5440
  soc: imx6qp: Use GENPD_FLAG_ALWAYS_ON for PU errata
  soc: mediatek: pwrap: add mt6351 driver for mt6797 SoCs
  soc: mediatek: pwrap: add pwrap driver for mt6797 SoCs
  soc: mediatek: pwrap: fix cipher init setting error
  dt-bindings: pwrap: mediatek: add pwrap support for MT6797
  reset: uniphier: add USB3 core reset control
  dt-bindings: reset: uniphier: add USB3 core reset support
  ...

13 files changed, 359 insertions, 61 deletions

diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt
index c052caad36e8..104cc9b41df4 100644
--- a/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt
@@ -189,7 +189,11 @@ Power-Down (SRPD), among other things.
 
 Required properties:
 - compatible     : should contain one of these
+	"brcm,brcmstb-memc-ddr-rev-b.2.1"
 	"brcm,brcmstb-memc-ddr-rev-b.2.2"
+	"brcm,brcmstb-memc-ddr-rev-b.2.3"
+	"brcm,brcmstb-memc-ddr-rev-b.3.0"
+	"brcm,brcmstb-memc-ddr-rev-b.3.1"
 	"brcm,brcmstb-memc-ddr"
 - reg            : the MEMC DDR register range
 
diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
index c760ecb81381..663766685818 100644
--- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt
@@ -17,7 +17,6 @@ Required properties:
   - "marvell,armada-380-ahci"
   - "marvell,armada-3700-ahci"
   - "snps,dwc-ahci"
-  - "snps,exynos5440-ahci"
   - "snps,spear-ahci"
   - "generic-ahci"
 - interrupts        : <interrupt mapping for SATA IRQ>
diff --git a/Documentation/devicetree/bindings/bus/sun50i-de2-bus.txt b/Documentation/devicetree/bindings/bus/sun50i-de2-bus.txt
new file mode 100644
index 000000000000..87dfb33fb3be
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/sun50i-de2-bus.txt
@@ -0,0 +1,37 @@
+Device tree bindings for Allwinner A64 DE2 bus
+
+The Allwinner A64 DE2 is on a special bus, which needs a SRAM region (SRAM C)
+to be claimed for enabling the access.
+
+Required properties:
+
+ - compatible:		Should contain "allwinner,sun50i-a64-de2"
+ - reg:			A resource specifier for the register space
+ - #address-cells:	Must be set to 1
+ - #size-cells:		Must be set to 1
+ - ranges:		Must be set up to map the address space inside the
+			DE2, for the sub-blocks of DE2.
+ - allwinner,sram:	the SRAM that needs to be claimed
+
+Example:
+
+	de2@1000000 {
+		compatible = "allwinner,sun50i-a64-de2";
+		reg = <0x1000000 0x400000>;
+		allwinner,sram = <&de2_sram 1>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x1000000 0x400000>;
+
+		display_clocks: clock@0 {
+			compatible = "allwinner,sun50i-a64-de2-clk";
+			reg = <0x0 0x100000>;
+			clocks = <&ccu CLK_DE>,
+				 <&ccu CLK_BUS_DE>;
+			clock-names = "mod",
+				      "bus";
+			resets = <&ccu RST_BUS_DE>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/bus/ti-sysc.txt b/Documentation/devicetree/bindings/bus/ti-sysc.txt
index d8ed5b780ed9..91dc2333af01 100644
--- a/Documentation/devicetree/bindings/bus/ti-sysc.txt
+++ b/Documentation/devicetree/bindings/bus/ti-sysc.txt
@@ -36,6 +36,7 @@ Required standard properties:
 		"ti,sysc-omap-aes"
 		"ti,sysc-mcasp"
 		"ti,sysc-usb-host-fs"
+		"ti,sysc-dra7-mcan"
 
 - reg		shall have register areas implemented for the interconnect
 		target module in question such as revision, sysc and syss
diff --git a/Documentation/devicetree/bindings/clock/exynos5440-clock.txt b/Documentation/devicetree/bindings/clock/exynos5440-clock.txt
deleted file mode 100644
index c7d227c31e95..000000000000
--- a/Documentation/devicetree/bindings/clock/exynos5440-clock.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-* Samsung Exynos5440 Clock Controller
-
-The Exynos5440 clock controller generates and supplies clock to various
-controllers within the Exynos5440 SoC.
-
-Required Properties:
-
-- compatible: should be "samsung,exynos5440-clock".
-
-- reg: physical base address of the controller and length of memory mapped
-  region.
-
-- #clock-cells: should be 1.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume.
-
-All available clocks are defined as preprocessor macros in
-dt-bindings/clock/exynos5440.h header and can be used in device
-tree sources.
-
-Example: An example of a clock controller node is listed below.
-
-	clock: clock-controller@10010000 {
-		compatible = "samsung,exynos5440-clock";
-		reg = <0x160000 0x10000>;
-		#clock-cells = <1>;
-	};
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-exynos5440.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-exynos5440.txt
deleted file mode 100644
index caff1a57436f..000000000000
--- a/Documentation/devicetree/bindings/cpufreq/cpufreq-exynos5440.txt
+++ /dev/null
@@ -1,28 +0,0 @@
-
-Exynos5440 cpufreq driver
--------------------
-
-Exynos5440 SoC cpufreq driver for CPU frequency scaling.
-
-Required properties:
-- interrupts: Interrupt to know the completion of cpu frequency change.
-- operating-points: Table of frequencies and voltage CPU could be transitioned into,
-	in the decreasing order. Frequency should be in KHz units and voltage
-	should be in microvolts.
-
-Optional properties:
-- clock-latency: Clock monitor latency in microsecond.
-
-All the required listed above must be defined under node cpufreq.
-
-Example:
---------
-	cpufreq@160000 {
-		compatible = "samsung,exynos5440-cpufreq";
-		reg = <0x160000 0x1000>;
-		interrupts = <0 57 0>;
-		operating-points = <
-				1000000 975000
-				800000  925000>;
-		clock-latency = <100000>;
-	};
diff --git a/Documentation/devicetree/bindings/reset/qcom,aoss-reset.txt b/Documentation/devicetree/bindings/reset/qcom,aoss-reset.txt
new file mode 100644
index 000000000000..510c748656ec
--- /dev/null
+++ b/Documentation/devicetree/bindings/reset/qcom,aoss-reset.txt
@@ -0,0 +1,52 @@
+Qualcomm AOSS Reset Controller
+======================================
+
+This binding describes a reset-controller found on AOSS-CC (always on subsystem)
+for Qualcomm SDM845 SoCs.
+
+Required properties:
+- compatible:
+	Usage: required
+	Value type: <string>
+	Definition: must be:
+		    "qcom,sdm845-aoss-cc"
+
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: must specify the base address and size of the register
+	            space.
+
+- #reset-cells:
+	Usage: required
+	Value type: <uint>
+	Definition: must be 1; cell entry represents the reset index.
+
+Example:
+
+aoss_reset: reset-controller@c2a0000 {
+	compatible = "qcom,sdm845-aoss-cc";
+	reg = <0xc2a0000 0x31000>;
+	#reset-cells = <1>;
+};
+
+Specifying reset lines connected to IP modules
+==============================================
+
+Device nodes that need access to reset lines should
+specify them as a reset phandle in their corresponding node as
+specified in reset.txt.
+
+For list of all valid reset indicies see
+<dt-bindings/reset/qcom,sdm845-aoss.h>
+
+Example:
+
+modem-pil@4080000 {
+	...
+
+	resets = <&aoss_reset AOSS_CC_MSS_RESTART>;
+	reset-names = "mss_restart";
+
+	...
+};
diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
index 93efed629900..101743dda223 100644
--- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt
+++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
@@ -118,3 +118,59 @@ Example:
 
 		other nodes ...
 	};
+
+
+USB3 core reset
+---------------
+
+USB3 core reset belongs to USB3 glue layer. Before using the core reset,
+it is necessary to control the clocks and resets to enable this layer.
+These clocks and resets should be described in each property.
+
+Required properties:
+- compatible: Should be
+    "socionext,uniphier-pro4-usb3-reset" - for Pro4 SoC
+    "socionext,uniphier-pxs2-usb3-reset" - for PXs2 SoC
+    "socionext,uniphier-ld20-usb3-reset" - for LD20 SoC
+    "socionext,uniphier-pxs3-usb3-reset" - for PXs3 SoC
+- #reset-cells: Should be 1.
+- reg: Specifies offset and length of the register set for the device.
+- clocks: A list of phandles to the clock gate for USB3 glue layer.
+	According to the clock-names, appropriate clocks are required.
+- clock-names: Should contain
+    "gio", "link" - for Pro4 SoC
+    "link"        - for others
+- resets: A list of phandles to the reset control for USB3 glue layer.
+	According to the reset-names, appropriate resets are required.
+- reset-names: Should contain
+    "gio", "link" - for Pro4 SoC
+    "link"        - for others
+
+Example:
+
+	usb-glue@65b00000 {
+		compatible = "socionext,uniphier-ld20-dwc3-glue",
+			     "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x65b00000 0x400>;
+
+		usb_rst: reset@0 {
+			compatible = "socionext,uniphier-ld20-usb3-reset";
+			reg = <0x0 0x4>;
+			#reset-cells = <1>;
+			clock-names = "link";
+			clocks = <&sys_clk 14>;
+			reset-names = "link";
+			resets = <&sys_rst 14>;
+		};
+
+		regulator {
+			...
+		};
+
+		phy {
+			...
+		};
+		...
+	};
diff --git a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
index bf80e3f96f8c..f9987c30f0d5 100644
--- a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
+++ b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
@@ -19,6 +19,7 @@ IP Pairing
 Required properties in pwrap device node.
 - compatible:
 	"mediatek,mt2701-pwrap" for MT2701/7623 SoCs
+	"mediatek,mt6797-pwrap" for MT6797 SoCs
 	"mediatek,mt7622-pwrap" for MT7622 SoCs
 	"mediatek,mt8135-pwrap" for MT8135 SoCs
 	"mediatek,mt8173-pwrap" for MT8173 SoCs
diff --git a/Documentation/devicetree/bindings/sram/sunxi-sram.txt b/Documentation/devicetree/bindings/sram/sunxi-sram.txt
index d087f04a4d7f..c51ade86578c 100644
--- a/Documentation/devicetree/bindings/sram/sunxi-sram.txt
+++ b/Documentation/devicetree/bindings/sram/sunxi-sram.txt
@@ -10,8 +10,14 @@ Controller Node
 
 Required properties:
 - compatible : should be:
-    - "allwinner,sun4i-a10-sram-controller"
-    - "allwinner,sun50i-a64-sram-controller"
+    - "allwinner,sun4i-a10-sram-controller" (deprecated)
+    - "allwinner,sun4i-a10-system-control"
+    - "allwinner,sun5i-a13-system-control"
+    - "allwinner,sun7i-a20-system-control", "allwinner,sun4i-a10-system-control"
+    - "allwinner,sun8i-a23-system-control"
+    - "allwinner,sun8i-h3-system-control"
+    - "allwinner,sun50i-a64-sram-controller" (deprecated)
+    - "allwinner,sun50i-a64-system-control"
 - reg : sram controller register offset + length
 
 SRAM nodes
@@ -26,8 +32,25 @@ once again the representation described in the mmio-sram binding.
 
 The valid sections compatible for A10 are:
     - allwinner,sun4i-a10-sram-a3-a4
+    - allwinner,sun4i-a10-sram-c1
     - allwinner,sun4i-a10-sram-d
 
+The valid sections compatible for A13 are:
+    - allwinner,sun5i-a13-sram-a3-a4, allwinner,sun4i-a10-sram-a3-a4
+    - allwinner,sun5i-a13-sram-c1, allwinner,sun4i-a10-sram-c1
+    - allwinner,sun5i-a13-sram-d, allwinner,sun4i-a10-sram-d
+
+The valid sections compatible for A20 are:
+    - allwinner,sun7i-a20-sram-a3-a4, allwinner,sun4i-a10-sram-a3-a4
+    - allwinner,sun7i-a20-sram-c1, allwinner,sun4i-a10-sram-c1
+    - allwinner,sun7i-a20-sram-d, allwinner,sun4i-a10-sram-d
+
+The valid sections compatible for A23/A33 are:
+    - allwinner,sun8i-a23-sram-c1, allwinner,sun4i-a10-sram-c1
+
+The valid sections compatible for H3 are:
+    - allwinner,sun8i-h3-sram-c1, allwinner,sun4i-a10-sram-c1
+
 The valid sections compatible for A64 are:
     - allwinner,sun50i-a64-sram-c
 
@@ -47,8 +70,8 @@ This valid values for this argument are:
 
 Example
 -------
-sram-controller@1c00000 {
-	compatible = "allwinner,sun4i-a10-sram-controller";
+system-control@1c00000 {
+	compatible = "allwinner,sun4i-a10-system-control";
 	reg = <0x01c00000 0x30>;
 	#address-cells = <1>;
 	#size-cells = <1>;
diff --git a/Documentation/hwmon/raspberrypi-hwmon b/Documentation/hwmon/raspberrypi-hwmon
new file mode 100644
index 000000000000..3c92e2cb52d6
--- /dev/null
+++ b/Documentation/hwmon/raspberrypi-hwmon
@@ -0,0 +1,22 @@
+Kernel driver raspberrypi-hwmon
+===============================
+
+Supported boards:
+  * Raspberry Pi A+ (via GPIO on SoC)
+  * Raspberry Pi B+ (via GPIO on SoC)
+  * Raspberry Pi 2 B (via GPIO on SoC)
+  * Raspberry Pi 3 B (via GPIO on port expander)
+  * Raspberry Pi 3 B+ (via PMIC)
+
+Author: Stefan Wahren <stefan.wahren@i2se.com>
+
+Description
+-----------
+
+This driver periodically polls a mailbox property of the VC4 firmware to detect
+undervoltage conditions.
+
+Sysfs entries
+-------------
+
+in0_lcrit_alarm		Undervoltage alarm
diff --git a/Documentation/networking/dpaa2/dpio-driver.rst b/Documentation/networking/dpaa2/dpio-driver.rst
new file mode 100644
index 000000000000..13588104161b
--- /dev/null
+++ b/Documentation/networking/dpaa2/dpio-driver.rst
@@ -0,0 +1,158 @@
+.. include:: <isonum.txt>
+
+DPAA2 DPIO (Data Path I/O) Overview
+===================================
+
+:Copyright: |copy| 2016-2018 NXP
+
+This document provides an overview of the Freescale DPAA2 DPIO
+drivers
+
+Introduction
+============
+
+A DPAA2 DPIO (Data Path I/O) is a hardware object that provides
+interfaces to enqueue and dequeue frames to/from network interfaces
+and other accelerators.  A DPIO also provides hardware buffer
+pool management for network interfaces.
+
+This document provides an overview the Linux DPIO driver, its
+subcomponents, and its APIs.
+
+See Documentation/networking/dpaa2/overview.rst for a general overview of DPAA2
+and the general DPAA2 driver architecture in Linux.
+
+Driver Overview
+---------------
+
+The DPIO driver is bound to DPIO objects discovered on the fsl-mc bus and
+provides services that:
+  A) allow other drivers, such as the Ethernet driver, to enqueue and dequeue
+     frames for their respective objects
+  B) allow drivers to register callbacks for data availability notifications
+     when data becomes available on a queue or channel
+  C) allow drivers to manage hardware buffer pools
+
+The Linux DPIO driver consists of 3 primary components--
+   DPIO object driver-- fsl-mc driver that manages the DPIO object
+
+   DPIO service-- provides APIs to other Linux drivers for services
+
+   QBman portal interface-- sends portal commands, gets responses
+::
+
+          fsl-mc          other
+           bus           drivers
+            |               |
+        +---+----+   +------+-----+
+        |DPIO obj|   |DPIO service|
+        | driver |---|  (DPIO)    |
+        +--------+   +------+-----+
+                            |
+                     +------+-----+
+                     |    QBman   |
+                     | portal i/f |
+                     +------------+
+                            |
+                         hardware
+
+
+The diagram below shows how the DPIO driver components fit with the other
+DPAA2 Linux driver components::
+                                                   +------------+
+                                                   | OS Network |
+                                                   |   Stack    |
+                 +------------+                    +------------+
+                 | Allocator  |. . . . . . .       |  Ethernet  |
+                 |(DPMCP,DPBP)|                    |   (DPNI)   |
+                 +-.----------+                    +---+---+----+
+                  .          .                         ^   |
+                 .            .           <data avail, |   |<enqueue,
+                .              .           tx confirm> |   | dequeue>
+    +-------------+             .                      |   |
+    | DPRC driver |              .    +--------+ +------------+
+    |   (DPRC)    |               . . |DPIO obj| |DPIO service|
+    +----------+--+                   | driver |-|  (DPIO)    |
+               |                      +--------+ +------+-----+
+               |<dev add/remove>                 +------|-----+
+               |                                 |   QBman    |
+          +----+--------------+                  | portal i/f |
+          |   MC-bus driver   |                  +------------+
+          |                   |                     |
+          | /soc/fsl-mc       |                     |
+          +-------------------+                     |
+                                                    |
+ =========================================|=========|========================
+                                        +-+--DPIO---|-----------+
+                                        |           |           |
+                                        |        QBman Portal   |
+                                        +-----------------------+
+
+ ============================================================================
+
+
+DPIO Object Driver (dpio-driver.c)
+----------------------------------
+
+   The dpio-driver component registers with the fsl-mc bus to handle objects of
+   type "dpio".  The implementation of probe() handles basic initialization
+   of the DPIO including mapping of the DPIO regions (the QBman SW portal)
+   and initializing interrupts and registering irq handlers.  The dpio-driver
+   registers the probed DPIO with dpio-service.
+
+DPIO service  (dpio-service.c, dpaa2-io.h)
+------------------------------------------
+
+   The dpio service component provides queuing, notification, and buffers
+   management services to DPAA2 drivers, such as the Ethernet driver.  A system
+   will typically allocate 1 DPIO object per CPU to allow queuing operations
+   to happen simultaneously across all CPUs.
+
+   Notification handling
+      dpaa2_io_service_register()
+
+      dpaa2_io_service_deregister()
+
+      dpaa2_io_service_rearm()
+
+   Queuing
+      dpaa2_io_service_pull_fq()
+
+      dpaa2_io_service_pull_channel()
+
+      dpaa2_io_service_enqueue_fq()
+
+      dpaa2_io_service_enqueue_qd()
+
+      dpaa2_io_store_create()
+
+      dpaa2_io_store_destroy()
+
+      dpaa2_io_store_next()
+
+   Buffer pool management
+      dpaa2_io_service_release()
+
+      dpaa2_io_service_acquire()
+
+QBman portal interface (qbman-portal.c)
+---------------------------------------
+
+   The qbman-portal component provides APIs to do the low level hardware
+   bit twiddling for operations such as:
+      -initializing Qman software portals
+
+      -building and sending portal commands
+
+      -portal interrupt configuration and processing
+
+   The qbman-portal APIs are not public to other drivers, and are
+   only used by dpio-service.
+
+Other (dpaa2-fd.h, dpaa2-global.h)
+----------------------------------
+
+   Frame descriptor and scatter-gather definitions and the APIs used to
+   manipulate them are defined in dpaa2-fd.h.
+
+   Dequeue result struct and parsing APIs are defined in dpaa2-global.h.
diff --git a/Documentation/networking/dpaa2/index.rst b/Documentation/networking/dpaa2/index.rst
index 4c6586c87969..10bea113a7bc 100644
--- a/Documentation/networking/dpaa2/index.rst
+++ b/Documentation/networking/dpaa2/index.rst
@@ -6,3 +6,4 @@ DPAA2 Documentation
    :maxdepth: 1
 
    overview
+   dpio-driver