summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2015-11-10 15:00:03 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2015-11-10 15:00:03 -0800
commitb44a3d2a85c64208a57362a1728efb58a6556cd6 (patch)
tree293302b3ac918eb75b442fa035eb976850163b1d /Documentation
parent56e0464980febfa50432a070261579415c72664e (diff)
parentd13a5c8c4c3dbe299659bcff805f79a2c83e2bbc (diff)
downloadlinux-b44a3d2a85c64208a57362a1728efb58a6556cd6.tar.bz2
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver updates from Olof Johansson: "As we've enabled multiplatform kernels on ARM, and greatly done away with the contents under arch/arm/mach-*, there's still need for SoC-related drivers to go somewhere. Many of them go in through other driver trees, but we still have drivers/soc to hold some of the "doesn't fit anywhere" lowlevel code that might be shared between ARM and ARM64 (or just in general makes sense to not have under the architecture directory). This branch contains mostly such code: - Drivers for qualcomm SoCs for SMEM, SMD and SMD-RPM, used to communicate with power management blocks on these SoCs for use by clock, regulator and bus frequency drivers. - Allwinner Reduced Serial Bus driver, again used to communicate with PMICs. - Drivers for ARM's SCPI (System Control Processor). Not to be confused with PSCI (Power State Coordination Interface). SCPI is used to communicate with the assistant embedded cores doing power management, and we have yet to see how many of them will implement this for their hardware vs abstracting in other ways (or not at all like in the past). - To make confusion between SCPI and PSCI more likely, this release also includes an update of PSCI to interface version 1.0. - Rockchip support for power domains. - A driver to talk to the firmware on Raspberry Pi" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (57 commits) soc: qcom: smd-rpm: Correct size of outgoing message bus: sunxi-rsb: Add driver for Allwinner Reduced Serial Bus bus: sunxi-rsb: Add Allwinner Reduced Serial Bus (RSB) controller bindings ARM: bcm2835: add mutual inclusion protection drivers: psci: make PSCI 1.0 functions initialization version dependent dt-bindings: Correct paths in Rockchip power domains binding document soc: rockchip: power-domain: don't try to print the clock name in error case soc: qcom/smem: add HWSPINLOCK dependency clk: berlin: add cpuclk ARM: berlin: dts: add CLKID_CPU for BG2Q ARM: bcm2835: Add the Raspberry Pi firmware driver soc: qcom: smem: Move RPM message ram out of smem DT node soc: qcom: smd-rpm: Correct the active vs sleep state flagging soc: qcom: smd: delete unneeded of_node_put firmware: qcom-scm: build for correct architecture level soc: qcom: smd: Correct SMEM items for upper channels qcom-scm: add missing prototype for qcom_scm_is_available() qcom-scm: fix endianess issue in __qcom_scm_is_call_available soc: qcom: smd: Reject send of too big packets soc: qcom: smd: Handle big endian CPUs ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/arm/arm,scpi.txt188
-rw-r--r--Documentation/devicetree/bindings/arm/psci.txt6
-rw-r--r--Documentation/devicetree/bindings/bus/sunxi-rsb.txt47
-rw-r--r--Documentation/devicetree/bindings/memory-controllers/arm,pl172.txt8
-rw-r--r--Documentation/devicetree/bindings/soc/rockchip/power_domain.txt46
-rw-r--r--Documentation/hwmon/scpi-hwmon33
6 files changed, 325 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/arm/arm,scpi.txt b/Documentation/devicetree/bindings/arm/arm,scpi.txt
new file mode 100644
index 000000000000..86302de67c2c
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/arm,scpi.txt
@@ -0,0 +1,188 @@
+System Control and Power Interface (SCPI) Message Protocol
+----------------------------------------------------------
+
+Firmware implementing the SCPI described in ARM document number ARM DUI 0922B
+("ARM Compute Subsystem SCP: Message Interface Protocols")[0] can be used
+by Linux to initiate various system control and power operations.
+
+Required properties:
+
+- compatible : should be "arm,scpi"
+- mboxes: List of phandle and mailbox channel specifiers
+ All the channels reserved by remote SCP firmware for use by
+ SCPI message protocol should be specified in any order
+- shmem : List of phandle pointing to the shared memory(SHM) area between the
+ processors using these mailboxes for IPC, one for each mailbox
+ SHM can be any memory reserved for the purpose of this communication
+ between the processors.
+
+See Documentation/devicetree/bindings/mailbox/mailbox.txt
+for more details about the generic mailbox controller and
+client driver bindings.
+
+Clock bindings for the clocks based on SCPI Message Protocol
+------------------------------------------------------------
+
+This binding uses the common clock binding[1].
+
+Container Node
+==============
+Required properties:
+- compatible : should be "arm,scpi-clocks"
+ All the clocks provided by SCP firmware via SCPI message
+ protocol much be listed as sub-nodes under this node.
+
+Sub-nodes
+=========
+Required properties:
+- compatible : shall include one of the following
+ "arm,scpi-dvfs-clocks" - all the clocks that are variable and index based.
+ These clocks don't provide an entire range of values between the
+ limits but only discrete points within the range. The firmware
+ provides the mapping for each such operating frequency and the
+ index associated with it. The firmware also manages the
+ voltage scaling appropriately with the clock scaling.
+ "arm,scpi-variable-clocks" - all the clocks that are variable and provide full
+ range within the specified range. The firmware provides the
+ range of values within a specified range.
+
+Other required properties for all clocks(all from common clock binding):
+- #clock-cells : Should be 1. Contains the Clock ID value used by SCPI commands.
+- clock-output-names : shall be the corresponding names of the outputs.
+- clock-indices: The identifying number for the clocks(i.e.clock_id) in the
+ node. It can be non linear and hence provide the mapping of identifiers
+ into the clock-output-names array.
+
+SRAM and Shared Memory for SCPI
+-------------------------------
+
+A small area of SRAM is reserved for SCPI communication between application
+processors and SCP.
+
+Required properties:
+- compatible : should be "arm,juno-sram-ns" for Non-secure SRAM on Juno
+
+The rest of the properties should follow the generic mmio-sram description
+found in ../../misc/sysram.txt
+
+Each sub-node represents the reserved area for SCPI.
+
+Required sub-node properties:
+- reg : The base offset and size of the reserved area with the SRAM
+- compatible : should be "arm,juno-scp-shmem" for Non-secure SRAM based
+ shared memory on Juno platforms
+
+Sensor bindings for the sensors based on SCPI Message Protocol
+--------------------------------------------------------------
+SCPI provides an API to access the various sensors on the SoC.
+
+Required properties:
+- compatible : should be "arm,scpi-sensors".
+- #thermal-sensor-cells: should be set to 1. This property follows the
+ thermal device tree bindings[2].
+
+ Valid cell values are raw identifiers (Sensor
+ ID) as used by the firmware. Refer to
+ platform documentation for your
+ implementation for the IDs to use. For Juno
+ R0 and Juno R1 refer to [3].
+
+[0] http://infocenter.arm.com/help/topic/com.arm.doc.dui0922b/index.html
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/thermal/thermal.txt
+[3] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dui0922b/apas03s22.html
+
+Example:
+
+sram: sram@50000000 {
+ compatible = "arm,juno-sram-ns", "mmio-sram";
+ reg = <0x0 0x50000000 0x0 0x10000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x0 0x50000000 0x10000>;
+
+ cpu_scp_lpri: scp-shmem@0 {
+ compatible = "arm,juno-scp-shmem";
+ reg = <0x0 0x200>;
+ };
+
+ cpu_scp_hpri: scp-shmem@200 {
+ compatible = "arm,juno-scp-shmem";
+ reg = <0x200 0x200>;
+ };
+};
+
+mailbox: mailbox0@40000000 {
+ ....
+ #mbox-cells = <1>;
+};
+
+scpi_protocol: scpi@2e000000 {
+ compatible = "arm,scpi";
+ mboxes = <&mailbox 0 &mailbox 1>;
+ shmem = <&cpu_scp_lpri &cpu_scp_hpri>;
+
+ clocks {
+ compatible = "arm,scpi-clocks";
+
+ scpi_dvfs: scpi_clocks@0 {
+ compatible = "arm,scpi-dvfs-clocks";
+ #clock-cells = <1>;
+ clock-indices = <0>, <1>, <2>;
+ clock-output-names = "atlclk", "aplclk","gpuclk";
+ };
+ scpi_clk: scpi_clocks@3 {
+ compatible = "arm,scpi-variable-clocks";
+ #clock-cells = <1>;
+ clock-indices = <3>, <4>;
+ clock-output-names = "pxlclk0", "pxlclk1";
+ };
+ };
+
+ scpi_sensors0: sensors {
+ compatible = "arm,scpi-sensors";
+ #thermal-sensor-cells = <1>;
+ };
+};
+
+cpu@0 {
+ ...
+ reg = <0 0>;
+ clocks = <&scpi_dvfs 0>;
+};
+
+hdlcd@7ff60000 {
+ ...
+ reg = <0 0x7ff60000 0 0x1000>;
+ clocks = <&scpi_clk 4>;
+};
+
+thermal-zones {
+ soc_thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <1000>;
+
+ /* sensor ID */
+ thermal-sensors = <&scpi_sensors0 3>;
+ ...
+ };
+};
+
+In the above example, the #clock-cells is set to 1 as required.
+scpi_dvfs has 3 output clocks namely: atlclk, aplclk, and gpuclk with 0,
+1 and 2 as clock-indices. scpi_clk has 2 output clocks namely: pxlclk0
+and pxlclk1 with 3 and 4 as clock-indices.
+
+The first consumer in the example is cpu@0 and it has '0' as the clock
+specifier which points to the first entry in the output clocks of
+scpi_dvfs i.e. "atlclk".
+
+Similarly the second example is hdlcd@7ff60000 and it has pxlclk1 as input
+clock. '4' in the clock specifier here points to the second entry
+in the output clocks of scpi_clocks i.e. "pxlclk1"
+
+The thermal-sensors property in the soc_thermal node uses the
+temperature sensor provided by SCP firmware to setup a thermal
+zone. The ID "3" is the sensor identifier for the temperature sensor
+as used by the firmware.
diff --git a/Documentation/devicetree/bindings/arm/psci.txt b/Documentation/devicetree/bindings/arm/psci.txt
index 5aa40ede0e99..a9adab84e2fe 100644
--- a/Documentation/devicetree/bindings/arm/psci.txt
+++ b/Documentation/devicetree/bindings/arm/psci.txt
@@ -31,6 +31,10 @@ Main node required properties:
support, but are permitted to be present for compatibility with
existing software when "arm,psci" is later in the compatible list.
+ * "arm,psci-1.0" : for implementations complying to PSCI 1.0. PSCI 1.0 is
+ backward compatible with PSCI 0.2 with minor specification updates,
+ as defined in the PSCI specification[2].
+
- method : The method of calling the PSCI firmware. Permitted
values are:
@@ -100,3 +104,5 @@ Case 3: PSCI v0.2 and PSCI v0.1.
[1] Kernel documentation - ARM idle states bindings
Documentation/devicetree/bindings/arm/idle-states.txt
+[2] Power State Coordination Interface (PSCI) specification
+ http://infocenter.arm.com/help/topic/com.arm.doc.den0022c/DEN0022C_Power_State_Coordination_Interface.pdf
diff --git a/Documentation/devicetree/bindings/bus/sunxi-rsb.txt b/Documentation/devicetree/bindings/bus/sunxi-rsb.txt
new file mode 100644
index 000000000000..3dd28343b6ce
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/sunxi-rsb.txt
@@ -0,0 +1,47 @@
+Allwinner Reduced Serial Bus (RSB) controller
+
+The RSB controller found on later Allwinner SoCs is an SMBus like 2 wire
+serial bus with 1 master and up to 15 slaves. It is represented by a node
+for the controller itself, and child nodes representing the slave devices.
+
+Required properties :
+
+ - reg : Offset and length of the register set for the controller.
+ - compatible : Shall be "allwinner,sun8i-a23-rsb".
+ - interrupts : The interrupt line associated to the RSB controller.
+ - clocks : The gate clk associated to the RSB controller.
+ - resets : The reset line associated to the RSB controller.
+ - #address-cells : shall be 1
+ - #size-cells : shall be 0
+
+Optional properties :
+
+ - clock-frequency : Desired RSB bus clock frequency in Hz. Maximum is 20MHz.
+ If not set this defaults to 3MHz.
+
+Child nodes:
+
+An RSB controller node can contain zero or more child nodes representing
+slave devices on the bus. Child 'reg' properties should contain the slave
+device's hardware address. The hardware address is hardwired in the device,
+which can normally be found in the datasheet.
+
+Example:
+
+ rsb@01f03400 {
+ compatible = "allwinner,sun8i-a23-rsb";
+ reg = <0x01f03400 0x400>;
+ interrupts = <0 39 4>;
+ clocks = <&apb0_gates 3>;
+ clock-frequency = <3000000>;
+ resets = <&apb0_rst 3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@3e3 {
+ compatible = "...";
+ reg = <0x3e3>;
+
+ /* ... */
+ };
+ };
diff --git a/Documentation/devicetree/bindings/memory-controllers/arm,pl172.txt b/Documentation/devicetree/bindings/memory-controllers/arm,pl172.txt
index e6df32f9986d..22b77ee02f58 100644
--- a/Documentation/devicetree/bindings/memory-controllers/arm,pl172.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/arm,pl172.txt
@@ -1,8 +1,9 @@
-* Device tree bindings for ARM PL172 MultiPort Memory Controller
+* Device tree bindings for ARM PL172/PL175/PL176 MultiPort Memory Controller
Required properties:
-- compatible: "arm,pl172", "arm,primecell"
+- compatible: Must be "arm,primecell" and exactly one from
+ "arm,pl172", "arm,pl175" or "arm,pl176".
- reg: Must contains offset/length value for controller.
@@ -56,7 +57,8 @@ Optional child cs node config properties:
- mpmc,extended-wait: Enable extended wait.
-- mpmc,buffer-enable: Enable write buffer.
+- mpmc,buffer-enable: Enable write buffer, option is not supported by
+ PL175 and PL176 controllers.
- mpmc,write-protect: Enable write protect.
diff --git a/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt b/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
new file mode 100644
index 000000000000..112756e11802
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
@@ -0,0 +1,46 @@
+* Rockchip Power Domains
+
+Rockchip processors include support for multiple power domains which can be
+powered up/down by software based on different application scenes to save power.
+
+Required properties for power domain controller:
+- compatible: Should be one of the following.
+ "rockchip,rk3288-power-controller" - for RK3288 SoCs.
+- #power-domain-cells: Number of cells in a power-domain specifier.
+ Should be 1 for multiple PM domains.
+- #address-cells: Should be 1.
+- #size-cells: Should be 0.
+
+Required properties for power domain sub nodes:
+- reg: index of the power domain, should use macros in:
+ "include/dt-bindings/power/rk3288-power.h" - for RK3288 type power domain.
+- clocks (optional): phandles to clocks which need to be enabled while power domain
+ switches state.
+
+Example:
+
+ power: power-controller {
+ compatible = "rockchip,rk3288-power-controller";
+ #power-domain-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pd_gpu {
+ reg = <RK3288_PD_GPU>;
+ clocks = <&cru ACLK_GPU>;
+ };
+ };
+
+Node of a device using power domains must have a power-domains property,
+containing a phandle to the power device node and an index specifying which
+power domain to use.
+The index should use macros in:
+ "include/dt-bindings/power/rk3288-power.h" - for rk3288 type power domain.
+
+Example of the node using power domain:
+
+ node {
+ /* ... */
+ power-domains = <&power RK3288_PD_GPU>;
+ /* ... */
+ };
diff --git a/Documentation/hwmon/scpi-hwmon b/Documentation/hwmon/scpi-hwmon
new file mode 100644
index 000000000000..4cfcdf2d5eab
--- /dev/null
+++ b/Documentation/hwmon/scpi-hwmon
@@ -0,0 +1,33 @@
+Kernel driver scpi-hwmon
+========================
+
+Supported chips:
+ * Chips based on ARM System Control Processor Interface
+ Addresses scanned: -
+ Datasheet: http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dui0922b/index.html
+
+Author: Punit Agrawal <punit.agrawal@arm.com>
+
+Description
+-----------
+
+This driver supports hardware monitoring for SoC's based on the ARM
+System Control Processor (SCP) implementing the System Control
+Processor Interface (SCPI). The following sensor types are supported
+by the SCP -
+
+ * temperature
+ * voltage
+ * current
+ * power
+
+The SCP interface provides an API to query the available sensors and
+their values which are then exported to userspace by this driver.
+
+Usage Notes
+-----------
+
+The driver relies on device tree node to indicate the presence of SCPI
+support in the kernel. See
+Documentation/devicetree/bindings/arm/arm,scpi.txt for details of the
+devicetree node. \ No newline at end of file