summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2017-05-02 17:34:32 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2017-05-02 17:34:32 -0700
commitbe580e7522eecfcf31c70abdf6fa0ae77b2e293b (patch)
tree1137d880a002ef342f9b1ab77331144c9ed956cf /Documentation
parent8d65b08debc7e62b2c6032d7fe7389d895b92cbc (diff)
parenta627f025eb0534052ff451427c16750b3530634c (diff)
downloadlinux-be580e7522eecfcf31c70abdf6fa0ae77b2e293b.tar.bz2
Merge tag 'mmc-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson: "MMC core: - Continue to re-factor code to prepare for eMMC CMDQ and blkmq support - Introduce queue semantics to prepare for eMMC CMDQ and blkmq support - Add helper functions to manage temporary enable/disable of eMMC CMDQ - Improve wait-busy detection for SDIO MMC host: - cavium: Add driver to support Cavium controllers - cavium: Extend Cavium driver to support Octeon and ThunderX SOCs - bcm2835: Add new driver for Broadcom BCM2835 controller - sdhci-xenon: Add driver to support Marvell Xenon SDHCI controller - sdhci-tegra: Add support for the Tegra186 variant - sdhci-of-esdhc: Support for UHS-I SD cards - sdhci-of-esdhc: Support for eMMC HS200 cards - sdhci-cadence: Add eMMC HS400 enhanced strobe support - sdhci-esdhc-imx: Reset tuning circuit when needed - sdhci-pci: Modernize and clean-up some PM related code - sdhci-pci: Avoid re-tuning at runtime PM for some Intel devices - sdhci-pci|acpi: Use aggressive PM for some Intel BYT controllers - sdhci: Re-factoring and modernizations - sdhci: Optimize delay loops - sdhci: Improve register dump print format - sdhci: Add support for the Command Queue Engine - meson-gx: Various improvements and clean-ups - meson-gx: Add support for CMD23 - meson-gx: Basic tuning support to avoid CRC errors - s3cmci: Enable probing via DT - mediatek: Improve tuning support for eMMC HS200 and HS400 mode - tmio: Improve DMA support - tmio: Use correct response for CMD12 - dw_mmc: Minor improvements and clean-ups" * tag 'mmc-v4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (148 commits) mmc: sdhci-of-esdhc: limit SD clock for ls1012a/ls1046a mmc: sdhci-of-esdhc: poll ESDHC_CLOCK_STABLE bit with udelay mmc: sdhci-xenon: Fix default value of LOGIC_TIMING_ADJUST for eMMC5.0 PHY mmc: sdhci-xenon: Fix the work flow in xenon_remove(). MIPS: Octeon: cavium_octeon_defconfig: Enable Octeon MMC mmc: sdhci-xenon: Remove redundant dev_err call in get_dt_pad_ctrl_data() mmc: cavium: Use module_pci_driver to simplify the code mmc: cavium: Add MMC support for Octeon SOCs. mmc: cavium: Fix detection of block or byte addressing. mmc: core: Export API to allow hosts to get the card address mmc: sdio: Fix sdio wait busy implement limitation mmc: sdhci-esdhc-imx: reset tuning circuit when power on mmc card clk: apn806: fix spelling mistake: "mising" -> "missing" mmc: sdhci-of-esdhc: add delay between tuning cycles mmc: sdhci: Control the delay between tuning commands mmc: sdhci-of-esdhc: add tuning support mmc: sdhci-of-esdhc: add support for signal voltage switch mmc: sdhci-of-esdhc: add peripheral clock support mmc: sdhci-pci: Allow for 3 bytes from Intel DSM mmc: cavium: Fix a shift wrapping bug ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt23
-rw-r--r--Documentation/devicetree/bindings/mmc/cavium-mmc.txt57
-rw-r--r--Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt170
-rw-r--r--Documentation/devicetree/bindings/mmc/mtk-sd.txt12
-rw-r--r--Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt12
-rw-r--r--Documentation/devicetree/bindings/mmc/renesas,mmcif.txt8
-rw-r--r--Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt42
-rw-r--r--Documentation/devicetree/bindings/mmc/sdhci-cadence.txt48
-rw-r--r--Documentation/mmc/mmc-dev-attrs.txt1
9 files changed, 368 insertions, 5 deletions
diff --git a/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt b/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt
new file mode 100644
index 000000000000..d876580ae3b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/brcm,bcm2835-sdhost.txt
@@ -0,0 +1,23 @@
+Broadcom BCM2835 SDHOST controller
+
+This file documents differences between the core properties described
+by mmc.txt and the properties that represent the BCM2835 controller.
+
+Required properties:
+- compatible: Should be "brcm,bcm2835-sdhost".
+- clocks: The clock feeding the SDHOST controller.
+
+Optional properties:
+- dmas: DMA channel for read and write.
+ See Documentation/devicetree/bindings/dma/dma.txt for details
+
+Example:
+
+sdhost: mmc@7e202000 {
+ compatible = "brcm,bcm2835-sdhost";
+ reg = <0x7e202000 0x100>;
+ interrupts = <2 24>;
+ clocks = <&clocks BCM2835_CLOCK_VPU>;
+ dmas = <&dma 13>;
+ dma-names = "rx-tx";
+};
diff --git a/Documentation/devicetree/bindings/mmc/cavium-mmc.txt b/Documentation/devicetree/bindings/mmc/cavium-mmc.txt
new file mode 100644
index 000000000000..1433e6201dff
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/cavium-mmc.txt
@@ -0,0 +1,57 @@
+* Cavium Octeon & ThunderX MMC controller
+
+The highspeed MMC host controller on Caviums SoCs provides an interface
+for MMC and SD types of memory cards.
+
+Supported maximum speeds are the ones of the eMMC standard 4.41 as well
+as the speed of SD standard 4.0. Only 3.3 Volt is supported.
+
+Required properties:
+ - compatible : should be one of:
+ cavium,octeon-6130-mmc
+ cavium,octeon-7890-mmc
+ cavium,thunder-8190-mmc
+ cavium,thunder-8390-mmc
+ mmc-slot
+ - reg : mmc controller base registers
+ - clocks : phandle
+
+Optional properties:
+ - for cd, bus-width and additional generic mmc parameters
+ please refer to mmc.txt within this directory
+ - cavium,cmd-clk-skew : number of coprocessor clocks before sampling command
+ - cavium,dat-clk-skew : number of coprocessor clocks before sampling data
+
+Deprecated properties:
+- spi-max-frequency : use max-frequency instead
+- cavium,bus-max-width : use bus-width instead
+- power-gpios : use vmmc-supply instead
+- cavium,octeon-6130-mmc-slot : use mmc-slot instead
+
+Examples:
+ mmc_1_4: mmc@1,4 {
+ compatible = "cavium,thunder-8390-mmc";
+ reg = <0x0c00 0 0 0 0>; /* DEVFN = 0x0c (1:4) */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&sclk>;
+
+ mmc-slot@0 {
+ compatible = "mmc-slot";
+ reg = <0>;
+ vmmc-supply = <&mmc_supply_3v3>;
+ max-frequency = <42000000>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ };
+
+ mmc-slot@1 {
+ compatible = "mmc-slot";
+ reg = <1>;
+ vmmc-supply = <&mmc_supply_3v3>;
+ max-frequency = <42000000>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ non-removable;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt
new file mode 100644
index 000000000000..b878a1e305af
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt
@@ -0,0 +1,170 @@
+Marvell Xenon SDHCI Controller device tree bindings
+This file documents differences between the core mmc properties
+described by mmc.txt and the properties used by the Xenon implementation.
+
+Multiple SDHCs might be put into a single Xenon IP, to save size and cost.
+Each SDHC is independent and owns independent resources, such as register sets,
+clock and PHY.
+Each SDHC should have an independent device tree node.
+
+Required Properties:
+- compatible: should be one of the following
+ - "marvell,armada-3700-sdhci": For controllers on Armada-3700 SoC.
+ Must provide a second register area and marvell,pad-type.
+ - "marvell,armada-ap806-sdhci": For controllers on Armada AP806.
+ - "marvell,armada-cp110-sdhci": For controllers on Armada CP110.
+
+- clocks:
+ Array of clocks required for SDHC.
+ Require at least input clock for Xenon IP core.
+
+- clock-names:
+ Array of names corresponding to clocks property.
+ The input clock for Xenon IP core should be named as "core".
+
+- reg:
+ * For "marvell,armada-3700-sdhci", two register areas.
+ The first one for Xenon IP register. The second one for the Armada 3700 SoC
+ PHY PAD Voltage Control register.
+ Please follow the examples with compatible "marvell,armada-3700-sdhci"
+ in below.
+ Please also check property marvell,pad-type in below.
+
+ * For other compatible strings, one register area for Xenon IP.
+
+Optional Properties:
+- marvell,xenon-sdhc-id:
+ Indicate the corresponding bit index of current SDHC in
+ SDHC System Operation Control Register Bit[7:0].
+ Set/clear the corresponding bit to enable/disable current SDHC.
+ If Xenon IP contains only one SDHC, this property is optional.
+
+- marvell,xenon-phy-type:
+ Xenon support multiple types of PHYs.
+ To select eMMC 5.1 PHY, set:
+ marvell,xenon-phy-type = "emmc 5.1 phy"
+ eMMC 5.1 PHY is the default choice if this property is not provided.
+ To select eMMC 5.0 PHY, set:
+ marvell,xenon-phy-type = "emmc 5.0 phy"
+
+ All those types of PHYs can support eMMC, SD and SDIO.
+ Please note that this property only presents the type of PHY.
+ It doesn't stand for the entire SDHC type or property.
+ For example, "emmc 5.1 phy" doesn't mean that this Xenon SDHC only
+ supports eMMC 5.1.
+
+- marvell,xenon-phy-znr:
+ Set PHY ZNR value.
+ Only available for eMMC PHY.
+ Valid range = [0:0x1F].
+ ZNR is set as 0xF by default if this property is not provided.
+
+- marvell,xenon-phy-zpr:
+ Set PHY ZPR value.
+ Only available for eMMC PHY.
+ Valid range = [0:0x1F].
+ ZPR is set as 0xF by default if this property is not provided.
+
+- marvell,xenon-phy-nr-success-tun:
+ Set the number of required consecutive successful sampling points
+ used to identify a valid sampling window, in tuning process.
+ Valid range = [1:7].
+ Set as 0x4 by default if this property is not provided.
+
+- marvell,xenon-phy-tun-step-divider:
+ Set the divider for calculating TUN_STEP.
+ Set as 64 by default if this property is not provided.
+
+- marvell,xenon-phy-slow-mode:
+ If this property is selected, transfers will bypass PHY.
+ Only available when bus frequency lower than 55MHz in SDR mode.
+ Disabled by default. Please only try this property if timing issues
+ always occur with PHY enabled in eMMC HS SDR, SD SDR12, SD SDR25,
+ SD Default Speed and HS mode and eMMC legacy speed mode.
+
+- marvell,xenon-tun-count:
+ Xenon SDHC SoC usually doesn't provide re-tuning counter in
+ Capabilities Register 3 Bit[11:8].
+ This property provides the re-tuning counter.
+ If this property is not set, default re-tuning counter will
+ be set as 0x9 in driver.
+
+- marvell,pad-type:
+ Type of Armada 3700 SoC PHY PAD Voltage Controller register.
+ Only valid when "marvell,armada-3700-sdhci" is selected.
+ Two types: "sd" and "fixed-1-8v".
+ If "sd" is selected, SoC PHY PAD is set as 3.3V at the beginning and is
+ switched to 1.8V when later in higher speed mode.
+ If "fixed-1-8v" is selected, SoC PHY PAD is fixed 1.8V, such as for eMMC.
+ Please follow the examples with compatible "marvell,armada-3700-sdhci"
+ in below.
+
+Example:
+- For eMMC:
+
+ sdhci@aa0000 {
+ compatible = "marvell,armada-ap806-sdhci";
+ reg = <0xaa0000 0x1000>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>
+ clocks = <&emmc_clk>;
+ clock-names = "core";
+ bus-width = <4>;
+ marvell,xenon-phy-slow-mode;
+ marvell,xenon-tun-count = <11>;
+ non-removable;
+ no-sd;
+ no-sdio;
+
+ /* Vmmc and Vqmmc are both fixed */
+ };
+
+- For SD/SDIO:
+
+ sdhci@ab0000 {
+ compatible = "marvell,armada-cp110-sdhci";
+ reg = <0xab0000 0x1000>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>
+ vqmmc-supply = <&sd_vqmmc_regulator>;
+ vmmc-supply = <&sd_vmmc_regulator>;
+ clocks = <&sdclk>;
+ clock-names = "core";
+ bus-width = <4>;
+ marvell,xenon-tun-count = <9>;
+ };
+
+- For eMMC with compatible "marvell,armada-3700-sdhci":
+
+ sdhci@aa0000 {
+ compatible = "marvell,armada-3700-sdhci";
+ reg = <0xaa0000 0x1000>,
+ <phy_addr 0x4>;
+ interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>
+ clocks = <&emmcclk>;
+ clock-names = "core";
+ bus-width = <8>;
+ mmc-ddr-1_8v;
+ mmc-hs400-1_8v;
+ non-removable;
+ no-sd;
+ no-sdio;
+
+ /* Vmmc and Vqmmc are both fixed */
+
+ marvell,pad-type = "fixed-1-8v";
+ };
+
+- For SD/SDIO with compatible "marvell,armada-3700-sdhci":
+
+ sdhci@ab0000 {
+ compatible = "marvell,armada-3700-sdhci";
+ reg = <0xab0000 0x1000>,
+ <phy_addr 0x4>;
+ interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>
+ vqmmc-supply = <&sd_regulator>;
+ /* Vmmc is fixed */
+ clocks = <&sdclk>;
+ clock-names = "core";
+ bus-width = <4>;
+
+ marvell,pad-type = "sd";
+ };
diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
index 0120c7f1109c..4182ea36ca5b 100644
--- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
+++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
@@ -21,6 +21,15 @@ Optional properties:
- assigned-clocks: PLL of the source clock
- assigned-clock-parents: parent of source clock, used for HS400 mode to get 400Mhz source clock
- hs400-ds-delay: HS400 DS delay setting
+- mediatek,hs200-cmd-int-delay: HS200 command internal delay setting.
+ This field has total 32 stages.
+ The value is an integer from 0 to 31.
+- mediatek,hs400-cmd-int-delay: HS400 command internal delay setting
+ This field has total 32 stages.
+ The value is an integer from 0 to 31.
+- mediatek,hs400-cmd-resp-sel-rising: HS400 command response sample selection
+ If present,HS400 command responses are sampled on rising edges.
+ If not present,HS400 command responses are sampled on falling edges.
Examples:
mmc0: mmc@11230000 {
@@ -38,4 +47,7 @@ mmc0: mmc@11230000 {
assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>;
assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
hs400-ds-delay = <0x14015>;
+ mediatek,hs200-cmd-int-delay = <26>;
+ mediatek,hs400-cmd-int-delay = <14>;
+ mediatek,hs400-cmd-resp-sel-rising;
};
diff --git a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
index 15b8368ee1f2..9bce57862ed6 100644
--- a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
+++ b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
@@ -7,11 +7,13 @@ This file documents differences between the core properties described
by mmc.txt and the properties used by the sdhci-tegra driver.
Required properties:
-- compatible : For Tegra20, must contain "nvidia,tegra20-sdhci".
- For Tegra30, must contain "nvidia,tegra30-sdhci". For Tegra114,
- must contain "nvidia,tegra114-sdhci". For Tegra124, must contain
- "nvidia,tegra124-sdhci". Otherwise, must contain "nvidia,<chip>-sdhci",
- plus one of the above, where <chip> is tegra132 or tegra210.
+- compatible : should be one of:
+ - "nvidia,tegra20-sdhci": for Tegra20
+ - "nvidia,tegra30-sdhci": for Tegra30
+ - "nvidia,tegra114-sdhci": for Tegra114
+ - "nvidia,tegra124-sdhci": for Tegra124 and Tegra132
+ - "nvidia,tegra210-sdhci": for Tegra210
+ - "nvidia,tegra186-sdhci": for Tegra186
- clocks : Must contain one entry, for the module clock.
See ../clocks/clock-bindings.txt for details.
- resets : Must contain an entry for each entry in reset-names.
diff --git a/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt b/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt
index e4ba92aa035e..c32dc5a9dbe6 100644
--- a/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt
+++ b/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt
@@ -8,6 +8,7 @@ Required properties:
- compatible: should be "renesas,mmcif-<soctype>", "renesas,sh-mmcif" as a
fallback. Examples with <soctype> are:
+ - "renesas,mmcif-r7s72100" for the MMCIF found in r7s72100 SoCs
- "renesas,mmcif-r8a73a4" for the MMCIF found in r8a73a4 SoCs
- "renesas,mmcif-r8a7740" for the MMCIF found in r8a7740 SoCs
- "renesas,mmcif-r8a7778" for the MMCIF found in r8a7778 SoCs
@@ -17,6 +18,13 @@ Required properties:
- "renesas,mmcif-r8a7794" for the MMCIF found in r8a7794 SoCs
- "renesas,mmcif-sh73a0" for the MMCIF found in sh73a0 SoCs
+- interrupts: Some SoCs have only 1 shared interrupt, while others have either
+ 2 or 3 individual interrupts (error, int, card detect). Below is the number
+ of interrupts for each SoC:
+ 1: r8a73a4, r8a7778, r8a7790, r8a7791, r8a7793, r8a7794
+ 2: r8a7740, sh73a0
+ 3: r7s72100
+
- clocks: reference to the functional clock
- dmas: reference to the DMA channels, one per channel name listed in the
diff --git a/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt b/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt
new file mode 100644
index 000000000000..5f68feb9f9d6
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/samsung,s3cmci.txt
@@ -0,0 +1,42 @@
+* Samsung's S3C24XX MMC/SD/SDIO controller device tree bindings
+
+Samsung's S3C24XX MMC/SD/SDIO controller is used as a connectivity interface
+with external MMC, SD and SDIO storage mediums.
+
+This file documents differences between the core mmc properties described by
+mmc.txt and the properties used by the Samsung S3C24XX MMC/SD/SDIO controller
+implementation.
+
+Required SoC Specific Properties:
+- compatible: should be one of the following
+ - "samsung,s3c2410-sdi": for controllers compatible with s3c2410
+ - "samsung,s3c2412-sdi": for controllers compatible with s3c2412
+ - "samsung,s3c2440-sdi": for controllers compatible with s3c2440
+- reg: register location and length
+- interrupts: mmc controller interrupt
+- clocks: Should reference the controller clock
+- clock-names: Should contain "sdi"
+
+Required Board Specific Properties:
+- pinctrl-0: Should specify pin control groups used for this controller.
+- pinctrl-names: Should contain only one value - "default".
+
+Optional Properties:
+- bus-width: number of data lines (see mmc.txt)
+- cd-gpios: gpio for card detection (see mmc.txt)
+- wp-gpios: gpio for write protection (see mmc.txt)
+
+Example:
+
+ mmc0: mmc@5a000000 {
+ compatible = "samsung,s3c2440-sdi";
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdi_pins>;
+ reg = <0x5a000000 0x100000>;
+ interrupts = <0 0 21 3>;
+ clocks = <&clocks PCLK_SDI>;
+ clock-names = "sdi";
+ bus-width = <4>;
+ cd-gpios = <&gpg 8 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gph 8 GPIO_ACTIVE_LOW>;
+ };
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt b/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt
index c0f37cb41a9b..fa423c277853 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci-cadence.txt
@@ -19,6 +19,53 @@ if supported. See mmc.txt for details.
- mmc-hs400-1_8v
- mmc-hs400-1_2v
+Some PHY delays can be configured by following properties.
+PHY DLL input delays:
+They are used to delay the data valid window, and align the window
+to sampling clock. The delay starts from 5ns (for delay parameter equal to 0)
+and it is increased by 2.5ns in each step.
+- cdns,phy-input-delay-sd-highspeed:
+ Value of the delay in the input path for SD high-speed timing
+ Valid range = [0:0x1F].
+- cdns,phy-input-delay-legacy:
+ Value of the delay in the input path for legacy timing
+ Valid range = [0:0x1F].
+- cdns,phy-input-delay-sd-uhs-sdr12:
+ Value of the delay in the input path for SD UHS SDR12 timing
+ Valid range = [0:0x1F].
+- cdns,phy-input-delay-sd-uhs-sdr25:
+ Value of the delay in the input path for SD UHS SDR25 timing
+ Valid range = [0:0x1F].
+- cdns,phy-input-delay-sd-uhs-sdr50:
+ Value of the delay in the input path for SD UHS SDR50 timing
+ Valid range = [0:0x1F].
+- cdns,phy-input-delay-sd-uhs-ddr50:
+ Value of the delay in the input path for SD UHS DDR50 timing
+ Valid range = [0:0x1F].
+- cdns,phy-input-delay-mmc-highspeed:
+ Value of the delay in the input path for MMC high-speed timing
+ Valid range = [0:0x1F].
+- cdns,phy-input-delay-mmc-ddr:
+ Value of the delay in the input path for eMMC high-speed DDR timing
+ Valid range = [0:0x1F].
+
+PHY DLL clock delays:
+Each delay property represents the fraction of the clock period.
+The approximate delay value will be
+(<delay property value>/128)*sdmclk_clock_period.
+- cdns,phy-dll-delay-sdclk:
+ Value of the delay introduced on the sdclk output
+ for all modes except HS200, HS400 and HS400_ES.
+ Valid range = [0:0x7F].
+- cdns,phy-dll-delay-sdclk-hsmmc:
+ Value of the delay introduced on the sdclk output
+ for HS200, HS400 and HS400_ES speed modes.
+ Valid range = [0:0x7F].
+- cdns,phy-dll-delay-strobe:
+ Value of the delay introduced on the dat_strobe input
+ used in HS400 / HS400_ES speed modes.
+ Valid range = [0:0x7F].
+
Example:
emmc: sdhci@5a000000 {
compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc";
@@ -29,4 +76,5 @@ Example:
mmc-ddr-1_8v;
mmc-hs200-1_8v;
mmc-hs400-1_8v;
+ cdns,phy-dll-delay-sdclk = <0>;
};
diff --git a/Documentation/mmc/mmc-dev-attrs.txt b/Documentation/mmc/mmc-dev-attrs.txt
index 2caff30b348c..4ad0bb17f343 100644
--- a/Documentation/mmc/mmc-dev-attrs.txt
+++ b/Documentation/mmc/mmc-dev-attrs.txt
@@ -30,6 +30,7 @@ All attributes are read-only.
rel_sectors Reliable write sector count
ocr Operation Conditions Register
dsr Driver Stage Register
+ cmdq_en Command Queue enabled: 1 => enabled, 0 => not enabled
Note on Erase Size and Preferred Erase Size: