diff options
author | Ondrej Zary <linux@rainbow-software.org> | 2016-09-27 21:00:25 +0200 |
---|---|---|
committer | Martin K. Petersen <martin.petersen@oracle.com> | 2016-09-29 21:52:43 -0400 |
commit | a8cfbcaec0c1214ddebf1b7a39aa0df545fbbf90 (patch) | |
tree | 5d67ae978e64858c3ab6221a65381a69c047aaaf /Documentation | |
parent | d91f5afe595a3c4bdc1b755225024862c2e917f0 (diff) | |
download | linux-a8cfbcaec0c1214ddebf1b7a39aa0df545fbbf90.tar.bz2 |
scsi: g_NCR5380: Stop using scsi_module.c
Convert g_NCR5380 to use scsi_add_host instead of scsi_module.c Use
pnp_driver and isa_driver to manage cards.
In order to support multiple cards, new module parameter format is
introduced. The old parameters are kept for compatibility.
Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Acked-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Diffstat (limited to 'Documentation')
-rw-r--r-- | Documentation/scsi/g_NCR5380.txt | 24 |
1 files changed, 21 insertions, 3 deletions
diff --git a/Documentation/scsi/g_NCR5380.txt b/Documentation/scsi/g_NCR5380.txt index 843cbae88ebb..e2c187947e58 100644 --- a/Documentation/scsi/g_NCR5380.txt +++ b/Documentation/scsi/g_NCR5380.txt @@ -28,6 +28,16 @@ time. More info to come in the future. This driver works as a module. When included as a module, parameters can be passed on the insmod/modprobe command line: + irq=xx[,...] the interrupt(s) + base=xx[,...] the port or base address(es) (for port or memory mapped, resp.) + card=xx[,...] card type(s): + 0 = NCR5380, + 1 = NCR53C400, + 2 = NCR53C400A, + 3 = Domex Technology Corp 3181E (DTC3181E) + 4 = Hewlett Packard C2502 + +These old-style parameters can support only one card: ncr_irq=xx the interrupt ncr_addr=xx the port or base address (for port or memory mapped, resp.) @@ -36,11 +46,19 @@ command line: ncr_53c400a=1 to set up for a NCR53C400A board dtc_3181e=1 to set up for a Domex Technology Corp 3181E board hp_c2502=1 to set up for a Hewlett Packard C2502 board + e.g. -modprobe g_NCR5380 ncr_irq=5 ncr_addr=0x350 ncr_5380=1 +OLD: modprobe g_NCR5380 ncr_irq=5 ncr_addr=0x350 ncr_5380=1 +NEW: modprobe g_NCR5380 irq=5 base=0x350 card=0 for a port mapped NCR5380 board or -modprobe g_NCR5380 ncr_irq=255 ncr_addr=0xc8000 ncr_53c400=1 - for a memory mapped NCR53C400 board with interrupts disabled. + +OLD: modprobe g_NCR5380 ncr_irq=255 ncr_addr=0xc8000 ncr_53c400=1 +NEW: modprobe g_NCR5380 irq=255 base=0xc8000 card=1 + for a memory mapped NCR53C400 board with interrupts disabled or + +NEW: modprobe g_NCR5380 irq=0,7 base=0x240,0x300 card=3,4 + for two cards: DTC3181 (in non-PnP mode) at 0x240 with no IRQ + and HP C2502 at 0x300 with IRQ 7 (255 should be specified for no or DMA interrupt, 254 to autoprobe for an IRQ line if overridden on the command line.) |