summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2018-06-25 15:58:17 +0800
committerLinus Torvalds <torvalds@linux-foundation.org>2018-06-25 15:58:17 +0800
commit6f0d349d922ba44e4348a17a78ea51b7135965b1 (patch)
treede8423e550fcbb3aea7fc34074472c8ec628df48 /Documentation
parent7daf201d7fe8334e2d2364d4e8ed3394ec9af819 (diff)
parent829eb05365ff06e8adc23f2541597d0cc3c18348 (diff)
downloadlinux-6f0d349d922ba44e4348a17a78ea51b7135965b1.tar.bz2
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller: 1) Fix netpoll OOPS in r8169, from Ville Syrjälä. 2) Fix bpf instruction alignment on powerpc et al., from Eric Dumazet. 3) Don't ignore IFLA_MTU attribute when creating new ipvlan links. From Xin Long. 4) Fix use after free in AF_PACKET, from Eric Dumazet. 5) Mis-matched RTNL unlock in xen-netfront, from Ross Lagerwall. 6) Fix VSOCK loopback on big-endian, from Claudio Imbrenda. 7) Missing RX buffer offset correction when computing DMA addresses in mvneta driver, from Antoine Tenart. 8) Fix crashes in DCCP's ccid3_hc_rx_send_feedback, from Eric Dumazet. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (34 commits) sfc: make function efx_rps_hash_bucket static strparser: Corrected typo in documentation. qmi_wwan: add support for the Dell Wireless 5821e module cxgb4: when disabling dcb set txq dcb priority to 0 net_sched: remove a bogus warning in hfsc net: dccp: switch rx_tstamp_last_feedback to monotonic clock net: dccp: avoid crash in ccid3_hc_rx_send_feedback() net: Remove depends on HAS_DMA in case of platform dependency MAINTAINERS: Add file patterns for dsa device tree bindings net: mscc: make sparse happy net: mvneta: fix the Rx desc DMA address in the Rx path Documentation: e1000: Fix docs build error Documentation: e100: Fix docs build error Documentation: e1000: Use correct heading adornment Documentation: e100: Use correct heading adornment ipv6: mcast: fix unsolicited report interval after receiving querys vhost_net: validate sock before trying to put its fd VSOCK: fix loopback on big-endian systems net: ethernet: ti: davinci_cpdma: make function cpdma_desc_pool_create static xen-netfront: Update features after registering netdev ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/networking/e100.rst112
-rw-r--r--Documentation/networking/e1000.rst76
-rw-r--r--Documentation/networking/strparser.txt2
3 files changed, 97 insertions, 93 deletions
diff --git a/Documentation/networking/e100.rst b/Documentation/networking/e100.rst
index d4d837027925..9708f5fa76de 100644
--- a/Documentation/networking/e100.rst
+++ b/Documentation/networking/e100.rst
@@ -1,3 +1,4 @@
+==============================================================
Linux* Base Driver for the Intel(R) PRO/100 Family of Adapters
==============================================================
@@ -86,83 +87,84 @@ Event Log Message Level: The driver uses the message level flag to log events
Additional Configurations
=========================
- Configuring the Driver on Different Distributions
- -------------------------------------------------
+Configuring the Driver on Different Distributions
+-------------------------------------------------
- Configuring a network driver to load properly when the system is started is
- distribution dependent. Typically, the configuration process involves adding
- an alias line to /etc/modprobe.d/*.conf as well as editing other system
- startup scripts and/or configuration files. Many popular Linux
- distributions ship with tools to make these changes for you. To learn the
- proper way to configure a network device for your system, refer to your
- distribution documentation. If during this process you are asked for the
- driver or module name, the name for the Linux Base Driver for the Intel
- PRO/100 Family of Adapters is e100.
+Configuring a network driver to load properly when the system is started
+is distribution dependent. Typically, the configuration process involves
+adding an alias line to /etc/modprobe.d/*.conf as well as editing other
+system startup scripts and/or configuration files. Many popular Linux
+distributions ship with tools to make these changes for you. To learn
+the proper way to configure a network device for your system, refer to
+your distribution documentation. If during this process you are asked
+for the driver or module name, the name for the Linux Base Driver for
+the Intel PRO/100 Family of Adapters is e100.
- As an example, if you install the e100 driver for two PRO/100 adapters
- (eth0 and eth1), add the following to a configuration file in /etc/modprobe.d/
+As an example, if you install the e100 driver for two PRO/100 adapters
+(eth0 and eth1), add the following to a configuration file in
+/etc/modprobe.d/::
alias eth0 e100
alias eth1 e100
- Viewing Link Messages
- ---------------------
- In order to see link messages and other Intel driver information on your
- console, you must set the dmesg level up to six. This can be done by
- entering the following on the command line before loading the e100 driver::
-
- dmesg -n 6
+Viewing Link Messages
+---------------------
- If you wish to see all messages issued by the driver, including debug
- messages, set the dmesg level to eight.
+In order to see link messages and other Intel driver information on your
+console, you must set the dmesg level up to six. This can be done by
+entering the following on the command line before loading the e100
+driver::
- NOTE: This setting is not saved across reboots.
+ dmesg -n 6
+If you wish to see all messages issued by the driver, including debug
+messages, set the dmesg level to eight.
- ethtool
- -------
+NOTE: This setting is not saved across reboots.
- The driver utilizes the ethtool interface for driver configuration and
- diagnostics, as well as displaying statistical information. The ethtool
- version 1.6 or later is required for this functionality.
+ethtool
+-------
- The latest release of ethtool can be found from
- https://www.kernel.org/pub/software/network/ethtool/
+The driver utilizes the ethtool interface for driver configuration and
+diagnostics, as well as displaying statistical information. The ethtool
+version 1.6 or later is required for this functionality.
- Enabling Wake on LAN* (WoL)
- ---------------------------
- WoL is provided through the ethtool* utility. For instructions on enabling
- WoL with ethtool, refer to the ethtool man page.
+The latest release of ethtool can be found from
+https://www.kernel.org/pub/software/network/ethtool/
- WoL will be enabled on the system during the next shut down or reboot. For
- this driver version, in order to enable WoL, the e100 driver must be
- loaded when shutting down or rebooting the system.
+Enabling Wake on LAN* (WoL)
+---------------------------
+WoL is provided through the ethtool* utility. For instructions on
+enabling WoL with ethtool, refer to the ethtool man page. WoL will be
+enabled on the system during the next shut down or reboot. For this
+driver version, in order to enable WoL, the e100 driver must be loaded
+when shutting down or rebooting the system.
- NAPI
- ----
+NAPI
+----
- NAPI (Rx polling mode) is supported in the e100 driver.
+NAPI (Rx polling mode) is supported in the e100 driver.
- See https://wiki.linuxfoundation.org/networking/napi for more information
- on NAPI.
+See https://wiki.linuxfoundation.org/networking/napi for more
+information on NAPI.
- Multiple Interfaces on Same Ethernet Broadcast Network
- ------------------------------------------------------
+Multiple Interfaces on Same Ethernet Broadcast Network
+------------------------------------------------------
- Due to the default ARP behavior on Linux, it is not possible to have
- one system on two IP networks in the same Ethernet broadcast domain
- (non-partitioned switch) behave as expected. All Ethernet interfaces
- will respond to IP traffic for any IP address assigned to the system.
- This results in unbalanced receive traffic.
+Due to the default ARP behavior on Linux, it is not possible to have one
+system on two IP networks in the same Ethernet broadcast domain
+(non-partitioned switch) behave as expected. All Ethernet interfaces
+will respond to IP traffic for any IP address assigned to the system.
+This results in unbalanced receive traffic.
- If you have multiple interfaces in a server, either turn on ARP
- filtering by
+If you have multiple interfaces in a server, either turn on ARP
+filtering by
- (1) entering:: echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter
- (this only works if your kernel's version is higher than 2.4.5), or
+(1) entering:: echo 1 > /proc/sys/net/ipv4/conf/all/arp_filter
+ (this only works if your kernel's version is higher than 2.4.5), or
- (2) installing the interfaces in separate broadcast domains (either
- in different switches or in a switch partitioned to VLANs).
+(2) installing the interfaces in separate broadcast domains (either
+ in different switches or in a switch partitioned to VLANs).
Support
diff --git a/Documentation/networking/e1000.rst b/Documentation/networking/e1000.rst
index 616848940e63..144b87eef153 100644
--- a/Documentation/networking/e1000.rst
+++ b/Documentation/networking/e1000.rst
@@ -1,3 +1,4 @@
+===========================================================
Linux* Base Driver for Intel(R) Ethernet Network Connection
===========================================================
@@ -354,57 +355,58 @@ previously mentioned to force the adapter to the same speed and duplex.
Additional Configurations
=========================
- Jumbo Frames
- ------------
- Jumbo Frames support is enabled by changing the MTU to a value larger than
- the default of 1500. Use the ifconfig command to increase the MTU size.
- For example::
+Jumbo Frames
+------------
+Jumbo Frames support is enabled by changing the MTU to a value larger
+than the default of 1500. Use the ifconfig command to increase the MTU
+size. For example::
ifconfig eth<x> mtu 9000 up
- This setting is not saved across reboots. It can be made permanent if
- you add::
+This setting is not saved across reboots. It can be made permanent if
+you add::
MTU=9000
- to the file /etc/sysconfig/network-scripts/ifcfg-eth<x>. This example
- applies to the Red Hat distributions; other distributions may store this
- setting in a different location.
+to the file /etc/sysconfig/network-scripts/ifcfg-eth<x>. This example
+applies to the Red Hat distributions; other distributions may store this
+setting in a different location.
+
+Notes: Degradation in throughput performance may be observed in some
+Jumbo frames environments. If this is observed, increasing the
+application's socket buffer size and/or increasing the
+/proc/sys/net/ipv4/tcp_*mem entry values may help. See the specific
+application manual and /usr/src/linux*/Documentation/
+networking/ip-sysctl.txt for more details.
- Notes:
- Degradation in throughput performance may be observed in some Jumbo frames
- environments. If this is observed, increasing the application's socket buffer
- size and/or increasing the /proc/sys/net/ipv4/tcp_*mem entry values may help.
- See the specific application manual and /usr/src/linux*/Documentation/
- networking/ip-sysctl.txt for more details.
+- The maximum MTU setting for Jumbo Frames is 16110. This value
+ coincides with the maximum Jumbo Frames size of 16128.
- - The maximum MTU setting for Jumbo Frames is 16110. This value coincides
- with the maximum Jumbo Frames size of 16128.
+- Using Jumbo frames at 10 or 100 Mbps is not supported and may result
+ in poor performance or loss of link.
- - Using Jumbo frames at 10 or 100 Mbps is not supported and may result in
- poor performance or loss of link.
+- Adapters based on the Intel(R) 82542 and 82573V/E controller do not
+ support Jumbo Frames. These correspond to the following product names:
+ Intel(R) PRO/1000 Gigabit Server Adapter Intel(R) PRO/1000 PM Network
+ Connection
- - Adapters based on the Intel(R) 82542 and 82573V/E controller do not
- support Jumbo Frames. These correspond to the following product names:
- Intel(R) PRO/1000 Gigabit Server Adapter
- Intel(R) PRO/1000 PM Network Connection
+ethtool
+-------
+The driver utilizes the ethtool interface for driver configuration and
+diagnostics, as well as displaying statistical information. The ethtool
+version 1.6 or later is required for this functionality.
- ethtool
- -------
- The driver utilizes the ethtool interface for driver configuration and
- diagnostics, as well as displaying statistical information. The ethtool
- version 1.6 or later is required for this functionality.
+The latest release of ethtool can be found from
+https://www.kernel.org/pub/software/network/ethtool/
- The latest release of ethtool can be found from
- https://www.kernel.org/pub/software/network/ethtool/
+Enabling Wake on LAN* (WoL)
+---------------------------
+WoL is configured through the ethtool* utility.
- Enabling Wake on LAN* (WoL)
- ---------------------------
- WoL is configured through the ethtool* utility.
+WoL will be enabled on the system during the next shut down or reboot.
+For this driver version, in order to enable WoL, the e1000 driver must be
+loaded when shutting down or rebooting the system.
- WoL will be enabled on the system during the next shut down or reboot.
- For this driver version, in order to enable WoL, the e1000 driver must be
- loaded when shutting down or rebooting the system.
Support
=======
diff --git a/Documentation/networking/strparser.txt b/Documentation/networking/strparser.txt
index 13081b3decef..a7d354ddda7b 100644
--- a/Documentation/networking/strparser.txt
+++ b/Documentation/networking/strparser.txt
@@ -48,7 +48,7 @@ void strp_pause(struct strparser *strp)
Temporarily pause a stream parser. Message parsing is suspended
and no new messages are delivered to the upper layer.
-void strp_pause(struct strparser *strp)
+void strp_unpause(struct strparser *strp)
Unpause a paused stream parser.