Merge tag 'pinctrl-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes for the v4.12 cycle.

  The extra week before the merge window actually resulted in some of
  the type of fixes that usually arrive after the merge window already
  starting to trickle in from eager developers using -next, I'm
  impressed.

  I have recruited a Samsung subsubsystem maintainer (Krzysztof) to deal
  with the onset of Samsung patches. It works great.

  Apart from that it is a boring round, just incremental updates and
  fixes all over the place, no serious core changes or anything exciting
  like that. The most pleasing to see is Julia Cartwrights work to audit
  the irqchip-providing drivers for realtime locking compliance. It's
  one of those "I should really get around to looking into that" things
  that have been on my TODO list since forever.

  Summary:

  Core changes:

   - add bi-directional and output-enable pin configurations to the
     generic bindings and generic pin controlling core.

  New drivers or subdrivers:

   - Armada 37xx SoC pin controller and GPIO support.

   - Axis ARTPEC-6 SoC pin controller support.

   - AllWinner A64 R_PIO controller support, and opening up the
     AllWinner sunxi driver for ARM64 use.

   - Rockchip RK3328 support.

   - Renesas R-Car H3 ES2.0 support.

   - STM32F469 support in the STM32 driver.

   - Aspeed G4 and G5 pin controller support.

  Improvements:

   - a whole slew of realtime improvements to drivers implementing
     irqchips: BCM, AMD, SiRF, sunxi, rockchip.

   - switch meson driver to get the GPIO ranges from the device tree.

   - input schmitt trigger support on the Rockchip driver.

   - enable the sunxi (AllWinner) driver to also be used on ARM64
     silicon.

   - name the Qualcomm QDF2xxx GPIO lines.

   - support GMMR GPIO regions on the Intel Cherryview. This fixes a
     serialization problem on these platforms.

   - pad retention support for the Samsung Exynos 5433.

   - handle suspend-to-ram in the AT91-pio4 driver.

   - pin configuration support in the Aspeed driver.

  Cleanups:

   - the final name of Rockchip RK1108 was RV1108 so rename the driver
     and variables to stay consistent"

* tag 'pinctrl-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (80 commits)
  pinctrl: mediatek: Add missing pinctrl bindings for mt7623
  pinctrl: artpec6: Fix return value check in artpec6_pmx_probe()
  pinctrl: artpec6: Remove .owner field for driver
  pinctrl: tegra: xusb: Silence sparse warnings
  ARM: at91/at91-pinctrl documentation: fix spelling mistake: "contoller" -> "controller"
  pinctrl: make artpec6 explicitly non-modular
  pinctrl: aspeed: g5: Add pinconf support
  pinctrl: aspeed: g4: Add pinconf support
  pinctrl: aspeed: Add core pinconf support
  pinctrl: aspeed: Document pinconf in devicetree bindings
  pinctrl: Add st,stm32f469-pinctrl compatible to stm32-pinctrl
  pinctrl: stm32: Add STM32F469 MCU support
  Documentation: dt: Remove ngpios from stm32-pinctrl binding
  pinctrl: stm32: replace device_initcall() with arch_initcall()
  pinctrl: stm32: add possibility to use gpio-ranges to declare bank range
  pinctrl: armada-37xx: Add gpio support
  pinctrl: armada-37xx: Add pin controller support for Armada 37xx
  pinctrl: dt-bindings: Add documentation for Armada 37xx pin controllers
  pinctrl: core: Make pinctrl_init_controller() static
  pinctrl: generic: Add bi-directional and output-enable
  ...

9 files changed, 362 insertions, 26 deletions

diff --git a/Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt b/Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt
index a88f1f05fbd6..4c0807f28cfa 100644
--- a/Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt
+++ b/Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt
@@ -5,6 +5,7 @@ reading the gpio latch register.
 
 This node must be a subnode of the node exposing the register address
 of the GPIO block where the gpio latch is located.
+See Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
 
 Required properties:
 - compatible : shall be one of the following:
@@ -16,9 +17,9 @@ Optional properties:
 	output names ("xtal")
 
 Example:
-gpio1: gpio@13800 {
-	compatible = "marvell,armada-3700-gpio", "syscon", "simple-mfd";
-	reg = <0x13800 0x1000>;
+pinctrl_nb: pinctrl-nb@13800 {
+	compatible = "armada3710-nb-pinctrl", "syscon", "simple-mfd";
+	reg = <0x13800 0x100>, <0x13C00 0x20>;
 
 	xtalclk: xtal-clk {
 		compatible = "marvell,armada-3700-xtal-clock";
diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
index 2fd688c8dbdb..b53224473672 100644
--- a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt
@@ -23,7 +23,8 @@ Required properties:
   "allwinner,sun8i-h3-pinctrl"
   "allwinner,sun8i-h3-r-pinctrl"
   "allwinner,sun50i-a64-pinctrl"
-  "allwinner,sun50i-h5-r-pinctrl"
+  "allwinner,sun50i-a64-r-pinctrl"
+  "allwinner,sun50i-h5-pinctrl"
   "nextthing,gr8-pinctrl"
 
 - reg: Should contain the register physical address and length for the
diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
index 9a8a45d9d8ab..590e60378be3 100644
--- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt
@@ -4,7 +4,7 @@ The AT91 Pinmux Controller, enables the IC
 to share one PAD to several functional blocks. The sharing is done by
 multiplexing the PAD input/output signals. For each PAD there are up to
 8 muxing options (called periph modes). Since different modules require
-different PAD settings (like pull up, keeper, etc) the contoller controls
+different PAD settings (like pull up, keeper, etc) the controller controls
 also the PAD settings parameters.
 
 Please refer to pinctrl-bindings.txt in this directory for details of the
diff --git a/Documentation/devicetree/bindings/pinctrl/axis,artpec6-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/axis,artpec6-pinctrl.txt
new file mode 100644
index 000000000000..47284f85ec80
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/axis,artpec6-pinctrl.txt
@@ -0,0 +1,85 @@
+Axis ARTPEC-6 Pin Controller
+
+Required properties:
+- compatible: "axis,artpec6-pinctrl".
+- reg: Should contain the register physical address and length for the pin
+       controller.
+
+A pinctrl node should contain at least one subnode representing the pinctrl
+groups available on the machine. Each subnode will list the mux function
+required and what pin group it will use. Each subnode will also configure the
+drive strength and bias pullup of the pin group. If either of these options is
+not set, its actual value will be unspecified.
+
+
+Required subnode-properties:
+- function: Function to mux.
+- groups: Name of the pin group to use for the function above.
+
+	Available functions and groups (function: group0, group1...):
+		gpio: cpuclkoutgrp0, udlclkoutgrp0, i2c1grp0, i2c2grp0,
+		      i2c3grp0, i2s0grp0, i2s1grp0, i2srefclkgrp0, spi0grp0,
+		      spi1grp0, pciedebuggrp0, uart0grp0, uart0grp1, uart1grp0,
+		      uart2grp0, uart2grp1, uart3grp0, uart4grp0, uart5grp0
+		cpuclkout: cpuclkoutgrp0
+		udlclkout: udlclkoutgrp0
+		i2c1: i2c1grp0
+		i2c2: i2c2grp0
+		i2c3: i2c3grp0
+		i2s0: i2s0grp0
+		i2s1: i2s1grp0
+		i2srefclk: i2srefclkgrp0
+		spi0: spi0grp0
+		spi1: spi1grp0
+		pciedebug: pciedebuggrp0
+		uart0: uart0grp0, uart0grp1
+		uart1: uart1grp0
+		uart2: uart2grp0, uart2grp1
+		uart3: uart3grp0
+		uart4: uart4grp0
+		uart5: uart5grp0
+		nand: nandgrp0
+		sdio0: sdio0grp0
+		sdio1: sdio1grp0
+		ethernet: ethernetgrp0
+
+
+Optional subnode-properties (see pinctrl-bindings.txt):
+- drive-strength: 4, 6, 8, 9 mA.  For SD and NAND pins, this is for 3.3V VCCQ3.
+- bias-pull-up
+- bias-disable
+
+Examples:
+pinctrl@f801d000 {
+	compatible = "axis,artpec6-pinctrl";
+	reg = <0xf801d000 0x400>;
+
+	pinctrl_uart0: uart0grp {
+		function = "uart0";
+		groups = "uart0grp0";
+		drive-strength = <4>;
+		bias-pull-up;
+	};
+	pinctrl_uart3: uart3grp {
+		function = "uart3";
+		groups = "uart3grp0";
+	};
+};
+uart0: uart@f8036000 {
+	compatible = "arm,pl011", "arm,primecell";
+	reg = <0xf8036000 0x1000>;
+	interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&pll2div24>, <&apb_pclk>;
+	clock-names = "uart_clk", "apb_pclk";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
+};
+uart3: uart@f8039000 {
+	compatible = "arm,pl011", "arm,primecell";
+	reg = <0xf8039000 0x1000>;
+	interrupts = <0 128 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&pll2div24>, <&apb_pclk>;
+	clock-names = "uart_clk", "apb_pclk";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
new file mode 100644
index 000000000000..f64060908d5a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt
@@ -0,0 +1,183 @@
+* Marvell Armada 37xx SoC pin and gpio controller
+
+Each Armada 37xx SoC come with two pin and gpio controller one for the
+south bridge and the other for the north bridge.
+
+Inside this set of register the gpio latch allows exposing some
+configuration of the SoC and especially the clock frequency of the
+xtal. Hence, this node is a represent as syscon allowing sharing the
+register between multiple hardware block.
+
+GPIO and pin controller:
+------------------------
+
+Main node:
+
+Refer to pinctrl-bindings.txt in this directory for details of the
+common pinctrl bindings used by client devices, including the meaning
+of the phrase "pin configuration node".
+
+Required properties for pinctrl driver:
+
+- compatible:	"marvell,armada3710-sb-pinctrl", "syscon, "simple-mfd"
+		for the south bridge
+		"marvell,armada3710-nb-pinctrl", "syscon, "simple-mfd"
+		for the north bridge
+- reg: The first set of register are for pinctrl/gpio and the second
+  set for the interrupt controller
+- interrupts: list of the interrupt use by the gpio
+
+Available groups and functions for the North bridge:
+
+group: jtag
+ - pins 20-24
+ - functions jtag, gpio
+
+group sdio0
+ - pins 8-10
+ - functions sdio, gpio
+
+group emmc_nb
+ - pins 27-35
+ - functions emmc, gpio
+
+group pwm0
+ - pin 11 (GPIO1-11)
+ - functions pwm, gpio
+
+group pwm1
+ - pin 12
+ - functions pwm, gpio
+
+group pwm2
+ - pin 13
+ - functions pwm, gpio
+
+group pwm3
+ - pin 14
+ - functions pwm, gpio
+
+group pmic1
+ - pin 17
+ - functions pmic, gpio
+
+group pmic0
+ - pin 16
+ - functions pmic, gpio
+
+group i2c2
+ - pins 2-3
+ - functions i2c, gpio
+
+group i2c1
+ - pins 0-1
+ - functions i2c, gpio
+
+group spi_cs1
+ - pin 17
+ - functions spi, gpio
+
+group spi_cs2
+ - pin 18
+ - functions spi, gpio
+
+group spi_cs3
+ - pin 19
+ - functions spi, gpio
+
+group onewire
+ - pin 4
+ - functions onewire, gpio
+
+group uart1
+ - pins 25-26
+ - functions uart, gpio
+
+group spi_quad
+ - pins 15-16
+ - functions spi, gpio
+
+group uart_2
+ - pins 9-10
+ - functions uart, gpio
+
+Available groups and functions for the South bridge:
+
+group usb32_drvvbus0
+ - pin 36
+ - functions drvbus, gpio
+
+group usb2_drvvbus1
+ - pin 37
+ - functions drvbus, gpio
+
+group sdio_sb
+ - pins 60-64
+ - functions sdio, gpio
+
+group rgmii
+ - pins 42-55
+ - functions mii, gpio
+
+group pcie1
+ - pins 39-40
+ - functions pcie, gpio
+
+group ptp
+ - pins 56-58
+ - functions ptp, gpio
+
+group ptp_clk
+ - pin 57
+ - functions ptp, mii
+
+group ptp_trig
+ - pin 58
+ - functions ptp, mii
+
+group mii_col
+ - pin 59
+ - functions mii, mii_err
+
+GPIO subnode:
+
+Please refer to gpio.txt in this directory for details of gpio-ranges property
+and the common GPIO bindings used by client devices.
+
+Required properties for gpio driver under the gpio subnode:
+- interrupts: List of interrupt specifier for the controllers interrupt.
+- gpio-controller: Marks the device node as a gpio controller.
+- #gpio-cells: Should be 2. The first cell is the GPIO number and the
+   second cell specifies GPIO flags, as defined in
+   <dt-bindings/gpio/gpio.h>. Only the GPIO_ACTIVE_HIGH and
+   GPIO_ACTIVE_LOW flags are supported.
+- gpio-ranges: Range of pins managed by the GPIO controller.
+
+Xtal Clock bindings for Marvell Armada 37xx SoCs
+------------------------------------------------
+
+see Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt
+
+
+Example:
+pinctrl_sb: pinctrl-sb@18800 {
+	compatible = "marvell,armada3710-sb-pinctrl", "syscon", "simple-mfd";
+	reg = <0x18800 0x100>, <0x18C00 0x20>;
+	gpio {
+		#gpio-cells = <2>;
+		gpio-ranges = <&pinctrl_sb 0 0 29>;
+		gpio-controller;
+		interrupts =
+		<GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+		<GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	rgmii_pins: mii-pins {
+		groups = "rgmii";
+		function = "mii";
+	};
+
+};
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
index b98e6f030da8..ca01710ee29a 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-aspeed.txt
@@ -34,13 +34,28 @@ Documentation/devicetree/bindings/mfd/syscon.txt
 Subnode Format
 ==============
 
-The required properties of child nodes are (as defined in pinctrl-bindings):
-- function
-- groups
+The required properties of pinmux child nodes are:
+- function: the mux function to select
+- groups  : the list of groups to select with this function
 
-Each function has only one associated pin group. Each group is named by its
-function. The following values for the function and groups properties are
-supported:
+Required properties of pinconf child nodes are:
+- groups: A list of groups to select (either this or "pins" must be
+          specified)
+- pins  : A list of ball names as strings, eg "D14" (either this or "groups"
+          must be specified)
+
+Optional properties of pinconf child nodes are:
+- bias-disable  : disable any pin bias
+- bias-pull-down: pull down the pin
+- drive-strength: sink or source at most X mA
+
+Definitions are as specified in
+Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt, with any
+further limitations as described above.
+
+For pinmux, each mux function has only one associated pin group. Each group is
+named by its function. The following values for the function and groups
+properties are supported:
 
 aspeed,ast2400-pinctrl, aspeed,g4-pinctrl:
 
@@ -90,6 +105,11 @@ syscon: scu@1e6e2000 {
 			function = "I2C3";
 			groups = "I2C3";
 		};
+
+		pinctrl_gpioh0_unbiased_default: gpioh0 {
+			pins = "A8";
+			bias-disable;
+		};
 	};
 };
 
@@ -110,6 +130,11 @@ ahb {
 					function = "I2C3";
 					groups = "I2C3";
 				};
+
+				pinctrl_gpioh0_unbiased_default: gpioh0 {
+					pins = "A18";
+					bias-disable;
+				};
 			};
 		};
 
@@ -143,6 +168,3 @@ ahb {
 		};
 	};
 };
-
-Please refer to pinctrl-bindings.txt in this directory for details of the
-common pinctrl bindings used by client devices.
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
index bf3f7b014724..71a3c134af1b 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
@@ -162,8 +162,8 @@ state_2_node_a {
 	pins = "mfio29", "mfio30";
 };
 
-Optionally an altenative binding can be used if more suitable depending on the
-pin controller hardware. For hardaware where there is a large number of identical
+Optionally an alternative binding can be used if more suitable depending on the
+pin controller hardware. For hardware where there is a large number of identical
 pin controller instances, naming each pin and function can easily become
 unmaintainable. This is especially the case if the same controller is used for
 different pins and functions depending on the SoC revision and packaging.
@@ -198,6 +198,28 @@ registers, and must not be a virtual index of pin instances. The reason for
 this is to avoid mapping of the index in the dts files and the pin controller
 driver as it can change.
 
+For hardware where pin multiplexing configurations have to be specified for
+each single pin the number of required sub-nodes containing "pin" and
+"function" properties can quickly escalate and become hard to write and
+maintain.
+
+For cases like this, the pin controller driver may use the pinmux helper
+property, where the pin identifier is packed with mux configuration settings
+in a single integer.
+
+The pinmux property accepts an array of integers, each of them describing
+a single pin multiplexing configuration.
+
+pincontroller {
+	state_0_node_a {
+		pinmux = <PIN_ID_AND_MUX>, <PIN_ID_AND_MUX>, ...;
+	};
+};
+
+Each individual pin controller driver bindings documentation shall specify
+how those values (pin IDs and pin multiplexing configuration) are defined and
+assembled together.
+
 == Generic pin configuration node content ==
 
 Many data items that are represented in a pin configuration node are common
@@ -210,18 +232,22 @@ structure of the DT nodes that contain these properties.
 Supported generic properties are:
 
 pins			- the list of pins that properties in the node
-			  apply to (either this or "group" has to be
+			  apply to (either this, "group" or "pinmux" has to be
 			  specified)
 group			- the group to apply the properties to, if the driver
 			  supports configuration of whole groups rather than
-			  individual pins (either this or "pins" has to be
-			  specified)
+			  individual pins (either this, "pins" or "pinmux" has
+			  to be specified)
+pinmux			- the list of numeric pin ids and their mux settings
+			  that properties in the node apply to (either this,
+			  "pins" or "groups" have to be specified)
 bias-disable		- disable any pin bias
 bias-high-impedance	- high impedance mode ("third-state", "floating")
 bias-bus-hold		- latch weakly
 bias-pull-up		- pull up the pin
 bias-pull-down		- pull down the pin
 bias-pull-pin-default	- use pin-default pull state
+bi-directional		- pin supports simultaneous input/output operations
 drive-push-pull		- drive actively high and low
 drive-open-drain	- drive with open drain
 drive-open-source	- drive with open source
@@ -234,6 +260,7 @@ input-debounce		- debounce mode with debound time X
 power-source		- select between different power supplies
 low-power-enable	- enable low power mode
 low-power-disable	- disable low power mode
+output-enable		- enable output on pin regardless of output value
 output-low		- set the pin to output mode with low level
 output-high		- set the pin to output mode with high level
 slew-rate		- set the slew rate
@@ -258,6 +285,12 @@ state_2_node_a {
 		bias-pull-up;
 	};
 };
+state_3_node_a {
+	mux {
+		pinmux = <GPIOx_PINm_MUXn>, <GPIOx_PINj_MUXk)>;
+		input-enable;
+	};
+};
 
 Some of the generic properties take arguments. For those that do, the
 arguments are described below.
@@ -266,6 +299,11 @@ arguments are described below.
   binding for the hardware defines:
   - Whether the entries are integers or strings, and their meaning.
 
+- pinmux takes a list of pin IDs and mux settings as required argument. The
+  specific bindings for the hardware defines:
+  - How pin IDs and mux settings are defined and assembled together in a single
+    integer.
+
 - bias-pull-up, -down and -pin-default take as optional argument on hardware
   supporting it the pull strength in Ohm. bias-disable will disable the pull.
 
diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt
index 4722bc61a1a2..ee01ab58224d 100644
--- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt
@@ -19,11 +19,18 @@ The pins are grouped into up to 5 individual pin banks which need to be
 defined as gpio sub-nodes of the pinmux controller.
 
 Required properties for iomux controller:
-  - compatible: one of "rockchip,rk1108-pinctrl", "rockchip,rk2928-pinctrl"
-		       "rockchip,rk3066a-pinctrl", "rockchip,rk3066b-pinctrl"
-		       "rockchip,rk3188-pinctrl", "rockchip,rk3228-pinctrl"
-		       "rockchip,rk3288-pinctrl", "rockchip,rk3368-pinctrl"
-		       "rockchip,rk3399-pinctrl"
+  - compatible: should be
+		"rockchip,rv1108-pinctrl":  for Rockchip RV1108
+		"rockchip,rk2928-pinctrl":  for Rockchip RK2928
+		"rockchip,rk3066a-pinctrl": for Rockchip RK3066a
+		"rockchip,rk3066b-pinctrl": for Rockchip RK3066b
+		"rockchip,rk3188-pinctrl":  for Rockchip RK3188
+		"rockchip,rk3228-pinctrl":  for Rockchip RK3228
+		"rockchip,rk3288-pinctrl":  for Rockchip RK3288
+		"rockchip,rk3328-pinctrl":  for Rockchip RK3328
+		"rockchip,rk3368-pinctrl":  for Rockchip RK3368
+		"rockchip,rk3399-pinctrl":  for Rockchip RK3399
+
   - rockchip,grf: phandle referencing a syscon providing the
 	 "general register files"
 
diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
index eac20aa33907..d907a74f8dc0 100644
--- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
@@ -9,6 +9,7 @@ Pin controller node:
 Required properies:
  - compatible: value should be one of the following:
    "st,stm32f429-pinctrl"
+   "st,stm32f469-pinctrl"
    "st,stm32f746-pinctrl"
    "st,stm32h743-pinctrl"
  - #address-cells: The value of this property must be 1
@@ -38,8 +39,6 @@ Optional properties:
  - st,syscfg: Should be phandle/offset pair. The phandle to the syscon node
    which includes IRQ mux selection register, and the offset of the IRQ mux
    selection register.
- - ngpios: Number of gpios in a bank (to use if bank gpio numbers is less
-   than 16).
  - gpio-ranges: Define a dedicated mapping between a pin-controller and
    a gpio controller. Format is <&phandle a b c> with:
 	-(phandle): phandle of pin-controller.