summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2018-08-16 09:21:54 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2018-08-16 09:21:54 -0700
commit4e31843f681c34f7185e7d169fe627c9d891ce2c (patch)
tree7717ffdea5621cb68edb746bb21f6acd32f49aa9 /Documentation
parentf91e654474d413201ae578820fb63f8a811f6c4e (diff)
parentfa687fb9ced47b97bd22297366e788dac1927dd7 (diff)
downloadlinux-4e31843f681c34f7185e7d169fe627c9d891ce2c.tar.bz2
Merge tag 'pci-v4.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci updates from Bjorn Helgaas: - Decode AER errors with names similar to "lspci" (Tyler Baicar) - Expose AER statistics in sysfs (Rajat Jain) - Clear AER status bits selectively based on the type of recovery (Oza Pawandeep) - Honor "pcie_ports=native" even if HEST sets FIRMWARE_FIRST (Alexandru Gagniuc) - Don't clear AER status bits if we're using the "Firmware-First" strategy where firmware owns the registers (Alexandru Gagniuc) - Use sysfs_match_string() to simplify ASPM sysfs parsing (Andy Shevchenko) - Remove unnecessary includes of <linux/pci-aspm.h> (Bjorn Helgaas) - Defer DPC event handling to work queue (Keith Busch) - Use threaded IRQ for DPC bottom half (Keith Busch) - Print AER status while handling DPC events (Keith Busch) - Work around IDT switch ACS Source Validation erratum (James Puthukattukaran) - Emit diagnostics for all cases of PCIe Link downtraining (Links operating slower than they're capable of) (Alexandru Gagniuc) - Skip VFs when configuring Max Payload Size (Myron Stowe) - Reduce Root Port Max Payload Size if necessary when hot-adding a device below it (Myron Stowe) - Simplify SHPC existence/permission checks (Bjorn Helgaas) - Remove hotplug sample skeleton driver (Lukas Wunner) - Convert pciehp to threaded IRQ handling (Lukas Wunner) - Improve pciehp tolerance of missed events and initially unstable links (Lukas Wunner) - Clear spurious pciehp events on resume (Lukas Wunner) - Add pciehp runtime PM support, including for Thunderbolt controllers (Lukas Wunner) - Support interrupts from pciehp bridges in D3hot (Lukas Wunner) - Mark fall-through switch cases before enabling -Wimplicit-fallthrough (Gustavo A. R. Silva) - Move DMA-debug PCI init from arch code to PCI core (Christoph Hellwig) - Fix pci_request_irq() usage of IRQF_ONESHOT when no handler is supplied (Heiner Kallweit) - Unify PCI and DMA direction #defines (Shunyong Yang) - Add PCI_DEVICE_DATA() macro (Andy Shevchenko) - Check for VPD completion before checking for timeout (Bert Kenward) - Limit Netronome NFP5000 config space size to work around erratum (Jakub Kicinski) - Set IRQCHIP_ONESHOT_SAFE for PCI MSI irqchips (Heiner Kallweit) - Document ACPI description of PCI host bridges (Bjorn Helgaas) - Add "pci=disable_acs_redir=" parameter to disable ACS redirection for peer-to-peer DMA support (we don't have the peer-to-peer support yet; this is just one piece) (Logan Gunthorpe) - Clean up devm_of_pci_get_host_bridge_resources() resource allocation (Jan Kiszka) - Fixup resizable BARs after suspend/resume (Christian König) - Make "pci=earlydump" generic (Sinan Kaya) - Fix ROM BAR access routines to stay in bounds and check for signature correctly (Rex Zhu) - Add DMA alias quirk for Microsemi Switchtec NTB (Doug Meyer) - Expand documentation for pci_add_dma_alias() (Logan Gunthorpe) - To avoid bus errors, enable PASID only if entire path supports End-End TLP prefixes (Sinan Kaya) - Unify slot and bus reset functions and remove hotplug knowledge from callers (Sinan Kaya) - Add Function-Level Reset quirks for Intel and Samsung NVMe devices to fix guest reboot issues (Alex Williamson) - Add function 1 DMA alias quirk for Marvell 88SS9183 PCIe SSD Controller (Bjorn Helgaas) - Remove Xilinx AXI-PCIe host bridge arch dependency (Palmer Dabbelt) - Remove Aardvark outbound window configuration (Evan Wang) - Fix Aardvark bridge window sizing issue (Zachary Zhang) - Convert Aardvark to use pci_host_probe() to reduce code duplication (Thomas Petazzoni) - Correct the Cadence cdns_pcie_writel() signature (Alan Douglas) - Add Cadence support for optional generic PHYs (Alan Douglas) - Add Cadence power management ops (Alan Douglas) - Remove redundant variable from Cadence driver (Colin Ian King) - Add Kirin MSI support (Xiaowei Song) - Drop unnecessary root_bus_nr setting from exynos, imx6, keystone, armada8k, artpec6, designware-plat, histb, qcom, spear13xx (Shawn Guo) - Move link notification settings from DesignWare core to individual drivers (Gustavo Pimentel) - Add endpoint library MSI-X interfaces (Gustavo Pimentel) - Correct signature of endpoint library IRQ interfaces (Gustavo Pimentel) - Add DesignWare endpoint library MSI-X callbacks (Gustavo Pimentel) - Add endpoint library MSI-X test support (Gustavo Pimentel) - Remove unnecessary GFP_ATOMIC from Hyper-V "new child" allocation (Jia-Ju Bai) - Add more devices to Broadcom PAXC quirk (Ray Jui) - Work around corrupted Broadcom PAXC config space to enable SMMU and GICv3 ITS (Ray Jui) - Disable MSI parsing to work around broken Broadcom PAXC logic in some devices (Ray Jui) - Hide unconfigured functions to work around a Broadcom PAXC defect (Ray Jui) - Lower iproc log level to reduce console output during boot (Ray Jui) - Fix mobiveil iomem/phys_addr_t type usage (Lorenzo Pieralisi) - Fix mobiveil missing include file (Lorenzo Pieralisi) - Add mobiveil Kconfig/Makefile support (Lorenzo Pieralisi) - Fix mvebu I/O space remapping issues (Thomas Petazzoni) - Use generic pci_host_bridge in mvebu instead of ARM-specific API (Thomas Petazzoni) - Whitelist VMD devices with fast interrupt handlers to avoid sharing vectors with slow handlers (Keith Busch) * tag 'pci-v4.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (153 commits) PCI/AER: Don't clear AER bits if error handling is Firmware-First PCI: Limit config space size for Netronome NFP5000 PCI/MSI: Set IRQCHIP_ONESHOT_SAFE for PCI-MSI irqchips PCI/VPD: Check for VPD access completion before checking for timeout PCI: Add PCI_DEVICE_DATA() macro to fully describe device ID entry PCI: Match Root Port's MPS to endpoint's MPSS as necessary PCI: Skip MPS logic for Virtual Functions (VFs) PCI: Add function 1 DMA alias quirk for Marvell 88SS9183 PCI: Check for PCIe Link downtraining PCI: Add ACS Redirect disable quirk for Intel Sunrise Point PCI: Add device-specific ACS Redirect disable infrastructure PCI: Convert device-specific ACS quirks from NULL termination to ARRAY_SIZE PCI: Add "pci=disable_acs_redir=" parameter for peer-to-peer support PCI: Allow specifying devices using a base bus and path of devfns PCI: Make specifying PCI devices in kernel parameters reusable PCI: Hide ACS quirk declarations inside PCI core PCI: Delay after FLR of Intel DC P3700 NVMe PCI: Disable Samsung SM961/PM961 NVMe before FLR PCI: Export pcie_has_flr() PCI: mvebu: Drop bogus comment above mvebu_pcie_map_registers() ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats122
-rw-r--r--Documentation/PCI/00-INDEX2
-rw-r--r--Documentation/PCI/acpi-info.txt187
-rw-r--r--Documentation/PCI/endpoint/function/binding/pci-test.txt2
-rw-r--r--Documentation/PCI/endpoint/pci-endpoint.txt4
-rw-r--r--Documentation/PCI/endpoint/pci-test-function.txt29
-rw-r--r--Documentation/PCI/endpoint/pci-test-howto.txt30
-rw-r--r--Documentation/PCI/pcieaer-howto.txt5
-rw-r--r--Documentation/admin-guide/kernel-parameters.txt43
-rw-r--r--Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.txt5
-rw-r--r--Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt6
-rw-r--r--Documentation/ioctl/ioctl-number.txt1
-rw-r--r--Documentation/misc-devices/pci-endpoint-test.txt6
13 files changed, 427 insertions, 15 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats b/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats
new file mode 100644
index 000000000000..4b0318c99507
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats
@@ -0,0 +1,122 @@
+==========================
+PCIe Device AER statistics
+==========================
+These attributes show up under all the devices that are AER capable. These
+statistical counters indicate the errors "as seen/reported by the device".
+Note that this may mean that if an endpoint is causing problems, the AER
+counters may increment at its link partner (e.g. root port) because the
+errors may be "seen" / reported by the link partner and not the
+problematic endpoint itself (which may report all counters as 0 as it never
+saw any problems).
+
+Where: /sys/bus/pci/devices/<dev>/aer_dev_correctable
+Date: July 2018
+Kernel Version: 4.19.0
+Contact: linux-pci@vger.kernel.org, rajatja@google.com
+Description: List of correctable errors seen and reported by this
+ PCI device using ERR_COR. Note that since multiple errors may
+ be reported using a single ERR_COR message, thus
+ TOTAL_ERR_COR at the end of the file may not match the actual
+ total of all the errors in the file. Sample output:
+-------------------------------------------------------------------------
+localhost /sys/devices/pci0000:00/0000:00:1c.0 # cat aer_dev_correctable
+Receiver Error 2
+Bad TLP 0
+Bad DLLP 0
+RELAY_NUM Rollover 0
+Replay Timer Timeout 0
+Advisory Non-Fatal 0
+Corrected Internal Error 0
+Header Log Overflow 0
+TOTAL_ERR_COR 2
+-------------------------------------------------------------------------
+
+Where: /sys/bus/pci/devices/<dev>/aer_dev_fatal
+Date: July 2018
+Kernel Version: 4.19.0
+Contact: linux-pci@vger.kernel.org, rajatja@google.com
+Description: List of uncorrectable fatal errors seen and reported by this
+ PCI device using ERR_FATAL. Note that since multiple errors may
+ be reported using a single ERR_FATAL message, thus
+ TOTAL_ERR_FATAL at the end of the file may not match the actual
+ total of all the errors in the file. Sample output:
+-------------------------------------------------------------------------
+localhost /sys/devices/pci0000:00/0000:00:1c.0 # cat aer_dev_fatal
+Undefined 0
+Data Link Protocol 0
+Surprise Down Error 0
+Poisoned TLP 0
+Flow Control Protocol 0
+Completion Timeout 0
+Completer Abort 0
+Unexpected Completion 0
+Receiver Overflow 0
+Malformed TLP 0
+ECRC 0
+Unsupported Request 0
+ACS Violation 0
+Uncorrectable Internal Error 0
+MC Blocked TLP 0
+AtomicOp Egress Blocked 0
+TLP Prefix Blocked Error 0
+TOTAL_ERR_FATAL 0
+-------------------------------------------------------------------------
+
+Where: /sys/bus/pci/devices/<dev>/aer_dev_nonfatal
+Date: July 2018
+Kernel Version: 4.19.0
+Contact: linux-pci@vger.kernel.org, rajatja@google.com
+Description: List of uncorrectable nonfatal errors seen and reported by this
+ PCI device using ERR_NONFATAL. Note that since multiple errors
+ may be reported using a single ERR_FATAL message, thus
+ TOTAL_ERR_NONFATAL at the end of the file may not match the
+ actual total of all the errors in the file. Sample output:
+-------------------------------------------------------------------------
+localhost /sys/devices/pci0000:00/0000:00:1c.0 # cat aer_dev_nonfatal
+Undefined 0
+Data Link Protocol 0
+Surprise Down Error 0
+Poisoned TLP 0
+Flow Control Protocol 0
+Completion Timeout 0
+Completer Abort 0
+Unexpected Completion 0
+Receiver Overflow 0
+Malformed TLP 0
+ECRC 0
+Unsupported Request 0
+ACS Violation 0
+Uncorrectable Internal Error 0
+MC Blocked TLP 0
+AtomicOp Egress Blocked 0
+TLP Prefix Blocked Error 0
+TOTAL_ERR_NONFATAL 0
+-------------------------------------------------------------------------
+
+============================
+PCIe Rootport AER statistics
+============================
+These attributes show up under only the rootports (or root complex event
+collectors) that are AER capable. These indicate the number of error messages as
+"reported to" the rootport. Please note that the rootports also transmit
+(internally) the ERR_* messages for errors seen by the internal rootport PCI
+device, so these counters include them and are thus cumulative of all the error
+messages on the PCI hierarchy originating at that root port.
+
+Where: /sys/bus/pci/devices/<dev>/aer_stats/aer_rootport_total_err_cor
+Date: July 2018
+Kernel Version: 4.19.0
+Contact: linux-pci@vger.kernel.org, rajatja@google.com
+Description: Total number of ERR_COR messages reported to rootport.
+
+Where: /sys/bus/pci/devices/<dev>/aer_stats/aer_rootport_total_err_fatal
+Date: July 2018
+Kernel Version: 4.19.0
+Contact: linux-pci@vger.kernel.org, rajatja@google.com
+Description: Total number of ERR_FATAL messages reported to rootport.
+
+Where: /sys/bus/pci/devices/<dev>/aer_stats/aer_rootport_total_err_nonfatal
+Date: July 2018
+Kernel Version: 4.19.0
+Contact: linux-pci@vger.kernel.org, rajatja@google.com
+Description: Total number of ERR_NONFATAL messages reported to rootport.
diff --git a/Documentation/PCI/00-INDEX b/Documentation/PCI/00-INDEX
index 00c9a90b6f38..206b1d5c1e71 100644
--- a/Documentation/PCI/00-INDEX
+++ b/Documentation/PCI/00-INDEX
@@ -1,5 +1,7 @@
00-INDEX
- this file
+acpi-info.txt
+ - info on how PCI host bridges are represented in ACPI
MSI-HOWTO.txt
- the Message Signaled Interrupts (MSI) Driver Guide HOWTO and FAQ.
PCIEBUS-HOWTO.txt
diff --git a/Documentation/PCI/acpi-info.txt b/Documentation/PCI/acpi-info.txt
new file mode 100644
index 000000000000..3ffa3b03970e
--- /dev/null
+++ b/Documentation/PCI/acpi-info.txt
@@ -0,0 +1,187 @@
+ ACPI considerations for PCI host bridges
+
+The general rule is that the ACPI namespace should describe everything the
+OS might use unless there's another way for the OS to find it [1, 2].
+
+For example, there's no standard hardware mechanism for enumerating PCI
+host bridges, so the ACPI namespace must describe each host bridge, the
+method for accessing PCI config space below it, the address space windows
+the host bridge forwards to PCI (using _CRS), and the routing of legacy
+INTx interrupts (using _PRT).
+
+PCI devices, which are below the host bridge, generally do not need to be
+described via ACPI. The OS can discover them via the standard PCI
+enumeration mechanism, using config accesses to discover and identify
+devices and read and size their BARs. However, ACPI may describe PCI
+devices if it provides power management or hotplug functionality for them
+or if the device has INTx interrupts connected by platform interrupt
+controllers and a _PRT is needed to describe those connections.
+
+ACPI resource description is done via _CRS objects of devices in the ACPI
+namespace [2].   The _CRS is like a generalized PCI BAR: the OS can read
+_CRS and figure out what resource is being consumed even if it doesn't have
+a driver for the device [3].  That's important because it means an old OS
+can work correctly even on a system with new devices unknown to the OS.
+The new devices might not do anything, but the OS can at least make sure no
+resources conflict with them.
+
+Static tables like MCFG, HPET, ECDT, etc., are *not* mechanisms for
+reserving address space. The static tables are for things the OS needs to
+know early in boot, before it can parse the ACPI namespace. If a new table
+is defined, an old OS needs to operate correctly even though it ignores the
+table. _CRS allows that because it is generic and understood by the old
+OS; a static table does not.
+
+If the OS is expected to manage a non-discoverable device described via
+ACPI, that device will have a specific _HID/_CID that tells the OS what
+driver to bind to it, and the _CRS tells the OS and the driver where the
+device's registers are.
+
+PCI host bridges are PNP0A03 or PNP0A08 devices.  Their _CRS should
+describe all the address space they consume.  This includes all the windows
+they forward down to the PCI bus, as well as registers of the host bridge
+itself that are not forwarded to PCI.  The host bridge registers include
+things like secondary/subordinate bus registers that determine the bus
+range below the bridge, window registers that describe the apertures, etc.
+These are all device-specific, non-architected things, so the only way a
+PNP0A03/PNP0A08 driver can manage them is via _PRS/_CRS/_SRS, which contain
+the device-specific details.  The host bridge registers also include ECAM
+space, since it is consumed by the host bridge.
+
+ACPI defines a Consumer/Producer bit to distinguish the bridge registers
+("Consumer") from the bridge apertures ("Producer") [4, 5], but early
+BIOSes didn't use that bit correctly. The result is that the current ACPI
+spec defines Consumer/Producer only for the Extended Address Space
+descriptors; the bit should be ignored in the older QWord/DWord/Word
+Address Space descriptors. Consequently, OSes have to assume all
+QWord/DWord/Word descriptors are windows.
+
+Prior to the addition of Extended Address Space descriptors, the failure of
+Consumer/Producer meant there was no way to describe bridge registers in
+the PNP0A03/PNP0A08 device itself. The workaround was to describe the
+bridge registers (including ECAM space) in PNP0C02 catch-all devices [6].
+With the exception of ECAM, the bridge register space is device-specific
+anyway, so the generic PNP0A03/PNP0A08 driver (pci_root.c) has no need to
+know about it.  
+
+New architectures should be able to use "Consumer" Extended Address Space
+descriptors in the PNP0A03 device for bridge registers, including ECAM,
+although a strict interpretation of [6] might prohibit this. Old x86 and
+ia64 kernels assume all address space descriptors, including "Consumer"
+Extended Address Space ones, are windows, so it would not be safe to
+describe bridge registers this way on those architectures.
+
+PNP0C02 "motherboard" devices are basically a catch-all.  There's no
+programming model for them other than "don't use these resources for
+anything else."  So a PNP0C02 _CRS should claim any address space that is
+(1) not claimed by _CRS under any other device object in the ACPI namespace
+and (2) should not be assigned by the OS to something else.
+
+The PCIe spec requires the Enhanced Configuration Access Method (ECAM)
+unless there's a standard firmware interface for config access, e.g., the
+ia64 SAL interface [7]. A host bridge consumes ECAM memory address space
+and converts memory accesses into PCI configuration accesses. The spec
+defines the ECAM address space layout and functionality; only the base of
+the address space is device-specific. An ACPI OS learns the base address
+from either the static MCFG table or a _CBA method in the PNP0A03 device.
+
+The MCFG table must describe the ECAM space of non-hot pluggable host
+bridges [8]. Since MCFG is a static table and can't be updated by hotplug,
+a _CBA method in the PNP0A03 device describes the ECAM space of a
+hot-pluggable host bridge [9]. Note that for both MCFG and _CBA, the base
+address always corresponds to bus 0, even if the bus range below the bridge
+(which is reported via _CRS) doesn't start at 0.
+
+
+[1] ACPI 6.2, sec 6.1:
+ For any device that is on a non-enumerable type of bus (for example, an
+ ISA bus), OSPM enumerates the devices' identifier(s) and the ACPI
+ system firmware must supply an _HID object ... for each device to
+ enable OSPM to do that.
+
+[2] ACPI 6.2, sec 3.7:
+ The OS enumerates motherboard devices simply by reading through the
+ ACPI Namespace looking for devices with hardware IDs.
+
+ Each device enumerated by ACPI includes ACPI-defined objects in the
+ ACPI Namespace that report the hardware resources the device could
+ occupy [_PRS], an object that reports the resources that are currently
+ used by the device [_CRS], and objects for configuring those resources
+ [_SRS]. The information is used by the Plug and Play OS (OSPM) to
+ configure the devices.
+
+[3] ACPI 6.2, sec 6.2:
+ OSPM uses device configuration objects to configure hardware resources
+ for devices enumerated via ACPI. Device configuration objects provide
+ information about current and possible resource requirements, the
+ relationship between shared resources, and methods for configuring
+ hardware resources.
+
+ When OSPM enumerates a device, it calls _PRS to determine the resource
+ requirements of the device. It may also call _CRS to find the current
+ resource settings for the device. Using this information, the Plug and
+ Play system determines what resources the device should consume and
+ sets those resources by calling the device’s _SRS control method.
+
+ In ACPI, devices can consume resources (for example, legacy keyboards),
+ provide resources (for example, a proprietary PCI bridge), or do both.
+ Unless otherwise specified, resources for a device are assumed to be
+ taken from the nearest matching resource above the device in the device
+ hierarchy.
+
+[4] ACPI 6.2, sec 6.4.3.5.1, 2, 3, 4:
+ QWord/DWord/Word Address Space Descriptor (.1, .2, .3)
+ General Flags: Bit [0] Ignored
+
+ Extended Address Space Descriptor (.4)
+ General Flags: Bit [0] Consumer/Producer:
+ 1–This device consumes this resource
+ 0–This device produces and consumes this resource
+
+[5] ACPI 6.2, sec 19.6.43:
+ ResourceUsage specifies whether the Memory range is consumed by
+ this device (ResourceConsumer) or passed on to child devices
+ (ResourceProducer). If nothing is specified, then
+ ResourceConsumer is assumed.
+
+[6] PCI Firmware 3.2, sec 4.1.2:
+ If the operating system does not natively comprehend reserving the
+ MMCFG region, the MMCFG region must be reserved by firmware. The
+ address range reported in the MCFG table or by _CBA method (see Section
+ 4.1.3) must be reserved by declaring a motherboard resource. For most
+ systems, the motherboard resource would appear at the root of the ACPI
+ namespace (under \_SB) in a node with a _HID of EISAID (PNP0C02), and
+ the resources in this case should not be claimed in the root PCI bus’s
+ _CRS. The resources can optionally be returned in Int15 E820 or
+ EFIGetMemoryMap as reserved memory but must always be reported through
+ ACPI as a motherboard resource.
+
+[7] PCI Express 4.0, sec 7.2.2:
+ For systems that are PC-compatible, or that do not implement a
+ processor-architecture-specific firmware interface standard that allows
+ access to the Configuration Space, the ECAM is required as defined in
+ this section.
+
+[8] PCI Firmware 3.2, sec 4.1.2:
+ The MCFG table is an ACPI table that is used to communicate the base
+ addresses corresponding to the non-hot removable PCI Segment Groups
+ range within a PCI Segment Group available to the operating system at
+ boot. This is required for the PC-compatible systems.
+
+ The MCFG table is only used to communicate the base addresses
+ corresponding to the PCI Segment Groups available to the system at
+ boot.
+
+[9] PCI Firmware 3.2, sec 4.1.3:
+ The _CBA (Memory mapped Configuration Base Address) control method is
+ an optional ACPI object that returns the 64-bit memory mapped
+ configuration base address for the hot plug capable host bridge. The
+ base address returned by _CBA is processor-relative address. The _CBA
+ control method evaluates to an Integer.
+
+ This control method appears under a host bridge object. When the _CBA
+ method appears under an active host bridge object, the operating system
+ evaluates this structure to identify the memory mapped configuration
+ base address corresponding to the PCI Segment Group for the bus number
+ range specified in _CRS method. An ACPI name space object that contains
+ the _CBA method must also contain a corresponding _SEG method.
diff --git a/Documentation/PCI/endpoint/function/binding/pci-test.txt b/Documentation/PCI/endpoint/function/binding/pci-test.txt
index 3b68b955fb50..cd76ba47394b 100644
--- a/Documentation/PCI/endpoint/function/binding/pci-test.txt
+++ b/Documentation/PCI/endpoint/function/binding/pci-test.txt
@@ -15,3 +15,5 @@ subsys_id : don't care
interrupt_pin : Should be 1 - INTA, 2 - INTB, 3 - INTC, 4 -INTD
msi_interrupts : Should be 1 to 32 depending on the number of MSI interrupts
to test
+msix_interrupts : Should be 1 to 2048 depending on the number of MSI-X
+ interrupts to test
diff --git a/Documentation/PCI/endpoint/pci-endpoint.txt b/Documentation/PCI/endpoint/pci-endpoint.txt
index 9b1d66829290..e86a96b66a6a 100644
--- a/Documentation/PCI/endpoint/pci-endpoint.txt
+++ b/Documentation/PCI/endpoint/pci-endpoint.txt
@@ -44,7 +44,7 @@ by the PCI controller driver.
* clear_bar: ops to reset the BAR
* alloc_addr_space: ops to allocate in PCI controller address space
* free_addr_space: ops to free the allocated address space
- * raise_irq: ops to raise a legacy or MSI interrupt
+ * raise_irq: ops to raise a legacy, MSI or MSI-X interrupt
* start: ops to start the PCI link
* stop: ops to stop the PCI link
@@ -96,7 +96,7 @@ by the PCI endpoint function driver.
*) pci_epc_raise_irq()
The PCI endpoint function driver should use pci_epc_raise_irq() to raise
- Legacy Interrupt or MSI Interrupt.
+ Legacy Interrupt, MSI or MSI-X Interrupt.
*) pci_epc_mem_alloc_addr()
diff --git a/Documentation/PCI/endpoint/pci-test-function.txt b/Documentation/PCI/endpoint/pci-test-function.txt
index 0c519c9bf94a..5916f1f592bb 100644
--- a/Documentation/PCI/endpoint/pci-test-function.txt
+++ b/Documentation/PCI/endpoint/pci-test-function.txt
@@ -20,6 +20,8 @@ The PCI endpoint test device has the following registers:
5) PCI_ENDPOINT_TEST_DST_ADDR
6) PCI_ENDPOINT_TEST_SIZE
7) PCI_ENDPOINT_TEST_CHECKSUM
+ 8) PCI_ENDPOINT_TEST_IRQ_TYPE
+ 9) PCI_ENDPOINT_TEST_IRQ_NUMBER
*) PCI_ENDPOINT_TEST_MAGIC
@@ -34,10 +36,10 @@ that the endpoint device must perform.
Bitfield Description:
Bit 0 : raise legacy IRQ
Bit 1 : raise MSI IRQ
- Bit 2 - 7 : MSI interrupt number
- Bit 8 : read command (read data from RC buffer)
- Bit 9 : write command (write data to RC buffer)
- Bit 10 : copy command (copy data from one RC buffer to another
+ Bit 2 : raise MSI-X IRQ
+ Bit 3 : read command (read data from RC buffer)
+ Bit 4 : write command (write data to RC buffer)
+ Bit 5 : copy command (copy data from one RC buffer to another
RC buffer)
*) PCI_ENDPOINT_TEST_STATUS
@@ -64,3 +66,22 @@ COPY/READ command.
This register contains the destination address (RC buffer address) for
the COPY/WRITE command.
+
+*) PCI_ENDPOINT_TEST_IRQ_TYPE
+
+This register contains the interrupt type (Legacy/MSI) triggered
+for the READ/WRITE/COPY and raise IRQ (Legacy/MSI) commands.
+
+Possible types:
+ - Legacy : 0
+ - MSI : 1
+ - MSI-X : 2
+
+*) PCI_ENDPOINT_TEST_IRQ_NUMBER
+
+This register contains the triggered ID interrupt.
+
+Admissible values:
+ - Legacy : 0
+ - MSI : [1 .. 32]
+ - MSI-X : [1 .. 2048]
diff --git a/Documentation/PCI/endpoint/pci-test-howto.txt b/Documentation/PCI/endpoint/pci-test-howto.txt
index 75f48c3bb191..e40cf0fb58d7 100644
--- a/Documentation/PCI/endpoint/pci-test-howto.txt
+++ b/Documentation/PCI/endpoint/pci-test-howto.txt
@@ -45,9 +45,9 @@ The PCI endpoint framework populates the directory with the following
configurable fields.
# ls functions/pci_epf_test/func1
- baseclass_code interrupt_pin revid subsys_vendor_id
- cache_line_size msi_interrupts subclass_code vendorid
- deviceid progif_code subsys_id
+ baseclass_code interrupt_pin progif_code subsys_id
+ cache_line_size msi_interrupts revid subsys_vendorid
+ deviceid msix_interrupts subclass_code vendorid
The PCI endpoint function driver populates these entries with default values
when the device is bound to the driver. The pci-epf-test driver populates
@@ -67,6 +67,7 @@ device, the following commands can be used.
# echo 0x104c > functions/pci_epf_test/func1/vendorid
# echo 0xb500 > functions/pci_epf_test/func1/deviceid
# echo 16 > functions/pci_epf_test/func1/msi_interrupts
+ # echo 8 > functions/pci_epf_test/func1/msix_interrupts
1.5 Binding pci-epf-test Device to EP Controller
@@ -120,7 +121,9 @@ following commands.
Interrupt tests
+ SET IRQ TYPE TO LEGACY: OKAY
LEGACY IRQ: NOT OKAY
+ SET IRQ TYPE TO MSI: OKAY
MSI1: OKAY
MSI2: OKAY
MSI3: OKAY
@@ -153,9 +156,30 @@ following commands.
MSI30: NOT OKAY
MSI31: NOT OKAY
MSI32: NOT OKAY
+ SET IRQ TYPE TO MSI-X: OKAY
+ MSI-X1: OKAY
+ MSI-X2: OKAY
+ MSI-X3: OKAY
+ MSI-X4: OKAY
+ MSI-X5: OKAY
+ MSI-X6: OKAY
+ MSI-X7: OKAY
+ MSI-X8: OKAY
+ MSI-X9: NOT OKAY
+ MSI-X10: NOT OKAY
+ MSI-X11: NOT OKAY
+ MSI-X12: NOT OKAY
+ MSI-X13: NOT OKAY
+ MSI-X14: NOT OKAY
+ MSI-X15: NOT OKAY
+ MSI-X16: NOT OKAY
+ [...]
+ MSI-X2047: NOT OKAY
+ MSI-X2048: NOT OKAY
Read Tests
+ SET IRQ TYPE TO MSI: OKAY
READ ( 1 bytes): OKAY
READ ( 1024 bytes): OKAY
READ ( 1025 bytes): OKAY
diff --git a/Documentation/PCI/pcieaer-howto.txt b/Documentation/PCI/pcieaer-howto.txt
index acd0dddd6bb8..48ce7903e3c6 100644
--- a/Documentation/PCI/pcieaer-howto.txt
+++ b/Documentation/PCI/pcieaer-howto.txt
@@ -73,6 +73,11 @@ In the example, 'Requester ID' means the ID of the device who sends
the error message to root port. Pls. refer to pci express specs for
other fields.
+2.4 AER Statistics / Counters
+
+When PCIe AER errors are captured, the counters / statistics are also exposed
+in the form of sysfs attributes which are documented at
+Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats
3. Developer Guide
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 0c883029881a..adafe47ac376 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -3089,8 +3089,31 @@
See header of drivers/block/paride/pcd.c.
See also Documentation/blockdev/paride.txt.
- pci=option[,option...] [PCI] various PCI subsystem options:
- earlydump [X86] dump PCI config space before the kernel
+ pci=option[,option...] [PCI] various PCI subsystem options.
+
+ Some options herein operate on a specific device
+ or a set of devices (<pci_dev>). These are
+ specified in one of the following formats:
+
+ [<domain>:]<bus>:<dev>.<func>[/<dev>.<func>]*
+ pci:<vendor>:<device>[:<subvendor>:<subdevice>]
+
+ Note: the first format specifies a PCI
+ bus/device/function address which may change
+ if new hardware is inserted, if motherboard
+ firmware changes, or due to changes caused
+ by other kernel parameters. If the
+ domain is left unspecified, it is
+ taken to be zero. Optionally, a path
+ to a device through multiple device/function
+ addresses can be specified after the base
+ address (this is more robust against
+ renumbering issues). The second format
+ selects devices using IDs from the
+ configuration space which may match multiple
+ devices in the system.
+
+ earlydump dump PCI config space before the kernel
changes anything
off [X86] don't probe for the PCI bus
bios [X86-32] force use of PCI BIOS, don't access
@@ -3218,11 +3241,10 @@
window. The default value is 64 megabytes.
resource_alignment=
Format:
- [<order of align>@][<domain>:]<bus>:<slot>.<func>[; ...]
- [<order of align>@]pci:<vendor>:<device>\
- [:<subvendor>:<subdevice>][; ...]
+ [<order of align>@]<pci_dev>[; ...]
Specifies alignment and device to reassign
- aligned memory resources.
+ aligned memory resources. How to
+ specify the device is described above.
If <order of align> is not specified,
PAGE_SIZE is used as alignment.
PCI-PCI bridge can be specified, if resource
@@ -3265,6 +3287,15 @@
Adding the window is slightly risky (it may
conflict with unreported devices), so this
taints the kernel.
+ disable_acs_redir=<pci_dev>[; ...]
+ Specify one or more PCI devices (in the format
+ specified above) separated by semicolons.
+ Each device specified will have the PCI ACS
+ redirect capabilities forced off which will
+ allow P2P traffic between devices through
+ bridges without forcing it upstream. Note:
+ this removes isolation between devices and
+ may put more devices in an IOMMU group.
pcie_aspm= [PCIE] Forcibly enable or disable PCIe Active State Power
Management.
diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.txt b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.txt
index 9a305237fa6e..4a0475e2ba7e 100644
--- a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.txt
+++ b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-ep.txt
@@ -9,6 +9,9 @@ Required properties:
Optional properties:
- max-functions: Maximum number of functions that can be configured (default 1).
+- phys: From PHY bindings: List of Generic PHY phandles. One per lane if more
+ than one in the list. If only one PHY listed it must manage all lanes.
+- phy-names: List of names to identify the PHY.
Example:
@@ -19,4 +22,6 @@ pcie@fc000000 {
reg-names = "reg", "mem";
cdns,max-outbound-regions = <16>;
max-functions = /bits/ 8 <8>;
+ phys = <&ep_phy0 &ep_phy1>;
+ phy-names = "pcie-lane0","pcie-lane1";
};
diff --git a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
index 20a33f38f69d..91de69c713a9 100644
--- a/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
+++ b/Documentation/devicetree/bindings/pci/cdns,cdns-pcie-host.txt
@@ -24,6 +24,9 @@ Optional properties:
translations (default 32)
- vendor-id: The PCI vendor ID (16 bits, default is design dependent)
- device-id: The PCI device ID (16 bits, default is design dependent)
+- phys: From PHY bindings: List of Generic PHY phandles. One per lane if more
+ than one in the list. If only one PHY listed it must manage all lanes.
+- phy-names: List of names to identify the PHY.
Example:
@@ -57,4 +60,7 @@ pcie@fb000000 {
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
msi-parent = <&its_pci>;
+
+ phys = <&pcie_phy0>;
+ phy-names = "pcie-phy";
};
diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt
index 9aeb5f0ea701..d6ed527985cf 100644
--- a/Documentation/ioctl/ioctl-number.txt
+++ b/Documentation/ioctl/ioctl-number.txt
@@ -166,6 +166,7 @@ Code Seq#(hex) Include File Comments
'P' all linux/soundcard.h conflict!
'P' 60-6F sound/sscape_ioctl.h conflict!
'P' 00-0F drivers/usb/class/usblp.c conflict!
+'P' 01-09 drivers/misc/pci_endpoint_test.c conflict!
'Q' all linux/soundcard.h
'R' 00-1F linux/random.h conflict!
'R' 01 linux/rfkill.h conflict!
diff --git a/Documentation/misc-devices/pci-endpoint-test.txt b/Documentation/misc-devices/pci-endpoint-test.txt
index 4ebc3594b32c..58ccca4416b1 100644
--- a/Documentation/misc-devices/pci-endpoint-test.txt
+++ b/Documentation/misc-devices/pci-endpoint-test.txt
@@ -10,6 +10,7 @@ The PCI driver for the test device performs the following tests
*) verifying addresses programmed in BAR
*) raise legacy IRQ
*) raise MSI IRQ
+ *) raise MSI-X IRQ
*) read data
*) write data
*) copy data
@@ -25,6 +26,11 @@ ioctl
PCITEST_LEGACY_IRQ: Tests legacy IRQ
PCITEST_MSI: Tests message signalled interrupts. The MSI number
to be tested should be passed as argument.
+ PCITEST_MSIX: Tests message signalled interrupts. The MSI-X number
+ to be tested should be passed as argument.
+ PCITEST_SET_IRQTYPE: Changes driver IRQ type configuration. The IRQ type
+ should be passed as argument (0: Legacy, 1:MSI, 2:MSI-X).
+ PCITEST_GET_IRQTYPE: Gets driver IRQ type configuration.
PCITEST_WRITE: Perform write tests. The size of the buffer should be passed
as argument.
PCITEST_READ: Perform read tests. The size of the buffer should be passed