Merge tag 'clk-for-linus-3.13' of git://git.linaro.org/people/mturquette/linux

Pull clock framework changes from Mike Turquette:
 "The clock changes for 3.13 are an even mix of framework improvements &
  bug fixes along with updates to existing clock drivers and the
  additional of new clock drivers"

* tag 'clk-for-linus-3.13' of git://git.linaro.org/people/mturquette/linux:
  clk: new driver for efm32 SoC
  clk: of: helper for determining number of parent clocks
  clk/zynq: Fix possible memory leak
  clk: keystone: Build Keystone clock drivers
  clk: keystone: Add gate control clock driver
  clk: keystone: add Keystone PLL clock driver
  Documentation: Add documentation for APM X-Gene clock binding
  clk: arm64: Add DTS clock entry for APM X-Gene Storm SoC
  clk: Add APM X-Gene SoC clock driver
  clk: wm831x: get rid of the implementation of remove function
  clk: Correct lookup logic in clk_fetch_parent_index()
  clk: Use kcalloc() to allocate arrays
  clk: Add error handling to clk_fetch_parent_index()

4 files changed, 235 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/clock/efm32-clock.txt b/Documentation/devicetree/bindings/clock/efm32-clock.txt
new file mode 100644
index 000000000000..263d293f6a10
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/efm32-clock.txt
@@ -0,0 +1,11 @@
+* Clock bindings for Energy Micro efm32 Giant Gecko's Clock Management Unit
+
+Required properties:
+- compatible: Should be "efm32gg,cmu"
+- reg: Base address and length of the register set
+- interrupts: Interrupt used by the CMU
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock ID in
+its "clocks" phandle cell. The header efm32-clk.h contains a list of available
+IDs.
diff --git a/Documentation/devicetree/bindings/clock/keystone-gate.txt b/Documentation/devicetree/bindings/clock/keystone-gate.txt
new file mode 100644
index 000000000000..c5aa187026e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/keystone-gate.txt
@@ -0,0 +1,29 @@
+Status: Unstable - ABI compatibility may be broken in the future
+
+Binding for Keystone gate control driver which uses PSC controller IP.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "ti,keystone,psc-clock".
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : parent clock phandle
+- reg :	psc control and domain address address space
+- reg-names : psc control and domain registers
+- domain-id : psc domain id needed to check the transition state register
+
+Optional properties:
+- clock-output-names : From common clock binding to override the
+			default output clock name
+Example:
+	clkusb: clkusb {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,psc-clock";
+		clocks = <&chipclk16>;
+		clock-output-names = "usb";
+		reg = <0x02350008 0xb00>, <0x02350000 0x400>;
+		reg-names = "control", "domain";
+		domain-id = <0>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/keystone-pll.txt b/Documentation/devicetree/bindings/clock/keystone-pll.txt
new file mode 100644
index 000000000000..12bd72605a31
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/keystone-pll.txt
@@ -0,0 +1,84 @@
+Status: Unstable - ABI compatibility may be broken in the future
+
+Binding for keystone PLLs. The main PLL IP typically has a multiplier,
+a divider and a post divider. The additional PLL IPs like ARMPLL, DDRPLL
+and PAPLL are controlled by the memory mapped register where as the Main
+PLL is controlled by a PLL controller registers along with memory mapped
+registers.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- #clock-cells : from common clock binding; shall be set to 0.
+- compatible : shall be "ti,keystone,main-pll-clock" or "ti,keystone,pll-clock"
+- clocks : parent clock phandle
+- reg - pll control0 and pll multipler registers
+- reg-names : control and multiplier. The multiplier is applicable only for
+		main pll clock
+- fixed-postdiv : fixed post divider value
+
+Example:
+	mainpllclk: mainpllclk@2310110 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,main-pll-clock";
+		clocks = <&refclkmain>;
+		reg = <0x02620350 4>, <0x02310110 4>;
+		reg-names = "control", "multiplier";
+		fixed-postdiv = <2>;
+	};
+
+	papllclk: papllclk@2620358 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-clock";
+		clocks = <&refclkmain>;
+		clock-output-names = "pa-pll-clk";
+		reg = <0x02620358 4>;
+		reg-names = "control";
+		fixed-postdiv = <6>;
+	};
+
+Required properties:
+- #clock-cells : from common clock binding; shall be set to 0.
+- compatible : shall be "ti,keystone,pll-mux-clock"
+- clocks : link phandles of parent clocks
+- reg - pll mux register
+- bit-shift : number of bits to shift the bit-mask
+- bit-mask : arbitrary bitmask for programming the mux
+
+Optional properties:
+- clock-output-names : From common clock binding.
+
+Example:
+	mainmuxclk: mainmuxclk@2310108 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-mux-clock";
+		clocks = <&mainpllclk>, <&refclkmain>;
+		reg = <0x02310108 4>;
+		bit-shift = <23>;
+		bit-mask = <1>;
+		clock-output-names = "mainmuxclk";
+	};
+
+Required properties:
+- #clock-cells : from common clock binding; shall be set to 0.
+- compatible : shall be "ti,keystone,pll-divider-clock"
+- clocks : parent clock phandle
+- reg - pll mux register
+- bit-shift : number of bits to shift the bit-mask
+- bit-mask : arbitrary bitmask for programming the divider
+
+Optional properties:
+- clock-output-names : From common clock binding.
+
+Example:
+	gemtraceclk: gemtraceclk@2310120 {
+		#clock-cells = <0>;
+		compatible = "ti,keystone,pll-divider-clock";
+		clocks = <&mainmuxclk>;
+		reg = <0x02310120 4>;
+		bit-shift = <0>;
+		bit-mask = <8>;
+		clock-output-names = "gemtraceclk";
+	};
diff --git a/Documentation/devicetree/bindings/clock/xgene.txt b/Documentation/devicetree/bindings/clock/xgene.txt
new file mode 100644
index 000000000000..1c4ef773feea
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/xgene.txt
@@ -0,0 +1,111 @@
+Device Tree Clock bindings for APM X-Gene
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of the following:
+	"apm,xgene-socpll-clock" - for a X-Gene SoC PLL clock
+	"apm,xgene-pcppll-clock" - for a X-Gene PCP PLL clock
+	"apm,xgene-device-clock" - for a X-Gene device clock
+
+Required properties for SoC or PCP PLL clocks:
+- reg : shall be the physical PLL register address for the pll clock.
+- clocks : shall be the input parent clock phandle for the clock. This should
+	be the reference clock.
+- #clock-cells : shall be set to 1.
+- clock-output-names : shall be the name of the PLL referenced by derive
+  clock.
+Optional properties for PLL clocks:
+- clock-names : shall be the name of the PLL. If missing, use the device name.
+
+Required properties for device clocks:
+- reg : shall be a list of address and length pairs describing the CSR
+         reset and/or the divider. Either may be omitted, but at least
+         one must be present.
+ - reg-names : shall be a string list describing the reg resource. This
+               may include "csr-reg" and/or "div-reg". If this property
+               is not present, the reg property is assumed to describe
+               only "csr-reg".
+- clocks : shall be the input parent clock phandle for the clock.
+- #clock-cells : shall be set to 1.
+- clock-output-names : shall be the name of the device referenced.
+Optional properties for device clocks:
+- clock-names : shall be the name of the device clock. If missing, use the
+                device name.
+- csr-offset : Offset to the CSR reset register from the reset address base.
+               Default is 0.
+- csr-mask : CSR reset mask bit. Default is 0xF.
+- enable-offset : Offset to the enable register from the reset address base.
+                  Default is 0x8.
+- enable-mask : CSR enable mask bit. Default is 0xF.
+- divider-offset : Offset to the divider CSR register from the divider base.
+                   Default is 0x0.
+- divider-width : Width of the divider register. Default is 0.
+- divider-shift : Bit shift of the divider register. Default is 0.
+
+For example:
+
+	pcppll: pcppll@17000100 {
+		compatible = "apm,xgene-pcppll-clock";
+		#clock-cells = <1>;
+		clocks = <&refclk 0>;
+		clock-names = "pcppll";
+		reg = <0x0 0x17000100 0x0 0x1000>;
+		clock-output-names = "pcppll";
+		type = <0>;
+	};
+
+	socpll: socpll@17000120 {
+		compatible = "apm,xgene-socpll-clock";
+		#clock-cells = <1>;
+		clocks = <&refclk 0>;
+		clock-names = "socpll";
+		reg = <0x0 0x17000120 0x0 0x1000>;
+		clock-output-names = "socpll";
+		type = <1>;
+	};
+
+	qmlclk: qmlclk {
+		compatible = "apm,xgene-device-clock";
+		#clock-cells = <1>;
+		clocks = <&socplldiv2 0>;
+		clock-names = "qmlclk";
+		reg = <0x0 0x1703C000 0x0 0x1000>;
+		reg-name = "csr-reg";
+		clock-output-names = "qmlclk";
+	};
+
+	ethclk: ethclk {
+		compatible = "apm,xgene-device-clock";
+		#clock-cells = <1>;
+		clocks = <&socplldiv2 0>;
+		clock-names = "ethclk";
+		reg = <0x0 0x17000000 0x0 0x1000>;
+		reg-names = "div-reg";
+		divider-offset = <0x238>;
+		divider-width = <0x9>;
+		divider-shift = <0x0>;
+		clock-output-names = "ethclk";
+	};
+
+	apbclk: apbclk {
+		compatible = "apm,xgene-device-clock";
+		#clock-cells = <1>;
+		clocks = <&ahbclk 0>;
+		clock-names = "apbclk";
+		reg = <0x0 0x1F2AC000 0x0 0x1000
+			0x0 0x1F2AC000 0x0 0x1000>;
+		reg-names = "csr-reg", "div-reg";
+		csr-offset = <0x0>;
+		csr-mask = <0x200>;
+		enable-offset = <0x8>;
+		enable-mask = <0x200>;
+		divider-offset = <0x10>;
+		divider-width = <0x2>;
+		divider-shift = <0x0>;
+		flags = <0x8>;
+		clock-output-names = "apbclk";
+	};
+