summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorRichard Röjfors <richard.rojfors.ext@mocean-labs.com>2009-06-05 15:40:32 +0200
committerBen Dooks <ben-linux@fluff.org>2009-06-13 10:39:28 +0100
commitdd14be4c274fc484eccace03ae9726e516630331 (patch)
tree3b8cfb3a060b9f1232d37de749b82c659248e8c5 /Documentation
parent7d85ccd816535f56880f7dfdb4de056794376b2c (diff)
downloadlinux-dd14be4c274fc484eccace03ae9726e516630331.tar.bz2
i2c-ocores: Can add I2C devices to the bus
There is sometimes a need for the ocores driver to add devices to the bus when installed. i2c_register_board_info can not always be used, because the I2C devices are not known at an early state, they could for instance be connected on a I2C bus on a PCI device which has the Open Cores IP. i2c_new_device can not be used in all cases either since the resulting bus nummer might be unknown. The solution is the pass a list of I2C devices in the platform data to the Open Cores driver. This is useful for MFD drivers. Signed-off-by: Richard Röjfors <richard.rojfors.ext@mocean-labs.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/i2c/busses/i2c-ocores17
1 files changed, 17 insertions, 0 deletions
diff --git a/Documentation/i2c/busses/i2c-ocores b/Documentation/i2c/busses/i2c-ocores
index cfcebb10d14e..c269aaa2f26a 100644
--- a/Documentation/i2c/busses/i2c-ocores
+++ b/Documentation/i2c/busses/i2c-ocores
@@ -20,6 +20,8 @@ platform_device with the base address and interrupt number. The
dev.platform_data of the device should also point to a struct
ocores_i2c_platform_data (see linux/i2c-ocores.h) describing the
distance between registers and the input clock speed.
+There is also a possibility to attach a list of i2c_board_info which
+the i2c-ocores driver will add to the bus upon creation.
E.G. something like:
@@ -36,9 +38,24 @@ static struct resource ocores_resources[] = {
},
};
+/* optional board info */
+struct i2c_board_info ocores_i2c_board_info[] = {
+ {
+ I2C_BOARD_INFO("tsc2003", 0x48),
+ .platform_data = &tsc2003_platform_data,
+ .irq = TSC_IRQ
+ },
+ {
+ I2C_BOARD_INFO("adv7180", 0x42 >> 1),
+ .irq = ADV_IRQ
+ }
+};
+
static struct ocores_i2c_platform_data myi2c_data = {
.regstep = 2, /* two bytes between registers */
.clock_khz = 50000, /* input clock of 50MHz */
+ .devices = ocores_i2c_board_info, /* optional table of devices */
+ .num_devices = ARRAY_SIZE(ocores_i2c_board_info), /* table size */
};
static struct platform_device myi2c = {