summaryrefslogtreecommitdiffstats
path: root/Documentation
diff options
context:
space:
mode:
authorThomas Gleixner <tglx@linutronix.de>2015-04-08 23:26:21 +0200
committerThomas Gleixner <tglx@linutronix.de>2015-04-08 23:26:21 +0200
commit462b69b1e43ceccab68a47d65b1e46520cd0fdc0 (patch)
tree3c961fcb5889c5ab14ab36d8ef7421fc96c95959 /Documentation
parentd8bf368d0631d4bc2612d8bf2e4e8e74e620d0cc (diff)
parentf22e6e847115abc3a0e2ad7bb18d243d42275af1 (diff)
downloadlinux-462b69b1e43ceccab68a47d65b1e46520cd0fdc0.tar.bz2
Merge branch 'linus' into irq/core to get the GIC updates which
conflict with pending GIC changes. Conflicts: drivers/usb/isp1760/isp1760-core.c
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/CodeOfConflict27
-rw-r--r--Documentation/devicetree/bindings/arm/exynos/power_domain.txt2
-rw-r--r--Documentation/devicetree/bindings/arm/sti.txt4
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-imx.txt1
-rw-r--r--Documentation/devicetree/bindings/net/amd-xgbe-phy.txt4
-rw-r--r--Documentation/devicetree/bindings/net/apm-xgene-enet.txt5
-rw-r--r--Documentation/devicetree/bindings/net/dsa/dsa.txt4
-rw-r--r--Documentation/devicetree/bindings/power/power_domain.txt29
-rw-r--r--Documentation/devicetree/bindings/serial/8250.txt (renamed from Documentation/devicetree/bindings/serial/of-serial.txt)0
-rw-r--r--Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt19
-rw-r--r--Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt16
-rw-r--r--Documentation/devicetree/bindings/submitting-patches.txt3
-rw-r--r--Documentation/devicetree/bindings/vendor-prefixes.txt2
-rw-r--r--Documentation/devicetree/bindings/watchdog/atmel-wdt.txt5
-rw-r--r--Documentation/input/alps.txt8
-rw-r--r--Documentation/input/event-codes.txt6
-rw-r--r--Documentation/input/multi-touch-protocol.txt9
-rw-r--r--Documentation/power/suspend-and-interrupts.txt22
18 files changed, 156 insertions, 10 deletions
diff --git a/Documentation/CodeOfConflict b/Documentation/CodeOfConflict
new file mode 100644
index 000000000000..1684d0b4efa6
--- /dev/null
+++ b/Documentation/CodeOfConflict
@@ -0,0 +1,27 @@
+Code of Conflict
+----------------
+
+The Linux kernel development effort is a very personal process compared
+to "traditional" ways of developing software. Your code and ideas
+behind it will be carefully reviewed, often resulting in critique and
+criticism. The review will almost always require improvements to the
+code before it can be included in the kernel. Know that this happens
+because everyone involved wants to see the best possible solution for
+the overall success of Linux. This development process has been proven
+to create the most robust operating system kernel ever, and we do not
+want to do anything to cause the quality of submission and eventual
+result to ever decrease.
+
+If however, anyone feels personally abused, threatened, or otherwise
+uncomfortable due to this process, that is not acceptable. If so,
+please contact the Linux Foundation's Technical Advisory Board at
+<tab@lists.linux-foundation.org>, or the individual members, and they
+will work to resolve the issue to the best of their ability. For more
+information on who is on the Technical Advisory Board and what their
+role is, please see:
+ http://www.linuxfoundation.org/programs/advisory-councils/tab
+
+As a reviewer of code, please strive to keep things civil and focused on
+the technical issues involved. We are all humans, and frustrations can
+be high on both sides of the process. Try to keep in mind the immortal
+words of Bill and Ted, "Be excellent to each other."
diff --git a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
index f4445e5a2bbb..1e097037349c 100644
--- a/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
+++ b/Documentation/devicetree/bindings/arm/exynos/power_domain.txt
@@ -22,6 +22,8 @@ Optional Properties:
- pclkN, clkN: Pairs of parent of input clock and input clock to the
devices in this power domain. Maximum of 4 pairs (N = 0 to 3)
are supported currently.
+- power-domains: phandle pointing to the parent power domain, for more details
+ see Documentation/devicetree/bindings/power/power_domain.txt
Node of a device using power domains must have a power-domains property
defined with a phandle to respective power domain.
diff --git a/Documentation/devicetree/bindings/arm/sti.txt b/Documentation/devicetree/bindings/arm/sti.txt
index d70ec358736c..8d27f6b084c7 100644
--- a/Documentation/devicetree/bindings/arm/sti.txt
+++ b/Documentation/devicetree/bindings/arm/sti.txt
@@ -13,6 +13,10 @@ Boards with the ST STiH407 SoC shall have the following properties:
Required root node property:
compatible = "st,stih407";
+Boards with the ST STiH410 SoC shall have the following properties:
+Required root node property:
+compatible = "st,stih410";
+
Boards with the ST STiH418 SoC shall have the following properties:
Required root node property:
compatible = "st,stih418";
diff --git a/Documentation/devicetree/bindings/i2c/i2c-imx.txt b/Documentation/devicetree/bindings/i2c/i2c-imx.txt
index 52d37fd8d3e5..ce4311d726ae 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-imx.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-imx.txt
@@ -7,6 +7,7 @@ Required properties:
- "fsl,vf610-i2c" for I2C compatible with the one integrated on Vybrid vf610 SoC
- reg : Should contain I2C/HS-I2C registers location and length
- interrupts : Should contain I2C/HS-I2C interrupt
+- clocks : Should contain the I2C/HS-I2C clock specifier
Optional properties:
- clock-frequency : Constains desired I2C/HS-I2C bus clock frequency in Hz.
diff --git a/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt b/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt
index 33df3932168e..8db32384a486 100644
--- a/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt
+++ b/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt
@@ -27,6 +27,8 @@ property is used.
- amd,serdes-cdr-rate: CDR rate speed selection
- amd,serdes-pq-skew: PQ (data sampling) skew
- amd,serdes-tx-amp: TX amplitude boost
+- amd,serdes-dfe-tap-config: DFE taps available to run
+- amd,serdes-dfe-tap-enable: DFE taps to enable
Example:
xgbe_phy@e1240800 {
@@ -41,4 +43,6 @@ Example:
amd,serdes-cdr-rate = <2>, <2>, <7>;
amd,serdes-pq-skew = <10>, <10>, <30>;
amd,serdes-tx-amp = <15>, <15>, <10>;
+ amd,serdes-dfe-tap-config = <3>, <3>, <1>;
+ amd,serdes-dfe-tap-enable = <0>, <0>, <127>;
};
diff --git a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt
index cfcc52705ed8..6151999c5dca 100644
--- a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt
+++ b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt
@@ -4,7 +4,10 @@ Ethernet nodes are defined to describe on-chip ethernet interfaces in
APM X-Gene SoC.
Required properties for all the ethernet interfaces:
-- compatible: Should be "apm,xgene-enet"
+- compatible: Should state binding information from the following list,
+ - "apm,xgene-enet": RGMII based 1G interface
+ - "apm,xgene1-sgenet": SGMII based 1G interface
+ - "apm,xgene1-xgenet": XFI based 10G interface
- reg: Address and length of the register set for the device. It contains the
information of registers in the same order as described by reg-names
- reg-names: Should contain the register set names
diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.txt b/Documentation/devicetree/bindings/net/dsa/dsa.txt
index e124847443f8..f0b4cd72411d 100644
--- a/Documentation/devicetree/bindings/net/dsa/dsa.txt
+++ b/Documentation/devicetree/bindings/net/dsa/dsa.txt
@@ -19,7 +19,9 @@ the parent DSA node. The maximum number of allowed child nodes is 4
(DSA_MAX_SWITCHES).
Each of these switch child nodes should have the following required properties:
-- reg : Describes the switch address on the MII bus
+- reg : Contains two fields. The first one describes the
+ address on the MII bus. The second is the switch
+ number that must be unique in cascaded configurations
- #address-cells : Must be 1
- #size-cells : Must be 0
diff --git a/Documentation/devicetree/bindings/power/power_domain.txt b/Documentation/devicetree/bindings/power/power_domain.txt
index 98c16672ab5f..0f8ed3710c66 100644
--- a/Documentation/devicetree/bindings/power/power_domain.txt
+++ b/Documentation/devicetree/bindings/power/power_domain.txt
@@ -19,6 +19,16 @@ Required properties:
providing multiple PM domains (e.g. power controllers), but can be any value
as specified by device tree binding documentation of particular provider.
+Optional properties:
+ - power-domains : A phandle and PM domain specifier as defined by bindings of
+ the power controller specified by phandle.
+ Some power domains might be powered from another power domain (or have
+ other hardware specific dependencies). For representing such dependency
+ a standard PM domain consumer binding is used. When provided, all domains
+ created by the given provider should be subdomains of the domain
+ specified by this binding. More details about power domain specifier are
+ available in the next section.
+
Example:
power: power-controller@12340000 {
@@ -30,6 +40,25 @@ Example:
The node above defines a power controller that is a PM domain provider and
expects one cell as its phandle argument.
+Example 2:
+
+ parent: power-controller@12340000 {
+ compatible = "foo,power-controller";
+ reg = <0x12340000 0x1000>;
+ #power-domain-cells = <1>;
+ };
+
+ child: power-controller@12340000 {
+ compatible = "foo,power-controller";
+ reg = <0x12341000 0x1000>;
+ power-domains = <&parent 0>;
+ #power-domain-cells = <1>;
+ };
+
+The nodes above define two power controllers: 'parent' and 'child'.
+Domains created by the 'child' power controller are subdomains of '0' power
+domain provided by the 'parent' power controller.
+
==PM domain consumers==
Required properties:
diff --git a/Documentation/devicetree/bindings/serial/of-serial.txt b/Documentation/devicetree/bindings/serial/8250.txt
index 91d5ab0e60fc..91d5ab0e60fc 100644
--- a/Documentation/devicetree/bindings/serial/of-serial.txt
+++ b/Documentation/devicetree/bindings/serial/8250.txt
diff --git a/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt b/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt
new file mode 100644
index 000000000000..ebcbb62c0a76
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt
@@ -0,0 +1,19 @@
+ETRAX FS UART
+
+Required properties:
+- compatible : "axis,etraxfs-uart"
+- reg: offset and length of the register set for the device.
+- interrupts: device interrupt
+
+Optional properties:
+- {dtr,dsr,ri,cd}-gpios: specify a GPIO for DTR/DSR/RI/CD
+ line respectively.
+
+Example:
+
+serial@b00260000 {
+ compatible = "axis,etraxfs-uart";
+ reg = <0xb0026000 0x1000>;
+ interrupts = <68>;
+ status = "disabled";
+};
diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt
index 7f76214f728a..289c40ed7470 100644
--- a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt
+++ b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt
@@ -21,6 +21,18 @@ Optional properties:
- reg-io-width : the size (in bytes) of the IO accesses that should be
performed on the device. If this property is not present then single byte
accesses are used.
+- dcd-override : Override the DCD modem status signal. This signal will always
+ be reported as active instead of being obtained from the modem status
+ register. Define this if your serial port does not use this pin.
+- dsr-override : Override the DTS modem status signal. This signal will always
+ be reported as active instead of being obtained from the modem status
+ register. Define this if your serial port does not use this pin.
+- cts-override : Override the CTS modem status signal. This signal will always
+ be reported as active instead of being obtained from the modem status
+ register. Define this if your serial port does not use this pin.
+- ri-override : Override the RI modem status signal. This signal will always be
+ reported as inactive instead of being obtained from the modem status register.
+ Define this if your serial port does not use this pin.
Example:
@@ -31,6 +43,10 @@ Example:
interrupts = <10>;
reg-shift = <2>;
reg-io-width = <4>;
+ dcd-override;
+ dsr-override;
+ cts-override;
+ ri-override;
};
Example with one clock:
diff --git a/Documentation/devicetree/bindings/submitting-patches.txt b/Documentation/devicetree/bindings/submitting-patches.txt
index 56742bc70218..7d44eae7ab0b 100644
--- a/Documentation/devicetree/bindings/submitting-patches.txt
+++ b/Documentation/devicetree/bindings/submitting-patches.txt
@@ -12,6 +12,9 @@ I. For patch submitters
devicetree@vger.kernel.org
+ and Cc: the DT maintainers. Use scripts/get_maintainer.pl to identify
+ all of the DT maintainers.
+
3) The Documentation/ portion of the patch should come in the series before
the code implementing the binding.
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 389ca1347a77..fae26d014aaf 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -20,6 +20,7 @@ amlogic Amlogic, Inc.
ams AMS AG
amstaos AMS-Taos Inc.
apm Applied Micro Circuits Corporation (APM)
+arasan Arasan Chip Systems
arm ARM Ltd.
armadeus ARMadeus Systems SARL
asahi-kasei Asahi Kasei Corp.
@@ -27,6 +28,7 @@ atmel Atmel Corporation
auo AU Optronics Corporation
avago Avago Technologies
avic Shanghai AVIC Optoelectronics Co., Ltd.
+axis Axis Communications AB
bosch Bosch Sensortec GmbH
brcm Broadcom Corporation
buffalo Buffalo, Inc.
diff --git a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
index f90e294d7631..a4d869744f59 100644
--- a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt
@@ -26,6 +26,11 @@ Optional properties:
- atmel,disable : Should be present if you want to disable the watchdog.
- atmel,idle-halt : Should be present if you want to stop the watchdog when
entering idle state.
+ CAUTION: This property should be used with care, it actually makes the
+ watchdog not counting when the CPU is in idle state, therefore the
+ watchdog reset time depends on mean CPU usage and will not reset at all
+ if the CPU stop working while it is in idle state, which is probably
+ not what you want.
- atmel,dbg-halt : Should be present if you want to stop the watchdog when
entering debug state.
diff --git a/Documentation/input/alps.txt b/Documentation/input/alps.txt
index a63e5e013a8c..92ae734c00c3 100644
--- a/Documentation/input/alps.txt
+++ b/Documentation/input/alps.txt
@@ -114,6 +114,9 @@ ALPS Absolute Mode - Protocol Version 2
byte 4: 0 y6 y5 y4 y3 y2 y1 y0
byte 5: 0 z6 z5 z4 z3 z2 z1 z0
+Protocol Version 2 DualPoint devices send standard PS/2 mouse packets for
+the DualPoint Stick.
+
Dualpoint device -- interleaved packet format
---------------------------------------------
@@ -127,6 +130,11 @@ Dualpoint device -- interleaved packet format
byte 7: 0 y6 y5 y4 y3 y2 y1 y0
byte 8: 0 z6 z5 z4 z3 z2 z1 z0
+Devices which use the interleaving format normally send standard PS/2 mouse
+packets for the DualPoint Stick + ALPS Absolute Mode packets for the
+touchpad, switching to the interleaved packet format when both the stick and
+the touchpad are used at the same time.
+
ALPS Absolute Mode - Protocol Version 3
---------------------------------------
diff --git a/Documentation/input/event-codes.txt b/Documentation/input/event-codes.txt
index c587a966413e..96705616f582 100644
--- a/Documentation/input/event-codes.txt
+++ b/Documentation/input/event-codes.txt
@@ -294,6 +294,12 @@ accordingly. This property does not affect kernel behavior.
The kernel does not provide button emulation for such devices but treats
them as any other INPUT_PROP_BUTTONPAD device.
+INPUT_PROP_ACCELEROMETER
+-------------------------
+Directional axes on this device (absolute and/or relative x, y, z) represent
+accelerometer data. All other axes retain their meaning. A device must not mix
+regular directional axes and accelerometer axes on the same event node.
+
Guidelines:
==========
The guidelines below ensure proper single-touch and multi-finger functionality.
diff --git a/Documentation/input/multi-touch-protocol.txt b/Documentation/input/multi-touch-protocol.txt
index 7b4f59c09ee2..b85d000faeb4 100644
--- a/Documentation/input/multi-touch-protocol.txt
+++ b/Documentation/input/multi-touch-protocol.txt
@@ -312,9 +312,12 @@ ABS_MT_TOOL_TYPE
The type of approaching tool. A lot of kernel drivers cannot distinguish
between different tool types, such as a finger or a pen. In such cases, the
-event should be omitted. The protocol currently supports MT_TOOL_FINGER and
-MT_TOOL_PEN [2]. For type B devices, this event is handled by input core;
-drivers should instead use input_mt_report_slot_state().
+event should be omitted. The protocol currently supports MT_TOOL_FINGER,
+MT_TOOL_PEN, and MT_TOOL_PALM [2]. For type B devices, this event is handled
+by input core; drivers should instead use input_mt_report_slot_state().
+A contact's ABS_MT_TOOL_TYPE may change over time while still touching the
+device, because the firmware may not be able to determine which tool is being
+used when it first appears.
ABS_MT_BLOB_ID
diff --git a/Documentation/power/suspend-and-interrupts.txt b/Documentation/power/suspend-and-interrupts.txt
index 2f9c5a5fcb25..8afb29a8604a 100644
--- a/Documentation/power/suspend-and-interrupts.txt
+++ b/Documentation/power/suspend-and-interrupts.txt
@@ -40,8 +40,10 @@ but also to IPIs and to some other special-purpose interrupts.
The IRQF_NO_SUSPEND flag is used to indicate that to the IRQ subsystem when
requesting a special-purpose interrupt. It causes suspend_device_irqs() to
-leave the corresponding IRQ enabled so as to allow the interrupt to work all
-the time as expected.
+leave the corresponding IRQ enabled so as to allow the interrupt to work as
+expected during the suspend-resume cycle, but does not guarantee that the
+interrupt will wake the system from a suspended state -- for such cases it is
+necessary to use enable_irq_wake().
Note that the IRQF_NO_SUSPEND flag affects the entire IRQ and not just one
user of it. Thus, if the IRQ is shared, all of the interrupt handlers installed
@@ -110,8 +112,9 @@ any special interrupt handling logic for it to work.
IRQF_NO_SUSPEND and enable_irq_wake()
-------------------------------------
-There are no valid reasons to use both enable_irq_wake() and the IRQF_NO_SUSPEND
-flag on the same IRQ.
+There are very few valid reasons to use both enable_irq_wake() and the
+IRQF_NO_SUSPEND flag on the same IRQ, and it is never valid to use both for the
+same device.
First of all, if the IRQ is not shared, the rules for handling IRQF_NO_SUSPEND
interrupts (interrupt handlers are invoked after suspend_device_irqs()) are
@@ -120,4 +123,13 @@ handlers are not invoked after suspend_device_irqs()).
Second, both enable_irq_wake() and IRQF_NO_SUSPEND apply to entire IRQs and not
to individual interrupt handlers, so sharing an IRQ between a system wakeup
-interrupt source and an IRQF_NO_SUSPEND interrupt source does not make sense.
+interrupt source and an IRQF_NO_SUSPEND interrupt source does not generally
+make sense.
+
+In rare cases an IRQ can be shared between a wakeup device driver and an
+IRQF_NO_SUSPEND user. In order for this to be safe, the wakeup device driver
+must be able to discern spurious IRQs from genuine wakeup events (signalling
+the latter to the core with pm_system_wakeup()), must use enable_irq_wake() to
+ensure that the IRQ will function as a wakeup source, and must request the IRQ
+with IRQF_COND_SUSPEND to tell the core that it meets these requirements. If
+these requirements are not met, it is not valid to use IRQF_COND_SUSPEND.