Merge branch 'asoc-4.21' into asoc-next

20 files changed, 727 insertions, 171 deletions

diff --git a/Documentation/devicetree/bindings/sound/ak4104.txt b/Documentation/devicetree/bindings/sound/ak4104.txt
index deca5e18f304..ae5f7f057dc3 100644
--- a/Documentation/devicetree/bindings/sound/ak4104.txt
+++ b/Documentation/devicetree/bindings/sound/ak4104.txt
@@ -12,8 +12,8 @@ Required properties:
 
 Optional properties:
 
-  - reset-gpio : a GPIO spec for the reset pin. If specified, it will be
-		 deasserted before communication to the device starts.
+  - reset-gpios : a GPIO spec for the reset pin. If specified, it will be
+		  deasserted before communication to the device starts.
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/sound/ak4118.txt b/Documentation/devicetree/bindings/sound/ak4118.txt
new file mode 100644
index 000000000000..6e11a2f7404c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ak4118.txt
@@ -0,0 +1,22 @@
+AK4118 S/PDIF transceiver
+
+This device supports I2C mode.
+
+Required properties:
+
+- compatible : "asahi-kasei,ak4118"
+- reg : The I2C address of the device for I2C
+- reset-gpios: A GPIO specifier for the reset pin
+- irq-gpios: A GPIO specifier for the IRQ pin
+
+Example:
+
+&i2c {
+	ak4118: ak4118@13 {
+		#sound-dai-cells = <0>;
+		compatible = "asahi-kasei,ak4118";
+		reg = <0x13>;
+		reset-gpios = <&gpio 0 GPIO_ACTIVE_LOW>
+		irq-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt
new file mode 100644
index 000000000000..2e6cb7d9b202
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/amlogic,axg-spdifin.txt
@@ -0,0 +1,22 @@
+* Amlogic Audio SPDIF Input
+
+Required properties:
+- compatible: 'amlogic,axg-spdifin'
+- interrupts: interrupt specifier for the spdif input.
+- clocks: list of clock phandle, one for each entry clock-names.
+- clock-names: should contain the following:
+  * "pclk" : peripheral clock.
+  * "refclk" : spdif input reference clock
+- #sound-dai-cells: must be 0.
+
+Example on the A113 SoC:
+
+spdifin: audio-controller@400 {
+	compatible = "amlogic,axg-spdifin";
+	reg = <0x0 0x400 0x0 0x30>;
+	#sound-dai-cells = <0>;
+	interrupts = <GIC_SPI 87 IRQ_TYPE_EDGE_RISING>;
+	clocks = <&clkc_audio AUD_CLKID_SPDIFIN>,
+		 <&clkc_audio AUD_CLKID_SPDIFIN_CLK>;
+	clock-names = "pclk", "refclk";
+};
diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card.txt b/Documentation/devicetree/bindings/sound/audio-graph-card.txt
index 7e63e53a901c..269682619a70 100644
--- a/Documentation/devicetree/bindings/sound/audio-graph-card.txt
+++ b/Documentation/devicetree/bindings/sound/audio-graph-card.txt
@@ -32,7 +32,9 @@ Required properties:
 Optional properties:
 - pa-gpios: GPIO used to control external amplifier.
 
+-----------------------
 Example: Single DAI case
+-----------------------
 
 	sound_card {
 		compatible = "audio-graph-card";
@@ -61,7 +63,9 @@ Example: Single DAI case
 		};
 	};
 
+-----------------------
 Example: Multi DAI case
+-----------------------
 
 	sound-card {
 		compatible = "audio-graph-card";
@@ -130,3 +134,204 @@ Example: Multi DAI case
 		};
 	};
 
+
+-----------------------
+Example: Sampling Rate Conversion
+-----------------------
+
+	sound_card {
+		compatible = "audio-graph-card";
+
+		label = "sound-card";
+		prefix = "codec";
+		routing = "codec Playback", "DAI0 Playback",
+			  "DAI0 Capture",   "codec Capture";
+		convert-rate = <48000>;
+
+		dais = <&cpu_port>;
+	};
+
+	audio-codec {
+		...
+		port {
+			codec_endpoint: endpoint {
+				remote-endpoint = <&cpu_endpoint>;
+			};
+		};
+	};
+
+	dai-controller {
+		...
+		cpu_port: port {
+			cpu_endpoint: endpoint {
+				remote-endpoint = <&codec_endpoint>;
+
+				dai-format = "left_j";
+				...
+			};
+		};
+	};
+
+-----------------------
+Example: 2 CPU 1 Codec (Mixing)
+-----------------------
+
+	sound_card {
+		compatible = "audio-graph-card";
+
+		label = "sound-card";
+		routing = "codec Playback", "DAI0 Playback",
+			  "codec Playback", "DAI1 Playback",
+			  "DAI0 Capture",   "codec Capture";
+
+		dais = <&cpu_port>;
+	};
+
+	audio-codec {
+		...
+
+		audio-graph-card,prefix = "codec";
+		audio-graph-card,convert-rate = <48000>;
+		port {
+			reg = <0>;
+			codec_endpoint0: endpoint@0 {
+				remote-endpoint = <&cpu_endpoint0>;
+			};
+			codec_endpoint1: endpoint@1 {
+				remote-endpoint = <&cpu_endpoint1>;
+			};
+		};
+	};
+
+	dai-controller {
+		...
+		cpu_port: port {
+			cpu_endpoint0: endpoint@0 {
+				remote-endpoint = <&codec_endpoint0>;
+
+				dai-format = "left_j";
+				...
+			};
+			cpu_endpoint1: endpoint@1 {
+				remote-endpoint = <&codec_endpoint1>;
+
+				dai-format = "left_j";
+				...
+			};
+		};
+	};
+
+-----------------------
+Example: Multi DAI with DPCM
+-----------------------
+
+	CPU0 ------ ak4613
+	CPU1 ------ HDMI
+	CPU2 ------ PCM3168A-p	/* DPCM 1ch/2ch */
+	CPU3 --/		/* DPCM 3ch/4ch */
+	CPU4 --/		/* DPCM 5ch/6ch */
+	CPU5 --/		/* DPCM 7ch/8ch */
+	CPU6 ------ PCM3168A-c
+
+	sound_card: sound {
+		compatible = "audio-graph-card";
+
+		label = "sound-card";
+
+		routing =	"pcm3168a Playback", "DAI2 Playback",
+				"pcm3168a Playback", "DAI3 Playback",
+				"pcm3168a Playback", "DAI4 Playback",
+				"pcm3168a Playback", "DAI5 Playback";
+
+		dais = <&snd_port0	/* ak4613 */
+			&snd_port1	/* HDMI0  */
+			&snd_port2	/* pcm3168a playback */
+			&snd_port3	/* pcm3168a capture  */
+			>;
+	};
+
+	ak4613: codec@10 {
+		...
+		port {
+			ak4613_endpoint: endpoint {
+				remote-endpoint = <&rsnd_endpoint0>;
+			};
+		};
+	};
+
+	pcm3168a: audio-codec@44 {
+		...
+		audio-graph-card,prefix = "pcm3168a";
+		audio-graph-card,convert-channels = <8>; /* TDM Split */
+		ports {
+			port@0 {
+				reg = <0>;
+				pcm3168a_endpoint_p1: endpoint@1 {
+					remote-endpoint = <&rsnd_endpoint2>;
+					...
+				};
+				pcm3168a_endpoint_p2: endpoint@2 {
+					remote-endpoint = <&rsnd_endpoint3>;
+					...
+				};
+				pcm3168a_endpoint_p3: endpoint@3 {
+					remote-endpoint = <&rsnd_endpoint4>;
+					...
+				};
+				pcm3168a_endpoint_p4: endpoint@4 {
+					remote-endpoint = <&rsnd_endpoint5>;
+					...
+				};
+			};
+			port@1 {
+				reg = <1>;
+				pcm3168a_endpoint_c: endpoint {
+					remote-endpoint = <&rsnd_endpoint6>;
+					...
+				};
+			};
+		};
+	};
+
+	&sound {
+		ports {
+			snd_port0: port@0 {
+				rsnd_endpoint0: endpoint {
+					remote-endpoint = <&ak4613_endpoint>;
+					...
+				};
+			};
+			snd_port1: port@1 {
+				rsnd_endpoint1: endpoint {
+					remote-endpoint = <&dw_hdmi0_snd_in>;
+					...
+				};
+			};
+			snd_port2: port@2 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				rsnd_endpoint2: endpoint@2 {
+					remote-endpoint = <&pcm3168a_endpoint_p1>;
+					...
+				};
+				rsnd_endpoint3: endpoint@3 {
+					remote-endpoint = <&pcm3168a_endpoint_p2>;
+					...
+				};
+				rsnd_endpoint4: endpoint@4 {
+					remote-endpoint = <&pcm3168a_endpoint_p3>;
+					...
+				};
+				rsnd_endpoint5: endpoint@5 {
+					remote-endpoint = <&pcm3168a_endpoint_p4>;
+					...
+				};
+			};
+			snd_port3: port@6 {
+				rsnd_endpoint6: endpoint {
+					remote-endpoint = <&pcm3168a_endpoint_c>;
+					...
+				};
+			};
+		};
+	};
diff --git a/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt b/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt
index 441dd6f29df1..62d42768a00b 100644
--- a/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt
+++ b/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt
@@ -77,11 +77,9 @@ Example 2. 2 CPU 1 Codec (Mixing)
 		compatible = "audio-graph-scu-card";
 
 		label = "sound-card";
-		prefix = "codec";
 		routing = "codec Playback", "DAI0 Playback",
 			  "codec Playback", "DAI1 Playback",
 			  "DAI0 Capture",   "codec Capture";
-		convert-rate = <48000>;
 
 		dais = <&cpu_port0
 			&cpu_port1>;
@@ -90,6 +88,8 @@ Example 2. 2 CPU 1 Codec (Mixing)
 	audio-codec {
 		...
 
+		audio-graph-card,prefix = "codec";
+		audio-graph-card,convert-rate = <48000>;
 		port {
 			codec_endpoint0: endpoint {
 				remote-endpoint = <&cpu_endpoint0>;
diff --git a/Documentation/devicetree/bindings/sound/cs4270.txt b/Documentation/devicetree/bindings/sound/cs4270.txt
index 6b222f9b8ef5..c33770ec4c3c 100644
--- a/Documentation/devicetree/bindings/sound/cs4270.txt
+++ b/Documentation/devicetree/bindings/sound/cs4270.txt
@@ -10,8 +10,8 @@ Required properties:
 
 Optional properties:
 
-  - reset-gpio : a GPIO spec for the reset pin. If specified, it will be
-		 deasserted before communication to the codec starts.
+  - reset-gpios : a GPIO spec for the reset pin. If specified, it will be
+		  deasserted before communication to the codec starts.
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt
index 46bc9829c71a..b279b6072bd5 100644
--- a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt
+++ b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt
@@ -30,6 +30,11 @@ Optional properties:
 - ti,hwmods : Must be "mcasp<n>", n is controller instance starting 0
 - tx-num-evt : FIFO levels.
 - rx-num-evt : FIFO levels.
+- dismod : Specify the drive on TX pin during inactive slots
+	0 : 3-state
+	2 : logic low
+	3 : logic high
+	Defaults to 'logic low' when the property is not present
 - sram-size-playback : size of sram to be allocated during playback
 - sram-size-capture  : size of sram to be allocated during capture
 - interrupts : Interrupt numbers for McASP
diff --git a/Documentation/devicetree/bindings/sound/dmic.txt b/Documentation/devicetree/bindings/sound/dmic.txt
index e957b4136716..32e871037269 100644
--- a/Documentation/devicetree/bindings/sound/dmic.txt
+++ b/Documentation/devicetree/bindings/sound/dmic.txt
@@ -9,6 +9,7 @@ Optional properties:
 	- dmicen-gpios: GPIO specifier for dmic to control start and stop
 	- num-channels: Number of microphones on this DAI
 	- wakeup-delay-ms: Delay (in ms) after enabling the DMIC
+	- modeswitch-delay-ms: Delay (in ms) to complete DMIC mode switch
 
 Example node:
 
@@ -17,4 +18,5 @@ Example node:
 		dmicen-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
 		num-channels = <1>;
 		wakeup-delay-ms <50>;
+		modeswitch-delay-ms <35>;
 	};
diff --git a/Documentation/devicetree/bindings/sound/fsl-sai.txt b/Documentation/devicetree/bindings/sound/fsl-sai.txt
index dd9e59738e08..2e726b983845 100644
--- a/Documentation/devicetree/bindings/sound/fsl-sai.txt
+++ b/Documentation/devicetree/bindings/sound/fsl-sai.txt
@@ -35,13 +35,13 @@ Required properties:
 
   - fsl,sai-synchronous-rx: This is a boolean property. If present, indicating
 			  that SAI will work in the synchronous mode (sync Tx
-			  with Rx) which means both the transimitter and the
+			  with Rx) which means both the transmitter and the
 			  receiver will send and receive data by following
 			  receiver's bit clocks and frame sync clocks.
 
   - fsl,sai-asynchronous: This is a boolean property. If present, indicating
 			  that SAI will work in the asynchronous mode, which
-			  means both transimitter and receiver will send and
+			  means both transmitter and receiver will send and
 			  receive data by following their own bit clocks and
 			  frame sync clocks separately.
 
@@ -58,8 +58,8 @@ Optional properties (for mx6ul):
 Note:
 - If both fsl,sai-asynchronous and fsl,sai-synchronous-rx are absent, the
   default synchronous mode (sync Rx with Tx) will be used, which means both
-  transimitter and receiver will send and receive data by following clocks
-  of transimitter.
+  transmitter and receiver will send and receive data by following clocks
+  of transmitter.
 - fsl,sai-asynchronous and fsl,sai-synchronous-rx are exclusive.
 
 Example:
diff --git a/Documentation/devicetree/bindings/sound/omap-mcpdm.txt b/Documentation/devicetree/bindings/sound/omap-mcpdm.txt
index 5f4e68ca228c..ff98a0cb5b3f 100644
--- a/Documentation/devicetree/bindings/sound/omap-mcpdm.txt
+++ b/Documentation/devicetree/bindings/sound/omap-mcpdm.txt
@@ -7,6 +7,8 @@ Required properties:
        <L3 interconnect address, size>;
 - interrupts: Interrupt number for McPDM
 - ti,hwmods: Name of the hwmod associated to the McPDM
+- clocks:  phandle for the pdmclk provider, likely <&twl6040>
+- clock-names: Must be "pdmclk"
 
 Example:
 
@@ -18,3 +20,11 @@ mcpdm: mcpdm@40132000 {
 	interrupt-parent = <&gic>;
 	ti,hwmods = "mcpdm";
 };
+
+In board DTS file the pdmclk needs to be added:
+
+&mcpdm {
+	clocks = <&twl6040>;
+	clock-names = "pdmclk";
+	status = "okay";
+};
diff --git a/Documentation/devicetree/bindings/sound/pcm3060.txt b/Documentation/devicetree/bindings/sound/pcm3060.txt
index 90fcb8523099..97de66932d44 100644
--- a/Documentation/devicetree/bindings/sound/pcm3060.txt
+++ b/Documentation/devicetree/bindings/sound/pcm3060.txt
@@ -9,9 +9,15 @@ Required properties:
 - reg : the I2C address of the device for I2C, the chip select
         number for SPI.
 
+Optional properties:
+
+- ti,out-single-ended: "true" if output is single-ended;
+                       "false" or not specified if output is differential.
+
 Examples:
 
 	pcm3060: pcm3060@46 {
 		 compatible = "ti,pcm3060";
 		 reg = <0x46>;
+		 ti,out-single-ended = "true";
 	};
diff --git a/Documentation/devicetree/bindings/sound/qcom,q6asm.txt b/Documentation/devicetree/bindings/sound/qcom,q6asm.txt
index f9c7bd8c1bc0..9f5378c51686 100644
--- a/Documentation/devicetree/bindings/sound/qcom,q6asm.txt
+++ b/Documentation/devicetree/bindings/sound/qcom,q6asm.txt
@@ -27,6 +27,28 @@ used by the apr service device.
 	Value type: <u32>
 	Definition: Must be 1
 
+== ASM DAI is subnode of "dais" and represent a dai, it includes board specific
+configuration of each dai. Must contain the following properties.
+
+- reg
+	Usage: required
+	Value type: <u32>
+	Definition: Must be dai id
+
+- direction:
+	Usage: Required for Compress offload dais
+	Value type: <u32>
+	Definition: Specifies the direction of the dai stream
+			0 for both tx and rx
+			1 for only tx (Capture/Encode)
+			2 for only rx (Playback/Decode)
+
+- is-compress-dai:
+	Usage: Required for Compress offload dais
+	Value type: <boolean>
+	Definition: present for Compress offload dais
+
+
 = EXAMPLE
 
 q6asm@7 {
@@ -35,5 +57,10 @@ q6asm@7 {
 	q6asmdai: dais {
 		compatible = "qcom,q6asm-dais";
 		#sound-dai-cells = <1>;
+		mm@0 {
+			reg = <0>;
+			direction = <2>;
+			is-compress-dai;
+		};
 	};
 };
diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
index d92b705e7917..648d43e1b1e9 100644
--- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
+++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt
@@ -39,15 +39,7 @@ This is example of
 Playback: [MEM] -> [SRC2] -> [DVC0] -> [SSIU0/SSI0] -> [codec]
 Capture:  [MEM] <- [DVC1] <- [SRC3] <- [SSIU1/SSI1] <- [codec]
 
-	&rcar_sound {
-		...
-		rcar_sound,dai {
-			dai0 {
-				playback = <&ssi0 &src2 &dvc0>;
-				capture  = <&ssi1 &src3 &dvc1>;
-			};
-		};
-	};
+see "Example: simple sound card"
 
 You can use below.
 ${LINUX}/arch/arm/boot/dts/r8a7790.dts can be good example.
@@ -83,29 +75,8 @@ SRC can convert [xx]Hz to [yy]Hz. Then, it has below 2 modes
 **     Asynchronous mode
 ------------------
 
-You need to use "simple-scu-audio-card" sound card for it.
-example)
-
-	sound {
-		compatible = "simple-scu-audio-card";
-		...
-		/*
-		 * SRC Asynchronous mode setting
-		 * Playback:
-		 * All input data will be converted to 48kHz
-		 * Capture:
-		 * Inputed 48kHz data will be converted to
-		 * system specified Hz
-		 */
-		simple-audio-card,convert-rate = <48000>;
-		...
-		simple-audio-card,cpu {
-			sound-dai = <&rcar_sound>;
-		};
-		simple-audio-card,codec {
-			...
-		};
-	};
+You need to use "simple-scu-audio-card" or "audio-graph-scu-card" for it.
+see "Example: simple sound card for Asynchronous mode"
 
 ------------------
 **     Synchronous mode
@@ -141,26 +112,8 @@ For more detail information, see below
 	${LINUX}/sound/soc/sh/rcar/ctu.c
 	 - comment of header
 
-You need to use "simple-scu-audio-card" sound card for it.
-example)
-
-	sound {
-		compatible = "simple-scu-audio-card";
-		...
-		/*
-		 * CTU setting
-		 * All input data will be converted to 2ch
-		 * as output data
-		 */
-		simple-audio-card,convert-channels = <2>;
-		...
-		simple-audio-card,cpu {
-			sound-dai = <&rcar_sound>;
-		};
-		simple-audio-card,codec {
-			...
-		};
-	};
+You need to use "simple-scu-audio-card" or "audio-graph-scu-card" for it.
+see "Example: simple sound card for channel convert"
 
 Ex) Exchange output channel
  Input -> Output
@@ -190,42 +143,13 @@ and these sounds will be merged by MIX.
 	aplay -D plughw:0,0 xxxx.wav &
 	aplay -D plughw:0,1 yyyy.wav
 
-You need to use "simple-scu-audio-card" sound card for it.
+You need to use "simple-scu-audio-card" or "audio-graph-scu-card" for it.
 Ex)
 	[MEM] -> [SRC1] -> [CTU02] -+-> [MIX0] -> [DVC0] -> [SSI0]
 	                            |
 	[MEM] -> [SRC2] -> [CTU03] -+
 
-	sound {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		compatible = "simple-scu-audio-card";
-		...
-		simple-audio-card,cpu@0 {
-			reg = <0>;
-			sound-dai = <&rcar_sound 0>;
-		};
-		simple-audio-card,cpu@1 {
-			reg = <1>;
-			sound-dai = <&rcar_sound 1>;
-		};
-		simple-audio-card,codec {
-			...
-		};
-	};
-
-	&rcar_sound {
-		...
-		rcar_sound,dai {
-			dai0 {
-				playback = <&src1 &ctu02 &mix0 &dvc0 &ssi0>;
-			};
-			dai1 {
-				playback = <&src2 &ctu03 &mix0 &dvc0 &ssi0>;
-			};
-		};
-	};
+see "Example: simple sound card for MIXer"
 
 =============================================
 * DVC (Digital Volume and Mute Function)
@@ -257,15 +181,31 @@ Volume Ramp
 * SSIU (Serial Sound Interface Unit)
 =============================================
 
-There is no DT settings for SSIU, because SSIU will be automatically
-selected via SSI.
 SSIU can avoid some under/over run error, because it has some buffer.
 But you can't use it if SSI was PIO mode.
-In DMA mode, you can select not to use SSIU by using "no-busif" on DT.
+In DMA mode, you can select not to use SSIU by using "no-busif" via SSI.
 
-	&ssi0 {
-		no-busif;
-	};
+SSIU handles BUSIF which will be used for TDM Split mode.
+This driver is assuming that audio-graph card will be used.
+
+TDM Split mode merges 4 sounds. You can see 4 sound interface on system,
+and these sounds will be merged SSIU/SSI.
+
+	aplay -D plughw:0,0 xxxx.wav &
+	aplay -D plughw:0,1 xxxx.wav &
+	aplay -D plughw:0,2 xxxx.wav &
+	aplay -D plughw:0,3 xxxx.wav
+
+	          2ch                     8ch
+	[MEM] -> [SSIU 30] -+-> [SSIU 3] --> [Codec]
+	          2ch       |
+	[MEM] -> [SSIU 31] -+
+	          2ch       |
+	[MEM] -> [SSIU 32] -+
+	          2ch       |
+	[MEM] -> [SSIU 33] -+
+
+see "Example: simple sound card for TDM Split"
 
 =============================================
 * SSI (Serial Sound Interface)
@@ -304,14 +244,7 @@ This is example if SSI1 want to share WS pin with SSI0
 You can use Multi-SSI.
 This is example of SSI0/SSI1/SSI2 (= for 6ch)
 
-	&rcar_sound {
-		...
-		rcar_sound,dai {
-			dai0 {
-				playback = <&ssi0 &ssi1 &ssi2 &src0 &dvc0>;
-			};
-		};
-	};
+see "Example: simple sound card for Multi channel"
 
 ** TDM-SSI
 
@@ -319,19 +252,7 @@ You can use TDM with SSI.
 This is example of TDM 6ch.
 Driver can automatically switches TDM <-> stereo mode in this case.
 
-	rsnd_tdm: sound {
-		compatible = "simple-audio-card";
-		...
-		simple-audio-card,cpu {
-			/* system can use TDM 6ch */
-			dai-tdm-slot-num = <6>;
-			sound-dai = <&rcar_sound>;
-		};
-		simple-audio-card,codec {
-			...
-		};
-	};
-
+see "Example: simple sound card for TDM"
 
 =============================================
 Required properties:
@@ -346,6 +267,7 @@ Required properties:
 				    - "renesas,rcar_sound-r8a7744" (RZ/G1N)
 				    - "renesas,rcar_sound-r8a7745" (RZ/G1E)
 				    - "renesas,rcar_sound-r8a774a1" (RZ/G2M)
+				    - "renesas,rcar_sound-r8a774c0" (RZ/G2E)
 				    - "renesas,rcar_sound-r8a7778" (R-Car M1A)
 				    - "renesas,rcar_sound-r8a7779" (R-Car H1)
 				    - "renesas,rcar_sound-r8a7790" (R-Car H2)
@@ -356,6 +278,7 @@ Required properties:
 				    - "renesas,rcar_sound-r8a7796" (R-Car M3-W)
 				    - "renesas,rcar_sound-r8a77965" (R-Car M3-N)
 				    - "renesas,rcar_sound-r8a77990" (R-Car E3)
+				    - "renesas,rcar_sound-r8a77995" (R-Car D3)
 - reg				: Should contain the register physical address.
 				  required register is
 				   SRU/ADG/SSI      if generation1
@@ -363,6 +286,9 @@ Required properties:
 - rcar_sound,ssi		: Should contain SSI feature.
 				  The number of SSI subnode should be same as HW.
 				  see below for detail.
+- rcar_sound,ssiu		: Should contain SSIU feature.
+				  The number of SSIU subnode should be same as HW.
+				  see below for detail.
 - rcar_sound,src		: Should contain SRC feature.
 				  The number of SRC subnode should be same as HW.
 				  see below for detail.
@@ -402,8 +328,13 @@ SSI subnode properties:
 - no-busif			: BUSIF is not ussed when [mem -> SSI] via DMA case
 - dma				: Should contain Audio DMAC entry
 - dma-names			: SSI  case "rx"  (=playback), "tx"  (=capture)
+				  Deprecated: see SSIU subnode properties
 				  SSIU case "rxu" (=playback), "txu" (=capture)
 
+SSIU subnode properties:
+- dma				: Should contain Audio DMAC entry
+- dma-names			: "rx" (=playback), "tx" (=capture)
+
 SRC subnode properties:
 - dma				: Should contain Audio DMAC entry
 - dma-names			: "rx" (=playback), "tx" (=capture)
@@ -532,56 +463,55 @@ rcar_sound: sound@ec500000 {
 		};
 	};
 
+	rcar_sound,ssiu {
+		ssiu00: ssiu-0 {
+			dmas = <&audma0 0x15>, <&audma1 0x16>;
+			dma-names = "rx", "tx";
+		};
+		ssiu01: ssiu-1 {
+			dmas = <&audma0 0x35>, <&audma1 0x36>;
+			dma-names = "rx", "tx";
+		};
+
+		...
+
+		ssiu95: ssiu-49 {
+			dmas = <&audma0 0xA5>, <&audma1 0xA6>;
+			dma-names = "rx", "tx";
+		};
+		ssiu96: ssiu-50 {
+			dmas = <&audma0 0xA7>, <&audma1 0xA8>;
+			dma-names = "rx", "tx";
+		};
+		ssiu97: ssiu-51 {
+			dmas = <&audma0 0xA9>, <&audma1 0xAA>;
+			dma-names = "rx", "tx";
+		};
+	};
+
 	rcar_sound,ssi {
 		ssi0: ssi-0 {
 			interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x01>, <&audma1 0x02>, <&audma0 0x15>, <&audma1 0x16>;
-			dma-names = "rx", "tx", "rxu", "txu";
+			dmas = <&audma0 0x01>, <&audma1 0x02>;
+			dma-names = "rx", "tx";
 		};
 		ssi1: ssi-1 {
 			interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x03>, <&audma1 0x04>, <&audma0 0x49>, <&audma1 0x4a>;
-			dma-names = "rx", "tx", "rxu", "txu";
-		};
-		ssi2: ssi-2 {
-			interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x05>, <&audma1 0x06>, <&audma0 0x63>, <&audma1 0x64>;
-			dma-names = "rx", "tx", "rxu", "txu";
-		};
-		ssi3: ssi-3 {
-			interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x07>, <&audma1 0x08>, <&audma0 0x6f>, <&audma1 0x70>;
-			dma-names = "rx", "tx", "rxu", "txu";
-		};
-		ssi4: ssi-4 {
-			interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x09>, <&audma1 0x0a>, <&audma0 0x71>, <&audma1 0x72>;
-			dma-names = "rx", "tx", "rxu", "txu";
-		};
-		ssi5: ssi-5 {
-			interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x0b>, <&audma1 0x0c>, <&audma0 0x73>, <&audma1 0x74>;
-			dma-names = "rx", "tx", "rxu", "txu";
-		};
-		ssi6: ssi-6 {
-			interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x0d>, <&audma1 0x0e>, <&audma0 0x75>, <&audma1 0x76>;
-			dma-names = "rx", "tx", "rxu", "txu";
-		};
-		ssi7: ssi-7 {
-			interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x0f>, <&audma1 0x10>, <&audma0 0x79>, <&audma1 0x7a>;
-			dma-names = "rx", "tx", "rxu", "txu";
+			dmas = <&audma0 0x03>, <&audma1 0x04>;
+			dma-names = "rx", "tx";
 		};
+
+		...
+
 		ssi8: ssi-8 {
 			interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x11>, <&audma1 0x12>, <&audma0 0x7b>, <&audma1 0x7c>;
-			dma-names = "rx", "tx", "rxu", "txu";
+			dmas = <&audma0 0x11>, <&audma1 0x12>;
+			dma-names = "rx", "tx";
 		};
 		ssi9: ssi-9 {
 			interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>;
-			dmas = <&audma0 0x13>, <&audma1 0x14>, <&audma0 0x7d>, <&audma1 0x7e>;
-			dma-names = "rx", "tx", "rxu", "txu";
+			dmas = <&audma0 0x13>, <&audma1 0x14>;
+			dma-names = "rx", "tx";
 		};
 	};
 
@@ -647,25 +577,174 @@ Example: simple sound card
 };
 
 =============================================
+Example: simple sound card for Asynchronous mode
+=============================================
+
+sound {
+	compatible = "simple-scu-audio-card";
+	...
+	/*
+	 * SRC Asynchronous mode setting
+	 * Playback:
+	 * All input data will be converted to 48kHz
+	 * Capture:
+	 * Inputed 48kHz data will be converted to
+	 * system specified Hz
+	 */
+	simple-audio-card,convert-rate = <48000>;
+	...
+	simple-audio-card,cpu {
+		sound-dai = <&rcar_sound>;
+	};
+	simple-audio-card,codec {
+		...
+	};
+};
+
+=============================================
+Example: simple sound card for channel convert
+=============================================
+
+sound {
+	compatible = "simple-scu-audio-card";
+	...
+	/*
+	 * CTU setting
+	 * All input data will be converted to 2ch
+	 * as output data
+	 */
+	simple-audio-card,convert-channels = <2>;
+	...
+	simple-audio-card,cpu {
+		sound-dai = <&rcar_sound>;
+	};
+	simple-audio-card,codec {
+		...
+	};
+};
+
+=============================================
+Example: simple sound card for MIXer
+=============================================
+
+sound {
+	compatible = "simple-scu-audio-card";
+	...
+	simple-audio-card,cpu@0 {
+		sound-dai = <&rcar_sound 0>;
+	};
+	simple-audio-card,cpu@1 {
+		sound-dai = <&rcar_sound 1>;
+	};
+	simple-audio-card,codec {
+		...
+	};
+};
+
+&rcar_sound {
+	...
+	rcar_sound,dai {
+		dai0 {
+			playback = <&src1 &ctu02 &mix0 &dvc0 &ssi0>;
+		};
+		dai1 {
+			playback = <&src2 &ctu03 &mix0 &dvc0 &ssi0>;
+		};
+	};
+};
+
+=============================================
 Example: simple sound card for TDM
 =============================================
 
-	rsnd_tdm: sound {
-		compatible = "simple-audio-card";
+rsnd_tdm: sound {
+	compatible = "simple-audio-card";
 
-		simple-audio-card,format = "left_j";
-		simple-audio-card,bitclock-master = <&sndcodec>;
-		simple-audio-card,frame-master = <&sndcodec>;
+	simple-audio-card,format = "left_j";
+	simple-audio-card,bitclock-master = <&sndcodec>;
+	simple-audio-card,frame-master = <&sndcodec>;
 
-		sndcpu: simple-audio-card,cpu {
-			sound-dai = <&rcar_sound>;
-			dai-tdm-slot-num = <6>;
+	sndcpu: simple-audio-card,cpu {
+		sound-dai = <&rcar_sound>;
+		dai-tdm-slot-num = <6>;
+	};
+
+	sndcodec: simple-audio-card,codec {
+		sound-dai = <&xxx>;
+	};
+};
+
+=============================================
+Example: simple sound card for TDM Split
+=============================================
+
+sound_card: sound {
+	compatible = "audio-graph-scu-card";
+	prefix = "xxxx";
+	routing = "xxxx Playback", "DAI0 Playback",
+		  "xxxx Playback", "DAI1 Playback",
+		  "xxxx Playback", "DAI2 Playback",
+		  "xxxx Playback", "DAI3 Playback";
+	convert-channels = <8>; /* TDM Split */
+
+	dais = <&rsnd_port0     /* playback ch1/ch2 */
+		&rsnd_port1     /* playback ch3/ch4 */
+		&rsnd_port2     /* playback ch5/ch6 */
+		&rsnd_port3     /* playback ch7/ch8 */
+		>;
+};
+
+audio-codec {
+	...
+	port {
+		codec_0: endpoint@1 {
+			remote-endpoint = <&rsnd_ep0>;
+		};
+		codec_1: endpoint@2 {
+			remote-endpoint = <&rsnd_ep1>;
+		};
+		codec_2: endpoint@3 {
+			remote-endpoint = <&rsnd_ep2>;
+		};
+		codec_3: endpoint@4 {
+			remote-endpoint = <&rsnd_ep3>;
 		};
+	};
+};
 
-		sndcodec: simple-audio-card,codec {
-			sound-dai = <&xxx>;
+&rcar_sound {
+	...
+	ports {
+		rsnd_port0: port@0 {
+			rsnd_ep0: endpoint {
+				remote-endpoint = <&codec_0>;
+				...
+				playback = <&ssiu30 &ssi3>;
+			};
+		};
+		rsnd_port1: port@1 {
+			rsnd_ep1: endpoint {
+				remote-endpoint = <&codec_1>;
+				...
+				playback = <&ssiu31 &ssi3>;
+			};
+		};
+		rsnd_port2: port@2 {
+			rsnd_ep2: endpoint {
+				remote-endpoint = <&codec_2>;
+				...
+				playback = <&ssiu32 &ssi3>;
+			};
+		};
+		rsnd_port3: port@3 {
+			rsnd_ep3: endpoint {
+				remote-endpoint = <&codec_3>;
+				...
+				playback = <&ssiu33 &ssi3>;
+			};
 		};
 	};
+};
 
 =============================================
 Example: simple sound card for Multi channel
diff --git a/Documentation/devicetree/bindings/sound/rt5631.txt b/Documentation/devicetree/bindings/sound/rt5631.txt
index 92b986ca337b..56bc85232c49 100644
--- a/Documentation/devicetree/bindings/sound/rt5631.txt
+++ b/Documentation/devicetree/bindings/sound/rt5631.txt
@@ -35,14 +35,14 @@ Pins on the device (for linking into audio routes):
 
 Example:
 
-alc5631: alc5631@1a {
+alc5631: audio-codec@1a {
 	compatible = "realtek,alc5631";
 	reg = <0x1a>;
 };
 
 or
 
-rt5631: rt5631@1a {
+rt5631: audio-codec@1a {
 	compatible = "realtek,rt5631";
 	reg = <0x1a>;
 };
diff --git a/Documentation/devicetree/bindings/sound/rt5663.txt b/Documentation/devicetree/bindings/sound/rt5663.txt
index 23386446c63d..2a55e9133408 100644
--- a/Documentation/devicetree/bindings/sound/rt5663.txt
+++ b/Documentation/devicetree/bindings/sound/rt5663.txt
@@ -10,6 +10,10 @@ Required properties:
 
 - interrupts : The CODEC's interrupt output.
 
+- avdd-supply: Power supply for AVDD, providing 1.8V.
+
+- cpvdd-supply: Power supply for CPVDD, providing 3.5V.
+
 Optional properties:
 
 - "realtek,dc_offset_l_manual"
@@ -51,4 +55,6 @@ rt5663: codec@12 {
 	compatible = "realtek,rt5663";
 	reg = <0x12>;
 	interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+	avdd-supply = <&pp1800_a_alc5662>;
+	cpvdd-supply = <&pp3500_a_alc5662>;
 };
diff --git a/Documentation/devicetree/bindings/sound/simple-amplifier.txt b/Documentation/devicetree/bindings/sound/simple-amplifier.txt
index 8647edae7af0..7182ac4f1e65 100644
--- a/Documentation/devicetree/bindings/sound/simple-amplifier.txt
+++ b/Documentation/devicetree/bindings/sound/simple-amplifier.txt
@@ -4,9 +4,14 @@ Required properties:
 - compatible : "dioo,dio2125" or "simple-audio-amplifier"
 - enable-gpios : the gpio connected to the enable pin of the simple amplifier
 
+Optional properties:
+- VCC-supply   : power supply for the device, as covered
+                 in Documentation/devicetree/bindings/regulator/regulator.txt
+
 Example:
 
 amp: analog-amplifier {
 	compatible = "simple-audio-amplifier";
+	VCC-supply = <&regulator>;
 	enable-gpios = <&gpio GPIOH_3 0>;
 };
diff --git a/Documentation/devicetree/bindings/sound/simple-card.txt b/Documentation/devicetree/bindings/sound/simple-card.txt
index a4c72d09cd45..4629c8f8a6b6 100644
--- a/Documentation/devicetree/bindings/sound/simple-card.txt
+++ b/Documentation/devicetree/bindings/sound/simple-card.txt
@@ -95,7 +95,9 @@ Optional CPU/CODEC subnodes properties:
 					  initialization. It is useful for some aCPUs with
 					  fixed clocks.
 
+-------------------------------------------
 Example 1 - single DAI link:
+-------------------------------------------
 
 sound {
 	compatible = "simple-audio-card";
@@ -138,7 +140,9 @@ sh_fsi2: sh_fsi2@ec230000 {
 	interrupts = <0 146 0x4>;
 };
 
+-------------------------------------------
 Example 2 - many DAI links:
+-------------------------------------------
 
 sound {
 	compatible = "simple-audio-card";
@@ -176,8 +180,10 @@ sound {
 	};
 };
 
+-------------------------------------------
 Example 3 - route audio from IMX6 SSI2 through TLV320DAC3100 codec
 through TPA6130A2 amplifier to headphones:
+-------------------------------------------
 
 &i2c0 {
 	codec: tlv320dac3100@18 {
@@ -210,3 +216,134 @@ sound {
 		clocks = ...
 	};
 };
+
+-------------------------------------------
+Example 4. Sampling Rate Conversion
+-------------------------------------------
+
+sound {
+	compatible = "simple-audio-card";
+
+	simple-audio-card,name = "rsnd-ak4643";
+	simple-audio-card,format = "left_j";
+	simple-audio-card,bitclock-master = <&sndcodec>;
+	simple-audio-card,frame-master = <&sndcodec>;
+
+	simple-audio-card,convert-rate = <48000>;
+
+	simple-audio-card,prefix = "ak4642";
+	simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback",
+			"DAI0 Capture", "ak4642 Capture";
+
+	sndcpu: simple-audio-card,cpu {
+		sound-dai = <&rcar_sound>;
+	};
+
+	sndcodec: simple-audio-card,codec {
+		sound-dai = <&ak4643>;
+		system-clock-frequency = <11289600>;
+	};
+};
+
+-------------------------------------------
+Example 5. 2 CPU 1 Codec (Mixing)
+-------------------------------------------
+sound {
+	compatible = "simple-audio-card";
+
+	simple-audio-card,name = "rsnd-ak4643";
+	simple-audio-card,format = "left_j";
+	simple-audio-card,bitclock-master = <&dpcmcpu>;
+	simple-audio-card,frame-master = <&dpcmcpu>;
+
+	simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback",
+			"ak4642 Playback", "DAI1 Playback";
+
+	dpcmcpu: cpu@0 {
+		sound-dai = <&rcar_sound 0>;
+	};
+
+	cpu@1 {
+		sound-dai = <&rcar_sound 1>;
+	};
+
+	codec {
+		prefix = "ak4642";
+		sound-dai = <&ak4643>;
+		clocks = <&audio_clock>;
+	};
+};
+
+-------------------------------------------
+Example 6 - many DAI links with DPCM:
+-------------------------------------------
+
+CPU0 ------ ak4613
+CPU1 ------ PCM3168A-p  /* DPCM 1ch/2ch */
+CPU2 --/                /* DPCM 3ch/4ch */
+CPU3 --/                /* DPCM 5ch/6ch */
+CPU4 --/                /* DPCM 7ch/8ch */
+CPU5 ------ PCM3168A-c
+
+sound {
+	compatible = "simple-audio-card";
+
+	simple-audio-card,routing =
+		  "pcm3168a Playback", "DAI1 Playback",
+		  "pcm3168a Playback", "DAI2 Playback",
+		  "pcm3168a Playback", "DAI3 Playback",
+		  "pcm3168a Playback", "DAI4 Playback";
+
+	simple-audio-card,dai-link@0 {
+		format = "left_j";
+		bitclock-master = <&sndcpu0>;
+		frame-master = <&sndcpu0>;
+
+		sndcpu0: cpu {
+			sound-dai = <&rcar_sound 0>;
+		};
+		codec {
+			sound-dai = <&ak4613>;
+		};
+	};
+	simple-audio-card,dai-link@1 {
+		format = "i2s";
+		bitclock-master = <&sndcpu1>;
+		frame-master = <&sndcpu1>;
+
+		convert-channels = <8>; /* TDM Split */
+
+		sndcpu1: cpu@0 {
+			sound-dai = <&rcar_sound 1>;
+		};
+		cpu@1 {
+			sound-dai = <&rcar_sound 2>;
+		};
+		cpu@2 {
+			sound-dai = <&rcar_sound 3>;
+		};
+		cpu@3 {
+			sound-dai = <&rcar_sound 4>;
+		};
+		codec {
+			mclk-fs = <512>;
+			prefix = "pcm3168a";
+			dai-tdm-slot-num = <8>;
+			sound-dai = <&pcm3168a 0>;
+		};
+	};
+	simple-audio-card,dai-link@2 {
+		format = "i2s";
+		bitclock-master = <&sndcpu2>;
+		frame-master = <&sndcpu2>;
+
+		sndcpu2: cpu {
+			sound-dai = <&rcar_sound 5>;
+		};
+		codec {
+			mclk-fs = <512>;
+			prefix = "pcm3168a";
+			sound-dai = <&pcm3168a 1>;
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/sound/simple-scu-card.txt b/Documentation/devicetree/bindings/sound/simple-scu-card.txt
index 32f8dbce5241..3a2f71616cda 100644
--- a/Documentation/devicetree/bindings/sound/simple-scu-card.txt
+++ b/Documentation/devicetree/bindings/sound/simple-scu-card.txt
@@ -75,7 +75,6 @@ sound {
 	simple-audio-card,bitclock-master = <&dpcmcpu>;
 	simple-audio-card,frame-master = <&dpcmcpu>;
 
-	simple-audio-card,prefix = "ak4642";
 	simple-audio-card,routing = "ak4642 Playback", "DAI0 Playback",
 			"ak4642 Playback", "DAI1 Playback";
 
@@ -88,6 +87,7 @@ sound {
 	};
 
 	codec {
+		prefix = "ak4642";
 		sound-dai = <&ak4643>;
 		clocks = <&audio_clock>;
 	};
diff --git a/Documentation/devicetree/bindings/sound/sun50i-codec-analog.txt b/Documentation/devicetree/bindings/sound/sun50i-codec-analog.txt
index 4f8ad0e04d20..056a098495cc 100644
--- a/Documentation/devicetree/bindings/sound/sun50i-codec-analog.txt
+++ b/Documentation/devicetree/bindings/sound/sun50i-codec-analog.txt
@@ -4,9 +4,11 @@ Required properties:
 - compatible: must be one of the following compatibles:
 		- "allwinner,sun50i-a64-codec-analog"
 - reg: must contain the registers location and length
+- cpvdd-supply: Regulator supply for the headphone amplifier
 
 Example:
 	codec_analog: codec-analog@1f015c0 {
 		compatible = "allwinner,sun50i-a64-codec-analog";
 		reg = <0x01f015c0 0x4>;
+		cpvdd-supply = <&reg_eldo1>;
 	};
diff --git a/Documentation/devicetree/bindings/sound/xlnx,i2s.txt b/Documentation/devicetree/bindings/sound/xlnx,i2s.txt
new file mode 100644
index 000000000000..5e7c7d5bb60a
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/xlnx,i2s.txt
@@ -0,0 +1,28 @@
+Device-Tree bindings for Xilinx I2S PL block
+
+The IP supports I2S based playback/capture audio
+
+Required property:
+ - compatible: "xlnx,i2s-transmitter-1.0" for playback and
+	       "xlnx,i2s-receiver-1.0" for capture
+
+Required property common to both I2S playback and capture:
+ - reg: Base address and size of the IP core instance.
+ - xlnx,dwidth: sample data width. Can be any of 16, 24.
+ - xlnx,num-channels: Number of I2S streams. Can be any of 1, 2, 3, 4.
+		      supported channels = 2 * xlnx,num-channels
+
+Example:
+
+	i2s_receiver@a0080000 {
+		compatible = "xlnx,i2s-receiver-1.0";
+		reg = <0x0 0xa0080000 0x0 0x10000>;
+		xlnx,dwidth = <0x18>;
+		xlnx,num-channels = <1>;
+	};
+	i2s_transmitter@a0090000 {
+		compatible = "xlnx,i2s-transmitter-1.0";
+		reg = <0x0 0xa0090000 0x0 0x10000>;
+		xlnx,dwidth = <0x18>;
+		xlnx,num-channels = <1>;
+	};